Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Reaction mechanisms of atomic layer deposition of TaN{sub x} from Ta(NMe{sub 2}){sub 5} precursor and H{sub 2}-based plasmas

The reaction mechanisms of plasma-assisted atomic layer deposition (ALD) of TaN{sub x} using Ta(NMe{sub 2}){sub 5} were studied using quadrupole mass spectrometry (QMS). The fact that molecule dissociation and formation in the plasma have to be considered for such ALD processes was illustrated by the observation of 4% NH{sub 3} in a H{sub 2}-N{sub 2} (1:1) plasma. Using QMS measurements the reaction products during growth of conductive TaN{sub x} using a H{sub 2} plasma were determined. During the Ta(NMe{sub 2}){sub 5} exposure the reaction product HNMe{sub 2} was detected. The amount of adsorbed Ta(NMe{sub 2}){sub 5} and the amount of HNMe{sub 2} released were found to depend on the number of surface groups generated during the plasma step. At the beginning of the plasma exposure step the molecules HNMe{sub 2}, CH{sub 4}, HCN, and C{sub 2}H{sub 2} were measured. After an extended period of plasma exposure, the reaction products CH{sub 4} and C{sub 2}H{sub 2} were still present in the plasma. This change in the composition of the reaction products can be explained by an interplay of aspects including the plasma-surface interaction, the ALD surface reactions, and the reactions of products within the plasma. The species formed in the plasma (e.g., CH{sub x} radicals) can re-deposit on the surface and influence to a large extent the TaN{sub x} material composition and properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic effects of self-organization in low-temperature magnetized plasmas (Final Report for DE-SC0019045: 9/1/2018-8/31/2019)

The research goal of this Early Career Research Program project is to advance the science of low temperature magnetized plasmas using first-principles kinetic, e.g., solving the Boltzmann equation, models. A better understanding of the plasma transport properties, such as electrical resistivity and thermal conductivity must be obtained to better control and design magnetized plasma sources. A key physical phenomenon in low-temperature magnetized plasmas is the self-organization of plasma flows, e.g., coherent plasma structures and transition between different discharge modes. Understanding the physics of coherent plasma structures has been identified as one of the four important frontier topics in a recent workshop by the Office of Fusion Energy Science. These self-emerging plasma patterns results from the nonlinear coupling between plasma constituents (ions, electrons, and neutral atoms), electromagnetic fields, and materials. The physics of low-temperature magnetized plasmas is particularly complex because (i) the collisionless instabilities affect collisional phenomena (ionization, transport, etc.) and vice versa and (ii) the presence of materials (sheath, electron injection, etc.) influences the bulk plasma properties in low-temperature plasma (LTP) devices. Computational models of these plasma flows remain challenging because the plasma density can vary several orders of magnitudes, a wide range of temporal and spatial scales must be resolved, the phenomena are inherently three-dimensional, and various physical processes, such as wall interaction, instabilities, inelastic collisions, etc., must be simultaneously and self-consistently taken into account. Understanding the fundamental transport mechanisms in cross-field configurations enables additional controllability of plasma properties and electron energy distribution functions (EEDFs).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reinforced carbon-carbon oxidation behavior in convective and radiative environments

Reinforced carbon-carbon, which is used as thermal protection on the space shuttle orbiter wing leading edges and nose cap, was tested in both radiant and plasma arcjet heating test facilities. The test series was conducted at varying temperatures and pressures. Samples tested in the plasma arcjet facility had consistently higher mass loss than those samples tested in the radiant facility. A method using the mass loss data is suggested for predicting mission mass loss for specific locations on the Orbiter.

Curry, D. M.↗

Size effect on electronic transport in nC–Si/SiO{sub x} core/shell quantum dots

Highlights: ► Electrical conductivity (σ) demonstrated to exhibit quantum size effect for Si-QDs. ► High σ ∼ 4 × 10{sup −2} S cm{sup −1} for Si-QDs of average size ∼3.7 nm, number density ∼4.8 × 10{sup 11} cm{sup −2}. ► Heterojunction-like band-structure at the QD interface controls electronic transport. -- Abstract: Electronic transport in silicon quantum dots (Si-QDs) in core/shell configuration was studied. The nC–Si cores encapsulated by protective SiO{sub x} shells embedded in a-Si matrix were obtained from one-step and spontaneous plasma processing, at low substrate temperature (300 °C) compatible for device fabrication. The size, density and distribution of nC–Si QDs were controlled by optimizing the plasma parameters. Very high electrical conductivity, σ ∼ 4 × 10{sup −2} S cm{sup −1}, was achieved at a total number density of Si-QDs, N ∼ 4.8 × 10{sup 11} cm{sup −2}, corresponding to the lowering in its average core size, d ∼ 3.7 nm, to the order of the bulk Si exciton Bohr radius and the associated quantum confinement effects. The electrical conductivity was demonstrated to exhibit quantum size (3 < d (nm) < 10) effect in zero dimensional quantum dots. The underlying electronic transport was explained using heteroquantum-dot model, the nC–SiO{sub x}:H QDs possess hetero-junction like band structure in the interface regions, due to their different band gaps.

36 MATERIALS SCIENCE↗

International Space Station (ISS) Plasma Contactor Unit (PCU) Utilization Plan Assessment Update

The International Space Station (ISS) vehicle undergoes spacecraft charging as it interacts with Earth's ionosphere and magnetic field. The interaction can result in a large potential difference developing between the ISS metal chassis and the local ionosphere plasma environment. If an astronaut conducting extravehicular activities (EVA) is exposed to the potential difference, then a possible electrical shock hazard arises. The control of this hazard was addressed by a number of documents within the ISS Program (ISSP) including Catastrophic Safety Hazard for Astronauts on EVA (ISS-EVA-312-4A_revE). The safety hazard identified the risk for an astronaut to experience an electrical shock in the event an arc was generated on an extravehicular mobility unit (EMU) surface. A catastrophic safety hazard, by the ISS requirements, necessitates mitigation by a two-fault tolerant system of hazard controls. Traditionally, the plasma contactor units (PCUs) on the ISS have been used to limit the charging and serve as a "ground strap" between the ISS structure and the surrounding ionospheric plasma. In 2009, a previous NASA Engineering and Safety Center (NESC) team evaluated the PCU utilization plan (NESC Request #07-054-E) with the objective to assess whether leaving PCUs off during non-EVA time periods presented risk to the ISS through assembly completion. For this study, in situ measurements of ISS charging, covering the installation of three of the four photovoltaic arrays, and laboratory testing results provided key data to underpin the assessment. The conclusion stated, "there appears to be no significant risk of damage to critical equipment nor excessive ISS thermal coating damage as a result of eliminating PCU operations during non- EVA times." In 2013, the ISSP was presented with recommendations from Boeing Space Environments for the "Conditional" Marginalization of Plasma Hazard. These recommendations include a plan that would keep the PCUs off during EVAs when the space environment forecast input to the ISS charging model indicates floating potentials (FP) within specified limits. These recommendations were based on the persistence of conditions in the space environment due to the current low solar cycle and belief in the accuracy and completeness of the ISS charging model. Subsequently, a Noncompliance Report (NCR), ISS-NCR-232G, Lack of Two-fault Tolerance to EVA Crew Shock in the Low Earth Orbit Plasma Environment, was signed in September 2013 specifying new guidelines for the use of shock hazard controls based on a forecast of the space environment from ISS plasma measurements taken prior to the EVA [ISS-EVA-312-AC, 2012]. This NESC assessment re-evaluates EVA charging hazards through a process that is based on over 14 years of ISS operations, charging measurements, laboratory tests, EMU studies and modifications, and safety reports. The assessment seeks an objective review of the plasma charging hazards associated with EVA operations to determine if any of the present hazard controls can safely change the PCU utilization plan to allow more flexibility in ISS operations during EVA preparation and execution.

Hernandez-Pellerano, Amri↗

Nonthermal hydrogen plasma-enabled ambient, fast lignin hydrogenolysis to valuable chemicals and bio-oils

The reduction of fossil fuel resources and the ongoing surge in global energy demand have captured the interest of researchers worldwide, prompting a focus on developing renewable energy sources. For this reason, biomass conversion has emerged as a crucial pathway for renewable fuel production. Lignin, constituting 10–35% of woody biomass, represents a significant and largely untapped sustainable feedstock. Despite the potential of lignin, a substantial portion of this lignocellulosic residue remains unused, with approximately 60% considered waste. This study addresses the challenge of underutilized lignin by introducing an innovative approach to its hydrogenolysis. Despite their potential, existing hydrogenolysis methods face obstacles such as complexity, high cost, and the need for high temperatures or pressures. Herein we report a noncatalytic nonthermal hydrogen plasma method for lignin hydrogenolysis, conducted under ambient temperature and pressure conditions. Our method proves to be highly effective in breaking lignin bonds, achieving complete conversion, and generating valuable gaseous and bio-oil products including methane and aromatic dimers and monomers obtained from guaiacyl and syringyl units within the lignin structure. Our results showed an increase in gaseous products, especially methane, and aromatic monomer yields, as well as a reduction in total bio-oil and biochar yields and lignin functional groups by increasing reaction time, input power, and H2 partial pressure. This research confirms the considerable promise of utilizing noncatalytic nonthermal hydrogen plasma-assisted hydrogenolysis as an effective technique for producing gaseous and liquid fuels from lignin.

Pishva, Parsa↗

Development of a LIBS system for in situ surface measurements during plasma exposure in PISCES-A

A laser-induced breakdown spectroscopy (LIBS) system has been developed with a Q-switched Nd:YAG laser (wavelength = 1064 nm and pulse width ~5 ns) to conduct in situ surface measurements during plasma exposure in the PISCES-A linear divertor plasma simulator. The LIBS signal enhancement is obtained with both the magnetic field normal to the surface of a target and steady-state background plasma. Migration of sputtered Ta impurities onto the neighboring Cr surface is identified during He plasma exposure, only when cone structures are formed on the Cr surface. D retention in W during D plasma exposure is observed to decrease with increasing the sample temperature. The temporal evolution of D outgassing from W is measured in a time range of ~10-420 s right after D plasma exposure. A power law fit, t - α , yields α ~ 0.34 ± 0.09, which is nearly consistent with calculated and measured values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solution precursor plasma deposition of nanostructured ZnO coatings

Highlights: {yields} The solution precursor route employed is an inexpensive process with capability to produce large scale coatings at fast rates on mass scale production. {yields} It is highly capable of developing tailorable nanostructures. {yields} This technique can be employed to spray the coatings on any kind of substrates including polymers. {yields} The ZnO coatings developed via solution precursor plasma spray process have good electrical conductivity and reflectivity properties in spite of possessing large amount of particulate boundaries, porosity and nanostructured grains. -- Abstract: Zinc oxide (ZnO) is a wide band gap semiconducting material that has various applications including optical, electronic, biomedical and corrosion protection. It is usually synthesized via processing routes, such as vapor deposition techniques, sol-gel, spray pyrolysis and thermal spray of pre-synthesized ZnO powders. Cheaper and faster synthesis techniques are of technological importance due to increased demand in alternative energy applications. Here, we report synthesis of nanostructured ZnO coatings directly from a solution precursor in a single step using plasma spray technique. Nanostructured ZnO coatings were deposited from the solution precursor prepared using zinc acetate and water/isopropanol. An axial liquid atomizer was employed in a DC plasma spray torch to create fine droplets of precursor for faster thermal treatment in the plasma plume to form ZnO. Microstructures of coatings revealed ultrafine particulate agglomerates. X-ray diffraction confirmed polycrystalline nature and hexagonal Wurtzite crystal structure of the coatings. Transmission electron microscopy studies showed fine grains in the range of 10-40 nm. Observed optical transmittance ({approx}65-80%) and reflectivity ({approx}65-70%) in the visible spectrum, and electrical resistivity (48.5-50.1 m{Omega} cm) of ZnO coatings are attributed to ultrafine particulate morphology of the coatings.

36 MATERIALS SCIENCE↗

Energetic deposition of carbon in a cathodic vacuum arc with a biased mesh

Carbon films were deposited in a filtered cathodic vacuum arc with a bias potential applied to a conducting mesh mounted in the plasma stream between the source and the substrate. We determined the stress and microstructural properties of the resulting carbon films and compared the results with those obtained using direct substrate bias with no mesh. Since the relationship between deposition energy and the stress, sp{sup 2} fraction and density of carbon are well known, measuring these film properties enabled us to investigate the effect of the mesh on the energy and composition of the depositing flux. When a mesh was used, the film stress showed a monotonic decrease for negative mesh bias voltages greater than 400V, even though the floating potential of the substrate did not vary. We explain this result by the neutralization of some ions when they are near to or passing through the negatively biased mesh. The microstructure of the films showed a change from amorphous to glassy carbonlike with increasing bias. Potential applications for this method include the deposition of carbon films with controlled stress on low conductivity substrates to form rectifying or ohmic contacts.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE COOL SURGE FOLLOWING FLUX EMERGENCE IN A RADIATION-MHD EXPERIMENT

Cool and dense ejections, typically Hα surges, often appear alongside EUV or X-ray coronal jets as a result of the emergence of magnetized plasma from the solar interior. Idealized numerical experiments explain those ejections as being indirectly associated with the magnetic reconnection taking place between the emerging and preexisting systems. However, those experiments miss basic elements that can importantly affect the surge phenomenon. In this paper we study the cool surges using a realistic treatment of the radiation transfer and material plasma properties. To that end, the Bifrost code is used, which has advanced modules for the equation of state of the plasma, photospheric and chromospheric radiation transfer, heat conduction, and optically thin radiative cooling. We carry out a 2.5D experiment of the emergence of magnetized plasma through (meso) granular convection cells and the low atmosphere to the corona. Through detailed Lagrange tracing we study the formation and evolution of the cool ejection and, in particular, the role of the entropy sources; this allows us to discern families of evolutionary patterns for the plasma elements. In the launch phase, many elements suffer accelerations well in excess of gravity; when nearing the apex of their individual trajectories, instead, the plasma elements follow quasi-parabolic trajectories with accelerations close to g{sub ⊙}. We show how the formation of the cool ejection is mediated by a wedge-like structure composed of two shocks, one of which leads to the detachment of the surge from the original emerged plasma dome.

79 ASTRONOMY AND ASTROPHYSICS↗

Braking of tearing mode rotation by ferromagnetic conducting walls in tokamaks

An in-depth investigation of the braking of tearing mode rotation in tokamak plasmas via eddy currents induced in external ferromagnetic conducting structures is performed. In general, there is a “forbidden band” of tearing mode rotation frequencies that separates a branch of high-frequency solutions from a branch of low-frequency solutions. When a high-frequency solution crosses the upper boundary of the forbidden band, there is a bifurcation to a low-frequency solution, and vice versa. The bifurcation thresholds predicted by simple torque-balance theory (which takes into account the electromagnetic braking torque acting on the plasma, as well as the plasma viscous restoring torque, but neglects plasma inertia) are found to be essentially the same as those predicted by more complicated time-dependent mode braking theory (which takes inertia into account). Significant ferromagnetism causes otherwise electromagnetically thin conducting structures to become electromagnetically thick and also markedly decreases the critical tearing mode amplitude above which the mode “locks” to the conducting structures (i.e., the high-frequency to low-frequency bifurcation is triggered). On the other hand, if the ferromagnetism becomes too large, then the forbidden band of mode rotation frequencies is suppressed, and the mode frequency consequently varies smoothly and reversibly with the mode amplitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Key results from the first plasma operation phase and outlook for future performance in Wendelstein 7-X

The first physics operation phase on the stellarator experiment Wendelstein 7-X was successfully completed in March 2016 after about 10 weeks of operation. Experiments in this phase were conducted with five graphite limiters as the primary plasma-facing components. Overall, the results were beyond the expectations published shortly before the start of operation [Sunn Pedersen et al., Nucl. Fusion 55, 126001 (2015)] both with respect to parameters reached and with respect to physics themes addressed. We report here on some of the most important plasma experiments that were conducted. The importance of electric fields on global confinement will be discussed, and the obtained results will be compared and contrasted with results from other devices, quantified in terms of the fusion triple product. Expected values for the triple product in future operation phases will also be described and put into a broader fusion perspective.

Physics↗

Petschek reconnection with a nonlocalized resistivity

The impact of using a nonlocalized electrical resistivity having a spatially asymmetric profile is considered on two-dimensional steady-state magnetic reconnection. Starting from an initial Harris current sheet, time-dependent magnetohydrodynamic simulations are carried out over an entire spatial domain without any symmetry assumptions. It is shown that a stationary Petschek-like reconnection is obtained in the half-plane where a uniform resistivity is adopted. The latter configuration is maintained by a coexisting Petschek configuration that is formed in the second half-plane where the resistivity exhibits a classical exponentially decreasing variation. The structure of the central diffusion region is asymmetric, with a stagnation point flow which does not coincide with the X-point. These results suggest conditions under which a Petschek solution can indeed exist in the presence of a small uniform resistivity in the whole domain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of Penning ionization in the enhancement of streamer channel conductivity and Ar(1s{sub 5}) production in a He-Ar plasma jet

Plasma jet devices that use a helium gas flow mixed with a small percentage of argon have been shown to operate with a larger discharge current and enhanced production of the Ar(1s{sub 5}) metastable state, particularly in the discharge afterglow. In this experiment, time-resolved quantitative measurements of He(2{sup 3}S{sub 1}) and Ar(1s{sub 5}) metastable species were combined with current and spectrally resolved emission measurements to elucidate the role of Penning ionization in a helium plasma jet with a variable argon admixture. The plasma jet was enclosed in a glass chamber through which a flowing nitrogen background was maintained at 600 Torr. At 3%-5% Ar admixture, we observed a {approx}50% increase in the peak circuit current and streamer velocity relative to a pure helium plasma jet for the same applied voltage. The streamer initiation delay also decreased by {approx}20%. Penning ionization of ground-state argon was found to be the dominant quenching pathway for He(2{sup 3}S{sub 1}) up to 2% Ar and was directly correlated with a sharp increase in both the circuit current and afterglow production of Ar(1s{sub 5}) for Ar admixtures up to 1%, but not necessarily with the streamer velocity, which increased more gradually with Ar concentration. Ar(1s{sub 5}) was produced in the afterglow through recombination of Ar{sup +} and dissociative recombination of Ar{sub 2}{sup +} as the local mean electron energy decreased in the plasma channel behind the streamer head. The discharge current and argon metastable enhancement are contingent on the rapid production of He(2{sup 3}S{sub 1}) near the streamer head, >5 Multiplication-Sign 10{sup 12} cm{sup -3} in 30 ns under the conditions of this experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SOLAR MOSS PATTERNS: HEATING OF CORONAL LOOPS BY TURBULENCE AND MAGNETIC CONNECTION TO THE FOOTPOINTS

We address the origin of the patchy dark and bright emission structure, known as 'moss', observed by TRACE extreme ultraviolet observations of the solar disk. Here we propose an explanation based on turbulent, patchy heat conduction from the corona into the transition region. Computer simulations demonstrate that magnetic turbulence in coronal loops develops a flux rope structure with current sheets near the flux rope boundaries. Localized heating due to current sheet activity such as magnetic reconnection is followed by heat conduction along turbulent magnetic field lines. The field line trajectories tend to remain near the flux rope boundaries, resulting in selective heating of the plasma in the transition region. This can explain the network of bright regions in the observed moss morphology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laboratory simulation of the electrodynamic interactions of a tethered satellite with an ionospheric plasma

An improved experimental set-up in the Orleans Plasma Chamber allowed investigations of the I-V characteristics of a conductive spherical body (10 cm diameter) in a plasma environment. Moreover, the influence of a transversal magnetic field at 0.6 and 1.2 G was investigated, for the first time, both on the sheath potential profile and current collection. Floating potential profiles were measured at 16 different radial distances from the test body up to 9 body radii in 8 different angular positions. The test body potential could be increased in the range from -200 V up to +100 V. Preliminary results are shown and discussed.

Bonifazi, C.↗