Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA SHEATH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

One-dimensional particle-in-cell simulation on the influence of electron and ion temperature on the sheath expansion process in the post-arc stage of vacuum circuit breaker

The inter-contact region of vacuum circuit breakers is filled with residual plasma at the moment when the current is zero after the burning of metal vapor arc. The residual plasma forms an ion sheath in front of the post-arc cathode. The sheath then expands towards the post-arc anode under the influence of a transient recovery voltage. In this study, a one-dimensional particle-in-cell model is developed to investigate the post-arc sheath expansion. The influence of ion and electron temperatures on the decrease in local plasma density at the post-arc cathode side and post-arc anode side is discussed. When the decay in the local plasma density develops from the cathode and anode sides into the high-density region and merges, the overall plasma density in the inter-contact region begins to decrease. Meanwhile, the ion sheath begins to expand faster. Furthermore, the theory of ion rarefaction wave only explains quantitatively the decrease in the overall plasma density at relatively low ion temperatures. With the increase of ion temperature to certain extent, another possible reason for the decrease in the overall plasma density is proposed and results from the more active thermal diffusion of plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oscillations of the collisionless sheath at grazing incidence of the magnetic field

An Eulerian Vlasov code is used to study the physics of a collisionless sheath with grazing angles of incidence of the magnetic field. The electrons are treated with a parallel-B kinetic equation. In the case where the ion gyroradius is large compared to the Debye length, the electrons, frozen by the magnetic field line, have to move rapidly along the magnetic field B in their attempt to follow the ions gyrating perpendicular to B. Below a critical angle of incidence of the magnetic field, the large gyroradius ions can be scraped off at the plasma-wall interface of the sheath. The electrons now determine the characteristic time for information propagation, with low frequency oscillations appearing in the system. In the case where the ion gyroradius is reduced to the same order as the Debye length, the results evolve closer to those of the classical sheath, and the amplitude of the low frequency oscillations is reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion heating mechanism in a modified Penning discharge

Ions with Maxwellian energy distributions and kinetic temperatures ranging from 20 eV to 7 keV have been observed in a modified Penning discharge operating in the steady state. Investigation of the plasma revealed two distinct spoke-like concentrations of charge rotating with different velocities in the sheath between the plasma and the anode ring. The faster spoke consists of electrons rotating with the E/B drift velocity, where E is the electric field and B is the magnetic field strength. The slow spoke consists of ions, the thermal velocity of which is observed to be proportional to the spoke velocity. The experimental data are consistent with a model whereby the ion drift velocity in this spoke, corresponding to kilovolt ion energies, is Maxwellianized by strong electrostatic turbulence in the sheath. Theoretical expressions are derived for the frequency of the electron and ion spoke rotation, for the ion kinetic temperature, and for the ion heating efficiency as functions of the discharge parameters. These expressions are shown to be consistent with extensive experimental data.

Roth, J. R.↗

Plasma Interaction with Electron-Emitting Surfaces

Electron emission from surfaces occurs in many plasma systems. Several types including secondary, thermionic and photon-induced emissions are intense under certain conditions. Understanding the effects of emission on the sheaths that govern plasma-surface interaction is important. This dissertation predicts some emitting sheath phenomena that were not reported in past studies. For example, most previous theoretical models assumed that an emitting sheath potential is always negative and that ions always accelerate into the wall. We show when the emission is intense that the sheath potential can become positive, fundamentally changing how the plasma and wall interact. In this inverse sheath state, ions are repelled, suggesting for instance that (a) no presheath exists in the plasma interior, (b) emitting walls could be used in applications to stop sputtering. Another topic considered is the transit of emitted electrons across the plasma to other surfaces, which is possible in low collisionality plasma systems. When transit occurs, the flux balance is a complex global problem where the sheaths at opposite surfaces are coupled through their exchange of emitted electrons. We also show that secondary emission can trigger a variety of sheath instability phenomena that change the state of the plasma-wall system or cause oscillations preventing steady state. Lastly, we analyze a mechanism where emitted electrons return to the same surface and knock out secondaries, which return and knock out more secondaries, etc., feedback amplifying the emission intensity. The four phenomena will be analyzed theoretically and verified with particle-in-cell simulations: (a) inverse sheath, (b) sheath coupling via transiting electrons, (c) sheath instabilities, (d) returning electron amplification. Consequences of these processes on the sheath potentials, wall heating, loss rate of charge, and cross field transport (near-wall conductivity) are discussed throughout. Possible implications are suggested for fusion machines, plasma propulsion engines, probes, dusty plasmas, RF discharges, and surfaces in space.

Fusion↗

A survey of the plasma electron environment of Jupiter - A view from Voyager

A survey of the plasma environment within Jupiter's bow shock is given in terms of the in situ calibrated electron plasma measurements made between 10 eV and 5.95 keV by the Voyager Plasma Science Experiment (PLS). The measurements are analyzed and corrected for spacecraft potential variations; the data are reduced to nearly model independent macroscopic parameters of the local electron density and temperature. The electron parameters are derived without reference to or internal calibration from the positive ion measurements made in the PLS experiment. Extensive statistical and direct comparisons with other determinations of the local plasma charge density indicate clearly that the analysis procedures have successfully and routinely discriminated between spacecraft sheath and ambient plasmas.

Scudder, J. D.↗

Facility Effects on the Ion Characteristics of A 12.5-Kw Hall Thruster

During a laser-induced fluorescence test of a 12.5-kW magnetically-shielded Hall thruster, ion characteristics in the discharge channel and near the poles were measured as the background pressure and electrical configuration were varied. The acceleration zone of the thruster moved upstream by 2% and 10% of the channel length when the background pressure was raised to 1.8 times and 7 times the lowest achievable pressure, respectively. Examination of the characteristics of the ions near the pole covers suggested that as the background pressure decreased the pole covers may be experiencing more erosion. When operating at a discharge voltage of 300 V, the acceleration zone was observed to be at the same location for all electrical configurations. When operating at a discharge voltage of 600V, the acceleration zone was observed to move 3% of the channel length upstream when the thruster body was floated instead of tied to the cathode or grounded to the facility. Characteristics of the ions bombarding the pole covers did not vary across the tested electrical configurations. This observation combined with thruster body voltage measurements suggested that varying the electrical configuration only affected the thruster body sheath voltage and did not affect the plasma potential beyond the sheath.

Electric propulsion↗

Enhancement of Ohmic and Stochastic Heating by Resonance Effects in Capacitive Radio Frequency Discharges: A Theoretical Approach

In low-pressure capacitive radio frequency discharges, two mechanisms of electron heating are dominant: (i) Ohmic heating due to collisions of electrons with neutrals of the background gas and (ii) stochastic heating due to momentum transfer from the oscillating boundary sheath. In this work we show by means of a nonlinear global model that the self-excitation of the plasma series resonance which arises in asymmetric capacitive discharges due to nonlinear interaction of plasma bulk and sheath significantly affects both Ohmic heating and stochastic heating. We observe that the series resonance effect increases the dissipation by factors of 2-5. We conclude that the nonlinear plasma dynamics should be taken into account in order to describe quantitatively correct electron heating in asymmetric capacitive radio frequency discharges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of the Chodura sheath on tungsten ionization and emission in tokamak divertors

The decay of the electric potential in the sheath region in tokamak divertors occurs on a scale length on the order of the main ion gyroradius (Chodura sheath) due to magnetic fields lines intersecting the divertor plates at grazing incidence. As a consequence, high-Z impurities like tungsten ionize within the sheath region in attached plasma conditions. The modification of the electron distribution in the sheath region must thus be taken into account to accurately model ionization and emission of impurities within the sheath region. To that end, an analytical expression of the distribution of the vertical ionization path for impurities sputtered from divertor plasma-facing components is derived. This expression is then used to estimate the fraction of neutral impurities ionizing within the sheath and the average vertical ionization path, and to derive an effective SXB (the number of ionizations per emitted photon) coefficient which includes the effects of the variation of the electron distribution in the sheath region. These results are applied to tungsten impurities sputtered from divertor plates. It is shown that the SXB coefficient for neutral tungsten is significantly reduced in high-density attached divertor plasma conditions (n e ≳ 5 × 10 13 cm -3 ) because of the ionization of neutral tungsten well within the sheath region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-induced fluorescence measurements of ion fluctuations in electron and ion presheaths

Electrostatic flow-driven instabilities have been predicted in the presheath region of low-temperature plasmas for both ion and electron rich sheaths. The ion-acoustic fluctuations that arise from these instabilities can influence transport through an enhanced collision rate. In this work, ion fluctuation spectra were measured using laser-induced fluorescence (LIF) in the presheath region for both sheath polarities. Furthermore, the non-invasive nature of LIF compared to that of probes is particularly valuable for these measurements because the sheath and presheath around a probe may generate their own flow-driven instabilities, which obscure the measurement. Measurements were made using a recently implemented field programmable gate array-based system able to measure ion fluctuation spectra up to 1 MHz using a two-point correlation function technique. Narrow bandwidth ion fluctuations were observed near 0:46 f pi (460 kHz) for both sheath polarities, where f pi is the ion plasma frequency. The observed fluctuations were significantly stronger in the electron sheath case and were observed over a larger volume of plasma. Fluctuations were measured in the ion sheath case at locations far enough from the sheath that linear theory predicts stability, suggesting that ion-acoustic instabilities generated in the relatively small unstable region near the boundary reflect from the sheath and perturb a much larger volume of the plasma. This is expected to affect probes with both ion and electron rich sheaths, meaning any dc biased probe may effectively act as an ion-acoustic wave antenna. These measurements are consistent with the recent theory and particle-in-cell results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generalized Bohm’s criterion and negative anode voltage fall in electric discharges

The value of the voltage fall across the anode sheath is found as a function of the current density. Analytic solutions are obtained in a wide range of the ratio of the directed velocity of plasma electrons v{sub 0} to their thermal velocity v{sub T}. It is shown that the voltage fall in a one-dimensional collisionless anode sheath is always negative. At the small values of v{sub 0}/v{sub T}, the obtained expression asymptotically transforms into the Langmuir formula. Generalized Bohm’s criterion for an electric discharge with allowance for the space charge density ρ(0), electric field E(0), ion velocity v{sub i}(0), and ratio v{sub 0}/v{sub T} at the plasma-sheath interface is formulated. It is shown that the minimum value of the ion velocity v{sub i}{sup *}(0) corresponds to the vanishing of the electric field at one point inside the sheath. The dependence of v{sub i}{sup *} (0) on ρ(0), E(0), and v{sub 0}/v{sub T} determines the boundary of the existence domain of stationary solutions in the sheath. Using this criterion, the maximum possible degree of contraction of the electron current at the anode is determined for a short high-current vacuum arc discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional particle-in-cell Monte Carlo simulation of a miniature inductively coupled plasma source

Two-dimensional axisymmetric particle-in-cell simulations with Monte Carlo collision calculations (PIC-MCC) have been conducted to investigate argon microplasma characteristics of a miniature inductively coupled plasma source with a 5-mm-diameter planar coil, where the radius and length are 5 mm and 6 mm, respectively. Coupling the rf-electromagnetic fields to the plasma is carried out based on a collisional model and a kinetic model. The former employs the cold-electron approximation and the latter incorporates warm-electron effects. The numerical analysis has been performed for pressures in the range 370-770 mTorr and at 450 MHz rf powers below 3.5 W, and then the PIC-MCC results are compared with available experimental data and fluid simulation results. The results show that a considerably thick sheath structure can be seen compared with the plasma reactor size and the electron energy distribution is non-Maxwellian over the entire plasma region. As a result, the distribution of the electron temperature is quite different from that obtained in the fluid model. The electron temperature as a function of rf power is in a reasonable agreement with experimental data. The pressure dependence of the plasma density shows different tendency between the collisional and kinetic model, implying noncollisional effects even at high pressures due to the high rf frequency, where the electron collision frequency is less than the rf driving frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of laser-ablation plasma potential with external electrodes

The potential of a laser-ablation plasma was controlled stably up to +2 kV by using external ring electrodes. A stable electron sheath was formed between the plasma and the external electrodes by placing the ring electrodes away from the boundary of the drifting plasma. The plasma kept the potential for a few μs regardless of the flux change of the ablation plasma. We also found that the plasma potential changed with the expansion angle of the plasma from the target. By changing the distance between the plasma boundary and the external electrodes, we succeeded in controlling the potential of laser-ablation plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of the ion energy spectrum in EUV-induced hydrogen plasma

The dynamics of the ion energy spectrum in low-pressure (10–100 Pa) hydrogen plasma induced by extreme ultraviolet (EUV) pulses in the wavelength range of 10–20 nm was studied experimentally. The plasma was generated under cathode irradiation due to both direct gas ionization by EUV photons and impact ionization by high-energy secondary electrons. The dynamics of the spectra of ions incident on the cathode was measured using a time-resolved retarding field energy analyzer. It is shown that the ion spectrum dynamics is completely determined by the time evolution of the cathode sheath. At low gas pressures (<20 Pa), the ion spectrum at early moments after the EUV pulse has a peaked shape, typical of a collisionless plasma sheath, and is mainly determined by the cathode voltage. As the pressure increases, the peak broadens and low energy ions appear in the spectrum due to ion collisions in the cathode sheath. An increase in the role of collisions with decreasing plasma density is also observed in the time evolution of ion spectra.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion Transport Modeling in Non-Collisional RF Sheaths

A reactor scale ICP plasma model does not adequately resolve the submillimeter scale rf sheaths due to severe disparities in length and times scales. These non-collisional sheaths determine the spread in the ion bombardment energy distribution on the wafer. Analytical models based on "damped potential" has been used by various authors to simplify sheath modeling. However, inherent in these models are some assumptions that may be invalid. In this work we show that simplifying assumptions such as a uniform ion flux may be in error by as much as 200% at 13.56MHz. This work involves solving ion transport in non-collisional rf sheaths. A comprehensive study of the dependence of ion flux and energy on uncertainties in the sheath-presheath (i.e. sheath thickness) boundary will also be done.

Meyyappan, M.↗

Analytic Models of Near-Field RF Sheaths

An analytic model is derived for electromagnetic rf wave propagation in a plasma-filled waveguide with rf sheath boundary conditions. The model gives a simplified description of the rf fields and sheath potentials near an ICRF antenna under certain conditions. It assumes an equilibrium magnetic field that is slightly tilted from the normal to the current straps. The rf fields and sheath voltage are calculated in the low-density limit and for the general plasma dielectric using an ordering. The model shows that the launched fast wave couples to a slow wave to satisfy the sheath BC, and the sheath capacitance modifies the relative voltage drops across the plasma and the sheaths. The phasing dependence of the sheath voltage is shown, and a condition is given for validity of the vacuum-field sheath model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma and magnetospheric research

Research and development in plasmas and magnetospheric environments is reported. Topics discussed include: analysis and techniques of software development; data analysis and modeling; spacecraft sheath effects; laboratory plasma flow studies; instrument development.

Comfort, R. H.↗

Influence of the transverse dimension on the structure and properties of dc glow discharges

Two-dimensional (2D) simulations of a dc glow discharge with a cold cathode in argon have been performed for various radii of the discharge tube. It is shown that the loss of the charged particles to the walls can significantly affect plasma parameters as well as properties of the cathode sheath. The longitude dimensions of the negative glow and Faraday dark space depend on the transverse loss of the charge particles and are not consistently predicted with a 1D model. The common assumption that the cathode sheath can be analyzed independently of the plasma also may not be valid. The transverse inhomogeneity of the plasma leads to a change in the current density distribution over the cathode surface. The thickness of the cathode sheath can vary with radial distance from the discharge axis, even for the case of negligible radial loss of the charge particles. The 2D model results provide an analysis of the conditions of applicability of the 1D model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigating instabilities in magnetized low-pressure capacitively coupled RF plasma using particle-in-cell (PIC) simulations

The effect of a uniform magnetic field on particle transport in low-pressure radio frequency (RF) capacitively coupled plasma (CCP) has been studied using a particle-in-cell model. Three distinct regimes of plasma behavior can be identified as a function of the magnetic field. In the first regime at low magnetic fields, asymmetric plasma profiles are observed within the CCP chamber due to the effect of $\overrightarrow{E}$ × $\overrightarrow{B}$ drift. As the magnetic field increases, instabilities develop and form self-organized spoke-shaped structures that are distinctly seen within the bulk plasma closer to the sheath. In this second regime, the spoke-shaped coherent structures rotate inside the plasma chamber in the -$\overrightarrow{E}$ × $\overrightarrow{B}$ direction, where $\overrightarrow{E}$ × $\overrightarrow{B}$ are the DC electric and magnetic field vectors, respectively, and the DC electric field exists in the sheath and pre-sheath regions. The spoke rotation frequency is in the megahertz range. As the magnetic field strength increases further, the rotating coherent spokes continue to exist near the sheath. The coherent structures are, however, accompanied by new small-scale incoherent structures originating and moving within the bulk plasma region away from the sheath. This is the third regime of plasma behavior. The threshold values of the magnetic field between these regimes were found not to vary with changing plasma reactor geometry (e.g., area ratio between ground and powered electrodes) or the use of an external capacitor between the RF-powered electrode and the RF source. The threshold values of the magnetic field between these regimes shift toward higher values with increasing gas pressure. Analysis of the results indicates that the rotating structures are due to the lower hybrid instability driven by density gradients and electron-neutral collisions. This paper provides guidance on the upper limit of the magnetic field for instability-free operation in low-pressure CCP-based semiconductor deposition and etch systems that use the external magnetic field for plasma uniformity control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗