Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROFITS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Genomic dissection of anthracnose resistance response in sorghum [Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

59 BASIC BIOLOGICAL SCIENCES↗

2018 Community Commitment Plan Report [Poster]

Addressing the Greatest Challenges in Our Communities: Sandia National Laboratories (Sandia) is committed to being an informed, compassionate and contributing neighbor in our local communities. This commitment has been demonstrated throughout Sandia's history and is an enduring part of our future. New Mexico faces many challenges, including the highest childhood poverty rate in the United States. According to a recent community perception survey, the biggest issue facing Albuquerque is crime, followed by unemployment, and concerns that the educational system is poor. Lack of affordable housing and insufficient educational achievement are issues in the Bay Area near our Livermore site. In 2018, National Technology and Engineering Solutions of Sandia contributed $1.4M to non-profits and organizations that provide critical resources and services to address the greatest challenges in Sandia's communities.

99 GENERAL AND MISCELLANEOUS↗

Genomic dissection of anthracnose resistance response in sorghum [ Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

09 BIOMASS FUELS↗

Production of high oil, transgene free Camelina sativa plants through genome editing

The objective of this project was to develop a Camelina sativa feedstock with significantly increased seed yield and oil content to maximize oil yields per acre. Camelina is an oilseed crop with high potential as a bioenergy feedstock due to its high oil content, low inputs for cultivation, frost tolerance, and short growth cycle (80-110 days). To accelerate market entry, a next generation technology was used to develop GMO free plants to provide an expedited path through regulatory approval. This is anticipated to significantly decrease the time and thus the costs of commercialization of these lines. For this program current Camelina lines were considered to yield, on average, 1500 lbs of seed per acre and possess a seed oil content of 40%. The program had two oil production benchmarks: (1) increase production of seed to 2500 lbs/acre with seed containing 45% oil, and (2) increase production of seed to 3500 lbs/acre with seed containing 60% oil. Hitting the first benchmark would significantly expand the potential of Camelina as a crop and would provide the profitability necessary to incent farmers to grow Camelina, resulting in the production of renewable feedstock for the biobased energy and chemical industries. The second benchmark (3500 lbs seed/acre with 60% oil content) would have a huge impact on the availability of renewable Camelina oil for the biodiesel and aviation fuel markets. The accomplishments of this program demonstrated that genome editing of multiple targets in Camelina is technically feasible, despite the complexity of the Camelina genome. It also demonstrated that it is possible to increase seed yield while maintaining seed oil content using genome editing. Genome edited lines achieving up to a 40% increase in seed yield were demonstrated in greenhouse growth studies. In separate experiments, the program also achieved increases of up to 38% in the seed oil content of individual seeds. This increased seed oil content was, however, often accompanied by a decrease in seed yield. These observations demonstrate that carbon flow in Camelina can be significantly shifted to seed oil production but that additional research is necessary to concurrently increase/or maintain seed yield. Yield10 plans to continue to build on these results after the BETO program. During the course of this program, Yield10 also demonstrated that lines with single edits, as well as lines with multiple edits, generated using genome editing technology can be designated as non-regulated by USDA-APHIS through their “Am I Regulated?” process. Two separate “Am I Regulated?” letters were submitted to USDA-APHIS and edited Camelina lines described in the letters were deemed non-regulated by the agency demonstrating a reduced regulatory path. The technology developed in this program contributes to the overall understanding of seed oil biosynthesis in oilseed crops and how seed yield and seed oil content can be improved using genome editing techniques. The technology is thus also relevant to increasing seed and oil yield in related oilseed crops, such as canola.

09 BIOMASS FUELS↗

Improved Preparedness in Galveston County, Texas Final Report CRADA No. TC02275

LLNS, as manager and operator of Lawrence Livermore National Laboratory (LLNL), and UTMB have a multi-year, ongoing, collaborative effort. This effort aimed to improve preparedness in Galveston County, Texas region and, more generally, identifying improved methods to (a) understand and mitigate the hazards of a large industrial chemical release and (b) implement and adapt national response plans and guidance to meet local planning and response needs. This CRADA was one portion of that effort and was intended to support the Hydrofluoric Acid (HF) Incident Symposium. This annual symposium engages a wide variety of government, private, and non-profit groups to (a) increase the resiliency, and reduce the vulnerability, of communities at risk of being impacted by major releases of toxic industrial chemicals and (b) guide the development of policies and best practices to prevent and manage these events. This CRADA project was originally scheduled for six (6) months and consisted of five major tasks.

54 ENVIRONMENTAL SCIENCES↗

Innovative Gasification to Produce Fischer-Tropsch Jet and Diesel Fuel

The primary objective of this project and the U.S. DOE’s integrated biorefinery (“IBR”) program was to demonstrate conversion of biomass and waste-derived feedstocks into military spec liquid fuels. Frontline’s proposed integrated process was to incorporate several novel technologies and innovative applications of existing technologies that would serve both to increase plant efficiency and also to lower the cost of the produced biofuels. The project was intended to demonstrate Frontline Bioenergy’s technologies for gasification and synthesis gas clean-up configuration to produce a syngas stream suitable for a proven Fischer-Tropsch (“F-T”) unit that would produce F-T intermediate products. These F-T intermediate products were to be upgraded to military spec diesel and jet fuel, including F76, JP5, and JP8. Specifically, these technologies consisted of: 1. Frontline’s PMFreeGas® ultra low particulate matter (PM) hot gas filtration technology 2. Application of Frontline’s TarFreeGas® ultra low-tar gasification technology 3. Frontline’s novel approach to syngas conditioning The proposed gasifier system was to operate at 10 tpd capacity while the F-T plant was capable of approximately one barrel per day. Although the gasifier output would have been roughly ten times the F-T plant’s required input, the 10 tpd capacity was chosen to enable scaling to commercial capacity. Project partners included i) SGC Energia, owner of the F-T technology and owner of the proposed demonstration site in Pasadena, Texas; ii) Stanley Consultants, a reputable engineering company that provided detailed electrical engineering services; and iii) Delphi Engineering & Construction LLC, a consulting company that provided project management advisory services. The integrated plant was never constructed due to lack of cost share funds. However, the commercialization plan and associated financial model suggested such a plant could be economically viable when the price of oil exceeds $70 per barrel. The price of feedstock plays a significant role in the profitability of the plant for a given value of oil. An integrated biorefinery capable of producing liquid transportation fuels and other chemical feedstocks would benefit the public by providing a sustainable pathway to convert domestically available feedstocks into fuels that might otherwise be imported from countries or regions of the world that are typically hostile to the United States.

09 BIOMASS FUELS↗

Extreme Temperature Sample Environment for Materials Research Using Neutron Scattering

Extreme temperatures and non-equilibrium materials are both central to Department of Energy’s (DOE) mission of addressing grand challenges in emerging energy and advanced materials technologies. The goal of this project is to develop and perfect a system for studying materials in extreme and non-equilibrium conditions using neutron scattering. Neutron scattering has many advantages in the study of materials structure including the ability to use isotopic substitution to determine partial structure factors. When used at a pulsed neutron source, the potential for event-based detection can enable a stroboscopic technique to interrogate very short lived metastable states in supercooled liquids. The work performed in this Phase I project included: (i) literature reviews and discussions with beamline scientists to establish key requirements for the instrument, (ii) laboratory-based research at Materials Development, Inc. (MDI) to test design concepts, modify control software and model designs, (iii) feasibility experiments and measurements on a prototype sample at the Spallation Neutron Source, and (iv) analysis of the results and design of the proposed Phase II instrument. The results of the work show that the proposed approach is viable and provides a strong basis for the Phase II instrument design and Phase III commercialization. MDI participated in the DOE Commercialization Assistance Program with the Larta Institute (Larta) to accelerate commercial sales of the instruments. The market research identified a served available market of ~13M including sales to beamlines, university research laboratories, and industrial glass and materials businesses. Over the ca. 10 year product life cycle, MDI expects to sell instruments with a cumulative net present value profit of approximately 5M.

47 OTHER INSTRUMENTATION↗

Weusemath.org Career Profile

National labs serve a role between academia and industry, solving problems too large and too applied for academia, and insufficiently profit-driven to be tackled by industry.

97 MATHEMATICS AND COMPUTING↗

Thermomechanical Design Optimization of Roll-to-Roll Manufactured Hybrid Metal Polymer Heat Exchanger

Metal based heat exchangers for ultra-low temperature (<100C) waste heat recovery (WHR) face high maintenance and material costs that surpass profits from recovery[1]. Low-cost polymer pipes suffer from poor thermal conductivity (~0.2 W/mK), and thus a low overall heat transfer coefficient. Thermal conductivity of polymers can be enhanced through systematic molecular alignment by stretching[2], chemical vapor deposition of extended polymers [3], surface grating [4], etc. However, these approaches suffer from scalability issues for WHR heat exchangers in terms of cost [3], and thermomechanical considerations [5]. In this work, we propose novel hybrid metal-polymer strips that are strategically designed to enhance thermal conductivity by cladding copper around polymer strips. The polymer strips with copper-clad edges are wound helically to form the pipes for a heat exchanger. Through finite element simulations, we optimize the design for enhanced thermal performance of the polymer-metal strips. We predict up to 20 % enhancement in overall heat transfer from a base polymer with a thermal conductivity of 0.2 W/mK. We show that the thermomechanical strains induced in the pipes can be reduced to < 0.2 % by strategically stacking and welding multiple polymer-metal strips. We verified the improved thermal performance of the roll-to-roll manufactured strips through a thermal conductivity measurement setup. The optimized design of hybrid metal-polymer pipes provides a scalable and cost-effective means for harvesting waste heat from ultra-low temperature sources. Thekdi, Arvind, and Sachin U. Nimbalkar. Oak Ridge National Lab, 2015 Shen, Sheng, et al. Nature nanotechnology 5.4 (2010): 251. Xu, Yanfei, et al. Science advances 4.3 (2018): 3031. Smith, M. K., Singh, V., Kalaitzidou, K., & Cola, B. A. (2015). ACS nano, 9(2), 1080-1088. Aymonier, C., Bortzmeyer, D., Thomann, R., & Mülhaupt, R. (2003). Chemistry of Materials, 15(25), 4874-4878.

C Rajagopal, Manjunath↗

Thermomechanical design optimization for low metal footprint in hybrid metal-polymer heat exchanger

Material and maintenance costs of metal-based heat exchangers surpass profits in waste heat recovery (WHR) from ultra-low temperature (<100C) sources [1]. A low-cost alternative like polymer pipes suffer from poor thermal conductivity (~0.2 W/mK), and a low overall heat transfer coefficient. Polymers’ thermal conductivity have previously been enhanced through systematic molecular alignment by stretching [2], chemical vapor deposition of extended polymers [3], surface grating [4], etc. However, these approaches suffer from scalability issues for WHR heat exchangers in terms of cost [3], and thermomechanical considerations [5]. In this work, we propose novel hybrid metal-polymer heat exchangers that are made from polymer-copper strips. Through finite element method (FEM) simulations, we first optimize the placement of copper around polymer strips to enhance the transverse thermal conductivity of the strips. The copper cladded polymer strips are wound helically in a roll-to-roll system to form the pipes for a heat exchanger. We then optimize the design of helically wound pipes to reduce thermomechanical strains to < 0.2 % at 100C and 40 psi working conditions. At 25 % volume fraction of copper in the pipe, we predict up to 20 % enhancement in overall heat transfer from a base polymer with a thermal conductivity of 0.2 W/mK. We also compare and contrast the thermomechanical performance of the optimized metal-polymer strips to random metal matrix composites. Finally, we experimentally verify the thermal conductivity of the optimized strips through bulk thermal conductivity and thermal interface resistance measurement setup. By systematically improving the design through FEM and experimental measurements, we provide an optimized design of hybrid metal-polymer pipes that provides a low metal footprint and cost-effective means for harvesting waste heat from ultra-low temperature sources. Thekdi, Arvind, and Sachin U. Nimbalkar. Oak Ridge National Lab, 2015 Shen, Sheng, et al. Nature nanotechnology 5.4 (2010): 251. Xu, Yanfei, et al. Science advances 4.3 (2018): 3031. Smith, M. K., Singh, V., Kalaitzidou, K., & Cola, B. A. (2015). ACS nano, 9(2), 1080-1088. Aymonier, C., Bortzmeyer, D., Thomann, R., & M&uuml;lhaupt, R. (2003). Chemistry of Materials, 15(25), 4874-4878.

C Rajagopal, Manjunath↗

Frontiers in the Economics of Widespread, Long-Duration Power Interruptions: Proceedings from an Expert Workshop

The costs to electric utility customers from short-term, limited geographic-scale power disruptions have been studied for many years. However, there is increasing interest among regulators, policy-makers, and utilities in developing and implementing methods for analyzing interruptions that are of longer duration (days, weeks, or longer) and of a larger geographic scope (entire metropolitan areas or regions which may extend across multiple service territories). A 2017 report from the U.S. National Academies of Sciences, Engineering, and Medicine indicated the importance of “develop[ing] comprehensive studies to assess the value to customers of improved reliability and resilience…during large-area, long-duration blackouts.” As a contribution toward fulfilling this recommendation, the U.S. Department of Energy’s (DOE) Office of Electricity’s Transmission Permitting and Technical Assistance Division, in partnership with Lawrence Berkeley National Laboratory (LBNL), convened a workshop to identify research needs and discuss potential avenues for methodological advances in the economics of widespread, long-duration power interruptions. The workshop was organized around six key themes in the economics of widespread, long-duration interruptions. LBNL conducted a competitive solicitation for white papers on these themes, and the authors selected were leading experts in academia, industry, and the non-profit sector. They were tasked with assessing the state of knowledge on particular topics, and identifying research needs and promising directions to expand it. These topics included definitions of resilience and reliability; regional economic modeling approaches; uncertainty quantification; data challenges and opportunities; contingent valuation survey techniques; and reduced-form analytical tools for assessing the impacts of power interruptions of this scale. The authors of the six white papers presented their findings at the workshop, titled “Frontiers in the Economics of Widespread, Long-Duration Power Interruptions,” and held in Washington, D.C., on March 6, 2018. Each paper was the subject of its own session, with the presentations followed by comments by assigned discussants, and in turn a general discussion of the papers, their findings, and the issues they raised. In addition to the authors, discussants, and LBNL and DOE staff, the workshop participants comprised government, industry, and academic thought leaders from across the country.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Vacuum Sanitation Energy Efficiency Retrofits Project

The Alaska Native Tribal Health Consortium (ANTHC) is a non-profit Tribal health organization designed to meet the unique health needs of Alaska Native and American Indian people living in Alaska. In partnership with communities and health organizations across the state, ANTHC provides health services to over 175,000 Alaska Native and American Indian people. Part of ANTHC’s mission includes ensuring that Native Alaskan communities have access to clean and safe water and sewer services. ANTHC works with communities to provide safe drinking water and healthy wastewater services that directly supports the health of Alaska Native people. To ensure water and sewer facilities operate sustainably, ANTHC Alaska Rural Utility Collaborative (ARUC) and Tribal Utility Support (TUS) programs provide operations and maintenance services on rural sanitation facilities. A key component of many water and sanitation systems in rural Alaskan villages is the vacuum sewer system, which is typically installed in places where the topography is primarily flat, and the elevation differential is not enough for a gravity powered sewer system to function without freezing during the winter. The vacuum sewer system is also the most costly and energy intensive form of sewer system, due to many factors including: large horsepower vacuum pumps needed for operation, potential for frequent vacuum leaks which increase the pump’s run-times, manpower needed to maintain pipe grade throughout the system, and the amount of heat needed to be added to the above ground pipes to keep them from freezing. The Vacuum Sanitation Energy Efficiency Retrofits Project implemented strategies to reduce the operating costs for vacuum sewer systems located in the remote Alaskan communities of Alakanuk, Kotlik, and Noorvik. A variety of deep energy efficiency retrofits were installed to reduce the amount of diesel fuel and electricity required to operate these systems which use large amounts of energy to pump, heat, and collect sewage from the community.

20 FOSSIL-FUELED POWER PLANTS↗

Accelerate Performance (Final Technical Report)

Encouraging commercial building owners to set measurable energy goals before design begins can drive design and contractor teams to develop innovative energy efficiency solutions within conventional building budgets. A federal building owner piloted this technique and created a large-scale zero-energy office building on a budget comparable to local market construction rates. The successes and lessons learned from this performance-based project formed the basis of Accelerate Performance, an expanded program using utilities as the primary outreach channel to replicate the approach. Four utilities partnered with Slipstream, a not-for-profit program implementer, to develop pilot incentive offerings to focus building owners on the whole building rather than on individual building components and systems. The original performance-based procurement process and its successful implementation in a federal building project informed all these efforts. The experiences and lessons learned in different new construction markets led to further process adaptations as well as the development of templates and tools to streamline outreach and technical support efforts. The approach can be adapted to utility new construction programs and is a powerful tool for engaging many building owners early in the project planning process as they make critical energy decisions that impact the performance of the building. The approach has led to real energy savings in building projects by encouraging cost-effective, low-risk, and creative design solutions. The performance-based approach was tested in a variety of applications including different building types and owner types, with many owners adopting performance-based procurement techniques, some with variations, but all maintaining the same core principles. Over the course of the project, nearly 100 building projects were impacted and additional projects will continue to be supported through ongoing program offerings with three leading utilities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Daily Market Analysis Capability and Results

Nuclear energy plays an important role in the U.S. energy mix that will likely need to be maintained or strengthened to achieve significant greenhouse gas reduction. However, maintaining the nuclear portfolio becomes increasingly challenging in the current U.S. energy market since the low price of natural gas and the penetration of subsidized and low-marginal cost variable renewable electricity (VRE) are affecting the profitability of nuclear units. In this context, building new nuclear power plants will require increased competitiveness with reduced capital and O&M costs and increased revenues enabled by changes in market policies or increased flexible operation. Within the U.S. Department of Energy, Office of Nuclear Energy, the System Analysis and Integration Campaign has been acquiring the capability to model energy market economics in order to assist decision makers and nuclear utilities. The methods developed and codes acquired are displayed in Figure 1. The objective of this report is to describe the tools acquired for market analysis, and to illustrate their capabilities and complementarities with an example of analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Los Alamos County Battery Energy Storage System Use Review

The purpose of this study is to identify potential alternative uses for the LAC-owned BESS. One critical fact that must be considered in evaluating any profitable use of the BESS is the standby cost associated with keeping the NaS battery on-line, as it must be kept at 300 degrees Celsius at all times, regardless of whether it is being used or not. Standby for the NaS battery online requires approximately 80 MWh/month, costing approximately 28,000 dollars annually. Other relevant costs include a 22,000 dollar annual maintenance contract required for the NaS, and accounting for any losses due to inefficiencies during the operation of the battery. County operations personnel respond to all alarms and visit the BESS on a monthly basis to walk down the site. It estimated this cost approximately 10,000 dollars per year. The total cost of maintaining and keeping the NaS battery on-line for a year, then, is roughly 60,000 dollars.

25 ENERGY STORAGE↗

Mid Atlantic CHP Technical Assistance Partnership (Final Technical Report)

The Mid Atlantic CHP Technical Assistance Partnership (MACHPTAP), managed by The Pennsylvania State University College of Engineering, served the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The objective of the Combined Heat and Power Technical Assistance Partnerships (CHP TAPs) was to provide essential support to continue the market development of CHP’s suite of technologies to further the installation of highly efficient and cost effective CHP. The MACHPTAP’s work included education and outreach as well as technical assistance to a variety of stakeholders including end-users (commercial, industrial, institutional and more), state decision makers, electric and gas utilities, trade associations and non-profit organizations. This assistance included evaluating the economic, energy, reliability and environmental value of proposed systems. The CHP TAPs represented multi-state regions and are the CHP experts in the region who provide fact-based, un-biased information on CHP, including technologies, project development, project financing, local electric and natural gas utility interfaces, and related State best practice policies. Specifically, the MACHPTAP objectives were accomplished through taskings in four specific areas: Technical Assistance to end Users which involved engaging potential end-users to identify, evaluate, and technically support prospective CHP projects; Engagement and Education of End Users where the MACHPTAP engaged and educated end users about CHP, its benefits, and DOE resources available, and strategically hosted or participated in webinars, workshops and conferences; Policymaker Education where the MACHPTAP hosted or participated in webinars, one-on-one meetings, workshops, and other forums; and Program Administration, Management and Reporting, which included monthly and quarterly reporting, program meetings and coordination of activities with other regional TAPs. Accomplishments in the four specific project areas included providing direct Technical Assistance to 289 prospective CHP end users, conducting or participating in 82 End User Education events and hosting or participating in 73 Policy Maker Education events. During the contract period, 107 CHP installations were commissioned in the Mid Atlantic region, with a total generation capacity of over 160 megawatts, with an additional 34 sites with a capacity of over 100 megawatts currently in the planning/design/construction phase. Programmatically, all monthly metrics reports and quarterly reports were submitted in a timely manner.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Development of Integrated Biomimetic Framework with Intelligent Monitoring, Cognition and Decision Capabilities for Control of Advanced Energy Plants

The objective of the project entitled “Development of Integrated Biomimetic Framework with Intelligent Monitoring, Cognition, and Decision Capabilities for Control of Advanced Energy Plants” is to develop algorithms and methodologies for designing a biomimetic control system for optimal control of advanced energy plants. Traditionally, control systems have been designed based on assumed a priori knowledge of the process system. A number of variables are manipulated to accomplish disturbance rejection and/or servo control performance. While it is possible to adapt the process model based on available data, the control structure and the controllers rarely change. Thus, the knowledge learnt during process operation is lost or remains underutilized. In addition, the business models of today, especially for power plants, are rapidly changing. The power plant operators are being pushed to the edge due to the penetration of renewable energy derived power to the grid, the demand for high efficiency, ever-tightening environmental regulations, and requirements for increased plant availability. Thus, power plant operations need to be agile and should adapt quickly to the dynamic requirements. A number of characteristics distinguish biological systems from the traditional process control systems. Self-organization, distributed intelligence, adaptability, intelligent monitoring, cognition, and decision capabilities are some of the powerful characteristics of the biological world that can be effectively utilized in process control. At the top, the central nervous system (CNS) integrates the information from and coordinates the activities of all parts of the bodies (for bilaterian animals). Inspired by these distinct characteristics, this project seeks to develop methodologies and algorithms to accomplish: (i) self-organization of the control structure for maximizing the plant’s operating profit by mimicking the function of the cortical areas in the human brain, (ii) distributed and adaptive controllers that mimic the rule of pursuit present in ants, (iii) intelligent monitoring of the controllers powered with cognition and decision capabilities that mimic the artificial immune systems, and (iv) seamless coordination and integration in the control system that mimics the CNS.

20 FOSSIL-FUELED POWER PLANTS↗

Benchmarking Anticipated Wind Project Lifetimes: Results from a Survey of U.S. Wind Industry Professionals

This paper draws on a survey of wind industry professionals to clarify trends in the expected useful life of land-based wind power plants in the United States. The expected useful life of a project affects expectations about its profitability, the timing of possible decommissioning or repowering, and its levelized costs. We find that most wind project developers, sponsors and long-term owners have increased project-life assumptions over time, from a typical term of ~20 years in the early 2000s to ~25 years by the mid-2010s and ~30 years more recently. Current assumptions range from 25 to 40 years, with an average of 29.6 years. The estimated average levelized cost of energy (LCOE) for new wind projects built in 2018 is $\$ $40.4/MWh (real 2018$\$ $), assuming a 20-year project life. With a 25-year useful life and no change in assumed operations and maintenance (O&M) expenditures or wind plant performance over time, LCOE declines by 10%, to $\$ $36.2/MWh, because capital costs are recovered over five additional years of production. At the now-common 30-year assumed life, levelized costs decrease another 7%, to $\$ $33.5/MWh (under the same unaltered assumptions about O&M and performance). Even longer assumed lifetimes lead to further (but diminishing) LCOE reductions—e.g., to $\$ $31.7/MWh and $\$ $30.3/MWh for 35- and 40-year lives, respectively. The data and trends presented here may inform assumptions used by electric system planners, modelers and analysts. The results may also provide useful benchmarks to the wind industry, helping developers and assets owners to compare their expectations with those of their peers.

17 WIND ENERGY↗