Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Deficient precipitation sensitivity to Sahel land surface forcings among CMIP5 models

Abstract The overall performance of the simulated seasonal precipitation response to local terrestrial forcings, namely vegetation abundance and soil moisture, in the Sahel among the Coupled Model Intercomparison Project Phase Five (CMIP5) Earth System Models (ESMs) is systematically investigated and compared with its observational counterpart using a multivariate statistical method. The observed seasonal precipitation response is evaluated against a large ensemble of observational, reanalysis, and satellite data sets to provide quantification of uncertainties. The behaviour of models with and without a Dynamic Global Vegetation Model (DGVM) component is also explored, along with the mechanisms responsible for terrestrial feedback on rainfall. In general, the CMIP5 models can reasonably capture the seasonal evolution of Sahel precipitation and soil moisture, albeit with wet biases during the pre‐monsoon period and dry biases during the peak monsoon period. The non‐DGVM ESMs simulate comparable leaf area indices (LAIs) with observations, while DGVM‐enabled ESMs simulate too much year‐round LAI. The variance of precipitation that is attributed to oceanic forcings in CMIP5 is comparable with observations; however, the variance of precipitation that is attributed to terrestrial forcings is smaller in CMIP5 models than observed, especially for non‐DGVM ESMs. CMIP5 models, especially those without DGVMs, undervalue precipitation's observed response strength to soil moisture anomalies. In both observations and CMIP5 models, none of the atmospheric variables show significant responses to direct vegetation forcing, except for the response in transpiration. Although vegetation has minimal direct effect on the atmospheric state, it can affect the atmosphere by modifying soil moisture and transpiration rate indirectly, which helps explain the more realistic simulation of rainfall in DGVM‐enabled ESMs than non‐DGVM ESMs. Coupling of an ESM to a DGVM is critical in generating reasonable land–atmosphere feedback and examining future ecological and climatic changes over the Sahel.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

A multimodel intercomparison of resolution effects on precipitation: simulations and theory

An ensemble of six pairs of RCM experiments performed at 25 and 50 km for the period 1961–2000 over a large European domain is examined in order to evaluate the effects of resolution on the simulation of daily precipitation statistics. Application of the non-parametric two-sample Kolmorgorov–Smirnov test, which tests for differences in the location and shape of the probability distributions of two samples, shows that the distribution of daily precipitation differs between the pairs of simulations over most land areas in both summer and winter, with the strongest signal over southern Europe. Two-dimensional histograms reveal that precipitation intensity increases with resolution over almost the entire domain in both winter and summer. In addition, the 25 km simulations have more dry days than the 50 km simulations. The increase in dry days with resolution is indicative of an improvement in model performance at higher resolution, while the more intense precipitation exceeds observed values. The systematic increase in precipitation extremes with resolution across all models suggests that this response is fundamental to model formulation. Simple theoretical arguments suggest that fluid continuity, combined with the emergent scaling properties of the horizontal wind field, results in an increase in resolved vertical transport as grid spacing decreases. This increase in resolution-dependent vertical mass flux then drives an intensification of convergence and resolvable-scale precipitation as grid spacing decreases. In conclusion, this theoretical result could help explain the increasingly, and often anomalously, large stratiform contribution to total rainfall observed with increasing resolution in many regional and global models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Diurnal cycle of precipitation over global monsoon systems in CMIP6 simulations

Accurate simulation of the diurnal cycle of precipitation over different climate regimes, including global monsoon systems, is an ongoing challenge for current state-of-the-art climate models. Here, in this study, the diurnal cycles of summertime precipitation from 21 CMIP6 historical simulations are evaluated with the NASA IMERG data via the diurnal harmonic amplitude and phase from the Fourier analysis in seven regional monsoon systems: Northern and Southern Africa monsoons, South Asia monsoon, East Asia monsoon, Australia monsoon, and North and South America monsoons. Particularly, we focus on four subregions including ocean, coastal ocean, land, and coastal land considering the different underlying physical processes. It is found that the CMIP6 historical simulations perform fairly well on reproducing the diurnal cycle of precipitation over ocean and coastal ocean, while the simulated diurnal harmonic phase and amplitude over land and coastal land show larger biases and model spread compared to biases over ocean and coastal ocean. The simulation of precipitation diurnal cycle is substantially improved in the multi-model mean of both CMIP6 historical and CMIP6 AMIP simulations compared with that of CMIP5 historical simulations. But the model bias of precipitation diurnal cycle is in general similar between CMIP6 AMIP and CMIP6 historical simulations, which suggests that the impact of the interactive ocean on the simulated diurnal precipitation averaged over a large domain is generally minor. The influence of model resolution on the diurnal cycle is shown in mixed directions across various subregions, and significant improvement from the low- to high-resolution models is only notable over coastal ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Microstructural Evolution and the Precipitation Behavior in X90 Linepipe Steel During Isothermal Processing

Thermomechanical controlled processing of 560-MPa (X90) linepipe steel was simulated in the laboratory using a thermomechanical simulator to study the microstructural evolution and precipitation behavior during isothermal holding. The results indicated that martensite was obtained when the steels were isothermally held for 5 s at 700 °C. Subsequently, granular bainite and acicular ferrite transformation occurred with increased holding time. Different amount of polygonal ferrite formed after isothermally holding for 600-3600 s. Pearlite nucleated after isothermally holding for 3600 s. Precipitation occurred after isothermal holding for 5 s and continuous precipitation occurred at grain boundaries after isothermally holding for 600 s. After isothermally holding for 3600 s, large Nb/Ti carbide precipitated. The presence of MX-type precipitates was confirmed by diffraction pattern. The interphase precipitation (IP) occurred between 5 and 30 s. Maximum hardness was obtained after isothermally holding for 600 s when IP occurred and rapidly decreased to a low value, mainly because polygonal ferrite dominated the microstructure after isothermally holding for 3600 s.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Niobium on the Secondary Precipitates and Tempering Resistance of Spray-Formed M3:2 High-Speed Steel

The precipitation of secondary carbides in spray-formed M3:2 high-speed steels with or without 2% niobium (Nb) addition during overtempering at 600 °C was characterized, and the carbides were identified in detail using transmission electron microscopy. Strengthening in the peak-hardened state is due to coherent precipitates of types MC and M{sub 2}C. During overtempering, the hardness of M3:2 steel greatly decreases due to M{sub 2}C coarsening with the precipitation of M{sub 3}C carbide, whereas the very fine and dense nature of the M{sub 2}C precipitates is responsible for the remarkable long-time strength exhibited by the Nb-containing steel. The MC precipitates, however, are fairly stable. The addition of Nb results in substantial dissolution of Mo and Cr into the matrix prior to tempering, which refines the secondary M{sub 2}C precipitate dispersion and delays overaging reactions; therefore, superior tempering resistance can be obtained.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Inter-Annual Precipitation Variability Decreases Switchgrass Productivity from Arid to Mesic Environments

Cellulosic biofuels are an important source of renewable biomass within the alternative energy portfolio. Switchgrass (Panicum virgatum L.), a perennial C 4 grass native to North America, is widely studied as a biofuel feedstock for its consistently high yields and minimal input requirements. The influences of precipitation amount and temporal variability on the fertilizer response of switchgrass productivity are not fully understood. Moreover, global climate models predict changes in rainfall patterns towards lower and increasingly variable soil water availability in several productive areas worldwide, which may impact net primary production of biofuel crops. We conducted a meta-analysis of aboveground net primary production of switchgrass from 48 publications encompassing 82 different locations, 11 soil types, 52 switchgrass cultivars, fertilizer inputs between 0 to 896 kg N ha –1 year –1 , and 1 to 6 years of annual productivity measures repeated on the same stand. Productivity of the lowland ecotype doubled with N rates > 131 kg N ha –1 year –1 , but upland ecotype productivity increased only by 50%. Results showed an optimum N rate of 30 to 60 kg N ha –1 year –1 for both ecotypes, after which biomass gain per unit of N added decreased. Growing season precipitation (GSPPT) and inter-annual precipitation variability (inter-PPTvar) affected both ecotypes similarly. Long-term mean annual precipitation (MAP) differentially affected lowland and upland productivity, depending on the N level. Productivity responses to MAP and GSPPT were similar for both upland and lowland ecotypes at none or low N rates. When N increased beyond 60 kg N ha –1 year –1 , lowland cultivars had a greater growth response to MAP than uplands. Productivity increased with increasing GSPPT and MAP and had a positive linear response to MAP ranging from 600 to 1200 mm year –1 . One third of the variability in switchgrass production was accounted for by inter-PPTvar. After accounting for MAP, sites with higher inter-PPTvar had lower switchgrass productivity than sites with lower inter-PPTvar. Increased inter-annual variation in precipitation reduced production of both ecotypes. As a result, predicted changes in the amount and timing of precipitation thus likely will exert greater influence on production of upland than lowland ecotypes of switchgrass.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Using post-processing heat treatments to elucidate precipitate strengthening of additively manufactured superalloy 718

The poor machinability and extensive work hardening of Ni-based superalloys makes additive manufacturing an attractive option for producing geometrically complex components with distinct microstructures. Although previous studies show recovery of high strength at room temperature, very few studies demonstrate successful properties at elevated temperatures required for industrial applications. Here, the objectives of this study are to present a post-build heat treatment for high strength across a wide temperature range, determine the strength contribution of nanoscale precipitating phases to the overall mechanical properties of superalloy 718, and from these, provide a comprehensive microstructure-property relationship for wrought and AM 718 to guide efforts to simulate the properties of AM components. Laser powder bed fusion–produced superalloy 718 was characterized at multiple length scales using scanning electron microscopy and transmission electron microscopy in the as-built condition and with multiple heat treatments designed to form combinations of γ', γ", and δ precipitates. Uniaxial tensile tests performed from room temperature to 600 °C on subsize specimens determined the yield strength, elastic modulus, ultimate tensile strength, fracture stress, and uniform elongation. Precipitates in this work proved to be weak barriers to dislocation motion through a dispersed barrier model, but they provided strength to the alloy through their consistent high density. The relative contribution to the yield strength from γ" remained consistent between 48% and 57% of the total strength up to 600 °C, the primary influence on the high temperature strength of superalloy 718. The strength factors for γ" and δ precipitates were found to trend inversely with tensile test temperature and may be attributable to the differences in precipitate coherency. A post-build heat treatment is recommended to maintain high strength at elevated temperatures. A quantitative microstructure-property relationship, dependent on precipitate size, density, and morphology, was derived and can estimate the yield strength across a wide temperature range applicable to the operational regimes for superalloy 718.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Analysis of air mass trajectories to explain observed variability of tritium in precipitation at the Southern Sierra Critical Zone Observatory, California, USA

Understanding the behavior of tritium, a radioactive isotope of hydrogen, in the environment is important to evaluate the exposure risk of anthropogenic releases, and for its application as a tracer in hydrology and oceanography. To understand and predict the variability of tritium in precipitation, HYSPLIT air mass trajectories were analyzed for 16 aggregate precipitation samples collected over a 2 year period at irregular intervals at a research site located at 2000 m elevation in the southern Sierra Nevada (California, USA). Attributing the variation in tritium to specific source areas confirms the hypothesis that higher latitude or inland sources bring higher tritium levels in precipitation than precipitation originating in the lower latitude Pacific Ocean. In this case, the source of precipitation accounts for 79% of the variation observed in tritium concentrations. In conclusion, air mass trajectory analysis is a promising tool to improve the predictions of tritium in precipitation at unmonitored locations and thoroughly understand the processes controlling transport of tritium in the environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Cluster dynamics modeling of Mn-Ni-Si precipitates coupled with radiation-induced segregation in low-Cu reactor pressure vessel steels

Formation of precipitates enhanced or induced by irradiation causes hardening and embrittlement of nuclear structural materials. Post-irradiation microstructure characterization of reactor pressure vessel (RPV) steels has shown that precipitation can be strongly associated with radiation-induced segregation (RIS) of solutes on dislocations. However, RIS and precipitation have not been coupled in previous precipitation modeling of RPV steels. Here in this study, a new hybrid and spatially-dependent precipitation model is developed that couples cluster dynamics with RIS, providing an unique way to account for concurrent evolution of heterogeneous cluster densities as well as solute and point defect concentration profiles. The model is applied to study the segregation of Mn, Ni, and Si on dislocations and heterogeneous nucleation of Mn-Ni-Si rich precipitates (MNSPs) in a low-Cu RPV steel. The result shows that the onset of MNSP nucleation on dislocations occurs at the fluence of 2 x 10 23 n.m -2 . The number density and mean radius can reach ~ 10 24 m -3 and 1-2 nm at high fluence, respectively. These observations suggest that the role of RIS and heterogeneous nucleation can be significant for RPV steels under a high fluence of irradiation. Results of simulations adopting various dose rates and dislocation densities show an increased fraction of MNSPs on dislocations at the condition of low dose rate, high dislocation density, and high fluence.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effect of phosphorus on precipitation in irradiated reactor pressure vessel (RPV) steels

Embrittlement of light water reactor pressure vessels (RPV) steels by fast neutron irradiation may limit extended nuclear plant life. Embrittlement, which is manifested as increases in various indexes of a ductile to brittle transition temperatures (ΔT), is primarily due to hardening by nanoscale precipitates containing Cu, Ni, Mn, and Si, which form under irradiation. In addition to these elements, P has also been found to play a role in embrittlement. While only slightly enriched in the precipitates, hardening and embrittlement increase with trace P concentrations in low-Cu steels. Here, we characterize the individual and synergistic irradiation precipitation and hardening mechanisms in a series of RPV steels containing no to low-Cu and with systematic variations in Ni and P. In this study, the steels were irradiated to a fluence of ~ 1.38 x 10 20 n/cm 2 at ~ 292 °C in the UCSB ATR-2 experiment. In Cu-free medium and high-Ni RPV steels, atom probe tomography shows that P and Ni promotes precipitation of P-Mn-Si-Ni and Mn-Si-Ni precipitates, respectively. The precipitate microstructure correlates with the observed irradiation hardening.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Precipitation in a lead calcium tin anode

Samples from a hot rolled sheet of a tin and calcium bearing lead alloy were solution heat treated at 300 Degree-Sign C and cooled down to room temperature at different rates; these samples were left at room temperature to study natural precipitation of CaSn{sub 3} particles. The samples were aged for 45 days before analysing their microstructure, which was carried out in a scanning electron microscope using secondary and backscattered electron detectors. Selected X-ray spectra analyses were conducted to verify the nature of the precipitates. Images were taken at different magnifications in both modes of observation to locate the precipitates and record their position within the images and calculate the distance between them. Differential scanning calorimeter analyses were conducted on selected samples. It was found that the mechanical properties of the material correlate with the minimum average distance between precipitates, which is related to the average cooling rate from solution heat treatment. - Highlights: Black-Right-Pointing-Pointer The distance between precipitates in a lead alloy is recorded. Black-Right-Pointing-Pointer The relationship between the distance and the cooling rate is established. Black-Right-Pointing-Pointer It is found that the strengthening of the alloy depends on the distance between precipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Structural characteristics of transition-iron-carbide precipitates formed during the first stage of tempering in 4340 steel

Microstructural and crystallographic characteristics of fine-scale transition-iron-carbide precipitates formed in martensite during tempering of 4340 steel at 200 °C for 3.6 ks were studied via transmission electron microscopy. Precipitates of near-equiaxed shapes and about 10 nm in size were observed, and rows of closely spaced precipitates were aligned predominantly along < 100 > martensite directions. Aggregates of aligned precipitates were up to 150 nm in length, although occasional kinks were present that disrupted the alignment, and some of the adjacent precipitates possessed somewhat different crystallographic orientations. Electron-diffraction results were analyzed in detail and found to be consistent with both epsilon-carbide and eta-carbide phases. Similarities between these two phases were highlighted and discussed. Experimental electron-diffraction data were compared with data from five different unit cells, and each was found to be consistent within uncertainty ranges of ± 0.003 nm for interplanar spacings, ± 2° for angles between plane normals, and a few degrees for the orientation relationship between precipitates and the matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Analysis of the extent of interphase precipitation in V-HSLA steels through in-situ characterization of the γ/α transformation

In-situ characterization techniques have been applied to elucidate the influence of γ/α transformation upon the extent of interphase precipitation in a low-carbon, vanadium-HSLA steel. Electron Back-scattered diffraction analyses of the γ/α orientation relationship with continuous cooling at 2 and 10 K/s suggest that the proportion of ferrite likely to hold interphase precipitation varies little with cooling rate. However, TEM analyses show that the interphase precipitation refines with increasing cooling rate in this cooling range. With cooling rates in excess of 20 K/s, interphase precipitation is increasingly suppressed due to the increasingly diffusional-displacive nature of the Widmanstätten γ/α transformation that is activated. The present study illustrates that the extent and dimensions of interphase precipitation can be controlled through controlled cooling. - Highlights: • In-situ characterization of γ/α transformation • EBSD characterization of γ/α transformation orientation relationship • Extent of interphase precipitation can be controlled through controlled cooling.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Microstructure, microtexture and precipitation in the ultrafine-grained surface layer of an Al-Zn-Mg-Cu alloy processed by sliding friction treatment

Precipitate redistribution and texture evolution are usually two concurrent aspects accompanying grain refinement induced by various surface treatment. However, the detailed precipitate redistribution characteristics and process, as well as crystallographic texture in the surface refined grain layer, are still far from full understanding. In this study, we focused on the microstructural and crystallographic features of the sliding friction treatment (SFT) induced surface deformation layer in a 7050 aluminum alloy. With the combination of transmission electron microscopy (TEM) and high angle angular dark field scanning TEM (HAADF-STEM) observations, a surface ultrafine grain (UFG) layer composed of both equiaxed and lamellar ultrafine grains and decorated by high density of coarse grain boundary precipitates (GBPs) were revealed. Further precession electron diffraction (PED) assisted orientation mapping unraveled that high angle grain boundaries rather than low angle grain boundaries are the most favorable nucleation sites for GBPs. The prominent precipitate redistribution can be divided into three successive and interrelated stages, i.e. the mechanically induced precipitate dissolution, solute diffusion and reprecipitation. The quantitative prediction based on pipe diffusion along dislocations and grain boundary diffusion proved the distribution feasibility of GBPs around UFGs. Based on PED and electron backscatter diffraction (EBSD) analyses, the crystallographic texture of the surface UFG layer was identified as a shear texture composed of major rotated cube texture (001) 〈110〉 and minor (111) 〈112〉, while that of the adjoining lamellar coarse grained matrix was pure brass. The SFT induced surface severe shear deformation is responsible for texture evolution. - Highlights: •The surface ultrafine grain layer in a 7050 aluminum alloy was focused. •Precipitate redistribution and texture evolution were discussed. •The quantitative prediction proved the distribution feasibility of GBPs. •Precession electron diffraction orientation mapping showed a shear texture.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Precipitation behavior of ωo phase and texture evolution of a forged Ti-45Al-8.5Nb-(W, B, Y) alloy during creep

Highlights: • The morphology of ω{sub o} and residual β{sub o} phases depends on creep temperature and stress. • Stress can increase the tendency of the α{sub 2} to ω{sub o} phase transformation. • The strength of the texture components depend on temperature and stress. • β{sub o}(ω{sub o}) precipitation retards the growth of recrystallized γ grains. • ω{sub o} precipitation resists and deflects the crack during the crack propagation. - Abstract: Creep rupture tests of the as-forged Ti-45Al-8.5Nb-(W,B,Y) alloy with a duplex microstructure were carried out at 750–850 °C and 130–300 MPa. An investigation was performed to study the effects of temperature and stress on the microstructure and texture evolution, as well as on the creep properties of the forged high Nb-containing TiAl alloy with a duplex microstructure. The results show that the stress exponent n = 2.8–3.3, and the creep activation energy values are in the range of 300–400 kJ/mol. After creep, a regular arrangement of ω{sub o} precipitations was observed in the β{sub o} region. The un-transformed β{sub o} phase, which remained in the ω{sub o} interval, was examined using high resolution transmission electron microscope (HRTEM). It is shown that the growth of ω{sub o} precipitations and the morphology of residual β{sub o} phases are related to the creep temperature and stress. Certain β{sub o} stabilizer elements, such as Nb, segregate into α{sub 2} plates and cause ω{sub o} precipitation during dissolution of α{sub 2} plates at high temperature. The interfacial structure between the ω{sub o} and α{sub 2} phases was studied in detail using HRTEM. Meanwhile, texture evolution and dynamic recrystallization of the γ phase were studied using electron backscatter diffraction (EBSD). Observations on the deformation structure also demonstrate that ω{sub o} precipitation acts as an obstacle inhibiting crack propagation and growth of the γ phase. The corresponding formation mechanism and possible effects on creep are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting

Highlights: • The γ austenite matrix shows a fine cellular substructure. • γ′ and three variants of γ″ precipitates around 10–50 nm develop within cellular γ. • Coarser acicular γ″ and plate-like δ occur at grain boundaries and intragranular γ. • The orientation relationships of γ″ with γ, and of δ with γ are observed. - Abstract: Inconel 718 alloy samples were fabricated by selective laser melting (SLM). Microstructure and precipitation in solution-heat-treated- and double-aging-SLM-made Inconel 718 were studied by scanning and transmission electron microscopy. Electron microscope observations showed that disc-shaped and cuboidal γ″, and circular γ′ precipitates with an average size of 10–50 nm developed within cellular γ austenite matrix. The simulated, experimentally observed electron diffraction patterns, and dark-field imaging further revealed that the precipitation of three variants of γ″ in the γ matrix occurred. The coarser acicular γ″, and globular as well as plate-like δ phases precipitated at grain boundaries and also within the interior of austenite matrix. The morphology, distribution and crystallography of these precipitates and their formation mechanisms were analyzed and discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microstructural evolution of ω assisted α precipitates in β-CEZ alloy during ageing process

Highlights: • Ultrafine Athermal ω precipitates were formed in β-CEZ alloy by quenching from above the β transus temperature. • In the ageing process, these ω precipitates coarsen, accompanied by the form of needle-like α phase. • ω precipitates were formed by {111}β planes shift 0.5d222 along the direction. • The superfine α particles are formed in close proximity of the ω/β interface. - Abstract: The microstructural evolution in β-CEZ (Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe wt%) alloy, after quenching and ageing, has been investigated by combining results from orientation imaging microscopy, transmission electron microscopy, high-resolution TEM (HRTEM). Ultrafine Athermal ω precipitates (about 1 nm) are formed in this alloy by quenching from above the β transus temperature. In the ageing process, these ω precipitates coarsen, accompanied by the form of needle-like α phase. The scale of ω assisted α increased from 5 to 10 nm in width and about 50 nm in length to 10 nm in width and 100–300 nm in length while extending ageing time from 2 h to 5 h at 350 °C. However, when going on extending the ageing time from 5 h to 20 h at 350 °C, the scale of α didn't grow dramatically but the density of α increased clearly. When increasing the ageing temperature from 350 °C to 450 °C, the scale of ω assisted α grow dramatically. Furthermore, the structural relationship of ω and α is observed by HRTEM images. It can be found that ω precipitates were formed by {111}β planes shift 0.5d222 along the <111> direction, and the superfine α particles are formed in close proximity of the ω/β interface.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Impact of targeted chemistries on maraging steel precipitation evolution observed using SANS and APT

Highlights: • Precipitate formation was targeted by varying overallchemistry; reducing Mo, W to target laves phase, and Al for β-phase • A severe reduction in Mo and W caused a significant change inprecipitate composition, forming a Cr rich laves • Chemistry changes impact precipitate size and volume fraction during aging • The changes in precipitation behaviour due to chemistry impacts hardness, tensile and creep properties of the material - Abstract: Building on a previous study of the novel aerospace maraging steel known as F1E, SANS and atom probe tomography (APT) have been used to study three variant chemistries designed to impact the growth and development of either laves or β-phase precipitates. One chemistry reduced the available laves forming elements, Mo and W, resulting in a reduction in both austenitization and aging laves populations. A second chemistry reduced the β-phase forming element, Al, causing a reduction in the nucleating laves but not β-phase precipitates. Mechanical properties such as tensile, creep and hardness are examined with respect to the precipitate populations.

36 MATERIALS SCIENCE↗