Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Influence of Solidification Velocity on Partitioning and Precipitate Evolution in a Multicomponent, Soft Magnetic Alloy Processed by Laser Melting

Multicomponent alloys have recently been shown to overcome the structural-functional barrier associated with soft magnetic materials. Here, single laser tracks have been used to investigate the effects of solidification velocity on the Al 7 Fe 32.6 Co 27.7 Ni 27.7 Ta 5 (at pct) alloy. Ta-rich cell wall partitioning was shown to affect the final distribution and size of the precipitating L1 2 phase, after aging. These findings demonstrate that solidification rate control offers the potential to tailor localized performance in alloys with size-dependent precipitation properties.

Brookins, Jeffrey M. [Oak Ridge National Laborator↗

Mechanism of Texture and Precipitates Evolution in CGO Silicon Steel During High-Temperature Annealing Process

Grain-oriented silicon steel is an important soft magnetic material for electrical applications. A conventional grain-oriented silicon steel with final thicknesses of 0.27, 0.23 and 0.20 mm was prepared separately by a two-stage cold rolling process. Texture evolution, precipitates distribution and Goss textures formed during secondary recrystallization were analyzed by electron backscattered diffraction and field emission scanning electron microscopy. The results show that plate thickness influences the distribution density of secondary phase particles and the content of favorable texture components such as {111} <112>, {111} <110> and {112} <110> texture. Decreasing plate thickness increases the areal density of secondary phase particles, the temperature of secondary recrystallization, which also increases the content of favorable texture component, and the strength of Goss texture in secondary recrystallization. Goss grains have higher particle density than the grains with other orientations, which facilitates their abnormal growth by swallowing surrounding grains with lower particle density.

36 MATERIALS SCIENCE↗

Disorder-order transformation in Fe-50%Co fabricated via laser powder bed fusion

Fe-Co alloys are an important class of soft magnetic materials that often pose challenges in their fabrication because of the brittle B2-ordered phase. We show that laser beam powder bed fusion (PBF-LB), owing to its rapid cooling rates, offers an avenue for the fabrication of these alloys by suppressing the disorder →order phase transformation at room temperature. We use neutron diffraction to understand the phase transformations in a Fe-50%Co alloy fabricated via PBF-LB. We report that the disorder→order phase transformation in this alloy occurs concurrently via homogeneous ordering and classical nucleation and growth.

36 MATERIALS SCIENCE↗

A high-performance implementation of atomistic spin dynamics simulations on x86 CPUs

Atomistic spin dynamics simulations provide valuable information about the energy spectrum of magnetic materials in different phases, allowing one to identify instabilities and the nature of their excitations. However, the time cost of evaluating the dynamical correlation function S(q,t) increases quadratically as the number of spins N, leading to significant computational effort, making the simulation of large spin systems very challenging. In this work, here, we propose to use a highly optimized general matrix multiply (GEMM) subroutine to calculate the dynamical spin-spin correlation function that can achieve near-optimal hardware utilization. Furthermore, we fuse the element-wise operations in the calculation of S(q,t) into the in-house GEMM kernel, which results in further performance improvements of 44\% - 71\% on several relatively large lattice sizes when compared to the implementation that uses the GEMM subroutine in OpenBLAS, which is the state-of-the-art open source library for Basic Linear Algebra Subroutine (BLAS).

97 MATHEMATICS AND COMPUTING↗

Record acceleration of the two-dimensional Ising model using a high-performance wafer-scale engine

The versatility and wide-ranging applicability of the Ising model, originally introduced to study phase transitions in magnetic materials, have made it a cornerstone in statistical physics and a valuable tool for evaluating the performance of emerging computer hardware. Here, we present a novel implementation of the two-dimensional Ising model on Cerebras Wafer-Scale Engine (WSE) – a revolutionary processor that is opening new frontiers in computing. In our deployment of the checkerboard algorithm, we optimized the Ising model to take advantage of the unique WSE architecture. Specifically, we employed a compressed bit representation storing 16 spins on each int16 word, and efficiently distributed the spins over the processing units enabling seamless weak scaling and limiting communications to only immediate neighboring units. Our implementation can handle up to 754 simulations in parallel, achieving an aggregate of over 61.8 trillion flip attempts per second for Ising models with up to 200 million spins. This represents a gain of up to 148 times over previously reported single-devices with a highly optimized implementation on NVIDIA V100 and up to 88 times in productivity compared to NVIDIA H100. Our findings highlight the significant potential of the WSE in scientific computing, particularly in the field of materials modeling.

Ising model↗

An overview of the first principles studies of doped RE-TM5 systems for the development of hard magnetic properties

In this study, we compiled all the first principles calculations performed on RE-TM 5 (RE: rare earth, TM: transition metal) system to address the following question: Has everything been tried to improve the hard magnetic properties of this special intermetallic compound, and are there any venues that are worth pursuing? As it is the case with the first principles studies in any field, they are driven mainly by experimental work: (i) to validate their results, and (ii) to extend our understanding of the underlying physical phenomena so that the theory in hand can be used as a predictive tool to shed light on certain what-if scenarios. Our analysis indicates that three major compounds are investigated more than others: (1) YCo 5 , because it can potentially be an intermediate-performance hard magnet, and the presence of yttrium with no localized 4f electrons simplifies calculations significantly, (2) SmCo 5 , because it has the largest magnetic anisotropy energy among all RE hard magnets as well as very impressive high temperature performance, (3) CeCo 5 , because Ce is the most abundant rare earth element with a curious 4f electron behavior that gives rise to pronounced deviations in its structural and magnetic properties across the lanthanides series. This is followed by a brief analysis of several ab initio approaches that were developed to treat these rather complicated systems both at 0 K and at finite temperatures. Towards the end, we elucidate the role of exchange-correlation approximations such as local density approximations (LDA) and generalized gradient approximation (GGA) formulation in determining the MAE and M s by analyzing their corresponding density of states (DOS), and providing our results on a rather overlooked hard-magnetic material: LaCo 5 .

36 MATERIALS SCIENCE↗

Structure and magnetic properties of RE{sub 2}Cu{sub 2}Cd

The ternary intermetallic compounds RE{sub 2}Cu{sub 2}Cd (RE=Y, Sm, Gd-Tm, Lu) were synthesized by induction-melting of the elements in sealed tantalum tubes. The samples were characterized by X-ray powder diffraction. The structure of Gd{sub 2}Cu{sub 2}Cd was refined from single crystal X-ray diffractometer data: Mo{sub 2}FeB{sub 2} type, space group P4/mbm, a=756.2(3), c=380.2(3) pm, wR2=0.0455, 321 F{sup 2} values, 12 variables. The structures are 1:1 intergrowth variants of slightly distorted CsCl and AlB{sub 2} related slabs of compositions RECd and RECu{sub 2}. The copper and cadmium atoms build up two-dimensional [Cu{sub 2}Cd] networks (257 pm Cu-Cu and 301 pm Cu-Cd in Gd{sub 2}Cu{sub 2}Cd) which are bonded to the rare earth atoms via short RE-Cu contacts (290 pm in Gd{sub 2}Cu{sub 2}Cd). Temperature dependent susceptibility measurements of RE{sub 2}Cu{sub 2}Cd with RE=Gd, Tb, Dy, and Tm show experimental magnetic moments which are close to the free RE{sup 3+} ion values. The four compounds show ferromagnetic ordering at T{sub C}=116.7(2), 86.2(3), 48.4(1), and 14.5(1) K, respectively, as confirmed by heat capacity measurements. Dy{sub 2}Cu{sub 2}Cd shows a spin reorientation at T{sub N}=16.9(1) K. - Graphical Abstract: The intergrowth structure of Gd{sub 2}Cu{sub 2}Cd.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of high intrinsic loss power aqueous ferrofluids of iron oxide nanoparticles by citric acid-assisted hydrothermal-reduction route

Monodispersed aqueous ferrofluids of iron oxide nanoparticle were synthesized by hydrothermal-reduction route. They were characterized by X-ray diffraction analysis, Fourier transform infrared spectroscopy, scanning and transmission electron microscopy and dynamic light scattering. The results showed that certain concentrations of citric acid (CA) are required to obtain only magnetic iron oxides with mean particle sizes around 8 nm. CA acts as a modulator and reducing agent in iron oxide formation which controls nanoparticle size. The XRD, magnetic and heating measurements showed that the temperature and time of hydrothermal reaction can affect the magnetic properties of obtained ferrofluids. The synthesized ferrofluids were stable at pH 7. Their mean hydrodynamic size was around 80 nm with polydispersity index (PDI) of 0.158. The calculated intrinsic loss power (ILP) was 9.4 nHm{sup 2}/kg. So this clean and cheap route is an efficient way to synthesize high ILP aqueous ferrofluids applicable in magnetic hyperthermia. - Graphical abstract: Monodispersed aqueous ferrofluids of iron oxide nanoparticles were synthesized by hydrothermal-reduction method with citric acid as reductant which is an efficient way to synthesize aqueous ferrofluids applicable in magnetic hyperthermia. Highlights: Black-Right-Pointing-Pointer Aqueous iron oxide ferrofluids were synthesized by hydrothermal-reduction route. Black-Right-Pointing-Pointer Citric acid acted as reducing agent and surfactant in the route. Black-Right-Pointing-Pointer This is a facile, low energy and environmental friendly route. Black-Right-Pointing-Pointer The aqueous iron oxide ferrofluids were monodispersed and stable at pH of 7. Black-Right-Pointing-Pointer The calculated intrinsic loss power of the synthesized ferrofluids was very high.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth mechanism and magnetic properties of magnetite nanoparticles during solution process

We investigated the growth mechanism of magnetite nanoparticles during chemical synthesis by analyzing their physicochemical properties. The transformation from metallic precursor to particles and the growth of the particle occurred during chemical synthesis. During the transformation process, Fe(acac){sub 3}, which was used as a metallic precursor, was decomposed, fabricating an Fe oleate. The Fe oleates then agglomerated to each other to form Fe oleate clusters. Finally, the Fe oleate cluster was reduced, and a magnetite nanoparticle was fabricated. During the growth process of the magnetite nanoparticle, the diameter of the magnetite nanoparticles increased as the reaction temperature increased. Then, the Fe oleates on the surface of the magnetite nanoparticle were reduced at a constant rate, and as a result, the magnetite nanoparticle grew significantly. - Highlights: • The growth mechanism of magnetite nanoparticle was found by analyzing properties. • The growth mechanism consisted of nucleus generation and particle growth. • Magnetite was prepared using Fe(acac){sub 3}, Fe oleates, and Fe oleate clusters. • Fe oleates on the surface of the particles were reduced at a constant rate. • The nanoparticles increased in diameter due to the reduction of the Fe oleates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CuSn(OH){sub 6} submicrospheres: Room-temperature synthesis, growth mechanism, and weak antiferromagnetic behavior

Highlights: Black-Right-Pointing-Pointer CuSn(OH){sub 6} spheres have been synthesized via an aqueous solution method at room temperature. Black-Right-Pointing-Pointer The diameters of the CuSn(OH){sub 6} spheres can be tuned by adjusting the molar ratio of SnO{sub 3}{sup 2-} to Cu{sup 2+}. Black-Right-Pointing-Pointer The as-obtained CuSn(OH){sub 6} spheres are antiferromagnetic and have a weak spin-Peierls transition at about 78 K -- Abstract: CuSn(OH){sub 6} submicrospheres with diameters of 400-900 nm have been successfully fabricated using a simple aqueous solution method at room temperature. Influencing factors such as the dosage of reactants and reaction time on the preparation were systematically investigated. The products were characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and differential thermal analysis (DTA). Results reveal that the CuSn(OH){sub 6} spheres are built from numerous nanoparticles. It is found that the diameter of CuSn(OH){sub 6} spheres can be readily tuned by adjusting the molar ratio of SnO{sub 3}{sup 2-} to Cu{sup 2+}. A possible growth mechanism for the CuSn(OH){sub 6} submicrospheres has been proposed. Amorphous CuSnO{sub 3} submicrospheres were obtained after thermal treatment of the CuSn(OH){sub 6} submicrospheres at 300 Degree-Sign C for 4 h. Standard magnetization measurements demonstrate that the CuSn(OH){sub 6} submicrospheres are antiferromagnetic and have a weak spin-Peierls transition at about 78 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relaxor-like ferroelectric behaviour favoured by short-range B-site ordering in 10% Ba{sup 2+} substituted MgFe{sub 2}O{sub 4}

Graphical abstract: - Highlights: • Mechanism driving polarization in MgFe{sub 2}O{sub 4} is the Maxwell–Wagner polarization. • But Raman studies confirm the existence of local P4{sub 1}22/P4{sub 3}22 symmetry in MgFe{sub 2}O{sub 4}. • Ba{sup 2+} substitution increases ferroelectric ordering, ΔT{sub m} span, and masks electronic contribution. - Abstract: Using the molten salt method, pristine and Ba{sup 2+} substituted MgFe{sub 2}O{sub 4} are prepared. The relaxor-like behaviour observed in the dielectric dispersion indicates the existence of B-site short-range ordering with the local P4{sub 1}22/P4{sub 3}22 symmetry which is confirmed by the Raman spectroscopy. The paper further analyses the origin of polarization using Maxwell–Wagner fit and Nyquist plot. This work suggests a possible way to increase the relaxor-like ferroelectric ordering, larger span of relaxation temperature (ΔT{sub m}) and the effective masking of electronic contribution by the substitution of Ba{sup 2+} ion.

36 MATERIALS SCIENCE↗

Amorphous RE–Fe–B–Na colloidal nanoparticles: High temperature solution synthesis and magnetic properties

Graphical abstract: RE–Fe–B–Na (RE = Nd–Er) colloidal nanoparticles by high-temperature solution synthesis are ultra-small monodisperse and air-stable amorphous, whose size and magnetic dependence are studied. - Highlights: • RE–Fe–B–Na nanoparticles are obtained by high-temperature solution synthesis. • These colloidal nanoparticles are monodisperse and size controlled. • The magnetism dependence and possible magnetic coupling mechanism are studied. - Abstract: RE–Fe–B–Na (RE = Nd–Er) colloidal nanoparticles are prepared by high-temperature solution synthesis. These nanoparticles are ultra-small monodisperse, air-stable and amorphous, whose particle size and magnetic property are characterized by transmission electron microscope and superconducting quantum interference device. Taking Nd–Fe–B–Na nanoparticle as an example, it is found that the particle size can be controlled in less than 7 nm. Besides, the magnetic properties of RE–Fe–B–Na colloidal nanoparticles can be compared for different rare earth elements. Based on the bulk ferromagnetic coupling, other possible magnetic coupling mechanism is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Three-dimensional flowerlike iron oxide nanostructures: Morphology, composition and metal ion removal capability

Graphical abstract: The iron alkoxide precursors are calcined into α-Fe{sub 2}O{sub 3}, Fe{sub 3}O{sub 4} microstructures with different morphologies by changing calcination atmosphere, reaction time of precursors and calcination temperature simply. The Fe{sub 2}O{sub 3}/Ag hybrid composites prepared through aqueous synthesis and light irradiation. - Highlights: • α-Fe{sub 2}O{sub 3} and Fe{sub 3}O{sub 4} microstructures with different morphologies were created. • Solvents play an important role for the solvothermal treatment of precursors. • The α-Fe{sub 2}O{sub 3} microstructures show excellent adsorption properties. • Fe{sub 2}O{sub 3}/Ag hybrid composites were prepared to improve their properties. - Abstract: The flower-like precursors of Fe alkoxide constructed by the self-assembly of nanoflakes were prepared. Time-dependent experiments confirmed the formation mechanism of flower-like precursors. After calcination, α-Fe{sub 2}O{sub 3} and Fe{sub 3}O{sub 4} nanostructures with different morphologies were created. Fe{sub 3}O{sub 4} nanostructures containing blocks with a truncated octahedron structure were obtained under N{sub 2} protection. α-Fe{sub 2}O{sub 3} nanostructures were prepared in an air atmosphere. The values of maximum adsorption capacity of α-Fe{sub 2}O{sub 3} nanostructures for Cr{sup 6+} ions were much higher than that of commercial bulk α-Fe{sub 2}O{sub 3}. Ag NPs were deposited on α-Fe{sub 2}O{sub 3} nanostructures through an aqueous synthesis and light irradiation using L-cysteine as a linker. Such procedure is utilizable for the preparation of the composites of noble metals and magnetic materials.

36 MATERIALS SCIENCE↗

The effects of thickness, polarization, and strain on vibrational modes of 2D Fe 3 GeTe 2

In this study, we investigated the effects of thickness, light polarization, and strain on the Raman spectra of two-dimensional (2D) Fe 3 GeTe 2 (FGT) crystals synthesized via chemical vapor transport. The crystals are thoroughly characterized using a combination of microscopic, diffraction, and spectroscopic techniques. Particularly, a systematic angle-resolved polarized Raman spectroscopy study reveals a clear polarization dependence of the Raman intensity in both parallel and crossed polarization directions, with the $A$$^{1}_{g}$ mode completely disappearing in the crossed polarization direction. The angle-dependent intensity of both the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes in parallel polarization and the intensity of the $E$$^{2}_{2g}$ mode in the crossed polarization remain constant at all angles. These findings align with predictions from Raman tensor analysis, providing compelling evidence for the unambiguous assignment of the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes to specific peaks observed in the Raman spectrum of FGT, resolving existing confusion in the literature regarding their assignment. Furthermore, we examine the effect of strain on the Raman spectrum of 2D FGT in-situ using a bending device. Our study, conducted on a monolayer to few-layer 2D FGT deposited onto polyethylene terephthalate and subjected to outward (inward), i.e., tensile (compressive) bending, demonstrates appreciable downshifting (upshifting) of the Raman peak position of both $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes. Furthermore, these findings are particularly significant given that strain engineering represents an effective approach to modulate the magnetic properties of FGT and other 2D magnetic materials.

2D materials↗

MnBi 2 : A Metastable High-Pressure Phase in the Mn–Bi System

Interacting heavy main group elements that are laden with spin–orbit coupling with transition metals, such as manganese, is a potential route toward the synthesis of new permanent magnets. In theory, this approach can be used to design magnets with large magnetic energy products by maximizing both coercive field and remnant magnetization. Powerful precedent for this approach resides in the intermetallic compound, MnBi, which was for a short time in the 1950’s the most powerful magnetic material in the world. Creating new materials within this phase space is enabled by high-pressure synthesis, which is facilitated by recent advances in in situ techniques within diamond anvil cells. We observed the Mn–Bi system under high pressure in search of novel intermetallic compounds, and herein we report the discovery of MnBi 2 , a novel intermetallic in the Mn–Bi system. This compound forms above 8.3(1) GPa, crystallizing in the Al 2 Cu structure-type with a = 6.8315(1) Å and c = 5.6572(2) Å. This discovery hints at the possibility of further compounds within this underexplored phase space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local Inversion Symmetry Breaking and Thermodynamic Evidence for Ferrimagnetism in Fe 3 GaTe 2

The layered compound Fe 3 GaTe 2 is attracting attention due to its high Curie temperature, low dimensionality, and the presence of topological spin textures above room temperature, making Fe 3 GaTe 2 a good candidate for applications in spintronics. Here, in this study, we show, through transmission electron microscopy (TEM) techniques, that Fe 3 GaTe 2 single crystals break local inversion symmetry while maintaining global inversion symmetry according to X-ray diffraction. Coupled to the observation of Néel skyrmions via Lorentz-TEM, our structural analysis provides a convincing explanation for their presence in centrosymmetric materials. Magnetization measurements as a function of the temperature displays a sharp first-order thermodynamic phase-transition leading to a reduction in the magnetic moment. This implies that the ground state of Fe 3 GaTe 2 is globally ferrimagnetic and not a glassy magnetic state composed of ferrimagnetic, and ferromagnetic domains as previously claimed. Neutron diffraction studies indicate that the ferromagnetic to ferrimagnetic transition upon reducing the external magnetic field is associated with a change in the magnetic configuration/coupling between Fe1 and Fe2 moments. We observe a clear correlation between the hysteresis observed in both the skyrmion density and the magnetization of Fe 3 GaTe 2 . This indicates that its topological spin textures are affected by the development of ferrimagnetism upon cooling. Observation, via magnetic force microscopy, of magnetic bubbles at the magnetic phase boundary suggests skyrmions stabilized by the competition among magnetic phases and distinct exchange interactions. Our study provides an explanation for the observation of Néel skyrmions in centrosymmetric systems, while exposing a correlation between the distinct magnetic phases of Fe 3 GaTe 2 and topological spin textures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Circularly Polarized Attosecond Pulses Enabled by an Azimuthal Phase and Polarization Grating

High-harmonic generation (HHG) is an extreme nonlinear optical process that can map the properties of an infrared driving laser beam onto short wavelength attosecond pulse trains. However, current techniques for generating circularly polarized high harmonics for probing magnetic materials and chiral systems have limitations: two-color collinear counter-rotating driving lasers result in a low cutoff photon energy, while single-color non-collinear counter-rotating schemes suffer from low conversion efficiency. In this work, we generate circularly polarized attosecond pulse trains by using a structured laser driver which has a rotating polarization and phase grating along the azimuthal coordinate. Furthermore, our experimental and numerical results demonstrate the production of left and right circularly polarized harmonics, which naturally separate upon propagation. Our approach uses a single laser color in a collinear geometry, that can be scaled for high efficiency. Simulations show this scheme can extend into the soft x-ray region when driven by mid-infrared driving lasers, while preserving the same high phase-matching cutoff photon energy as for linearly-polarized high harmonics.

attosecond science↗