Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Polymer/metal hybrid multilayers modified Schottky devices

Insulating, polymethylmethacrylate (PMMA), and semiconducting, poly(3-hexylthiophene) (P3HT), nanometer thick polymers/Au nanoparticles based hybrid multilayers (HyMLs) were fabricated on p-Si single-crystal substrate. An iterative method, which involves, respectively, spin-coating (PMMA and P3HT deposition) and sputtering (Au nanoparticles deposition) techniques to prepare Au/HyMLs/p-Si Schottky device, was used. The barrier height and the ideality factor of the Au/HyMLs/p-Si Schottky devices were investigated by current-voltage measurements in the thickness range of 1–5 bilayers. It was observed that the barrier height of such hybrid layered systems can be tuned as a function of bilayers number and its evolution was quantified and analyzed.

36 MATERIALS SCIENCE↗

Periodically multilayered planar optical concentrator for photovoltaic solar cells

A planar optical concentrator comprising a periodic multilayered isotropic dielectric material backed by a metallic surface-relief grating was theoretically examined for silicon photovoltaics. The concentrator was optimized using a differential evolution algorithm for solar-spectrum-integrated power-flux density. Further optimization was carried out for tolerance to variations in the incidence angle, spatial dimensions, and dielectric properties. The average electron-hole pair density in a silicon solar cell can be doubled, and the material costs substantially diminished by this concentrator, whose efficacy is due to the excitation of waveguide modes and multiple surface-plasmon-polariton waves in a broad spectral regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure of multilayered Cr(Al)N/SiO{sub x} nanocomposite coatings fabricated by differential pumping co-sputtering

A Cr(Al)N/38 vol. % SiO{sub x} hard coating was prepared on a (001) Si substrate at 250 °C in a differential pumping co-sputtering system, which has two chambers for radio frequency (RF) sputtering and a substrate holder rotating on the chambers. The composite coating was grown by alternate sputter-depositions from CrAl and SiO{sub 2} targets with flows of N{sub 2}+Ar and Ar at RF powers of 200 and 75 W, respectively, on transition layers grown on the substrate. Analytical electron microscopy reveled that the Cr(Al)N/SiO{sub x} coating had a multilayered structure of Cr(Al)N crystal layers ∼1.6 nm thick and two-dimensionally dispersed amorphous silicon oxide (a-SiO{sub x}) particles with sizes of ∼1 nm or less. The a-SiO{sub x} particles were enclosed with the Cr(Al)N layers. The coating had a low indentation hardness of ∼25 GPa at room temperature, due to a high oxide fraction of 38 vol. % and a low substrate rotational speed of 1 rpm. Faster rotation and lower oxide fraction would make a-SiO{sub x} particles smaller, resulting in the formation of Cr(Al)N crystal including the very fine a-SiO{sub x} particles with small number density. They would work as obstacles for the lattice deformation of the Cr(Al)N crystals. We have fabricated a superhard coating of Cr(Al)N/17 vol. % SiO{sub x} with a hardness of 46 GPa prepared at 12 rpm.

36 MATERIALS SCIENCE↗

Self-organization during growth of ZrN/SiN{sub x} multilayers by epitaxial lateral overgrowth

ZrN/SiN{sub x} nanoscale multilayers were deposited on ZrN seed layers grown on top of MgO(001) substrates by dc magnetron sputtering with a constant ZrN thickness of 40 Å and with an intended SiN{sub x} thickness of 2, 4, 6, 8, and 15 Å at a substrate temperature of 800 °C and 6 Å at 500 °C. The films were investigated by X-ray diffraction, high-resolution scanning transmission electron microscopy, and energy dispersive X-ray spectroscopy. The investigations show that the SiN{sub x} is amorphous and that the ZrN layers are crystalline. Growth of epitaxial cubic SiN{sub x}—known to take place on TiN(001)—on ZrN(001) is excluded to the monolayer resolution of this study. During the course of SiN{sub x} deposition, the material segregates to form surface precipitates in discontinuous layers for SiN{sub x} thicknesses ≤6 Å that coalesce into continuous layers for 8 and 15 Å thickness at 800 °C, and for 6 Å at 500 °C. The SiN{sub x} precipitates are aligned vertically. The ZrN layers in turn grow by epitaxial lateral overgrowth on the discontinuous SiN{sub x} in samples deposited at 800 °C with up to 6 Å thick SiN{sub x} layers. Effectively a self-organized nanostructure can be grown consisting of strings of 1–3 nm large SiN{sub x} precipitates along apparent column boundaries in the epitaxial ZrN.

36 MATERIALS SCIENCE↗

Quantum Hall effect in graphene decorated with disordered multilayer patches

Quantum Hall effect (QHE) is observed in graphene grown by chemical vapour deposition using platinum catalyst. The QHE is even seen in samples which are irregularly decorated with disordered multilayer graphene patches and have very low mobility (<500 cm{sup 2}V{sup −1}s{sup −1}). The effect does not seem to depend on electronic mobility and uniformity of the resulting material, which indicates the robustness of QHE in graphene.

36 MATERIALS SCIENCE↗

Structural, optical and magnetic properties of ZnOFe/ZnO multilayers

ZnOFe/ZnO multilayers (MLs) with the constant composition and the different thickness in ZnOFe layers have been prepared by helicon plasma sputtering. The XRD patterns of ZnOFe/ZnO MLs before annealing showed only ZnO diffraction peaks while one after annealing indicated the phases of ZnO and ZnFe{sub 2}O{sub 4}. The magnetization curves of ZnOFe/ZnO MLs before and after annealing showed ferromagnetic behavior. The origin of ferromagnetism in ZnOFe/ZnO MLs before annealing is considered to be due to the formation of defects/vacancies resulting from the substitution of Fe{sup 3+} ions for Zn{sub 2+} ions in ZnOFe layers irrespective of the mixed Fe valence states seen in XANES spectra. The ferromagnetic behavior after annealing is due to the formation of ZnFe{sub 2}O{sub 4}, which was confirmed by XRD, XPS, RBS measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transformations, heat evolution, and atomic diffusion during slow heating of Al-rich Al/Zr multilayered foils

We describe the energy and sequence of phase transformations in multilayered Al/Zr foils with atomic ratios of 3 Al:1 Zr during low temperature (<350 °C) heat treatments in a differential scanning calorimeter. The initial phase formed is an Al-rich amorphous phase that appears to grow by Zr diffusion through the amorphous phase. The subsequent nucleation and growth of tetragonal Al{sub 3}Zr along the Al/amorphous layer interface is mediated by Al diffusion through the crystalline intermetallic phase. Diffusion coefficients associated with these processes are higher than expected from reports of diffusivities measured at higher temperatures. The inferred heat of formation of the tetragonal Al{sub 3}Zr phase is 1240 ± 40 J/g (53 ± 2 kJ/mol atom). No anomalous variation in the energy or sequence of phase transformations is found with bilayer thickness for samples with bilayer thickness in the range of 17 nm to 90 nm despite anomalies in the bilayer dependence of self-propagating reaction velocities in the same foils.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly uniform bipolar resistive switching characteristics in TiO{sub 2}/BaTiO{sub 3}/TiO{sub 2} multilayer

Nanoscale multilayer structure TiO{sub 2}/BaTiO{sub 3}/TiO{sub 2} has been fabricated on Pt/Ti/SiO{sub 2}/Si substrate by chemical solution deposition method. Highly uniform bipolar resistive switching (BRS) characteristics have been observed in Pt/TiO{sub 2}/BaTiO{sub 3}/TiO{sub 2}/Pt cells. Analysis of the current-voltage relationship demonstrates that the space-charge-limited current conduction controlled by the localized oxygen vacancies should be important to the resistive switching behavior. X-ray photoelectron spectroscopy results indicated that oxygen vacancies in TiO{sub 2} play a crucial role in the resistive switching phenomenon and the introduced TiO{sub 2}/BaTiO{sub 3} interfaces result in the high uniformity of bipolar resistive switching characteristics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of graphite oxide solution concentration on the properties of multilayer graphene

This paper reports the influence of graphite oxide (GO) solution concentration on the optical and electrical properties of multilayer graphene (MLG) films. Graphene oxide (GrO) films were deposited on the glass substrates by spin coating aqueous solutions of GO with different concentrations (7, 8, 9, 10 and 11 mg/ml). The GrO films were then thermally reduced at temperature of 500°C in argon flow for half an hour to form MLG films. Both the transmittance and sheet resistance decreased with the GO concentration from 8 mg/ml to 9 mg/ml, possibly due to thicker and uniform coverage of MLG over the substrate. However, the transmittance and sheet resistance increased rapidly as the GO concentration reached 11 mg/ml, which can be attributed to poor film quality. The MLG film obtained at concentration of 10 mg/ml showed the highest transmittance/sheet resistance ratio with 69 % transmittance and sheet resistance of 292 ± 63 kΩ/sq. The optimum MLG film was utilized as counter electrode in dye sensitized solar cells based on ZnO nanorods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electric field induced modification of magnetic properties in Co{sub 2}Si{sub 2} multilayers

Effects of an external electric field on the magnetization and magnetocrystalline anisotropy (MA) in Co{sub 2}Si{sub 2} multilayers are investigated by first-principles calculations. The results demonstrate that, due to the hybridization between the Si-2p orbitals and the Co-3d orbitals, the magnetic moment of the Co{sub 2}Si{sub 2} supercell changes non-linearly with external electric field and the behavior of band structures near the Fermi energy could be explained within near-rigid-band model. Moreover, spin-polarized charge redistribution leads to spin reorientation and the MA is not proportional to the orbital moment anisotropy under the external electric field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependence of ion-beam mixing in crystalline and amorphous germanium isotope multilayer structures

Self-atom mixing induced by 310 keV gallium (Ga) ion implantation in crystalline and preamorphized germanium (Ge) at temperatures between 164 K and 623 K and a dose of 1 × 10{sup 15} cm{sup −2} is investigated using isotopic multilayer structures of alternating {sup 70}Ge and {sup nat}Ge layers grown by molecular beam epitaxy. The distribution of the implanted Ga atoms and the ion-beam induced depth-dependent self-atom mixing was determined by means of secondary ion mass spectrometry. Three different temperature regimes of self-atom mixing, i.e., low-, intermediate-, and high-temperature regimes are observed. At temperatures up to 423 K, the mixing is independent of the initial structure, whereas at 523 K, the intermixing of the preamorphized Ge structure is about twice as high as that of crystalline Ge. At 623 K, the intermixing of the initially amorphous Ge structure is strongly reduced and approaches the mixing of the crystalline material. The temperature dependence of ion-beam mixing is described by competitive amorphization and recrystallization processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermally stable perpendicular magnetic anisotropy features of [Co/Pd]{sub m} multilayer matrix integrated with [CoO/Pd]{sub n} bottom layer

We evaluated the perpendicular magnetic anisotropy (PMA) features of a hybrid [CoO/Pd]{sub 2}/[Co/Pd]{sub 7} multilayer (ML) matrix under annealing in which the [CoO/Pd]{sub 2} bottom layer was inserted. Annealing allowed for the diffusion of oxygen atoms existing in the inserted [CoO/Pd]{sub 2} layer, leading to an atomic structural reconfiguration event. The hybrid matrix was crucial to result in a higher effective anisotropy energy (3.40 Merg/cc) than an ordinary [Co/Pd]{sub 7} ML matrix (1.25 Merg/cc) under annealing at 450 °C. X-ray photoelectron spectroscopy confirmed the presence of Co-O bonding states and annealing dependent oxygen atom diffusion. The possible nature of the enhanced PMA features is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopic ellipsometry of homoepitaxial diamond multilayers and delta-doped structures

The optimization of diamond-based unipolar electronic devices such as pseudo-vertical Schottky diodes or delta-doped field effect transistors relies in part on the sequential growth of nominally undoped (p{sup –}) and heavily boron doped (p{sup ++}) layers with well-controlled thicknesses and steep interfaces. Optical ellipsometry offers a swift and contactless method to characterize the thickness, roughness, and electronic properties of semiconducting and metallic diamond layers. We report ellipsometric studies carried out on delta-doped structures and other epitaxial multilayers with various boron concentrations and thicknesses (down to the nanometer range). The results are compared with Secondary Ion Mass Spectroscopy and transport measurements.

36 MATERIALS SCIENCE↗

Tuning extreme ultraviolet emission for optimum coupling with multilayer mirrors for future lithography through control of ionic charge states

We report on the identification of the optimum plasma conditions for a laser-produced plasma source for efficient coupling with multilayer mirrors at 6.x nm for beyond extreme ultraviolet lithography. A small shift to lower energies of the peak emission for Nd:YAG laser-produced gadolinium plasmas was observed with increasing laser power density. Charge-defined emission spectra were observed in electron beam ion trap (EBIT) studies and the charge states responsible identified by use of the flexible atomic code (FAC). The EBIT spectra displayed a larger systematic shift of the peak wavelength of intense emission at 6.x nm to longer wavelengths with increasing ionic charge. This combination of spectra enabled the key ion stage to be confirmed as Gd{sup 18+}, over a range of laser power densities, with contributions from Gd{sup 17+} and Gd{sup 19+} responsible for the slight shift to longer wavelengths in the laser-plasma spectra. The FAC calculation also identified the origin of observed out-of-band emission and the charge states responsible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Elastic strains at interfaces in InAs/AlSb multilayer structures for quantum cascade lasers

InAs/AlSb multilayers similar to those used in quantum cascade lasers have been grown by molecular beam epitaxy on (001) InAs substrates. Elastic strain is investigated by high resolution transmission electron microscopy. Thin interfacial regions with lattice distortions significantly different from the strain of the AlSb layers themselves are revealed from the geometrical phase analysis. Strain profiles are qualitatively compared to the chemical contrast of high angle annular dark field images obtained by scanning transmission electron microscopy. The strain and chemical profiles are correlated with the growth sequences used to form the interfaces. Tensile strained AlAs-like interfaces tend to form predominantly due to the high thermal stability of AlAs. Strongly asymmetric interfaces, AlAs-rich and (Al, In)Sb, respectively, can also be achieved by using appropriate growth sequences.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Seed influence on the ferromagnetic resonance response of Co/Ni multilayers

The effect of Pd and Ru seed layers on the magnetic properties of [Co/Ni]{sub N} multilayers with varying number of bilayer repeats N is investigated using vector network analyzer ferromagnetic resonance. The effective anisotropy field H{sub Keff} is found to increase with N for Ru seed, but decreases for Pd until N = 15. As N is increased beyond 15, H{sub Keff} decreases for both seeds. In contrast, the damping parameter α decreases with N regardless of the seed, showing a 1/N dependence. Taking spin pumping into account, the intrinsic damping α{sub 0} for both Pd and Ru seeds reduce to α{sub 0} ≈ 0.01. These results demonstrate that there can be a strong influence of the seed/Co interface on anisotropy, especially for sufficiently low N, but not necessarily on α{sub 0}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sign change of exchange bias in [Pt/Co]{sub 3}/IrMn multilayer

The properties of exchange bias in a multilayer of [Pt(1.0 nm)/Co(1.0 nm)]{sub 2}/Pt(t{sub Pt} nm)/Co(1.0 nm)/ IrMn(12.0 nm) were investigated with a variation of Pt layer thickness, t{sub Pt}. For t{sub Pt} ≤ 1.6 nm, it was typically observed that Co layers were ferromagnetically coupled while IrMn layer exhibited negative exchange bias. With increasing Pt thickness, antiferromagnetic (AF) interlayer coupling strength increased and caused AF spin configuration between the Co layers. With further increasing of Pt thickness (t{sub Pt} = 2.5 nm), the exchange bias between Co and IrMn layers was changed from negative to positive. Therefore, a large enhancement of AF interlayer coupling induced the sign change of exchange bias from negative to positive and resulted in a drastic change of switching behavior in a magnetization reversal. Both extraordinary Hall-effect and magnetoresistance were measured to verify the exchange bias direction and spin configurations upon magnetization reversal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High precision laser induced etching of multilayered MoS{sub 2}

We demonstrate a method for reducing the thickness of multilayered MoS{sub 2} to few and single layers by irradiation with a 532 nm wavelength laser spot. The morphology and optical properites of the etched MoS{sub 2} were were measured by atomic force microscopy (AFM) and Raman spectroscopy before and after laser etching. Our laser etching method is a simple and highly effective tool for the fabrication of single, and few layered MoS{sub 2} for atomic scale optical and electronic device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗