SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
They witnessed the moment the world changed forever. A few hundred scientists, engineers and soldiers gathered in the New Mexico desert during the early morning hours of July 16, 1945. It was the culmination of years of work at a secret lab in Los Alamos led by J. Robert Oppenheimer.
The ability to accurately locate seismic events is necessary for treaty monitoring. When using techniques that rely on the comparison of observed and predicted travel times to obtain these locations, it is important that the estimated travel times and their estimated uncertainties are also accurate. The methodology of Ballard et al. (2016a) has been used in the past to generate an accurate 3D tomographic global model of compressional wave slowness (the SAndia LoS Alamos 3D tomography model, i.e. SALSA3D). To re-establish functionality and to broaden the capabilities of the method to local distances, we have applied the methodology of Ballard et al. (2016a) to local data in Utah. This report details the results of the initial model generated, including relocations performed using analyst picked mining events at West Ridge Mine and three ground-truth events at Bingham Mine. We were successfully able to generate a feasible tomography model that resulted in reasonable relocations of the mining events.
An overview of the Theoretical Division at Los Alamos National Laboratory is provided.
The Los Alamos hydrodynamics code, FLAG, is capable of dumping many types of output for many different variables in an array of formats. While some outputs are best viewed in a multidimensional engineering analysis visualization software, others are best viewed as 1-D “this versus that” curves. During development of a FLAG model, it is frequently required to quickly assess a model’s performance by reviewing such curves, and doing so may involve writing scripts repeatedly, adapting them each time to a specific model’s parameters. This report describes an application developed specifically to improve user efficiency in reviewing 1-D curve dumps from FLAG.
This report is an FY21 Deliverable for NA-21.1, International Nuclear Security, WBS 21.1.1.1.4 Counter Unmanned Aircraft Systems (CUAS), under C.1.4, Develop Suite of Engagement Materials and Tools for Country/Regional Teams. The responsibility for protecting nuclear assets is an immense challenge for governments. Policy changes based on geopolitics, instability of government regimes, and technological advances that facilitate theft of nuclear material all contribute to the enduring task of staying current with these and other threats. One of the recent threats to come along is the use of drones or Unmanned Aircraft Systems (UAS) to circumvent traditional Physical Security Systems. There are significant resources invested on physical protection systems for securing nuclear assets, but many of these systems can now be bypassed by simply flying over these measures intended to guard against ground attacks. In recent years the threat increased to hostile groups to attack or surveil due to advances and availability of UAS platforms. It is now more urgent to implement systems and procedures to counter the UAS threat. The United States (U.S.) federal government granted authority to the Department of Energy (DOE) to implement a Counter UAS to protect nuclear assets. This document provides a very practical and transparent view of the trials, tribulations and challenges we encountered while implementing the first Counter-Unmanned Aircraft System (CUAS) Program in the DOE at Los Alamos National Laboratory (LANL).
The “FY11 Radioactive Liquid Waste (RLW) Influent Boundary Condition Assessment and Forecast” report provided influent volume forecasts that were critical in establishing the design capacity for the new Radioactive Liquid Waste Transuranic (RLW-TRU) capability. The design for the new RLW-TRU capability was paused as the final design was being completed and prior to the transition of the new management and operations contract for Los Alamos National Laboratory (LANL). Recently, NNSA has directed the project to restart and complete the design effort. As part of the restart process, LANL was asked to validate or document any material changes in the influent volumes or constituents that formed the design basis for the new capability. This analysis updates the transuranic liquid waste influents volumes, incorporating the changes in the LANL program of record since the FY11 assessment, and includes a cursory validation of influent constituents. The results of the FY19 update to influent volume forecasts shows: 1) the influent volume of 29,000 L should continue to be used as the project design-basis; 2) There have been no material changes in the operational processes that would change the constituents of concern from either a treatment or material compatibility perspective.
The DOE Meteorological Coordinating Council (DMCC) conducted an initial Los Alamos National Laboratory (LANL) meteorological program Assist Visit in August 2006 and several observations and recommendations were shared with LANL management (DMCC 2006). In August 2015, a follow-up meteorological program Assist Visit was conducted to determine progress in meeting all the observations and recommendations from the prior Assist Visit (DMCC 2015). During the 9 years between these two Assist Visits, DMCC noted that significant program improvements were made, and these were noted in the 2015 Assist Visit observations and recommendations
The weapons program at Los Alamos National Laboratory is described.
The United States Department of Energy (DOE) has standard metering requirements of commercial buildings for optimizing energy performance. The guiding principles are to continuously track and optimize energy performance and install building-level meters for electricity, natural gas, and steam. Some buildings at Los Alamos National Laboratory (LANL) have physical submeters monitoring their energy consumption, but these meters have proven to be unreliable. And, in most cases, replacing them has proven to be a slow process. Installing new submeters also requires a temporary lockout of the circuit on which they are being installed. Many buildings at LANL contain laboratories with ongoing experiments or data centers, which makes an equipment power outage nearly impossible to plan. This inability to plan power outages results in long-term submeter failures. Although most submeters are eventually replaced, failures lead to missing consumption data for some unpredictable, extended time. A building automation system (BAS) is a system that provides control and monitoring on a building to maintain the operational performance of the building and occupancy comfort. Many buildings at LANL currently have a BAS, and all new renovations and installs will include installing a BAS if one does not already exist. The intended purpose for a BAS is primarily to monitor the health and efficiency of a building; however, it is also possible to calculate equipment power and energy consumption using BAS information. This project aims to use virtual meters to monitor building energy consumption as a cost-effective and minimally labor-intensive alternative to installing physical submeters. The fault detection and diagnostics tool, SkySpark, provides a centralized database for all the data from the various BAS that are active at LANL. This data includes the information that is needed to create virtual meters for heating, ventilating, and air conditioning (HVAC) systems in most buildings, including heating and cooling loads. 9 This report begins with a detailed summary of the project, including the reasoning, procedure, and results. The specific processes of creating the various virtual meters are then identified. Then the limitations are discussed. And, lastly, the results and future potential are presented.
The purpose of this document is to describe the processes for identifying, communicating, and implementing environmental requirements at the Los Alamos National Laboratory (LANL) for Triad National Security, LLC (Triad). References to LANL or the Laboratory refer to the Department of Energy, National Nuclear Security Administration (DOE/NNSA) managed portion of LANL. References to the Prime Contract refer to the contract between DOE/NNSA and Triad and does not apply to the portion of Technical Area 54 now managed and operated by DOE Environmental Management (EM-LA).
Topics covered include: Our Science; Guiding Principle of Los Alamos; LANL the Design Laboratory; Weapons Mission; Science, Engineering and Computations; Future Weapons Program R&D; NNSA; Aging Weapons; A Final Thought; and, Questions and Answers.
In 1996, negotiations between the National Nuclear Center of the Republic of Kazakhstan (NNC), the U.S. Defense Special Weapons Administration (DSWA) and the U.S. Department of Energy led to an agreement for a joint series of experiments at the former Soviet nuclear test site Semipalatinsk (STS). These experiments had a dual purpose: to close holes and tunnels originally created for the purpose of testing nuclear weapons, and to characterize explosive sources at a former nuclear test site. This report covers the recovery of legacy data from the experiments conduct in 1997 and 1998. Two teams collected data. Los Alamos National Laboratory (LANL), in collaboration with the NNC, collected the near-source (local) data out to approximately 20 km. Lamont-Doherty Earth Observatory (LDEO), with funding from Lawrence Livermore Laboratory (LLNL), also in collaboration with NNC, collected regional data, 200 – 1000 km distant, leveraging the KZ regional seismic network that LDEO had recently installed in collaboration with NNC. The two teams also worked together to some extent, regarding instrumentation and planning. This report primarily addresses the near-source data collected by the LANL/NNC team.
From the first nuclear reactor to the weapon development to the bomb delivery in war, Harold Agnew was there. The only two atomic bombs to ever be used in combat – Little Boy, a uranium gun-type weapon, and Fat Man, a plutonium implosion weapon – were released above Japan 75 years ago on Aug. 6 and Aug. 9, respectively. World War II ended not long after. And, according to The New York Times, Agnew was the only person to witness the whole undertaking, from reactor to Hiroshima: Years earlier, on a frigid December day in 1942 in Chicago, a 21-year-old Agnew was one of a few dozen gathered to see atoms split in two. Not long after, Agnew came to Los Alamos as a graduate student to work on the development the atomic bomb. Then, on Aug. 6, 1945, Agnew was a part of the delivery of Little Boy; he flew as a scientific member on the mission to Hiroshima to film the mushroom cloud and measure the shockwave. It is the only existing footage of the Hiroshima bombing from the air; other footage was taken, but was most likely not handled properly and was unusable, according to Agnew.
Paul Tibbets Jr., the pilot of the Enola Gay who released the Little Boy atomic bomb above Hiroshima, is part of a family with a legacy of military service. He was father to Paul Tibbets III, who served in the military as an Army reservist pharmacist and hospital administrator and eventually retired as a colonel. His son— grandson of Tibbets Jr.—is also Paul Tibbets. Paul Tibbets IV is a retired Air Force brigadier general and decorated bomber pilot. This legacy is not lost on his fellow airmen. They gave Tibbets IV the callsign “Nuke” early in his flying career. Tibbets IV flew the B-1 bomber and then the B-2 stealth bomber, a nuclear-capable, longrange strike aircraft. His 29 years of military service include combat missions in the Middle East, Afghanistan, and the Balkans—and a flight in a restored B-29 with his grandfather. In commemoration of the 75th anniversary of the atomic bombs and his grandfather’s historic role, Tibbets IV spoke with Los Alamos National Laboratory.
Hours before the sun would rise over Tinian island on the morning of August 6, 1945, a B- 29 airplane was positioned above a specially built bomb-loading pit, as crews readied it with cargo unlike anything the world had ever known. Preparations on the tiny Pacific island—nearly 6,600 miles from Los Alamos and about 1,500 miles from its intended target in Japan—had begun months before on April 3. And months before that, pilot Paul Tibbets Jr. and his crew had practiced dropping dummy concrete bombs on targets in Utah. Even years before that, development of this cargo destined for Japan began in secrecy under the direction of a physicist and an Army general in the mountains of Northern New Mexico. It was all leading to one day that would help end years of bloodshed and change the world forever.
The end of Moore’s Law and Dennard Scaling has produced a renaissance in the field of computer architecture. Unable to continue leveraging silicon-level processor improvements to further enhance performance and scalability, system architects have been forced to explore other options. In this new era of heterogeneous architectures and hardware/software codesign, a new class of devices known as “accelerators” has emerged. Independently designed for optimized execution of distinct workloads, these devices have proven critical to the continued advancement of application performance. SmartNICs, accelerator devices integrated with a network controller, have conventionally been utilized to offload low-level networking functionality. However, newer SmartNIC variants, which incorporate a system-on-chip (SoC) with traditional designs, are challenging this precedent. Leveraging significantly augmented resources, these new devices offer increased versatility and the potential to more effectively complement a given architecture’s CPU. In this talk, we introduce the motivation underlying acceleration, explore the fundamentals of SmartNICs, and discuss traditional use cases. We also detail our initial efforts to investigate the feasibility and benefits of SmartNICs as general-purpose accelerators. We present the OpenSNAPI project created to define a uniform application programming interface (API) for this emerging class of devices. Finally, we provide a brief tutorial regarding development of SmartNIC-accelerated applications on Los Alamos National Laboratory’s SmartNIC-enabled platforms.
Seventy-five years later, the Trinity test of July 16, 1945 is still rightly remembered as a monumental scientific achievement. The test has a multifaceted legacy representing incredible discovery, unparalleled hope and unprecedented peril. The weapons designed and tested at wartime Los Alamos were not intended to deter, but to destroy: On August 6, 1945, the world’s first weaponized nuclear device was used for that very purpose. Little Boy, a gun-assembled enriched uranium weapon, detonated over Hiroshima that morning destroying several square miles of the city and killing tens of thousands. Three days later, Fat Man, an imploding plutonium weapon, destroyed Nagasaki. On August 14, an armistice was declared and a few weeks later World War II came to an official end. We’ve all heard these historical facts before, but was it really that simple? Nuclear strike + nuclear strike = unconditional surrender? Bringing World War II to an end was an arduous, complex, and very tenuous undertaking with important historical nuances to consider.
It’s a well-kept secret that laundry detergents are harmful to the environment. The important chemical in laundry detergent, called a surfactant. Surfactants are the workhorses of laundry detergent and soaps, and they're attracted to things like grease on your hands and dirt in your clothes to wash them away. Surfactants are used in everything from shampoo, hand soap, laundry detergent, and cosmetics. Many current surfactants are made from petroleum feedstock. These petroleum-derived building blocks come with a big carbon footprint. As the need for greener feedstock alternatives for synthesizing surfactants became obvious, manufacturers turned to natural oils, such as palm kernel and coconut oil. However, these oils are costly, particularly in areas where they are not domestically produced, and using them for surfactant synthesis competes with the food supply chain. Surfactants deactivate and do not work in hard water. Hard water is common - 85% of the U.S. water supply is considered hard because of the presence of small metal ions. These metal ions cover the surfactants making them useless. To solve this problem, many manufacturers add chemicals called chelators to bind the metal ions and make the water less hard, enhancing the effectiveness of the laundry detergent. However, this solution leads to more problems, including increased cost of detergent production and a large output of environmentally harmful chemicals. There remains a strong need for effective laundry detergents that do not negatively impact the environment and are available to consumers at an affordable cost. The American Cleaning Institute (ACI), a surfactant manufacturer organizing body, is emphasizing commitment to developing bio-renewable alternatives to current surfactants in laundry detergents. That’s why chemists at SIRONIX Renewables partnered with Los Alamos National Laboratory to further develop Oleo-furan surfactants (OFS). OFS are a new class of non-toxic, non-irritating surfactants for laundry detergent. It is the only surfactant that performs effectively in cold and hard water without chelators to bind the metal ions in hard water. OFS can be produced readily from sustainable, bio-derived molecules. They are multi-functional molecules - performing the role of a surfactant and a chelator in one - and are completely bio-degradable. OFS does not rely on petroleum feedstock and is synthesized from non-food, bio-renewable cellulosic feedstock. OFS solves each of the pertinent problems facing detergents and our environment today.