Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pyridine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Promotion of adsorptive and catalytic properties of zeolitic Brønsted acid sites by proximal extra-framework Si(OH) x groups

Steric confinement in zeolites influences the catalytic conversion of alkanes. For zeolitic Brønsted acid sites, proximate extra-framework species introduce additional confinement to the pore constraints, enhancing the catalytic activity of alkane cracking. Although extra-framework alumina has been the most studied, here we report the element-specific impact of silica species. Further, by grafting extra-framework silica species close to Brønsted acid sites in H-ZSM-5 zeolite, the binding of bases like pyridine and amines is strengthened via van der Waals interactions with their aryl or alkyl chains. Brønsted acid sites close to extra-framework silica achieve a higher reaction rate of protolytic cracking of n-pentane via enthalpic (unlike entropic, as with extra-framework alumina) stabilization of the transition state by 24–51 kJ mol −1 . The lower activation energy points to an earlier transition state than in the presence of extra-framework alumina, with a better stabilization of the carbonium ions in the transition state compared to the parent zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the thermal activation atmosphere breaks the activity–stability trade-off of Fe–N–C oxygen reduction fuel cell catalysts

Fe–N–C catalysts are the most promising platinum group metal-free oxygen-reduction catalysts, but they suffer from a low density of active metal sites and the so-called activity–stability trade-off. Here we report an Fe–N–C catalyst prepared by adding an optimal amount of H 2 to the traditional inert atmosphere during the thermal activation. The presence of H 2 significantly increases the total density of FeN 4 sites, suppressing the unstable pyrrolic-N-coordinated S1 sites and favouring the stable pyridinic-N-coordinated S2 sites with shortened Fe–N bond lengths. Here, we propose that the intrinsically stable S2 sites are probably arranged in well-graphitized carbon layers, and the S1 sites exist in less-graphitized carbon. H 2 could remove unstable S1 sites and retain stable S2 sites during the pyrolysis to break the challenging activity–stability trade-off. The Fe–N–C catalyst in membrane electrode assemblies maintains a current density of 67 mA cm -2 at 0.8 V (H 2 –air) after 30,000 voltage cycles (0.60 to 0.95 V under H 2 –air), achieving encouraging durability and performance simultaneously.

25 ENERGY STORAGE↗

A modular molecular framework for utility in small-molecule solution-processed organic photovoltaic devices

We report on the design, synthesis and characterization of light harvesting small molecules for use in solution-processed small molecule bulk heterojunction (SM-BHJ) solar cell devices. These molecular materials are based upon an acceptor/donor/acceptor (A/D/A) core with donor endcapping units. Utilization of a dithieno(3,2-b;2',3'-d)silole (DTS) donor and pyridal[2,1,3]thiadiazole (PT) acceptor leads to strong charge transfer characteristics, resulting in broad optical absorption spectra extending well beyond 700 nm. SM-BHJ solar cell devices fabricated with the specific example 5,5'-bis{7-(4-(5-hexylthiophen-2-yl)thiophen-2-yl)-[1,2,5]thiadiazolo[3,4-c]pyridine}-3,3'-di-2-ethylhexylsilylene-2,2'-bithiophene (6) as the donor and [6,6]-phenyl-C 71 -butyric acid methyl ester (PC 71 BM) as the acceptor component showed short circuit currents above -10 mA cm -2 and power conversion efficiencies (PCEs) over 3%. Thermal processing is a critical factor in obtaining favorable active layer morphologies and high PCE values. A combination of UV-visible spectroscopy, conductive and photo-conductive atomic force microscopies, dynamic secondary mass ion spectrometry (DSIMS), and grazing incident wide angle X-ray scattering (GIWAXS) experiments were carried out to characterize how thermal treatment influences the active layer structure and organization.

14 SOLAR ENERGY↗

Template directed assembly of dynamic micellar nanoparticles

The ability to pattern functional nanoparticle arrays in multiple dimensions will enable future devices which exhibit functions that cannot be realized using unstructured nanoparticle arrays. Here we demonstrate the unique assembly properties of dynamic micellar nanoparticles by combining a top down lithographic nanopatterning technique with a solution-based bottom up self-assembly. The templates for the directed self-assembly of the micelles consisted of arrays of cylindrical recess features fabricated by nanoimprint lithography. Silica was coated on this patterned substrate and subsequently selectively functionalized with a positively charged molecular monolayer (N-(3-Trimethoxysilylpropyl) diethylenetriamine) to regulate the micelle-surface interactions. The self-assembled block co-polymer polystyrene-b-poly(4-vinyl pyridine) (PS 480k –PVP 145k ) micelles were approximately 325nm in diameter in aqueous solutions (pH = 2.5) and 50nm in diameter in the dry state. The average number of micelles assembled per feature increased from less than 1 to 12 with increasing feature diameter in the range of 200nm–1μm. Using a 2D model for maximum packing of circles in circular host features, the effective sphere size of the micelles during assembly was calculated to be 250nm in diameter. Thus, the micelles exhibited three characteristic sizes during assembly, 325nm in bulk solution, 250nm during assembly, and 50nm in the dry state. Furthermore, this dramatic variation in nanoparticle volume during the assembly process offers unique opportunities for forming nanometre scale, multidimensional arrays not accessible using hard sphere building blocks.

42 ENGINEERING↗

In situ nitrogen-doped graphene grown from polydimethylsiloxane by plasma enhanced chemical vapor deposition

Due to its unique electronic properties and wide spectrum of promising applications, graphene has attracted much attention from scientists in various fields. Control and engineering of graphene’s semiconducting properties is considered to be the key of its applications in electronic devices. Here, we report a novel method to prepare in situ nitrogen-doped graphene by microwave plasma assisted chemical vapor deposition (CVD) using PDMS (Polydimethylsiloxane) as a solid carbon source. Based on this approach, the concentration of nitrogen-doping can be easily controlled via the flow rate of nitrogen during the CVD process. X-ray photoelectron spectroscopy results indicated that the nitrogen atoms doped into graphene lattice were mainly in the forms of pyridinic and pyrrolic structures. Moreover, first-principles calculations show that the incorporated nitrogen atoms can lead to p-type doping of graphene. This in situ approach provides a promising strategy to prepare graphene with controlled electronic properties.

Chemical vapor deposition↗

Introduction of nitrogen with controllable configuration into graphene via vacancies and edges

Doping with nitrogen in controllable configurations is very valuable to tailor the properties of graphene. Here we report density-functional theory calculations of chemical reactions of ammonia, a widely used nitrogen source, at vacancies and edges of graphene, through which we explore strategies to achieve N-doped graphene with optimized properties. Here, we show that at different defects, ammonia reacts to form nitrogen impurities in distinct configurations, i.e. graphitic-N at single vacancies, pyridinic- or pyrrolic-N at divacancies, pyrrolic-N at armchair edges, and N in a four-member ring at zigzag edges. Moreover, different nitrogen-related defect configurations introduce distinct changes in the electronic structure of graphene. By calculating the core level shift of C 1s electrons, we find configuration-dependent redistribution of electrons around the N-dopant. A discussion of how to achieve optimized doping and enhanced chemical reactivity in experiments is included.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Zn2+ sensing using a modified bipyridine complex

A novel fluorescent Zn2+ sensor, 4-(pyridin-2-yl)-3H-pyrrolo[2, 3-c]quinoline (PPQ), has been designed, synthesized and characterized by various spectroscopic and analytical techniques. PPQ exhibits superior detection of Zn2+ in the presence of various cations tested, including Cd2+ and Hg2+, via wavelength shifted fluorescence intensity enhancement. The emission wavelength at 500 nm, ensures probable noninterference from cellular components while performing biological applications.

Akula, Mahesh↗

Iridium( iii ) catalyzed trifluoroacetoxylation of aromatic hydrocarbons

A tridentate, NNC-tb (where NNC-tb = 2-(pyridin-2-yl)benzo[ h ]quinoline) ligated Ir III complex (NNC-tb)Ir(Ph)(4-MePy)(TFA), 11 along with analogues are very active for CH activation as evidenced by rapid catalytic H/D exchange between benzene and trifluoroacetic acid – d 1 (DTFA).

catalysis (homogeneous), catalysis (heterogeneous)↗

A divergent route to core- and peripherally functionalized diazacoronenes that act as colorimetric and fluorescence proton sensors

Combining core annulation and peripheral group modification, we have demonstrated a divergent synthesis of a family of highly functionalized coronene derivatives from a readily accessible dichlorodiazaperylene intermediate. Various reactions, such as aromatic nucleophilic substitution, Kumada coupling and Suzuki coupling proceed effectively on α-positions of the pyridine sites, giving rise to alkoxy, thioalkyl, alkyl or aryl substituted polycyclic aromatic hydrocarbons. In addition to peripheral group modulation, the aromatic core structures can be altered by annulation with thiophene or benzene ring systems. Corresponding single crystal X-ray diffraction and optical studies indicate that the heteroatom linkages not only impact the solid state packing, but also significantly influence the optoelectronic properties. Furthermore, these azacoronene derivatives display significant acid-induced spectroscopic changes, suggesting their great potential as colorimetric and fluorescence proton sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of the coordination preferences and catalytic pathways of heteroaxial cobalt oximes towards hydrogen generation

Three new heteroaxial cobalt oxime catalysts, namely [Co III (prdioxH)( 4tBu py)(Cl)]PF 6 (1), [Co III (prdioxH)( 4Pyr py)(Cl)]PF 6 (2), and [Co III (prdioxH)( 4Bz py)(Cl)]PF 6 (3) have been studied. These species contain chloro and substituted tert-butyl/pyrrolidine/benzoyl-pyridino ligands axially coordinated to a trivalent cobalt ion bound to the N 4 -oxime macrocycle (2 E ,2' E ,3 E ,3' E )-3,3'-(propane-1,3-diylbis(azanylylidene))bis(butan-2-one)dioxime, abbreviated (prdioxH)– in its monoprotonated form. Emphasis was given to the spectroscopic investigation of the coordination preferences and spin configurations among the different 3d 6 Co III , 3d 7 Co II , and 3d 8 Co I oxidation states of the metal, and to the catalytic proton reduction with an evaluation of the pathways for the generation of H 2 via Co III –H – or Co II –H – intermediates by mono and bimetallic routes. The strong field imposed by the (prdioxH)– ligand precludes the existence of high-spin configurations, and 6-coordinate geometry is favored by the LS Co III species. Species 1 and 3 show a split Co III /Co II electrochemical wave associated with partial chemical conversion to a [Co III (prdioxH)Cl 2 ] species, whereas 2 shows a single event. The reduction of these Co III complexes yields LS Co II and LS Co I species in which the pyridine acts as the dominant axial ligand. In the presence of protons, the catalytically active Co I species generates a Co III –H – hydride species that reacts heterolytically with another proton to generate dihydrogen. The intermediacy of a trifluoroacetate-bound Co III /Co II couple in the catalytic mechanism is proposed. Finally, these results allow for a generalization of the behavior of heteroaxial cobalt macrocycles and serve as guidelines for the development of new catalysts based on macrocyclic frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Guest-tuned spin crossover in flexible supramolecular assemblies templated by a halide (Cl - , Br - or I - )

Ligand 1,3-bis(3-(pyridin-2-yl)-1H-pyrazol-5-yl)benzene, L, forms mononuclear spin crossover complexes [FeL 3 ] 2+ with pendant arms that cause them to dimerize through numerous intermolecular interactions forming supramolecular (X@[FeL 3 ] 2 ) 3+ cations. Finally, hey have the flexibility to encapsulate Cl - , Br - or I - , which allow tuning the magnetic properties, in the solid state and in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of a series of nickel( ii ) alkoxide precursors and their utility for Ni(0) nanoparticle production

We synthesized a series of nickel(II) aryloxide ([Ni(OAr) 2 (py) x ]) precursors from an amide-alcohol exchange using [Ni(NR 2 ) 2 ] in the presence of pyridine (py). The H-OAr selected were the mono- and di-ortho-substituted 2-alkyl phenols: alkyl = methyl (H-oMP), iso-propyl (H-oPP), tert-butyl (H-oBP) and 2,6-di-alkyl phenols (alkyl = di-iso-propyl (H-DIP), di-tert-butyl (H-DBP), di-phenyl (H-DPhP)). Furthermore, the crystalline products were solved as solvated monomers and structurally characterized as [Ni(OAr) 2 (py) x ], where x = 4: OAr = oMP (1), oPP (2); x = 3: OAr = oBP (3), DIP (4); x = 2: OAr = DBP (5), DPhP (6). The excited states (singlet or triplet) and various geometries of 1–6 were identified by experimental UV-vis and verified by computational modeling. Magnetic susceptibility of the representative compound 4 was fit to a Curie Weiss model that yielded a magnetic moment of 4.38(3)μ B consistent with a Ni 2+ center. Compounds 1 and 6 were selected for decomposition studied under solution precipitation routes since they represent the two extremes of coordination. The particle size and crystalline structure were characterized using transmission electron microscopy (TEM) and powder X-ray diffraction (PXRD). Finally, the materials isolated from 1 and 6 were found by TEM to form irregular shape nanomaterials (8–15 nm), which by PXRD were found to be Ni 0 hcp (PDF: 01-089-7129) and fcc (PDF: 01-070-0989), respectively.

36 MATERIALS SCIENCE↗

Hydricity, electrochemistry, and excited-state chemistry of Ir complexes for CO 2 reduction

Here, we prepared electron-rich derivatives of [Ir(tpy)(ppy)Cl] + with modification of the bidentate (ppy) or tridentate (tpy) ligands in attempt to increase the reactivity for CO 2 reduction and the ability to transfer hydrides (hydricity). Density functional theory (DFT) calculations reveal that complexes with dimethyl-substituted ppy have similar hydricities to the non-substituted parent complex, and photocatalytic CO 2 reduction studies show selective CO formation. Substitution of tpy for bis(benzimidazole)-phenyl or -pyridine (L3 and L4, respectively) induces changes in the physical properties much more pronounced than addition of methyl groups to ppy. Theoretical data predict [Ir(L3)(ppy)(H)] is the strongest hydride donor among complexes studied in this work, but [Ir(L3)(ppy)(NCCH 3 )] + cannot be reduced photochemically because the excited state reduction potential is only 0.52 V due to the negative ground state potential of –1.91 V. The excited state [Ir(L4)(ppy)(NCCH 3 )] 2+ is the strongest oxidant among complexes studied in this work and the singly reduced species is formed readily upon photolysis in the presence of tertiary amines. Both [Ir(L3)(ppy)(NCCH 3 )] + and [Ir(L4)(ppy)(NCCH 3 )] 2+ exhibit electrocatalytic current for CO 2 reduction. While a significantly greater overpotential is needed for the L3 complex, a small amount of formate (5-10 %) generation in addition to CO was observed as predicted by the DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of acidic compounds in complex biomass-derived streams

Biomass-derived streams that contain acidic compounds from the degradation of lignin and polysaccharides (e.g. black liquor, pyrolysis oil, pyrolytic lignin, etc.) are chemically complex solutions prone to instability and degradation during analysis, making quantification of compounds within them challenging. Here we present a robust analytical method to quantify acidic compounds in complex biomass-derived mixtures using ion exchange, sample reconstitution in pyridine and derivatization with BSTFA. The procedure is based on an earlier method originally reported for kraft black liquors and, in this work, is applied to identify and quantify a large slate of acidic compounds in corn stover derived alkaline pretreatment liquor (APL) as a function of pretreatment severity. Analysis of the samples is conducted with GCxGC-TOFMS to achieve good resolution of the components within the complex mixture. The results reveal the dominant low molecular weight components and their concentrations as a function of pretreatment severity. Application of this method is also demonstrated in the context of lignin conversion technologies by applying it to track the microbial conversion of an APL substrate. Here as well excellent results are achieved, and the appearance and disappearance of compounds is observed in agreement with the known metabolic pathways of two bacteria, indicating the sample integrity was maintained throughout analysis. Finally, it is shown that this method applies more generally to lignin-rich materials by demonstrating its usefulness in analysis of pyrolysis oil and pyrolytic lignin.

09 BIOMASS FUELS↗

Co/NHPI-mediated aerobic oxygenation of benzylic C–H bonds in pharmaceutically relevant molecules

A simple cobalt(II)/N-hydroxyphthalimide catalyst system has been identified for selective conversion of benzylic methylene groups in pharmaceutically relevant (hetero)arenes to the corresponding (hetero)aryl ketones. The radical reaction pathway tolerates electronically diverse benzylic C–H bonds, contrasting recent oxygenation reactions that are initiated by deprotonation of a benzylic C–H bond. The reactions proceed under practical reaction conditions (1 M substrate in BuOAc or EtOAc solvent, 12 h, 90–100 °C), and they tolerate common heterocycles, such as pyridines and imidazoles. A cobalt-free, electrochemical, NHPI-catalyzed oxygenation method overcomes challenges encountered with chelating substrates that inhibit the chemical reaction. The utility of the aerobic oxidation method is showcased in the multigram synthesis of a key intermediate towards a drug candidate (AMG 579) under process-relevant reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoinduced electron transfer from rylenediimide radical anions and dianions to Re(bpy)(CO) 3 using red and near-infrared light

A major goal of artificial photosynthesis research is photosensitizing highly reducing metal centers using as much as possible of the solar spectrum reaching Earth's surface. The radical anions and dianions of rylenediimide (RDI) dyes, which absorb at wavelengths as long as 950 nm, are powerful photoreductants with excited state oxidation potentials that rival or exceed those of organometallic chromophores. These dyes have been previously incorporated into all-organic donor–acceptor systems, but have not yet been shown to reduce organometallic centers. This study describes a set of dyads in which perylenediimide (PDI) or naphthalenediimide (NDI) chromophores are attached to Re(bpy)(CO) 3 through either the bipyridine ligand or more directly to the Re center via a pyridine ligand. The chromophores are reduced with a mild reducing agent, after which excitation with long-wavelength red or near-infrared light leads to reduction of the Re complex. The kinetics of electron transfer from the photoexcited anions to the Re complex are monitored using transient visible/near-IR and mid-IR spectroscopy, complemented by theoretical spectroscopic assignments. The photo-driven charge shift from the reduced PDI or NDI to the complex occurs in picoseconds regardless of whether PDI or NDI is attached to the bipyridine or to the Re center, but back electron transfer is found to be three orders of magnitude slower with the chromophore attached to the Re center. These results will inform the design of future catalytic systems that incorporate RDI anions as chromophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphate modified ceria as a Brønsted acidic/redox multifunctional catalyst

Deposition of trimethylphosphate onto ceria followed by thermal treatment resulted in the formation of surface phosphates with retention of the ceria fluorite structure. The structural and chemical properties of the phosphate-functionalized ceria were studied using 31 P solid-state NMR, XPS, zeta titration, ammonia thermal desorption, pyridine adsorption, and model reactions. The introduction of phosphates generated Brønsted acid sites and decreased the number of Lewis acid sites on the surface. The relative amount of Lewis and Brønsted acids can be controlled by the amount of trimethylphosphate used in the synthesis. Upon deposition of Pd, the multifunctional material showed enhanced activity for the hydrogenolysis of eugenol and guaiacol compared to Pd on the unmodified ceria support. As a result, this was attributed to the cooperativity between the Lewis acid sites, which activate the substrate for dearomatization, and the redox/Brønsted acid properties, which catalyze hydrogenolysis.

36 MATERIALS SCIENCE↗

Selective nitrogen doping of graphene oxide by laser irradiation for enhanced hydrogen evolution activity

Selective nitrogen-doping of graphene oxide with a high pyridinic N ratio (51%; L-GO) was achieved here by laser irradiation of graphene oxide with ammonia. The resulting L-GO exhibited enhanced electrocatalytic properties; specifically, the overpotential of the hydrogen evolution reaction (HER) was improved by over 400 mV at 10 mA cm -2 compared to the pristine graphene oxide.

36 MATERIALS SCIENCE↗