Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model interpretation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Applications of a Rayleigh-Taylor model to direct-drive laser fusion

Here, this paper presents a simple physics-based model for the interpretation of key metrics in laser direct drive. The only input parameters required are target scale, in-flight aspect ratio, and beam-to-target radius, and the importance of each has been quantified with a tailored set of cryogenic implosion experiments. These analyses lead to compact and accurate predictions of the fusion yield and areal density as a function of hydrodynamic stability, and suggest new ways to take advantage of direct drive. To provide examples, we will discuss how the inferred mix width behaves relative to theory, then show how it could be exploited to perform a direct drive implosion with a Lawson metric or Χ no α of 0.24 ± 0.02—using a novel parameter space at high velocities and beam radii on the OMEGA laser—that projects to ignition at a laser energy ≤2.0 MJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mullins effect in a filled elastomer under uniaxial tension

Modulus softening and permanent set in filled polymeric materials due to cyclic loading and unloading, commonly known as the Mullins effect, can have a significant impact on their use as support cushions. The quantitative analysis of such behavior is essential to ensure the effectiveness of such materials in long-term deployment. In this work we combine existing ideas of filler-induced modulus enhancement, strain amplification, and irreversible deformation within a simple non-Gaussian constitutive model to quantitatively interpret recent measurements on a relevant PDMS-based elastomeric cushion. Also, we find that the experimental stress-strain data is consistent with the picture that during stretching (loading) two effects take place simultaneously: (1) the physical constraints (entanglements) initially present in the polymer network get disentangled, thus leading to a gradual decrease in the effective cross-link density, and (2) the effective filler volume fraction gradually decreases with increasing strain due to the irreversible pulling out of an initially occluded volume of the soft polymer domain.

36 MATERIALS SCIENCE↗

Fragment Intrinsic Spins and Fragments’ Relative Orbital Angular Momentum in Nuclear Fission

In this work, we present the first fully unrestricted microscopic calculations of the primary fission fragment intrinsic spins and of the fission fragments’ relative orbital angular momentum for 236 U*, 240 Pu*, and 252 Cf using the time-dependent density functional theory framework. Within this microscopic approach, free of restrictions and unchecked assumptions and which incorporates the relevant physical observables for describing fission, we evaluate the triple distribution of the fission fragment intrinsic spins and of their fission fragments’ relative orbital angular momentum and show that their dynamics is dominated by their bending collective modes in contradistinction to the predictions of the existing phenomenological models and some interpretations of experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hierarchical morphologies in co-sputter deposited thin films

Co-depositions of immiscible alloy films at specific processing conditions have yielded hierarchical microstructures which consist of distinct features at multiple length scales, often agglomerates and concentration modulations on the sub-micrometer-scale and fine nanoprecipitates in a matrix on the nanoscale. The present work examined a series of immiscible alloy systems: Cu-Mo, Cu-Ag, Cu-Fe, Cu-Ta, Mo-Ag, Cu-Mo-Ag, to determine the kinetic conditions favorable for hierarchical organization and the formation mechanism of such structures. Thin films of six immiscible systems were sputter co-deposited over a range of deposition rates from 0.12 to 2 nm/s and various temperatures from 400 to 800°C. The resulting microstructures indicate that hierarchical structures form with sufficient disparity in kinetic energy between the constituent atoms, one species being highly mobile (A) and the other relatively immobile (B). This condition arises typically at elevated deposition temperatures and reduced deposition rates but is also alloy dependent. The hierarchical structures form during deposition via phase separation and self-organization processes across the multiple length scales. The adatoms diffuse on the film surface with the highly mobile species swiftly agglomerating into A-rich domains within which B-rich nanoprecipitates form, often self-organizing into periodic arrays. The smallest B-rich nanoprecipitates in the A-rich domains are found to be coherent and in a metastable crystal structure (B taking the structure of A), but coarser precipitates that exhibit the equilibrium structure of B element. The A-rich domains are surrounded by a B-rich matrix that phase-separates into a concentration modulated structure. In conclusion, the observations are interpreted via a model incorporating material properties and process parameters.

36 MATERIALS SCIENCE↗

Spatial biases of information influence global estimates of soil respiration: how can we improve global predictions?

Soil respiration (Rs), the efflux of CO2 from soils to the atmosphere, is a major component of the terrestrial carbon cycle, but is poorly constrained from regional to global scales. The global soil respiration database (SRDB) is a compilation of in-situ Rs observations from around the globe that has been consistently updated with new measurements over the past decade. It is unclear whether the addition of data to new versions of the SRDB has produced better-constrained global Rs estimates. We compared two versions of the SRDB (v3.0 n=5173 and v5.0 n=10366) to determine how additional data influenced the global sum and uncertainty of Rs as predicted by a quantile regression forest model. A model parameterized using SRDBv3 yielded a global Rs sum of 88.6 Pg C yr-1, and associated uncertainty of 29.9 (mean absolute error) and 57.9 (standard deviation) Pg C yr-1, whereas parameterization using SRDBv5 yielded 96.5 Pg C yr-1 and associated uncertainty of 30.2 (mean average error) and 73.4 (standard deviation) Pg C yr-1. Empirically estimated global heterotrophic respiration (Rh) from v3 and v5 were 49.9-50.2 (mean 50.1) and 53.3-53.5 (mean 53.4) Pg C yr-1, respectively. Interestingly, SRDBv5’s inclusion of new data from underrepresented regions (e.g., Asia, Africa, South America) thus resulted in overall higher model uncertainty. The SRDBv5 is still biased towards northern latitudes and temperate zones, so we tested that an optimized global distribution of Rs measurements resulted in a global sum of 96.4 ± 21.4 Pg C yr-1 and lower model uncertainty. These results support current global estimates of Rs but highlight spatial inconsistencies that influence model parameterization and interpretation that should be addressed to improve regional- to global-scale predictions.

Stell, Emma↗

Linking variation in intrinsic water‐use efficiency to isohydricity: a comparison at multiple spatiotemporal scales

Summary Species‐specific responses of plant intrinsic water‐use efficiency ( iWUE ) to multiple environmental drivers associated with climate change, including soil moisture ( θ ), vapor pressure deficit ( D ), and atmospheric CO 2 concentration ( c a ), are poorly understood. We assessed how the iWUE and growth of several species of deciduous trees that span a gradient of isohydric to anisohydric water‐use strategies respond to key environmental drivers ( θ , D and c a ). iWUE was calculated for individual tree species using leaf‐level gas exchange and tree‐ring δ 13 C in wood measurements, and for the whole forest using the eddy covariance method. The iWUE of the isohydric species was generally more sensitive to environmental change than the anisohydric species was, and increased significantly with rising D during the periods of water stress. At longer timescales, the influence of c a was pronounced for isohydric tulip poplar but not for others. Trees’ physiological responses to changing environmental drivers can be interpreted differently depending on the observational scale. Care should be also taken in interpreting observed or modeled trends in iWUE that do not explicitly account for the influence of D .

Yi, Koong↗

Identification of new marker genes from plant single‐cell RNA‐seq data using interpretable machine learning methods

Summary An essential step in the analysis of single‐cell RNA sequencing data is to classify cells into specific cell types using marker genes. In this study, we have developed a machine learning pipeline called single‐cell predictive marker (SPmarker) to identify novel cell‐type marker genes in the Arabidopsis root. Unlike traditional approaches, our method uses interpretable machine learning models to select marker genes. We have demonstrated that our method can: assign cell types based on cells that were labelled using published methods; project cell types identified by trajectory analysis from one data set to other data sets; and assign cell types based on internal GFP markers. Using SPmarker, we have identified hundreds of new marker genes that were not identified before. As compared to known marker genes, the new marker genes have more orthologous genes identifiable in the corresponding rice single‐cell clusters. The new root hair marker genes also include 172 genes with orthologs expressed in root hair cells in five non‐ Arabidopsis species, which expands the number of marker genes for this cell type by 35–154%. Our results represent a new approach to identifying cell‐type marker genes from scRNA‐seq data and pave the way for cross‐species mapping of scRNA‐seq data in plants.

54 ENVIRONMENTAL SCIENCES↗

Optimizing Magnetite Nanoparticles for Mass Sensitivity in Magnetic Particle Imaging

Purpose: Magnetic particle imaging (MPI), using magnetite nanoparticles (MNPs) as tracer material, shows great promise as a platform for fast tomographic imaging. To date, the magnetic properties of MNPs used in imaging have not been optimized. As nanoparticle magnetism shows strong size dependence, we explore how varying MNP size impacts imaging performance in order to determine optimal MNP characteristics for MPI at any driving field frequency f 0 . Methods: Monodisperse MNPs of varying size were synthesized and their magnetic properties characterized. Their MPI response was measured experimentally, at an arbitrarily chosen f 0 = 250 kHz, using a custom-built MPI transceiver designed to detect the third harmonic of MNP magnetization. Results were interpreted using a model of dynamic MNP magnetization that is based on the Langevin theory of superparamagnetism and accounts for sample size distribution, and size-dependent magnetic relaxation. Results: Our experimental results show clear variation in the MPI signal intensity as a function of MNP size that is in good agreement with modeled results. A maxima in the plot of MPI signal vs. MNP size indicates there is a particular size that is optimal for the chosen frequency of 250 kHz. Conclusions: For MPI at any chosen frequency, there will exist a characteristic particle size that generates maximum signal amplitude. We illustrate this at 250 kHz with particles of 15 nm core diameter.

36 MATERIALS SCIENCE↗

The dynamics of SIV 2-LTR Circles in the Presence and Absence of CD8 + Cells

CD8 + cells play a key role in HIV/SIV infection, but their specific mechanism(s) of action in controlling the virus are unclear. 2-LTR circles are extrachromosomal products generated upon failed integration of HIV/SIV. To understand the specific effects of CD8 + cells on infected cells, we analyzed the dynamics of 2-LTR circles in SIVmac251-infected rhesus macaques (RM) treated with an integrase inhibitor (INT). Twenty RMs underwent CD8 + cell depletion, received RAL monotherapy or a combination of both. Blood, lymph nodes (LNs) and gut biopsies were routinely sampled. Plasma viral loads (pVLs) and 2-LTR circles from PBMCs and LN lymphocytes were measured with qRT-PCR. In the CD8 depletion group, an ~1 log increase in pVLs and a slow increase in PBMC 2-LTRs occurred following depletion. In the INT group, a strong decline in pVLs upon treatment initiation and no change in 2-LTR levels were observed. In the INT and CD8 + cell depletion group, a similar increase in pVLs following CD8 depletion was observed, with a modest decline following INT initiation, and 2-LTR circles significantly increased in PBMCs and LNs. Analyzing the 2-LTR data across all treatment groups with a mathematical model indicates that the data best supports an effect of CD8 + cells in killing cells prior to viral integration. Sensitivity analyses of these results confirm that effect, but also allow for additional effects, which the data does not discriminate well. Overall, we show that INT does not significantly increase the levels of 2-LTR circles. However, CD8 + cell depletion increases the 2-LTR levels, which are enhanced in the presence of an INT. CD8 + T cells play an essential role in controlling HIV and simian immunodeficiency virus (SIV) infection, but the specific mechanisms involved remain poorly understood. Due to failed viral infection, HIV and SIV can form 2-LTR extrachromosomal circles that can be quantified. We present novel data on the dynamics of these 2-LTR forms in a SIV-infected macaque model under three different treatment conditions: depletion of CD8 + cells; administration of the integrase inhibitor in a monotherapy, which favors the formation of 2-LTR circles; and combination of the two treatments. We used a new mathematical model to help interpret the data, and the results suggest that CD8 + cells exert a killing effect on infected cells prior to virus integration. These results provide new insights into the mechanisms of action of CD8 + cells in SIV infection. Here, confirmation of our results would be an important step in understanding immune control of HIV.

2-LTR circles↗

Nonmonotonic behavior of magnetoresistance, R(H) hysteresis, and low-temperature heat capacity of the BaPb{sub 0.75}Bi{sub 0.25}O{sub 3} superconductor in a magnetic field: Possible manifestations of phase separation

The transport properties (R(T) and R(H) dependences at various values of the transport current in magnetic fields up to 65 kOe) and low-temperature heat capacity in magnetic fields up to 90 kOe of the BaPb{sub 0.75}Bi{sub 0.25}O{sub 3} superconductor (T{sub C} {approx} 11.3 K) are investigated with the goal of clarifying the mechanisms determining the nonmonotonic behavior and hysteresis of its magnetoresistance R(H). The type of R(H) hysteretic dependences for BaPb{sub 0.75}Bi{sub 0.25}O{sub 3} is analogous to that observed in granular high-T{sub c} superconductors (HTSCs); however, unlike classical HTSC systems, the field width of the magnetoresistance hysteresis loop for polycrystalline BaPb{sub 0.75}Bi{sub 0.25}O{sub 3} depends on the transport current. This means that although the mechanisms responsible for the magnetoresistance hysteresis (the influence of the magnetic flux trapped in superconducting regions on the effective field in Josephson interlayers) are identical in these objects, the transport current in BaPb{sub 0.75}Bi{sub 0.25}O{sub 3} may considerably affect the diamagnetic response of the superconductor. A considerable effect of transport current on the field in which the R(H) dependences have a peak and exhibit hysterestic properties is observed. Such a behavior can be adequately interpreted using the model of the spatially inhomogeneous superconductor-insulator state proposed by Gorbatsevich et al. [JETP Lett. 52, 95 (1990)]. The nonmonotonic dependence of quantity C/T (C is the heat capacity) on the magnetic field discovered in the present study also agrees with the conclusions based on this model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonant magnetoresistance in the vicinity of a phase transition

The change in the electrical conductivity of manganite films upon microwave pumping in the magnetic resonance conditions is investigated. The temperature dependence of the effect correlates with the temperature variation of colossal magnetoresistance (CMR), passing through a maximum at the Curie point. The results are interpreted using a model that assumes a decrease in the absolute value vertical bar M vertical bar of the magnetic moment of the sample under the action of magnetoresonant saturation, which leads to an increase in resistance in accordance with the CMR mechanism. Theoretical analysis based on the Landau-Lifshitz-Bloch equation confirms the correctness of this model and ensures good agreement with experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoproduction of pion-nucleon pairs on nuclei in the {Delta}(1232)-resonance region

Data from three experiments performed at the linear accelerator in Saclay, the Tomsk synchrotron, and the MAMI accelerator in Mainz and devoted to studying single pion photoproduction on light nuclei that is accompanied by nucleon emission are analyzed. The behavior of respective experimental cross sections, which is inexplicable in the impulse approximation, is interpreted within a model where the formation of an intermediate quasibound isobar-nucleus state is followed by its decay to a final state involving a pion and a nucleon.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Temperature-dependent excitonic absorption in long-period multiple In{sub x}Ga{sub 1-x}As/GaAs quantum well structures

Temperature variations in the fundamental absorption edge of long-period In{sub x}Ga{sub 1-x}As/GaAs structures are studied for samples with different numbers of quantum wells and similar periods. The quantum wells were close in composition and width. Experimental data are interpreted in the model of exciton-polariton light transfer involving localized excitons in confined structures with a finite number of quantum wells. The experimentally observed low-temperature anomaly of the integrated absorption coefficient is attributed to reemission of resonance localized excitons along a finite chain of quantum wells, with no excitonic transfer. The radiative decay time of an exciton in a single quantum well is estimated from the experimental data. It is demonstrated that, at low temperatures, the major contribution to the width of the experimentally observed absorption line corresponding to the ground heavy-hole exciton state is made by inhomogeneous broadening of the line by the field of potential fluctuations associated with the compositional disorder of the alloy. At low temperatures, the inhomogeneous broadening is much more pronounced than the broadening governed by the true radiative and nonradiative dissipative decay.

36 MATERIALS SCIENCE↗

Challenging Practices of Algebraic Battery Life Models through Statistical Validation and Model Identification via Machine-Learning

Various modeling techniques are used to predict the capacity fade of Li-ion batteries. Algebraic reduced-order models, which are inherently interpretable and computationally fast, are ideal for use in battery controllers, technoeconomic models, and multi-objective optimizations. For Li-ion batteries with graphite anodes, solid-electrolyte-interphase (SEI) growth on the graphite surface dominates fade. This fade is often modeled using physically informed equations, such as square-root of time for predicting solvent-diffusion limited SEI growth, and Arrhenius and Tafel-like equations predicting the temperature and state-of-charge rate dependencies. In some cases, completely empirical relationships are proposed. However, statistical validation is rarely conducted to evaluate model optimality, and only a handful of possible models are usually investigated. This article demonstrates a novel procedure for automatically identifying reduced-order degradation models from millions of algorithmically generated equations via bi-level optimization and symbolic regression. Identified models are statistically validated using cross-validation, sensitivity analysis, and uncertainty quantification via bootstrapping. On a LiFePO 4 /Graphite cell calendar aging data set, automatically identified models utilizing square-root, power law, stretched exponential, and sigmoidal functions result in greater accuracy and lower uncertainty than models identified by human experts, and demonstrate that previously known physical relationships can be empirically "rediscovered" using machine learning.

25 ENERGY STORAGE↗

Are GRACE-era Terrestrial Water Trends Driven by Anthropogenic Climate Change?

To provide context for observed trends in terrestrial water storage (TWS) during GRACE (2003–2014), trends and variability in the CESM1-CAM5 Large Ensemble (LE) are examined. Motivated in part by the anomalous nature of climate variability during GRACE, the characteristics of both forced change and internal modes are quantified and their influences on observations are estimated. Trends during the GRACE era in the LE are dominated by internal variability rather than by the forced response, with TWS anomalies in much of the Americas, eastern Australia, Africa, and southwestern Eurasia largely attributable to the negative phases of the Pacific Decadal Oscillation (PDO) and Atlantic Multidecadal Oscillation (AMO). While similarities between observed trends and the model-inferred forced response also exist, it is inappropriate to attribute such trends mainly to anthropogenic forcing. For several key river basins, trends in the mean state and interannual variability and the time at which the forced response exceeds background variability are also estimated while aspects of global mean TWS, including changes in its annual amplitude and decadal trends, are quantified. The findings highlight the challenge of detecting anthropogenic climate change in temporally finite satellite datasets and underscore the benefit of utilizing models in the interpretation of the observed record.

54 ENVIRONMENTAL SCIENCES↗

Small Molecule Evaluator

Using machine learning to score potential drug candidates may offer an advantage over traditional imprecise scoring functions because the parameters and model structure can be learned from the data. However, models may lack interpretability, are often overfit to the data, and are not generalizable to drug targets and chemotypes not in the training data. Benchmark datasets are prone to artificial enrichment and analogue bias due to the overrepresentation of certain scaffolds in experimentally determined active sets. Datasets can be evaluated using spatial statistics to quantify the dataset topology and better understand potential biases. Dataset clumping comprises a combination of self-similarity of actives and separation from decoys in chemical space and is associated with overoptimistic virtual screening results. This code explores methods of quantifying potential biases and examines some common benchmark datasets.

Ellingson, Sally↗

buhito

buhito is a Python library for graph analysis and machine learning. Graphs can represent networks with objects as nodes and their relationships as edges. buhito focuses on graphlet methods that study graphs through enumerating their component subgraphs to enable interpretable and fast models of complex systems. The package provides tools for different algorithmic designs for computing, analyzing, and applying graphlets to research problems such as machine learning, data compression, and anomaly detection in graph-structured data. A central feature is performing decomposition data analysis on graphs for machine learning models. Implemented in Python and built upon open-source scientific libraries such as NetworkX, NumPy, and SciPy, buhito provides high-performance methods for researchers exploring the mathematical and computational foundations of graphlet analysis applicable to systems of different sizes.

Pimonova, Yulia↗