Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Randomization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Random-Walk Monte Carlo Simulation of Intergranular Gas Bubble Nucleation in UO2 Fuel

Using a random-walk particle algorithm, we investigate the clustering of fission gas atoms on grain bound- aries in oxide fuels. The computational algorithm implemented in this work considers a planar surface representing a grain boundary on which particles appear at a rate dictated by the Booth flux, migrate two dimensionally according to their grain boundary diffusivity, and coalesce by random encounters. Specifically, the intergranular bubble nucleation density is the key variable we investigate using a parametric study in which the temperature, grain boundary gas diffusivity, and grain boundary segregation energy are varied. The results reveal that the grain boundary bubble nucleation density can vary widely due to these three parameters, which may be an important factor in the observed variability in intergranular bubble percolation among grain boundaries in oxide fuel during fission gas release.

36 MATERIALS SCIENCE↗

THE LOSS OF ACCURACY OF STOCHASTIC COLLOCATION METHOD IN SOLVING NONLINEAR DIFFERENTIAL EQUATIONS WITH RANDOM INPUT DATA

n this paper we show how stochastic collocation method (SCM) could fail to con- verge for nonlinear differential equations with random coefficients. First, we consider Navier-Stokes equation with uncertain viscosity and derive error estimates for stochastic collocation discretization. Our analysis gives some indicators on how the nonlinearity negatively affects the accuracy of the method. The stochastic collocation method is then applied to noisy Lorenz system. Simulation re- sults demonstrate that the solution of a nonlinear equation could be highly irregular on the random data and in such cases, stochastic collocation method cannot capture the correct solution.

Webster, Clayton G↗

Random On-Board Pixel Sampling (ROPS) X-Ray Camera

Recent advances in compressed sensing theory and algorithms offer new possibilities for high-speed X-ray camera design. In many CMOS cameras, each pixel has an independent on-board circuit that includes an amplifier, noise rejection, signal shaper, an analog-to-digital converter (ADC), and optional in-pixel storage. When X-ray images are sparse, i.e., when one of the following cases is true: (a.) The number of pixels with true X-ray hits is much smaller than the total number of pixels; (b.) The X-ray information is redundant; or (c.) Some prior knowledge about the X-ray images exists, sparse sampling may be allowed. Here we first illustrate the feasibility of random on-board pixel sampling (ROPS) using an existing set of X-ray images, followed by a discussion about signal to noise as a function of pixel size. Next, we describe a possible circuit architecture to achieve random pixel access and in-pixel storage. The combination of a multilayer architecture, sparse on-chip sampling, and computational image techniques, is expected to facilitate the development and applications of high-speed X-ray camera technology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Quantum random number generators

Random number generators include a thermal optical source and detector configured to produce random numbers based on quantum-optical intensity fluctuations. An optical flux is detected, and signals proportional to optical intensity and a delayed optical intensity are combined. The combined signals can be electrical signals or optical signals, and the optical source is selected so as to have low coherence over a predetermined range of delay times. Balanced optical detectors can be used to reduce common mode noise, and in some examples, the optical flux is directed to only one of a pair of balanced detectors.

36 MATERIALS SCIENCE↗

Gas discharge tube true random number generator

A hardware random number generator comprises a gas discharge tube, an average voltage generator, and a comparator. The gas discharge tube includes first, second, and third terminals and may generate a variable voltage on the second terminal when a supply voltage is applied to the first and third terminals. The average voltage generator receives the variable voltage from the gas discharge tube and may generate an average voltage equal to a moving average value of the variable voltage over successive periods of time. The comparator receives the variable voltage and the average voltage and may generate a random stream of data bits, such that a value of each bit varies according to the relative magnitudes of the variable voltage and the average voltage.

42 ENGINEERING↗

Quantum random number generators

Random number generators include a thermal optical source and detector configured to produce random numbers based on quantum-optical intensity fluctuations. An optical flux is detected, and signals proportional to optical intensity and a delayed optical intensity are combined. The combined signals can be electrical signals or optical signals, and the optical source is selected so as to have low coherence over a predetermined range of delay times. Balanced optical detectors can be used to reduce common mode noise, and in some examples, the optical flux is directed to only one of a pair of balanced detectors.

97 MATHEMATICS AND COMPUTING↗

Quantum random number generator

A system and method are provided to yield a QRNG based on homodyne detection of quantum noise (e.g., vacuum noise measured as shot noise) generated from a local oscillator, such as an LED. In one embodiment, a QRNG may be provided that is adjustable based on a control input to produce a random output that can be translated to one or more random data bits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Machine Learning Methods for Connection RTT and Loss Rate Estimation Using MPI Measurements Under Random Losses

Scientific computations are expected to be increasingly distributed across wide-area networks, and Message Passing Interface (MPI) has been shown to scale to support their communications over long distances. Application-level measurements of MPI operations reflect the connection Round-Trip Time (RTT) and loss rate, and machine learningmethods have been previously developed to estimate them under deterministic periodic losses. In this paper, we consider more complex, random losses with uniform, Poisson and Gaussian distributions. We study five disparate machine leaning methods, with linear and non-linear, and smooth and non-smooth properties, to estimate RTT and loss rate over 10 Gbps connections with 0–366 ms RTT. The diversity and complexity of these estimators combined with the randomness of losses and TCP’s non-linear response together rule out the selection of a single best among them; instead, we fuse them to retain their design diversity. Overall, the results show that accurate estimates can be generated at low loss ratesbut become inaccurate at loss rates 10% and higher, thereby illustrating both their strengths and limitations.

Rao, Nageswara S.↗

Random filters for enriching the discriminatory power of topological representations

Topological representations of data are inherently coarse summaries which endows them with certain desirable properties like stability but also potentially inhibits their discriminatory power relative to fine-scale learned features. In this work we present a novel framework for enriching the discriminatory power of topological representations based on random filters and capturing ``interference topology'' rather than direct topology. We show that our random filters outperform previously explored structured image filters while requiring orders of magnitude less computational time. The approach is demonstrated on the MNIST dataset but is broadly applicable across data sets and modalities. This work is concluded with a discussion of the mathematical intuition underlying the approach and identification of future directions to enable deeper understanding and theoretical results.

Jorgenson, Grayson S.↗

Random Filters for Enriching the Discriminatory Power of Topological Representations

Topological representations of data are inherently coarse summaries which endows them with certain desirable properties like stability but also potentially inhibits their discriminatory power relative to fine-scale learned features. In this work we present a novel framework for enriching the discriminatory power of topological representations based on random filters and capturing "interference topology'' rather than direct topology. We show that our random filters outperform previously explored structured image filters while requiring orders of magnitude less computational time. The approach is demonstrated on the MNIST dataset but is broadly applicable across data sets and modalities. This work is concluded with a discussion of the mathematical intuition underlying the approach and identification of future directions to enable deeper understanding and theoretical results.

Jorgenson, Grayson S.↗

Arbiter with random tie breaking

Candidates for selection in a weighted arbitration system are assigned priority weights and random weights. The winning candidate is determined using a tree of selectors such as a comparators. At each stage of the tree, the candidate having the greatest priority weight is selected to pass to the next stage. If multiple candidates are tied for the greatest priority weight, the candidate having the greatest random weight is selected to pass to the next stage.

Lesartre, Gregg B.↗

The influence of random packed column parameters on the liquid holdup and interfacial area

Abstract Carbon dioxide capture via solvent absorption in packed columns has emerged as a potential technology to mitigate coal‐fired power plant CO 2 emissions. Parameters, including packing types, solvent properties, and operating conditions, could potentially affect the packed column CO 2 capture efficiency. To understand the importance of those parameters and help packed column optimization, a design of experiments (DoEs) method was proposed to generate input parameter matrix. Combined with multiphase computational fluid dynamics (CFD), the random packed column parameter influence on the liquid holdup and interfacial area can be efficiently investigated. Surrogate‐based sensitivity analysis shows that the solvent flow rate and contact angle are key factors dictating liquid holdup and interfacial area. On the other hand, solvent viscosity has a marginal impact on the interfacial area. The sensitivity scores were calculated for each input parameter to guide the selection of dimensionless numbers for the liquid holdup and interfacial area correlation development.

42 ENGINEERING↗

Calculating beta decay in the deformed self-consistent quasiparticle random phase approximation

We discuss a recent global calculation of beta-decay rates in the self-consistent Skyrme quasiparticle random phase approximation (QRPA), with axially symmetric nuclear deformation treated explicitly. The calculation makes makes use of the finite-amplitude method, first proposed by Nakatsukasa and collaborators, to reduce computation time. The results are comparable in quality to those of several other global QRPA calculations. The QRPA may have reached the limit of its accuracy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling household-level party composition behavior for multiparty activities: a random parameter nested logit modeling approach

This study presents findings of a household-level party composition model for multiparty activities. It exploits data from a comprehensive Household Travel Survey conducted by Chicago Metropolitan Agency of Planning. The study estimates a random parameter nested logit model to capture households’ unobserved preference heterogeneity and non-proportional substitution patterns in terms of activity party composition for multiparty activities. A wide variety of household demographics, activity attributes and residential neighborhood characteristics are examined in this paper. The magnitude of the impacts of the determinants are tested in this study by analyzing the elasticity of the variables, which suggests that household demographics and attributes of the multiparty activities have significant effects on the household-level activity party composition. Residential neighborhood characteristics, although somewhat less impactful, still play a meaningful role. This model will be implemented within the POLARIS transportation systems simulator to improve the activity generation modeling workflow, and the prediction accuracy of various activity-travel components.

activity party composition↗

Seed classification with random forest models

Premise: To improve forest conservation monitoring, we developed a protocol to automatically count and identify the seeds of plant species with minimal resource requirements, making the process more efficient and less dependent on human operators. Methods and Results: Seeds from six North American conifer tree species were separated from leaf litter and imaged on a flatbed scanner. In the most successful species-classification approach, an ImageJ macro automatically extracted measurements for random forest classification in the software R. The method allows for good classification accuracy, and the same process can be used to train the model on other species. Conclusions: This protocol is an adaptable tool for efficient and consistent identification of seed species or potentially other objects. Automated seed classification is efficient and inexpensive, making it a practical solution that enhances the feasibility of large-scale monitoring projects in conservation biology.

59 BASIC BIOLOGICAL SCIENCES↗

A GPU Accelerated Mixed‐Precision Finite Difference Informed Random Walker (FDiRW) Solver for Strongly Inhomogeneous Diffusion Problems

In nature, many complex multi‐physics coupling problems exhibit significant diffusivity inhomogeneity, where one process occurs several orders of magnitude faster than others temporally. Simulating rapid diffusion alongside slower processes demands intensive computational resources due to the necessity for small time steps. To address these computational challenges, we have developed an efficient numerical solver named Finite Difference informed Random Walker (FDiRW). In this study, we propose a GPU‐accelerated, mixed‐precision configuration for the FDiRW solver to maximize efficiency through GPU multi‐threaded parallel computation and lower precision computation. Numerical evaluation results reveal that the proposed GPU‐accelerated mixed‐precision FDiRW solver can achieve a 117× speedup over the CPU baseline, while an additional 1.75× speedup is achieved by employing lower precision GPU computation. Notably, for large model sizes, the GPU‐accelerated mixed‐precision FDiRW solver demonstrates strong scaling with the number of nodes used in simulation. When simulating radionuclide absorption processes by porous wasteform particles with a medium‐sized model of 192 × 192 × 192, this approach reduces the total computational time to 10 min, enabling the simulation of larger systems with strongly inhomogeneous diffusivity.

97 MATHEMATICS AND COMPUTING↗

Effects of random forest modeling decisions on biogeochemical time series predictions

Abstract Random forests (RF) are an increasingly popular machine learning approach used to model biogeochemical processes in the Earth system. While RF models are robust to many assumptions that complicate deterministic models, there are several important parameterization decisions for appropriate use and optimal model fit. We explored the role that parameter decisions, including training/testing data splitting strategies, variable selection, and hyperparameters play on RF goodness‐of‐fit by constructing models using 1296 unique parameter combinations to predict concentrations of nitrate, a key nutrient for biogeochemical cycling in aquatic ecosystems. Models were built on long‐term, publicly available water quality and meteorology time series collected by the National Estuarine Research Reserve monitoring network for two contrasting ecosystems representing freshwater and brackish estuaries. We found that accounting for temporal dependence when splitting data into training and testing subsets was key for avoiding over‐estimation of model predictive power. In addition, variable selection, the ratio of training to testing data, and to a lesser degree, variables per split and number of trees, were significant parameters for optimizing RF goodness‐of‐fit. We also explored how model parameter decisions influenced interpretation of the relative importance of predictors to the model, and model predictor‐dependent variable relationships, with results suggesting that both data structure and model parameterization influence these factors. Because much of the current RF literature is written for the computational and statistical science communities, the primary goal of this study is to provide guidelines for aquatic scientists new to machine learning to apply RF techniques appropriately to aquatic biogeochemical datasets.

54 ENVIRONMENTAL SCIENCES↗