Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Simulated Feasibility of 3D Lightning Mapping from Space

In addition to the awe it inspires, lightning can illuminate the microphysical processes hidden away within deep convection. The current generation of space-based lightning mapping uses mostly 2D optical imaging to connect overall flash characteristics to their parent storm dynamics, but are missing a dimension’s worth of information. With lightning now classified as an essential climate variable, future spaceborne mappers will need improved capabilities to take advantage of the 3D structure of lightning flashes to support meteorological and climate modeling. We report here on a study of the feasibility of implementing a radio frequency (RF)–based network of satellites for 3D lightning mapping in high resolution from low Earth orbit (LEO). Lightning sources are simulated using existing tools of the Lightning Mapping Array (LMA), modified for orbital detection, and spatially reconstructed using a Levenberg-Marquardt geolocation algorithm to assess sources of uncertainty in these solutions. We analyze the benefits and limitations of this approach compared to existing orbital and ground-based methods. Results of this study show that lightning can be mapped in 3D with a vertical location accuracy better than 2 km using as few as five satellites in LEO capable of measuring the time-of-arrival of impulsive RF signals in the very high frequency (VHF) band. The consequence of this study is that high-resolution, spaceborne 3D mapping of lightning is achievable across most of the globe, having crucial implications for our understanding of not only lightning, but also severe weather development, climate science, and more.

CubeSpark↗

Simulation and analysis of Magnetically-Applied Pressure-Shear (MAPS) experiments.

A new experimental technique to measure material shear strength at high pressures has been developed for use on magnetohydrodynamic (MHD) drive pulsed power platforms. The technique is referred to as Magnetically-Applied Pressure-Shear (MAPS). By applying an external static magnetic field to the sample region, the MHD drive directly induces a shear stress wave in addition to the usual longitudinal stress wave. Strength is probed by passing this shear wave through a sample material where the transmissible shear stress is limited to the sample strength. The magnitude of the transmitted shear wave is measured via a transverse velocity interferometry system (VISAR) from which the sample strength is determined. The strength of materials is defined as the ability of a material to sustain deviatoric (shear) stresses. Strength is an important aspect of the response of materials subjected to compression to high pressure. Beyond the elastic response, material strength will govern at what pressure and to what extent a material will plastically deform. The MAPS technique cleverly exploits the property that, for a von Mises yield criterion at a given longitudinal stress, the maximum amplitude shear wave that can be transmitted is limited by the strength at that stress level. Successful fielding of MAPS experiments to measure shear stresses relies upon correct numerical simulation of the experiment. Complex wave interactions among forward and reflected longitudinal and shear waves, as well as the advancing magnetic diffusion front of the MHD drive, can make the design of the experiment complicated. Careful consideration must be given to driver, sample, and anvil materials; to the thicknesses of the driver, sample and anvil layers; as well as to the timing of the interacting waves. This paper will present and analyze the 2D MHD simulations used to design the MAPS experiments. The MAPS experiments are modeled using Sandia's ALEGRA-MHD simulation code. ALEGRA-MHD is an operator-split, multi-physics, multi-material, arbitrary lagrangian-eulerian code developed to model magnetic implosion, ceramic fracture, and electromagnetic launch. We will detail the numerical investigations into MHD shear generation, longitudinal and shear stress coupling, timing of wave interactions, and transmission of shear at material interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

System and method for generating a deselect mapping for a focal plane array

A method for generating a deselect mapping for a focal plane array according to one embodiment includes gathering a data set for a focal plane array when exposed to light or radiation from a first known target; analyzing the data set for determining which pixels or subpixels of the focal plane array to add to a deselect mapping; adding the pixels or subpixels to the deselect mapping based on the analysis; and storing the deselect mapping. A method for gathering data using a focal plane array according to another embodiment includes deselecting pixels or subpixels based on a deselect mapping; gathering a data set using pixels or subpixels in a focal plane array that are not deselected upon exposure thereof to light or radiation from a target of interest; and outputting the data set.

97 MATHEMATICS AND COMPUTING↗

Systems and methods that generate height map models for efficient three dimensional reconstruction from depth information

Methods of generating a three dimensional representation of an object in a reference plane from a depth map including distances from a reference point to pixels in an image of the object taken from a reference point. Weights are assigned to respective voxels in a three dimensional grid along rays extending from the reference point through the pixels in the image based on the distances in the depth map from the reference point to the respective pixels, and a height map including an array of height values in the reference plane is formed based on the assigned weights. An n-layer height map may be constructed by generating a probabilistic occupancy grid for the voxels and forming an n-dimensional height map comprising an array of layer height values in the reference plane based on the probabilistic occupancy grid.

42 ENGINEERING↗

Compiler-generated memory mapping hints

According to one embodiment, a method of creating compiler-generated memory mapping hints in a computer system includes analyzing code, by a compiler of the computer system, to identify data access patterns in the code. System configuration information defining data processing system characteristics of a target system for the code is accessed. The data processing system characteristics include a plurality of processing resources and memory domain characteristics relative to the processing resources. A preferred allocation of data in memory domains of the target system is determined based on mapping the code to one or more selected processing resources and mapping the data to one or more of the memory domains based on the memory domain characteristics relative to the one or more selected processing resources. The preferred allocation is stored as compiler-generated memory mapping hints in a format accessible by a physical memory mapping resource of the target system.

97 MATHEMATICS AND COMPUTING↗

Mapping Lake Sturgeon ( Acipenser Fluvescens ) Spawning habitat in the Upper Tennessee River Using Side Scan Sonar

The Lake Sturgeon Acipenser fulvescens is a fish species that was once dispersed widely throughout the Mississippi River drainage but was largely extirpated from the southern portions of its range by overfishing and habitat degradation. There is an ongoing restoration effort to reestablish the Lake Sturgeon to rivers of the Southeastern United States. Reintroduced juvenile Lake Sturgeon now occupy several reservoirs along the Upper Tennessee River that are separated from each other by hydroelectric dams. To complete their life history, Lake Sturgeon will migrate upriver from reservoir habitats to more lotic habitats and spawn over coarse rocky substrate, even in the tailwaters of impassable dams. We mapped the substrate of four tailwaters that may be future Lake Sturgeon spawning locations using low-cost, consumer-grade side scan sonar and a GIS. We used video imagery collected from random locations within the mapped areas to validate our digitization of sonar imagery. We calculated the area of four substrate classes displayed in the maps to assess the suitability of each of the tailwaters for Lake Sturgeon spawning. The best spawning substrate (unembedded, coarse, rocky substrate 6 – 25 cm in diameter) comprised 17.0 – 30.5% of the total area mapped at each dam, while the least suitable substrate class (fine sediment <0.2 cm in diameter) comprised 6.2 – 30.7% of the mapped areas. Our results suggest any future spawning events by Lake Sturgeon below each of these dams are likely to encounter some suitable spawning substrate patches, while management opportunities exist to supplement other tailwater areas with suitable spawning substrate.

13 HYDRO ENERGY↗

Scalable In Situ Computation of Lagrangian Representations via Local Flow Maps

In situ computation of Lagrangian flow maps to enable post hoc time-varying vector field analysis has recently become an active area of research. However, the current literature is largely limited to theoretical settings and lacks a solution to address scalability of the technique in distributed memory. To improve scalability, we propose and evaluate the benefits and limitations of a simple, yet novel, performance optimization. Our proposed optimization is a communication-free model resulting in local Lagrangian flow maps, requiring no message passing or synchronization between processes, intrinsically improving scalability, and thereby reducing overall execution time and alleviating the encumbrance placed on simulation codes from communication overheads. To evaluate our approach, we computed Lagrangian flow maps for four time-varying simulation vector fields and investigated how execution time and reconstruction accuracy are impacted by the number of GPUs per compute node, the total number of compute nodes, particles per rank, and storage intervals. Our study consisted of experiments computing Lagrangian flow maps with up to 67M particle trajectories over 500 cycles and used as many as 2048 GPUs across 512 compute nodes. In all, our study contributes an evaluation of a communication-free model as well as a scalability study of computing distributed Lagrangian flow maps at scale using in situ infrastructure on a modern supercomputer.

Sane, Sudhanshu↗

Time-Resolved Temperature Mapping System for the APS Deflecting Cavity

Time-resolved temperature mapping of a superconducting cavity can give valuable information on the limiting process of the cavity performance. A fast temperature mapping system has been developed at Argonne National Laboratory (ANL) for a superconducting deflecting cavity test. The time resolution of the temperature mapping could be up to 50 us. Not only the spatial distribution of surface heating but also the thermodynamics can be recorded, which helps to understand the limitation mechanism. This new temperature mapping system has helped us to understand the rf performance limitations during the cavity vertical tests. Based on the findings from the temperature mapping, proper cavity treatment has been applied and the cavity performances have been improved.

Nassiri, A.↗

Mapping and imaging ionizing radiation in two and three dimensions

A two-dimensional imaging system and a two-dimensional or three-dimensional optical tomographic mapping system, each employing gas scintillation induced by ionizing radiation, i.e., radioluminescence, and corresponding methods, are disclosed. The systems may employ one or more cameras and corresponding UV filters (potentially solar blind filters) for imaging a radioluminescent scene. For two-dimensional or three-dimensional mapping, the resultant UV images are spatially registered with one another and then reconstructed to form a three-dimensional tomographic map of the ionizing radiation. The two-dimensional map is a plane of the three-dimensional map. The UV images may be spatially registered by using a reference source, optionally, a calibrated reference source allowing dosimetry calculations for the ionizing radiation. Molecular nitrogen is the primary candidate for the radioluminescent gas, though a controlled ambient in a chamber of nitric oxide, argon, krypton, or xenon may be employed. The reconstruction process employs an algebraic reconstruction technique or an Abel inversion.

Bentz, Brian Z.↗

Improved Safety Injection Flow Map Associated with Target RCS Depressurization to Maintain Core Coolability of OPR1000

In Korea, Severe Accident Management Guidance (SAMG) for Optimized Power Reactor (OPR1000) has been developed through the research results related to the WOG SAMG, in which the operation phase shifts from the Emergency Operation Procedure (EOP) to the SAMG when the Core Exit Temperature (CET) reaches 923 K. Among 7 mitigation strategies envisioned, the third management strategy, injecting coolant into Reactor Coolant System (RCS) by depressurizing the RCS is one of the key strategies to fortify the in-vessel retention capability. As an aid to such mitigation strategy, a safety injection (SI) flow map has been developed by Lee et al. for predicting required flow rate associated with target RCS depressurization to recover in-vessel coolability. The mechanistic SI flow map used the CET increase rate and core water level decrease rate obtained from MELCOR code simulation. It should be noted that during the severe accident, the total heat generated is sum of the decay heat and the oxidation heat. Thus, it is necessary to consider additional heat sources by oxidation reaction between cladding, structure, control rod, and hot steam prior to the injection of coolant. It was believed that the SI model estimated required flow rate rather conservatively by considering the expected amount decay heat and the accumulated heat in the core based on the RCS pressure. However, it was confirmed that the SI model developed by Lee et al. could not represent the total heat removal especially since start of oxidation. Under transient conditions, the heat sources accumulated in the heat structures (fuel, cladding, supporting structures) should be embarked in the model for accurate contribution of the total heat source to the required flow rate. Therefore, the objective of this study is to improve the previous SI flow map predicting the injection flow rate associated with target RCS depressurization to satisfy the in-vessel coolability during severe accidents. Additional terms were developed to reflect accurate heat accumulating and included in the existing model. Resulting SI flow map includes the target RCS depressurization, which enables discharge of the required flow rate by utilizing the flow rate-pressure curve with operation of two high pressure safety injections (HPSIs). Also recent MELCOR simulation result of a postulated steam generator tube rupture (SGTR) accident verified the accuracy of the improved map.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DECADE+DES Y3 Weak Lensing Mass Map: A 13,000 deg$^2$ View of Cosmic Structure from 270 Million Galaxies

We present the largest galaxy weak lensing mass map of the late-time Universe, reconstructed from 270 million galaxies in the DECADE and DES Year 3 datasets, covering 13,000 square degrees. We validate the map through systematic tests against observational conditions (depth, seeing, etc.), finding the map is statistically consistent with no contamination. The large area covered by the mass map makes it a well-suited tool for cosmological analyses, cross-correlation studies and the identification of large-scale structure features. We demonstrate its potential by detecting cosmic filaments directly from the mass map for the first time and validating them through their association with galaxy clusters selected using the Sunyaev-Zeldovich effect from Planck and ACT DR6.

Gatti, M. [Chicago U., KICP] (ORCID:00000001613487↗

Multi-Split Variable Refrigerant Flow (VRF) System Building Energy Simulations Using Performance Maps

Multi-split variable refrigerant flow (VRF) systems are highly energy-efficient HVAC (heating, ventilation and air conditioning) technologies that connect a single outdoor unit to multiple independent indoor terminal units using a common refrigerant circuit and a variable-speed compressor. Building energy simulations that incorporate VRF systems help model their unique operational characteristics and predict energy consumption in specific building designs. Traditionally, EnergyPlus models these systems by employing multiple sets of performance curves to characterize both individual terminal units and the outdoor unit. However, producing these curves is labor intensive and error prone, and they often do not capture all the key input and output variables. This paper introduces a novel approach that uses multi-dimensional performance maps to model VRF systems in building environments for space cooling. In this approach, performance maps are developed at the component level—separately for the outdoor unit and for each indoor terminal. The new modeling method is validated within EnergyPlus via a Python plug-in that contains a simple solver loop to coordinate the component-level, indoor, and outdoor unit maps. Furthermore, because performance maps can span more variables than traditional performance curves, they offer the opportunity to implement advanced controls, such as enhanced dehumidification and compressor modulation. A VRF air conditioner’s hardware system was modeled using the DOE/ORNL Heat Pump Design Model, which was automated to produce extensive performance maps for both the indoor and outdoor units.

Shen, Bo [ORNL] (ORCID:0000000336600393)↗

Complexity analysis of pipeline mapping problems in distributed heterogeneous networks

Largescale scientific applications require using various system resources to execute complex computing pipelines in distributed networks to support collaborative research. System resources are typically shared in the Internet or over dedicated connections based on their location, availability, capability, and capacity. Optimizing the network performance of computing pipelines in such distributed environments is critical to the success of these applications. We consider two types of largescale distributed applications: (1) interactive applications where a single dataset is sequentially processed along a pipeline; and (2) streaming applications where a series of datasets continuously flow through a pipeline. The computing pipelines of these applications consist of a number of modules executed in a linear order in network environments with heterogeneous resources under different constraints. Our goal is to find an efficient mapping scheme that allocates the modules of a pipeline to network nodes for minimum endtoend delay or maximum frame rate. We formulate the pipeline mappings in distributed environments as optimization problems and categorize them into six classes with different optimization goals and mapping constraints: (1) Minimum Endtoend Delay with No Node Reuse (MEDNNR), (2) Minimum Endtoend Delay with Contiguous Node Reuse (MEDCNR), (3) Minimum Endtoend Delay with Arbitrary Node Reuse (MEDANR), (4) Maximum Frame Rate with No Node Reuse or Share (MFRNNRS), (5) Maximum Frame Rate with Contiguous Node Reuse and Share (MFRCNRS), and (6) Maximum Frame Rate with Arbitrary Node Reuse and Share (MFRANRS). Here, 'contiguous node reuse' means that multiple contiguous modules along the pipeline may run on the same node and 'arbitrary node reuse' imposes no restriction on node reuse. Note that in interactive applications, a node can be reused but its resource is not shared. We prove that MEDANR is polynomially solvable and the rest are NP-complete. MEDANR, where either contiguous or noncontiguous modules in the pipeline can be mapped onto the same node, is essentially the Maximum n-hop Shortest Path problem, and can be solved using a dynamic programming method. In MEDNNR and MFRNNRS, any network node can be used only once, which requires selecting the same number of nodes for onetoone onto mapping. We show its NP-completeness by reducing from the Hamiltonian Path problem. Node reuse is allowed in MEDCNR, MFRCNRS and MFRANRS, which are similar to the Maximum n-hop Shortest Path problem that considers resource sharing. We prove their NP-completeness by reducing from the Disjoint-Connecting-Path Problem and Widest path with the Linear Capacity Constraints problem, respectively.

99 GENERAL AND MISCELLANEOUS↗

A new method to compute periodic orbits in general symplectic maps

The search of high-order periodic orbits has been typically restricted to problems with symmetries that help to reduce the dimension of the search space. Well-known examples include reversible maps with symmetry lines. The present work proposes a new method to compute high-order periodic orbits in twist maps without the use of symmetries. The method is a combination of the parameterization method in Fourier space and a Newton–Gauss multiple shooting scheme. The parameterization method has been successfully used in the past to compute quasi-periodic invariant circles. However, this is the first time that this method is used in the context of periodic orbits. Numerical examples are presented showing the accuracy and efficiency of the proposed method. Furthermore, the method is also applied to verify the renormalization prediction of the residues’ convergence at criticality (extensively studied in reversible maps) in the relatively unexplored case of maps without symmetries.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluation of noise pollution in urban traffic hubs—Noise maps and measurements

A study was made of some of the main traffic hubs in a Latin American metropolis, in order to determine the presence or absence of noise by means of noise measurements and acoustic mapping. To characterize noise in the evaluated road stretches, 232 measurements were taken at different points. The Predictor software package was used for the noise mapping calculations. Noise sensitive areas, e.g., hospitals, were identified in the evaluated road stretches. Noise maps were calculated for two hospitals, showing the current levels of noise that reach their facades. Hypothetical scenarios were simulated by making changes in the composition of traffic and total number of vehicles, and an assessment was made of the potential influence of these modifications in reducing the noise levels reaching the facades of the buildings in question. The simulations indicated that a 50% reduction in total traffic flow, or a 50% reduction in heavy vehicle traffic flow, would reduce the noise levels by about 3 dB(A). - Highlights: • Evaluation of noise pollution in urban traffic hubs • Street systems • Environmental noise impacts • Noise mapping.

54 ENVIRONMENTAL SCIENCES↗

Three-Dimensional Statistical Gas Distribution Mapping in an Uncontrolled Indoor Environment

In this paper we present a statistical method to build three-dimensional gas distribution maps (3D-DM). The proposed mapping technique uses kernel extrapolation with a tri-variate Gaussian kernel that models the likelihood that a reading represents the concentration distribution at a distant location in the three dimensions. The method is evaluated using a mobile robot equipped with three 'e-noses' mounted at different heights. Initial experiments in an uncontrolled indoor environment are presented and evaluated with respect to the ability of the 3D map, computed from the lower and upper nose, to predict the map from the middle nose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The theory of shell-based Q-mappings in geometric function theory

Open, discrete Q-mappings in R{sup n}, n{>=}2, Q element of L{sup 1}{sub loc}, are proved to be absolutely continuous on lines, to belong to the Sobolev class W{sub loc}{sup 1,1}, to be differentiable almost everywhere and to have the N{sup -1}-property (converse to the Luzin N-property). It is shown that a family of open, discrete shell-based Q-mappings leaving out a subset of positive capacity is normal, provided that either Q has finite mean oscillation at each point or Q has only logarithmic singularities of order at most n-1. Under the same assumptions on Q it is proved that an isolated singularity x{sub 0} element of D of an open discrete shell-based Q-map f:D/{l_brace}x{sub 0{r_brace}{yields}}R-bar{sup n} is removable; moreover, the extended map is open and discrete. On the basis of these results analogues of the well-known Liouville, Sokhotskii-Weierstrass and Picard theorems are obtained. Bibliography: 34 titles.

97 MATHEMATICS AND COMPUTING↗

THE GALACTIC CENSUS OF HIGH- AND MEDIUM-MASS PROTOSTARS. I. CATALOGS AND FIRST RESULTS FROM MOPRA HCO{sup +} MAPS

The Census of High- and Medium-mass Protostars (CHaMP) is the first large-scale, unbiased, uniform mapping survey at sub-parsec-scale resolution of 90 GHz line emission from massive molecular clumps in the Milky Way. We present the first Mopra (ATNF) maps of the CHaMP survey region (300{sup 0} > l > 280{sup 0}) in the HCO{sup +} J = 1 {yields} 0 line, which is usually thought to trace gas at densities up to 10{sup 11} m{sup -3}. In this paper, we introduce the survey and its strategy, describe the observational and data reduction procedures, and give a complete catalog of moment maps of the HCO{sup +} J = 1{yields}0 emission from the ensemble of 303 massive molecular clumps. From these maps we also derive the physical parameters of the clumps, using standard molecular spectral-line analysis techniques. This analysis yields the following range of properties: integrated line intensity 1-30 K km s{sup -1}, peak line brightness 1-7 K, linewidth 1-10 km s{sup -1}, integrated line luminosity 0.5-200 K km s{sup -1} pc{sup 2}, FWHM size 0.2-2.5 pc, mean projected axial ratio 2, optical depth 0.08-2, total surface density 30-3000 M{sub sun} pc{sup -2}, number density (0.2-30) x 10{sup 9} m{sup -3}, mass 15-8000 M{sub sun}, virial parameter 1-55, and total gas pressure 0.3-700 pPa. We find that the CHaMP clumps do not obey a Larson-type size-linewidth relation. Among the clumps, there exists a large population of subthermally excited, weakly emitting (but easily detectable) dense molecular clumps, confirming the prediction of Narayanan et al. These weakly emitting clumps comprise 95% of all massive clumps by number, and 87% of the molecular mass, in this portion of the Galaxy; their properties are distinct from the brighter massive star-forming regions that are more typically studied. If the clumps evolve by slow contraction, the 95% of fainter clumps may represent a long-lived stage of pressure-confined, gravitationally stable massive clump evolution, while the CHaMP clump population may not engage in vigorous massive star formation until the last 5% of their lifetimes. The brighter sources are smaller, denser, more highly pressurized, and closer to gravitational instability than the less bright sources. Our data suggest that massive clumps approach critical Bonnor-Ebert-like states at constant density, while others' suggest that lower-mass clumps reach such states at constant pressure. Evidence of global gravitational collapse of massive clumps is rare, suggesting that this phase lasts <1% of the clumps' lifetime.

79 ASTRONOMY AND ASTROPHYSICS↗