Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RELEASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Gas release and ordering of carbon in the Allende meteorite

An attempt is made to ascertain whether the inert gas atoms leave their carrier phases by volume diffusion, with intact internal phase frameworks, or are instead expelled from the solids as a results of substantial rearrangement, during release from samples of the Allende carbonaceous meteorite. Gas release over the 300-1100 C range was followed by Raman spectroscopic studies in the 1360 and 1580/cm wavelength bands of carbon. The results obtained indicate that the gas release at high temperatures is causally related to the ordering of carbon.

Heymann, D.↗

Convergence of strain energy release rate components for edge-delaminated composite laminates

Strain energy release rates for edge delaminated composite laminates were obtained using quasi 3 dimensional finite element analysis. The problem of edge delamination at the -35/90 interfaces of an 8-ply composite laminate subjected to uniform axial strain was studied. The individual components of the strain energy release rates did not show convergence as the delamination tip elements were made smaller. In contrast, the total strain energy release rate converged and remained unchanged as the delamination tip elements were made smaller and agreed with that calculated using a classical laminated plate theory. The studies of the near field solutions for a delamination at an interface between two dissimilar isotropic or orthotropic plates showed that the imaginary part of the singularity is the cause of the nonconvergent behavior of the individual components. To evaluate the accuracy of the results, an 8-ply laminate with the delamination modeled in a thin resin layer, that exists between the -35 and 90 plies, was analyzed. Because the delamination exists in a homogeneous isotropic material, the oscillatory component of the singularity vanishes.

Raju, I. S.↗

Ion beam releases at rocket altitudes

NASA Flight 29.015 was the third in a series of flights to study the electrodynamics of man-produced ion beams in the ionosphere. Much like an earlier flight (Moore at al., 1982 and 1983; Kaufman et al., 1985), plasma releases perpendicular to the earth's B field result in ions being measured, often at reduced energies, several hundred meters from the source along the magnetic field. Releases at 200-eV energy parallel to B, however, result in over-200-eV ions measured above the source. In addition, parallel ion releases result in two additional populations of ions seen near 90-deg pitch angle; one near the energy of the generator, and the other at considerably lower energy. The energization of parallel ions could result from the same process by which electrons were accelerated to the generator payload as measured on an earlier flight, presumably due to blockage of natural field-aligned currents by gun-related wave turbulence. This turbulence is also undoubtedly inherent in the mechanism by which a parallel beam of ions creates a perpendicular component.

Pollock, C. J.↗

Nature and the nonlinear evolution of electrostatic waves associated with the AMPTE solar wind releases

The nonlinear evolution of the electrostatic waves observed during the AMPTE (Active Magnetosphere Particle Tracer Explorers) solar wind releases is investigated. Previous linear studies indicate two distinct sets of instabilities may be responsible for the generation. One set consists of ion-acoustic type instabilities which are insensitive to the presence of a background magnetic field, while the other group corresponds to the modified two stream instabilities and requires the solar wind flow to be across the ambient magnetic field. To establish which set of instabilities is more viable a detailed linear Vlasov theory has been conducted by numerically solving the full electromagnetic dispersion relation. In addition both the plasma wave as well as the magnetic field measurements by the IRM (Ion Release Module) spacecraft were used to correlate the frequency and the power of the observed waves with the magnitude and the direction of the solar wind magnetic field. The results of these analyses indicate that the ion-acoustic type instabilities have growth rates that are an order of magnitude or more larger than those of the modified two stream instabilities. Results show that both the solar wind protons and the released ions may be heated and accelerated in the directions oblique to the solar wind flow velocity.

Omidi, N.↗

Noble gases released by vacuum crushing of EETA 79001 glass

An EETA 79001 glass sample was crushed in a vacuum to observe the gases released. About 15 pct of the total gas concentrations were a mixture of a small amount of SPB-type gas with larger proportions of another air-like component. Less than 5 pct of the SPB gas was released by crushing, while 36-40 pct of the EETV (indigenous) gas was crush-released. The results are consistent with a siting of the EETV component in 10-100 micron vesicles seen in the glass. It is suggested that the SPB component is either in vesicles less than 6 microns in diameter or is primarily sited elsewhere.

Wiens, R. C.↗

Strain energy release rate analysis of the end-notched flexure specimen using the finite-element method

Two-dimensional finite-element analysis of the end-notched flexure specimen was performed using 8-node isoparametric, parabolic elements to evaluate compliance and mode II strain energy release rates, G sub II. The G sub II values were computed using two different techniques: the virtual crack-closure technique (VCCT) and the rate of change of compliance with crack length (compliance derivative method). The analysis was performed for various crack-length-to-semi-span (a/L) ratios ranging from 0.2 to 0.9. Three material systems representing a wide range of material properties were analyzed. The compliance and strain energy release rates of the specimen calculated with the present finite-element analysis agree very well with beam theory equations including transverse shear. The G sub II values calculated using the compliance derivative method compared extremely well with those calculated using the VCCT. The G sub II values obtained by the compliance derivative method using the top or bottom beam deflections agreed closely with each other. The strain energy release rates from a plane-stress analysis were higher than the plane-strain values by only a small percentage, indicating that either assumption may be used in the analysis. The G sub II values for one material system calculated from the finte-element analysis agreed with one solution in the literature and disagreed with the other solution in the literature.

Salpekar, S. A.↗

Recharge of the early atmosphere of Mars by impact-induced release of CO2

The question as to whether high impact rates early in the history of Mars could have aided in maintaining a relatively thick CO2 atmosphere is discussed. Such impacts could have released CO2 into the atmosphere by burial, by shock-induced release during impact events, and by the addition of carbon to Mars from the impacting bolides. On the assumption that cratering rates on Mars were comparable to those of the moon's Nectarial period, burial rates are a result of 'impact gardening' at the end of heavy bombardment are estimated to have ranged from 20 to 45 m/million years; at these rates, 0.1-0.2 bar of CO2 would have been released every 10 million years as a result of burial to depths at which carbonate dissociation temperatures are encountered.

Carr, Michael H.↗

Mechanism For Guided Release

Proposed mechanism retains protective shield until no longer needed, then releases shield and guides it away for safe ejection from vehicle (spacecraft, according to original concept). Intended for use with shield like one described in article "Crash-Resistant Shield" (NPO-17616). Mechanism for guided release separates shield from base and from supporting truss on command. Band holding shield on base released by explosive separator.

Kull, Richard A.↗

Double-Swivel Mechanism For Reliable Release

Double-swivel toggle mechanism releases large, heavy objects reliably. Double-swiveling action of mechanism ensures it clears restraining pins upon release. Pins retain toggle and its load. If pin fails to withdraw at designated time for releasing payload, toggle swivels about its upper ball, and ring swivels about lower ball so ring flange clears failed pin. Double-swivel action ensures disengagement even it two pins fail to withdraw.

King, Guy L.↗

A simplified approach to strain energy release rate computations for interlaminar fracture of composites

A simple approach for the strain energy release rate computations based on the finite element method and a singular fitting model is presented. The model uses the stress and displacement distributions at the delamination front. The method is applied to a mixed-mode double cracked-lap-shear composite configuration. The strain energy release rate components predicted by the model are compared with the finite element crack-closure method. The effect of the mesh size on the stress and displacement distribution is isolated. The strain energy release rates predicted by relatively coarse mesh sizes are in good agreement with the finite element crack closure method.

Armanios, Erian A.↗

Calculated emission rates for barium releases in space

The optical emissions from barium releases in space are caused by resonance and fluorescent scattering of sunlight. Emission rates for the dominant ion and neutral lines are calculated assuming the release to be optically thin and the barium to be in radiative equilibrium with the solar radiation. The solar spectrum has deep Fraunhofer absorption lines at the primary barium ion resonances. A velocity component toward or away from the sun will Doppler shift the emission lines relative to the absorption lines and the emission rates will increase many-fold over the rest value. The Doppler brightening is important in shaped charge or satellite releases where the barium is injected at high velocities. Emission rates as a function of velocity are calculated for the 4554, 4934, 5854, 6142 and 6497 A ion emission lines and the dominant neutral line at 5535 A. Results are presented for injection parallel to the ambient magnetic field, B, and for injection at an angle to B.

Stenbaek-Nielsen, H. C.↗

The meridional scale of baroclinic waves with latent heat release

The control on the meridional scale of a class of the baroclinic waves exercised by latent heat release is analyzed. A meridional-scale equation is derived, in which the dry model and the moist model without the meridional variation of the baroclinic waves are revealed. It is shown that, in the dry model the stability analysis cannot determine the meridional scale of the baroclinic waves. When latent heat release is included, the meridional variation of the waves either vanishes or is finite. When the waves have the meridional variation with latent heat release, the growth rate increases as the heating increases for a given Froude number, and there are two modes - the first mode has a small ascending region and a large descending region, while the second mode has a small descending region and a large ascending region.

Tang, Chung-Muh↗

Kinetics of hydrogen release from lunar soil

With increasing interest in a lunar base, there is a need for extensive examination of possible lunar resources. Hydrogen will be needed on a lunar base for many activities including providing fuel, making water, and serving as a reducing agent in the extraction of oxygen from its ores. Previous studies have shown the solar wind has implanted hydrogen in the lunar regolith and that hydrogen is present not only in the outer layer of soil but to considerable depths, depending on the sampling site. If this hydrogen is to be mined and used on the lunar surface, a number of questions need to be answered. How much energy must be expended in order to release the hydrogen from the soil. What temperatures must be attained, and how long must the soil be heated. This study was undertaken to provide answers to practical questions such as these. Hydrogen was determined using a Pyrolysis/GC technique in which hydrogen was released by heating the soil sample contained in a quartz tube in a resistance wire furnace, followed by separation and quantitative determination using a gas chromatograph with a helium ionization detector. Heating times and temperatures were varied, and particle separates were studied in addition to bulk soils. The typical sample size was 10 mg of lunar soil. All of the soils used were mature soils with similar hydrogen abundances. Pre-treatments with air and steam were used in an effort to find a more efficient way of releasing hydrogen.

Bustin, Roberta↗

Two fault tolerant toggle-hook release

A coupling device is disclosed which is mechanically two fault tolerant for release. The device comprises a fastener plate and fastener body, each of which is attachable to a different one of a pair of structures to be joined. The fastener plate and body are coupled by an elongate toggle mounted at one end in a socket on the fastener plate for universal pivotal movement thereon. The other end of the toggle is received in an opening in the fastener body and adapted for limited pivotal movement therein. The toggle is adapted to be restrained by three latch hooks arranged in symmetrical equiangular spacing about the axis of the toggle, each hook being mounted on the fastener body for pivotal movement between an unlatching non-contact position with respect to the toggle and a latching position in engagement with a latching surface of the toggle. The device includes releasable lock means for locking each latch hook in its latching position whereby the toggle couples the fastener plate to the fastener body and means for releasing the lock means to unlock each said latch hook from the latch position whereby the unlocking of at least one of the latch hooks from its latching position results in the decoupling of the fastener plate from the fastener body.

Graves, Thomas Joseph↗

Collisionless coupling processes in AMPTE releases

An evaluation is made of results obtained to date by in situ measurements, numerical simulations, and theoretical considerations of Active Magnetospheric Particle Tracer Explorer chemical releases bearing on the nature of collisionless coupling processes. It is noted that both laminar and turbulent forces act to couple the solar wind momentum and energy to the release cloud; the magnetic field compression formed in this interaction plays an important intermediary role in coupling the two plasmas, and the intense electrostatic turbulence generated enhances the interaction. A scenario accounting for several features in the observed evolution of the December 27, 1984 artificial comet release is presented.

Lui, A. T. Y.↗

Strain energy release rate distributions for double cantilever beam specimens

A 24-ply composite double cantilever-beam specimen under mode I (opening) loading has been analyzed by a 3D FEM code that calculated along a straight delamination starter for several different specimen materials. An isotropic specimen was found to have a strain-energy release rate distribution which varied along its delamination front due to the boundary-layer effect and another effect associated with the anticlastic curvature of the bent specimen arms. A 0-deg graphite-reinforced epoxy specimen had a nearly-uniform strain-energy release rate distribution which dropped only near the edge, due to the boundary-layer effect, and a +/- 45-deg graphite/epoxy specimen exhibited a pronounced strain-energy release rate variation across the specimen width.

Crews, J. H., Jr.↗

An experimental study of the sublimation of water ice and the release of trapped gases

The release of the more volatile component of the Ar/H2O, CO/H2O, and CO2/H2O mixtures presently studied during sublimation is found to occur in several discrete temperature regions; gas release correlates with IR spectrum changes of the solid ice. Relative peak intensities during warming are noted to depend on the initial gas/H2O ratio. The irradiation of CO- or CO2-containing ices respectively led to the release of CO2 and CO, as well as the initial species. The implications of these results for cometary behavior are discussed.

Hudson, R. L.↗

Crystallization, sublimation, and gas release in the interior of a porous comet nucleus

A numerical code is developed for evolutionary calculations of the thermal structure and composition of a porous comet nucleus made of water ice, in amorphous or crystalline form, other volatiles, dust, and gases trapped in amorphous ice. Bulk evaporation, crystallization, gas release, and free (Knudsen) flow of gases through the pores are taken into account. The numerical scheme yields exact conservation laws for mass and energy. The code is used to study the effect of bulk evaporation of ice in the interior of a comet nucleus during crystallization. It is found that evaporation controls the temperature distribution; the vapor prevents cooling of the crystallized layer of ice, by recondensation and release of latent heat. Thus high temperatures are maintained below the surface of the nucleus and down to depths of tens or hundreds of meters, even at large heliocentric distances, as long as crystallization goes on. Gas trapped in the ice and released during the phase transition flows both toward the interior and toward the surface and out of the nucleus. The progress of crystallization is largely determined by the contribution of gas fluxes to heat transfer.

Prialnik, Dina↗