Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Cycle-to-cycle variability in spark-assisted compression ignition engines near optimal mean combustion phasing

Stoichiometric spark-assisted compression ignition (SACI) combustion with exhaust gas recirculation (EGR) dilution has demonstrated higher part-load thermal efficiencies compared to spark-ignited engines, while maintaining ultra-low tailpipe emissions. However, SACI is often characterized by high cyclic variability in heat release or torque output, which poses a challenge to its implementation in light-duty vehicles. This paper presents an experimental investigation of cyclic variability in stoichiometric SACI combustion under EGR-dilute conditions, while maintaining mean combustion phasing (θ 50 ) near optimal timing for thermal efficiency. The present work focuses on SACI conditions where the flame-based heat release fraction is between approximately 10% and 40% of the overall heat release, and therefore contributes significantly to the combustion process. For the SACI conditions examined, the variability in θ 50 was driven by variability in autoignition timing, which in turn correlated with the start of measurable heat release (θ 02 ). High variability in θ 50 caused unstable work output due to very late combustion with poor or no end-gas autoignition. The use of a high ignition energy dual-coil offset ignition system had negligible impact in reducing θ 50 variability. Analysis of experimental data from close to 1000 operating conditions showed that the magnitude of θ 50 variability correlates with the flame-based heat release fraction ([Formula: see text]), for a large range of intake pressures, spark timings and exhaust gas recirculation levels. For the SACI conditions examined, combustion phasing variability was largely determined by flame-based combustion and particularly the initial flame formation (θ IGN-02 ), and minimally by the end-gas autoignition heat release. The analysis also demonstrated that θ 50 variability is amplified as the contribution of the flame to the overall heat release increases.

Engineering↗

Statistical change detection of building energy consumption: Applications to savings estimation

The surge in interval meter data availability and associated activity in energy data analytics has inspired new interest in advanced methods for building efficiency savings estimation. Statistical and machine learning approaches are being explored to improve the energy baseline models used to measure and verify savings. One outstanding challenge is the ability to identify and account for operational changes that may confound savings estimates. In the measurement and verification (M&V) context, ‘non-routine events’ (NREs) cause changes in building energy use that are not attributable to installed efficiency measures, and not accounted for in the baseline model’s independent variables. In the M&V process NREs must be accounted for as ‘adjustments’ to appropriately attribute the estimated energy savings to the specific efficiency interventions that were implemented. Currently this is a manual and custom process, conducted using professional judgment and engineering expertise. As such it remains a barrier in scaling and standardizing meter-based savings estimation. Here in this work, a data driven methodology was developed to (partially) automate, and therefore streamline the process of detecting NREs in the post-retrofit period and making associated savings adjustments. The proposed NRE detection algorithm is based on a statistical change point detection method and a dissimilarity metric. The dissimilarity metric measures the proximity between the actual time series of the post-retrofit energy consumption and the projected baseline, which is generated using a statistical baseline model. The suggested approach for NRE adjustment involves the NRE detection algorithm, the M&V practitioner, and a regression modeling algorithm. The performance of the detection and adjustment algorithm was evaluated using a simulation-generated test data set, and two benchmark algorithms. Results show a high true positive detection rate (75%-100% across the test cases), higher than ideal false positive detection rates (20%-70%), and low errors in energy adjustment (<0.7%). These results indicate that the algorithm holds for helping M&V practitioners to streamline the process of handling NREs. Moreover, the change point algorithm and underlying statistical principles could prove valuable for other building analytics applications such as anomaly detection and fault diagnostics.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Shifting groundwater fluxes in bedrock fractures: Evidence from stream water radon and water isotopes

Geologic features (e.g., fractures and alluvial fans) can play an important role in the locations and volumes of groundwater discharge and degree of groundwater-surface water (GW-SW) interactions. However, the role of these features in controlling GW-SW dynamics and streamflow generation processes are not well constrained. GW-SW interactions and streamflow generation processes are further complicated by variability in precipitation inputs from summer and fall monsoon rains, as well as declines in snowpack and changing melt dynamics driven by warming temperatures. Using high spatial and temporal resolution radon and water stable isotope sampling and a 1D groundwater flux model, we evaluated how groundwater contributions and GW-SW interactions varied along a stream reach impacted by fractures (fractured-zone) and below the fractured hillslope (non-fractured zone) in Coal Creek, a Colorado River headwater stream affected by summer monsoons. During early summer, groundwater contributions from the fractured zone dominated, but declined throughout the summer. Groundwater contributions from the non-fractured zone were constant throughout the summer and became proportionally more important later in the summer. We hypothesize that groundwater in the non-fractured zone is dominantly sourced from a high-storage alluvial fan at the base of a tributary that is connected to Coal Creek throughout the summer and provides consistent groundwater influx. Water isotope data revealed that Coal Creek responds quickly to incoming precipitation early in the summer, and summer precipitation becomes more important for streamflow generation later in the summer. We quantified the change in catchment dynamic storage and found it negatively related to stream water isotope values, and positively related to modeled groundwater discharge and the ratio of fractured zone to non-fractured zone groundwater. Importantly, we interpret these relationships as declining hydrologic connectivity throughout the summer leading to late summer streamflow supported predominantly by shallow flow paths, with variable response to drying from geologic features based on their storage. As groundwater becomes more important for sustaining summer flows, quantifying local geologic controls on groundwater inputs and their response to variable moisture conditions may become critical for accurate predictions of streamflow.

54 ENVIRONMENTAL SCIENCES↗

Experimental platform for the investigation of magnetized-reverse-shock dynamics in the context of POLAR

The influence of a strong external magnetic field on the collimation of a high Mach number plasma flow and its collision with a solid obstacle is investigated experimentally and numerically. The laser irradiation ( $I\sim 2\times 10^{14}~\text{W}\cdot \text{cm}^{-2}$ ) of a multilayer target generates a shock wave that produces a rear side plasma expanding flow. Immersed in a homogeneous 10 T external magnetic field, this plasma flow propagates in vacuum and impacts an obstacle located a few mm from the main target. A reverse shock is then formed with typical velocities of the order of 15–20 $\pm$ 5 km/s. The experimental results are compared with 2D radiative magnetohydrodynamic simulations using the FLASH code. This platform allows investigating the dynamics of reverse shock, mimicking the processes occurring in a cataclysmic variable of polar type.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Benders Decomposition Using Graph Modeling and Multi-Parametric Programming

Benders decomposition is a widely used method for solving large and structured optimization problems, but its performance is affected by the repeated solution of subproblems. We propose a flexible and modular algorithmic framework for accelerating Benders decomposition. Specifically, we express the problem structure by using a graph-theoretic modeling abstraction in which nodes represent optimization subproblems and edges represent connectivity between subproblems. A key innovation of our approach is that we embed multiparametric programming (mp) surrogates for node subproblems, which maps the exact analytical map of the subproblem solution space. The use of mp surrogates allows us to replace subproblem solves with fast look-ups and function evaluations for primal and dual variables during the iterative Benders process. We formally show the equivalence between classical Benders cuts and those derived from the mp solution. We implement our framework in the open-source PlasmoBenders.jl software package. To demonstrate the capabilities of the proposed framework, we apply it to a two-stage stochastic programming problem, which aims to make optimal capacity expansion decisions under market uncertainty. We evaluate both single-cut and multicut variants of Benders decomposition and show that the use of mp surrogates achieves substantial speedups in subproblem solve time, while preserving the convergence guarantees of Benders decomposition. We highlight advantages in solution analysis and interpretability that is enabled by mp critical region tracking; specifically, we show that these reveal how decisions evolve geometrically across the Benders search. Our results aim to demonstrate that combining surrogate modeling with graph modeling offers a promising and extensible foundation for structure-exploiting decomposition. In addition, by decomposing the problem into more tractable subproblems, the proposed approach also aims to overcome scalability issues of mp. Finally, the use of mp surrogates provides a unifying and modular optimization framework that enables the representation of heterogeneous node subproblems as modeling objects with a homogeneous structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Translocation in Mutants of the Anthrax Channel: Atomically Detailed Simulations with Milestoning

Anthrax toxin consists of a cation channel and two protein factors. Translocation of the anthrax protein factors from endosomal to the cytosolic compartment is a complex process which utilizes the cation channel. An atomically detailed understanding of the function of the anthrax translocation machinery is incomplete. We introduce atomically detailed simulations of the lethal factor and channel mutants. Kinetic and thermodynamic properties of early events in the translocation process are computed within the Milestoning theory and algorithm. Several mutants of the channel illustrate that long-range electrostatic interactions provide the dominant driving force for translocation. No external energy input is needed because the lower pH in the endosome relative to the cytosol drives the initial translocation process forward. Channel mutants with variable sizes cause smaller effects on translocation events relative to charge manipulations. Comparison with available experimental data is provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of Extra-Large Chromophore Supramolecular Polymers for Enhanced Hydrogen Production

The control of morphology in bioinspired chromophore assemblies is key to the rational design of functional materials for light harvesting. Here, we investigate here morphological changes in perylene monoimide chromophore assemblies during thermal annealing in aqueous environments of high ionic strength to screen electrostatic repulsion. We found that annealing under these conditions leads to the growth of extra-large ribbon-shaped crystalline supramolecular polymers of widths from about 100 nm to several micrometers and lengths from 1 to 10 μm while still maintaining a unimolecular thickness. This growth process was monitored by variable-temperature absorbance spectroscopy, synchrotron X-ray scattering, and confocal microscopy. The extra-large single-crystal-like supramolecular polymers are highly porogenic, thus creating loosely packed hydrogel scaffolds that showed greatly enhanced photocatalytic hydrogen production with turnover numbers as high as 13 500 over ~110 h compared to 7500 when smaller polymers are used. Our results indicate great functional opportunities in thermally and pathway-controlled supramolecular polymerization.

36 MATERIALS SCIENCE↗

Reconstruction of the South Atlantic Subtropical Dipole index for the past 12,000 years from surface temperature proxy

Climate indices based on sea surface temperature (SST) can synthesize information related to physical processes that describe change and variability in continental precipitation from floods to droughts. The South Atlantic Subtropical Dipole index (SASD) is based on the distribution of SST in the South Atlantic and fits these criteria. It represents the dominant mode of variability of SST in the South Atlantic, which is modulated by changes in the position and intensity of the South Atlantic Subtropical High. Here we reconstructed an index of the South Atlantic Ocean SST (SASD-like) for the past twelve thousand years (the Holocene period) based on proxy-data. This has great scientific implications and important socio-economic ramifications because of its ability to infer variability of precipitation and moisture over South America where past climate data is limited. For the first time a reconstructed index based on proxy data on opposite sides of the SASD-like mode is able to capture, in the South Atlantic, the significant cold events in the Northern Hemisphere at 12.9–11.6 kyr BP and 8.6–8.0 ky BP. These events are related, using a transient model simulation, to precipitation changes over South America.

54 ENVIRONMENTAL SCIENCES↗

Evaluating the Accuracy and Precision of Multiple Abundance Estimators Using State-Space Models: A Case Study for a Threatened Population of Chinook Salmon in Johnson Creek, Idaho

Abstract Over the last century, Chinook Salmon Oncorhynchus tshawytscha populations in the Pacific Northwest have experienced dramatic declines, leading to many of them being listed as threatened under the Endangered Species Act. The abundance of these threatened populations relative to the thresholds for delisting remains the primary metric for assessing recovery, yet determining the true population abundances from multiple survey types with unknown levels of accuracy and precision remains difficult. The abundance of the spring–summer Chinook Salmon population in Johnson Creek, Idaho, has been measured using a mark–recapture survey and three different redd count surveys (RCSs) that vary temporally and spatially. Using a state-space model, we determined the accuracy and precision of each survey type by decoupling the observation error of the survey from the process error describing the annual variability in the true population abundance. We then extended the results of the model to determine the risk of managers’ incorrectly delisting the population (a type I error) or incorrectly keeping it listed (a type II error). Finally, we show that salmon managers with data-limited populations (primarily those with only single-pass index RCSs) might use the results of our risk analysis to determine whether expanding survey efforts to minimize management risks is appropriate when they are confronted with dwindling financial resources. For example, we determined that although both the multiple-pass extended RCS (CV = 0.06) and mark–recapture surveys (CV = 0.14) provide unbiased estimates of salmon abundance in Johnson Creek, the mark–recapture study can have annual costs that are 30–100 times greater. Managers may determine that directing research funds toward acquiring information unique to weir-based mark–recapture surveys (i.e., migration timing, good genetics samples, etc.) may not be justified for all populations. Received October 7, 2013; accepted March 5, 2014

Chasco, Brandon E.↗

RESISTIVITY-DRIVEN STATE CHANGES IN VERTICALLY STRATIFIED ACCRETION DISKS

We investigate the effect of shear viscosity, {nu}, and Ohmic resistivity, {eta}, on the magnetorotational instability (MRI) in vertically stratified accretion disks through a series of local simulations with the Athena code. First, we use a series of unstratified simulations to calibrate physical dissipation as a function of resolution and background field strength; the effect of the magnetic Prandtl number, P{sub m} = {nu}/{eta}, on the turbulence is captured by {approx}32 grid zones per disk scale height, H. In agreement with previous results, our stratified disk calculations are characterized by a subthermal, predominately toroidal magnetic field that produces MRI-driven turbulence for |z| {approx}< 2H. Above |z| {approx} 2H, the magnetic pressure dominates and the field is buoyantly unstable. Large-scale radial and toroidal fields are also generated near the mid-plane and subsequently rise through the disk. The polarity of this mean field switches on a roughly 10 orbit period in a process that is well modeled by an {alpha}-{Omega} dynamo. Turbulent stress increases with P{sub m} but with a shallower dependence compared to unstratified simulations. For sufficiently large resistivity, {eta} {approx} c{sub s} H/1000, where c{sub s} is the sound speed, MRI turbulence within 2H of the mid-plane undergoes periods of resistive decay followed by regrowth. This regrowth is caused by amplification of the toroidal field via the dynamo. This process results in large amplitude variability in the stress on 10-100 orbital timescales, which may have relevance for partially ionized disks that are observed to have high- and low-accretion states.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimal waveform estimation for classical and quantum systems via time-symmetric smoothing. II. Applications to atomic magnetometry and Hardy's paradox

The time-symmetric quantum smoothing theory [Tsang, Phys. Rev. Lett. 102, 250403 (2009); Phys. Rev. A 80, 033840 (2009)] is extended to account for discrete jumps in the classical random process to be estimated, discrete variables in the quantum system, such as spin, angular momentum, and photon number, and Poisson measurements, such as photon counting. The extended theory is used to model atomic magnetometers and study Hardy's paradox in phase space.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Clock ambiguity and the emergence of physical laws

The process of identifying a time variable in time-reparameterization invariant theories results in great ambiguities about the actual laws of physics described by a given theory. A theory set up to describe one set of physical laws can equally well be interpreted as describing any other laws of physics by making a different choice of time variable or clock. In this article we demonstrate how this 'clock ambiguity' arises and then discuss how one might still hope to extract specific predictions about the laws of physics even when the clock ambiguity is present. We argue that a requirement of quasiseparability should play a critical role in such an analysis. As a step in this direction, we compare the Hamiltonian of a local quantum field theory with a completely random Hamiltonian. We find that any random Hamiltonian (constructed in a sufficiently large space) can yield a 'good enough' approximation to a local field theory. Based on this result we argue that theories that suffer from the clock ambiguity may in the end provide a viable fundamental framework for physics in which locality can be seen as a strongly favored (or predicted) emergent behavior. We also speculate on how other key aspects of known physics such as gauge symmetries and Poincare invariance might be predicted to emerge in this framework.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Inflation from supersymmetric quantum cosmology

We derive a special scalar field potential using the anisotropic Bianchi type I cosmological model from canonical quantum cosmology under determined conditions in the evolution to anisotropic variables {beta}{sub {+-}}. In the process, we obtain a family of potentials that has been introduced by hand in the literature to explain cosmological data. Considering supersymmetric quantum cosmology, this family is scanned, fixing the exponential potential as more viable in the inflation scenario V({phi})=V{sub 0}e{sup -{radical}(3){phi}}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Single Shot Characterization of High Transformer Ratio Wakefields in Nonlinear Plasma Acceleration

We report that plasma wakefields can enable very high accelerating gradients for frontier high energy particle accelerators, in excess of 10 GeV/m. To overcome limits on single stage acceleration, specially shaped drive beams can be used in both linear and nonlinear plasma wakefield accelerators (PWFA), to increase the transformer ratio, implying that the drive beam deceleration is minimized relative to acceleration obtained in the wake. In this Letter, we report the results of a nonlinear PWFA, high transformer ratio experiment using high-charge, longitudinally asymmetric drive beams in a plasma cell. An emittance exchange process is used to generate variable drive current profiles, in conjunction with a long (multiple plasma wavelength) witness beam. The witness beam is energy modulated by the wakefield, yielding a response that contains detailed spectral information in a single-shot measurement. Using these methods, we generate a variety of beam profiles and characterize the wakefields, directly observing transformer ratios up to R=7.8. Lastly, a spectrally based reconstruction technique, validated by 3D particle-in-cell simulations, is introduced to obtain the drive beam current profile from the decelerating wake data.

43 PARTICLE ACCELERATORS↗

Scaling features of charged-hadron spectra in AA collisions at RHIC in z presentation

Results of analysis of experimental data on inclusive spectra of charged hadrons produced in heavy-ion collisions at RHIC are shown in z presentation. The data indicate similarity as a characteristic feature of mechanism of hadron production at high energies. It is argued that this property includes structure of the colliding objects, interaction of their constituents, and character of the fragmentation process. Relation of the scaling variable z with the entropy and 'specific heat' of the interacting system is discussed. A microscopic scenario of the constituent interactions connected with the momentum distribution of hadrons in the final state is suggested. We estimate energy losses of particles in the produced matter characterized by the multiplicity density dN{sub ch}/d{eta}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Surface-to-Interior Transport Timescales and Ventilation Patterns in a Time-Dependent Circulation Driven by Sustained Climate Warming

Abstract The effect of climate warming in response to rising atmospheric CO 2 on the ventilation of the ocean remains uncertain. Here we make theoretical advances in elucidating the relationship between ideal age and transit time distribution (TTD) in a time-dependent flow. Subsequently, we develop an offline tracer-transport model to characterize the ventilation patterns and time scales in the time-evolving circulation for the 1850–2300 period as simulated with the Community Earth System Model version 1 (CESMv1) under a business-as-usual warming scenario. We found that by 2300 2.1% less water originates from the high-latitude deep water formation regions (both hemispheres) compared to 1850. In compensation, there is an increase in the water originating from the subantarctic. We also found that slowing meridional overturning circulation causes a gradual increase in mean age during the 1850–2300 period, with a globally averaged mean-age increase of ∼110 years in 2300. Where and when the water will be re-exposed to the atmosphere depends on the post-2300 circulation. For example, if we assume that the circulation persists in its year-2300 state (scenario 1), the mean interior-to-surface transit time in year 1850 is ∼1140 years. In contrast, if we assume that the circulation abruptly recovers to its year-1850 state (scenario 2), the mean interior-to-surface transit time in 1850 is only ∼740 years. By 2300, these differences become even larger; in scenario 1, the mean interior-to-surface transit time increases by ∼200 years, whereas scenario 2 decreases by ∼80 years. The dependence of interior-to-surface transit time on the future ocean circulation produces an additional unavoidable uncertainty in the long-term durability of marine carbon dioxide removal strategies. Significance Statement The ocean’s circulation, when altered by climate warming, can affect its capacity to absorb heat and CO 2 , which are crucial for the global climate. In our study, we investigated how global warming, caused by rising CO 2 levels, might impact the ocean circulation—the way water moves from deep ocean to the surface and vice versa. We discovered that by 2300, if we continue on our current warming trajectory, the origins of water within the ocean will shift, with less coming from deep, cold zones near the poles and more from subantarctic regions. As a result, deep water will take longer time before it resurfaces than shallow water. How quickly this water travels from deep regions to the surface could change, depending on the state of future ocean circulation. If the circulation remains as predicted in 2300, this journey will take longer. Conversely, if it reverts to the pattern in 1850, the process will be quicker. This variability introduces added uncertainty to strategies aimed at mitigating climate change by storing CO 2 in the ocean. Our work highlights the intricate ways in which climate change can influence our oceans, potentially affecting our plans to mitigate global warming.

54 ENVIRONMENTAL SCIENCES↗

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables, running time-domain simulations, and performing sensitivity analyses to determine their impact on power output. The workflow, designed for the PIP device, is generalized and can be extended to optimize other WECs that can be simulated in WEC-Sim. This work establishes a foundation for future time-domain-based WEC design optimizations. Included in this submission are all figures from the final report and the model inputs required to generate them. This includes Python scripts with inputs that produce the meshes, boundary element method (BEM) models, hydrodynamic coefficients, and the WEC-Sim models used for time-domain analyses. Although data for every single run is not included to save space, all of it can be reproduced using the provided models. Detailed instructions for setting up the environment and running the codes are also included.

16 TIDAL AND WAVE POWER↗

Chapter 2: Thermal Energy Storage for Energy Decarbonization

Thermal energy storage (TES) deployed with concentrating solar power (CSP) has shown value and capabilities in generating dispatchable power. It has attracted significant interest for potential roles in energy storage for various capacities and applications. Energy storage plays an important role in expanding renewable generation and is becoming indispensable in future carbon-free electric power. TES development and deployment provide various possibilities for electric storage and have shown advantages in capacity and flexibility to support renewable integration. In addition, renewable energy integrated with a low-cost TES system can potentially provide a reliable thermal energy supply to displace fossil fuels for broad decarbonization. Varieties of TES technologies and developments breed new areas of growth in TES materials, designs, components, and system configurations, which provide opportunities for substantial cost reduction and performance improvements to meet the technoeconomic challenges in practical applications. This chapter will describe recent progress in thermal energy storage research and development and primarily focus on sensible heat storage and its applications in supplying reliable electricity and industry process heat by integrating with variable renewable energy.

concentrating solar thermal power↗