SEARCH · Engineering Papers

Results for “Normalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Bayesian estimation of normal mixture parameters

A Bayesian, or penalized maximum likelihood, approach to the problem of estimating the parameters of a mixture of multivariate normal distributions is proposed. The Bayesian formulation eliminates the problem of singularities in the likelihood function and results in an attractive EM-like procedure. Although the question of consistency is not settled, it is suggested that the proposed method has certain advantages over both the constrained and unconstrained maximum likelihood procedures.

Peters, C.↗

NASA NTRS1984

Explanation of the Normal Winter Anomaly from the Seasonal Variation of Short Wave Absorption

The frequency dependence of the winter anomaly (WA) of radio wave absorption indicates the altitude range where the considered seasonal variation of absorption, L, takes place: 75-95 km. In this height region considerable seasonal variations of ionic composition and effective recombination coefficient, alpha sub e, exist, which can cause seasonal variations of electron concentration, N, and absorption, L. An attempt to render a qualitative estimation of the normal WA, i.e., the increased ratio of winter over summer absorption, L sub w/L sub s, at medium latitudes 40 deg and 50 deg, for solar zenith angles CHi = 60 deg and 75 deg is made. This is compared with existing experimental data.

Velinov, P. J.↗

NASA NTRS1985

High-Latitude Filtering in a Global Grid-Point Model Using Model Normal Modes

The aim of high-latitude filtering in the vicinity of the poles is to avoid the excessively short time steps imposed on an explicit time-differencing scheme by linear stability due to fast moving inertia-gravity waves near the poles. The model normal mode expansion toward the problem of high-latitude filtering in a global shallow water model using the same philosophy as that used by Daley for the problem for large timesteps in P.E. models with explicit time integration schemes was applied.

Takacs, L. L.↗

NASA NTRS1985

A Comparison of the Bounded Derivative and the Normal Mode Initialization Methods Using Real Data

Browning et al. (1980) proposed an initialization method called the bounded derivative method (BDI). They used analytical data to test the new method. Kasahara (1982) theoretically demonstrated the equivalence between BDI and the well known nonlinear normal mode initialization method (NMI). The purposes of this study are the extension of the application of BDI to real data and comparison with NMI. The unbalanced initial state (UBD) is data of January, 1979 OOZ which were interpolated from the adjacent sigma levels of the GLAS GCM to the 300 mb surface. The global barotropic model described by Takacs and Balgovind (1983) is used. Orographic forcing is explicitly included in the model. Many comparisons are performed between various quantities. However, we only present a comparison of the time evolution at two grid points A(50 S, 90 E) and B(10 S, 20 E) which represent low and middle latitude locations. To facilitate a more complete comparison an initialization experiment based on the classical balance equation (CBE) was also included.

Semazzi, F. H. M.↗

NASA NTRS1985

Normal modes in an overmoded circular waveguide coated with lossy material

The normal modes in an overmoded waveguide coated with a lossy material are analyzed, particularly for their attenuation properties as a function of coating material, layer thickness, and frequency. When the coating material is not too lossy, the low-order modes are highly attenuated even with a thin layer of coating. This coated guide serves as a mode suppressor of the low-order modes, which can be particularly useful for reducing the radar cross section (RCS) of a cavity structure such as a jet inlet. When the coating material is very lossy, low-order modes fall into two distinct groups: highly and lowly attenuated modes. However, as a/lambda (a = radius of the cylinder; lambda = the free-space wavelength) increases, the separation between these two groups becomes less distinctive. The attenuation constants of most of the low-order modes become small, and decrease as a function of lambda sup 2/a sup 3.

Lee, C. S.↗

NASA NTRS1984

Spherical microglass particle impingement studies of thermoplastic materials at normal incidence

Light optical and scanning electron microscope studies were conducted to characterize the erosion resistance of polymethyl methacrylate (PMMA), polycarbonate (PC), polytetrafluoroethylene (PTFE) and ultra-high-molecular-weight-polyethylene (UHMWPE). Erosion was caused by a jet of spherical micro-glass beads at normal impact. During the initial stages of damage, the surfaces of these materials were studied using a profilometer. Material buildup above the original surface was observed on PC and PMMA. As erosion progressed, this buildup disappeared as the pit became deeper. Little or no buildup was observed on PTFE and on UHMWPE. UHMWPE and PTFE are the most resistant materials and PMMA the least. Favorable properties for high erosion resistance seem to be high values of ultimate elongation, and strain energy and a low value of the modulus of elasticity. Erosion-rate-versus-time curves of PC and PTFE exhibit incubation, acceleration and steady state periods. A continuously increasing erosion rate period was observed however for PMMA instead of a steady state period. At early stages of damage and at low impact pressure material removal mechanisms appear to be similar to those for metallic materials.

Veerabhadra Rao, P.↗

NASA NTRS1984

Jovian decametric arcs - An estimate of the required wave normal angles from three-dimensional ray tracing.

Three-dimensional ray tracing is applied to an analysis of variable radio wave normal angle effects on the associated decametric (DAM) arc structures in the Jovian magnetosphere. The analysis is bed on 1-40 MHz radio signature recorded during Voyage 1 and 2 passages. The frequencies considered are above the R-X cut-off, and several ratios of the emission frequency/source frequency. The ray tracing code is based on a cold plasma formula and integration of the Hasselgrove (1955) equations. It is assumed that the emission is in the R-X mode, the source lies at the foot of an Io flux tube, and the emission cone is hollow. Attention is focused on data for two intense, vertex-late, high curvature DAM arc. A possible source for the arcs is found to be doppler-shifted gyroemission from a beam of electrons with an energy of 10 keV. A value of 1.1 is set as the limit of the doppler shift of the DAM emissions.

Menietti, J. D.↗

NASA NTRS1985

An experimental investigation of blade-vortex interaction at normal incidence

An experimental investigation has been conducted for the blade-vortex interaction (BVI) of a rotor at normal incidence, where the vortex is generally parallel to the rotor axis. Tip Mach number, radial BVI station, and free stream velocity were varied during measurements of fluctuating blade pressures, far field sound pressure levels and directivity, incident vortex velocity field, and blade-vortex interaction angles. The experimental setup is representative of the chopping of helicopter main rotor tip vortices by the tail rotor. This interaction is found to generate impulsive noise which radiates primarily ahead of the blade.

Ahmadi, A. R.↗

NASA NTRS1984

Solar corona studies using normal-incidence X-ray optics

The progress which has been made in constructing a new type of X-ray telescope, which operates at normal incidence in the soft X-ray region by the use of multilayer coatings is described. The principles involved in state-of-the-art multilayer technology and some high-resolution imaging results are discussed. A rocket payload incorporating a multilayer X-ray mirror is presently being constructed. It is of Ritchey-Chretien design and the expected spatial resolution is 1/4 arcsec. The scientific program for solar-coronal studies and future instrumental developments are also discussed.

Golub, L.↗

NASA NTRS1984

Heat transfer investigation in the junction region of circular cylinder normal to a flat plate at 90 deg location

External heat-transfer rates were measured on a flat plate in the junction region of a circular cylinder mounted normal to the plate at a location 90 deg from the stagnation point. This configuration simulates the junction of the shroud with gas-turbine vanes. Heat-transfer results are presented for laminar, transition, and turbulent boundary layers for a Mach number of 0.14 with gas temperatures of approximately 750 deg R over a flat plate at room temperature. The measurements were made in air for a unit Reynolds number, Re/cm, range of 11,000 to 58,000. Heat-transfer measurements were conducted in the 70-ft long, 4-in. diameter shock tube. A shock-wave reflection technique was used to produce a flow Mach number of 0.14. Thin-film platinum heat gages were mounted on the flat plate and along the line of the stagnation point of the cylinder to measure the local heat flux in the junction region. The experimental heat-transfer data were correlated with the laminar and turbulent boundary-layer theories for the flat plate. With the cylinder the heat fluxes on the flat plate were greatly increased in the junction region compared to the heat flux for the plate alone.

Nagamatsu, H. T.↗

NASA NTRS1984

Combined distillation and normal freezing to purify elements of groups II and VI

A practical system and its application to the purification of Te and Cd is described. Single crystals are grown directly in vitreous silica ampoules subsequently used for sealed Bridgman growth of (Hg-Cd)Te. The system also prepares the ampoules by heating in high vacuum. Purification of the elements is by the combined effect of distillation and normal freezing. Transport and segregation are discussed.

Holland, L. R.↗

NASA NTRS1985

High-speed photometry of Z Chamaeleontis covering the 1983 March normal outburst

High-speed photometry over a three-week period covering the Mar. 13, 1983 normal outburst of Z Cha is presented. Multicolor observations revealed significant reddening during eclipse in both the quiescent and outburst states. Quiescent primary eclipse timings remained consistent with an increasing orbital period. Hotspot eclipse timings revealed that the accretion disk had physically expanded in radius after the outburst. The duration of the eclipse during outburst, however, limited the optical emission to a region bounded by the radius of the preoutburst accretion disk. In the final stages of decline this emission region had shrunk in size by a factor of approximately 4. The postoutburst observations showed the hotspot eclipse to be less stable in structure compared to before the outburst.

Cook, M. C.↗

NASA NTRS1985

Neurophysiological model of the normal and abnormal human pupil

Anatomical, experimental, and computer simulation studies were used to determine the structure of the neurophysiological model of the pupil size control system. The computer simulation of this model demonstrates the role played by each of the elements in the neurological pathways influencing the size of the pupil. Simulations of the effect of drugs and common abnormalities in the system help to illustrate the workings of the pathways and processes involved. The simulation program allows the user to select pupil condition (normal or an abnormality), specific site along the neurological pathway (retina, hypothalamus, etc.) drug class input (barbiturate, narcotic, etc.), stimulus/response mode, display mode, stimulus type and input waveform, stimulus or background intensity and frequency, the input and output conditions, and the response at the neuroanatomical site. The model can be used as a teaching aid or as a tool for testing hypotheses regarding the system.

Krenz, W.↗

NASA NTRS1985

A statistical analysis of the Einstein normal galaxy sample. I - Spiral and irregular galaxies

The results of a statistical analysis of 48 spiral and irregular galaxies observed with the Einstein Observatory are reported. It is found that the X-ray luminosity is not directly correlated with the mass of the galaxies, but is strongly correlated with the blue luminosity. This suggests that most X-ray sources, including low-mass binaries, are binary systems belonging to both old disk and young arm Population I components. A real bulge population of X-ray sources exists that can contribute significantly to the X-ray luminosity of early-type spirals. The X-ray emission from a sample of 29 relatively isolated, normal elliptical and S0 galaxies is also studied, and the results are compared to those for the above sample to investigate the origin of the X-ray emission in early-type galaxies and the possible emission mechanisms. The influence of a powerful radio source and the onset of nuclear activity are also examined.

Fabbiano, G.↗

NASA NTRS1985

Angular particle impingement studies of thermoplastic materials at normal incidence

Scanning electron microscope studies were conducted to characterize the erosion resistance of polymethyl methacrylate (PMMA), polycarbonate (PC), polytetrafluorethylene (PTFE), and ultra-high-molecular-weight polyethylene (UHMWPE). Erosion was caused by a jet of angular microparticles of crushed glass at normal incidence. Material built up above the original surface on all of the materials. As erosion progressed, this buildup disappeared. UHMWPE was the most resistant material and PMMA the least. The most favorable properties for high erosion resistance were high values of ultimate elongation, maximum service temperature, and strain energy and a low value of the modulus of elasticity. Erosion-rate-versus-time curves of PC and PTFE exhibited incubation, acceleration, and steady-state periods. PMMA also exhibited a deceleration period, and an incubation period with deposition was observed for UHMWPE.

Rao, P. V.↗

NASA NTRS1985

Multitemporal dimensionality of images of normalized difference vegetation index at continental scales

Two sets of multitemporal data derived from NOAA world data product are analyzed by means of principal components analysis in order to examine their underlying multitemporal dimensionality. Specifically, images of the normalized difference vegetation index (NDVI) were analyzed for eight 3-week periods for Africa and ten 3-week periods for North America sampled from throughout the year extending from April 1982 to March 1983. The two multitemporal sets of images displayed remarkable similarities in terms of their first two components, the first corresponding very closely to the annualized integrated NDVI and the second to the seasonality of the NDVI. In particular, for the African data set the feature space defined by the first two components allows separation of the main cover types.

Townshend, J. R. G.↗

NASA NTRS1985

A normal stress criterion for crack extension direction in orthotropic composite materials

A criterion for predicting the direction of crack extension in orthotropic composite materials is presented. The criterion is based upon the normal stress and the anisotropic tensile strength on arbitrary planes about the tip of a crack. Results are obtained, via finite element solutions, for: (1) isotropic mixed mode fracture, (2) cracks in unidirectional off-axis slotted composite tensile coupons and (3) cracks in cross plied laminates. Comparisons are made with other theories and experimental results.

Buczek, M. B.↗

NASA NTRS1985

A spectral haze diagnostic feature for normalizing Landsat Thematic Mapper data

The effects of atmospheric haze on Thematic Mapper data, transformed to TM Tasseled Cap features, are illustrated by means of simulation. A spectral feature by which the amount of atmospheric haze may be inferred is derived and described for both simulated and actual TM data. Results presented for two actual TM scenes illustrate the diagnostic feature's sensitivity to changes in haze level as well as its insensitivity to scene-class-related variability. The method by which such a diagnostic feature might be incorporated into a haze normalization procedure is also discussed.

Crist, E. P.↗