Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ir”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Algorithm for automatic atmospheric corrections to visible and near-IR satellite imagery

An algorithm for automatic atmospheric correction of satellite imagery of the earth's surface is proposed which is applicable to low-resolution and high-resolution imagery of land areas. The algorithm is based on the satellite image being corrected and on the climatology of the area, and it requires that some pixels in the image correspond to dense dark vegetation as the surface cover. The algorithm is sensitive to the assumed reflectance of the dense dark vegetation, and the accuracy of the corrected surface reflectance is expected to be + or - 0.01. Using the method, aerosol optical thicknesses were derived from clear and hazy Landsat MSS images in the Washington, D.C. and Chesapeake Bay region, and the results are found to agree well with simultaneous sunphotometer ground measurements.

Kaufman, Yoram J.↗

New advances in non-dispersive IR technology for CO2 detection

This paper discusses new technology developments in CO2 detection using Non-Dispersive Infrared (NDIR) techniques. The method described has successfully been used in various applications and environments. It has exhibited extremely reliable long-term stability without the need of routine calibration. The analysis employs a dual wavelength, differential detection approach with compensating circuitry for component aging and dirt accumulation on optical surfaces. The instrument fails 'safe' and provides the operator with a 'fault' alarm in the event of a system failure. The NDIR analyzer described has been adapted to NASA Space Station requirements.

Small, John W.↗

Estimation of regional surface resistance to evapotranspiration from NDVI and thermal-IR AVHRR data

Infrared surface temperatures from satellite sensors have been used to infer evaporation and soil moisture distribution over large areas. However, surface energy partitioning to latent versus sensible heat changes with surface vegetation cover and water availability. The hypothesis that the relationship between surface temperature and canopy density is sensitivite to seasonal changes in canopy resistance of conifer forests is presently tested. Surface temperature and canopy density were computed for a 20 x 25 km forested region in Montana, from the NOAA/AVHRR for 8 days during the summer of 1985. A forest ecosystem model, FOREST-BGC, simulated canopy resistance for the same period. For all eight days, surface temperatures had high association with canopy density, measured as Normalized Difference Vegetation Index, implying that latent heat exchange is the major cause of spatial variations in surface radiant tmeperatures.

Nemani, Ramakrishna R.↗

IR optical fiber-based noncontact pyrometer for drop tube instrumentation

The design of a two color pyrometer with infrared optical fiber bundles for collection of the infrared radiation is described. The pyrometer design is engineered to facilitate its use for measurement of the temperature of small, falling samples in a microgravity materials processing experiment using a 100 meter long drop tube. Because the samples are small and move rapidly through the field of view of the pyrometer, the optical power budget of the detection system is severly limited. Strategies for overcoming this limitation are discussed.

May, R. G.↗

NCTM workshop splinter session, IR thermal measurement instruments

The splinter session dealing with commercial industrial thermal measurement state-of-the-hardware had a total attendance of 15. Two papers were presented in the splinter session as follows: (1) Development of an Infrared Imaging System for the Surface Tension Driven Convection Experiment, Alexander D. Pline, NASA LeRC; (2) A Space-qualified PtSi Thermal Imaging System, Robert W. Astheimer, Barnes Engineering Div., EDO Corp. In addition a brief description of SPRITE detector technology was presented by Richard F. Leftwich of Magnovox. As anticipated, the discussions were concerned mainly with thermal imaging figures of merit rather than those for point measurement instruments. The need for uniform guidelines whereby infrared thermal imaging instruments could be specified and evaluated was identified as most important, particularly where temperature measurements are required. Presently there are differences in the way different manufacturers present significant performance parameters in their instrument data sheets. Furthermore, the prospective user has difficulty relating these parameters to actual measurement needs, and procedures by which performance can be verified are poorly defined. The current availability of powerful thermal imaging diagnostic software was discussed.

Kaplan, Herbert↗

IR line emission from dense photodissociation regions

The results of the study on the molecular and fine structure line emission, from dense photodissociation regions, are discussed. The work is focused on the prediction of the line emission from CO and H2 molecules. It is found that, when the gas density is sufficiently high, self-shielding of the molecules can move the C(+)/CO and H/H2 transitions close to the surfaces of the molecular cloud where they can feel the full effect of heating by the ultraviolet radiation field. Collisional de-excitation of the H2 can move the lower levels towards low temperature emission producing an apparently shocked line ratio for two low-J levels, while the high-J levels retain a fluorescent value. Appreciable emission in high-J CO molecules originates in this warm molecular gas. Comparison with observation suggests that high density clumps are a common phenomena in photodissociation regions.

Burton, M.↗

IR line emission from supernovae in molecular clouds

The absorption of the x rays from a supernova explosion in the surrounding molecular gas is discussed. A supernova explosion in a molecular cloud results in a supernova remnant which radiates a fraction of the approximately 10 to the 51st power erg kinetic energy of the supernova explosion in the form of x rays. The absorption of these x rays in the surrounding molecular gas produces ionization, dissociation, and heating. It is found that a 10(exp 51) erg supernova explosion in a uniform molecular cloud of density equal to 1000 per cubic centimeter results in the emission of photons in the H2 line. This process may contribute appreciably to the strong S(1) line emission seen from some starburst galaxies, such as NGC 6240.

Draine, B. T.↗

Requirements of IR space astronomy

An introduction to a series of infrared detector technology workshops is given. The establishment of goals and new requirements is addressed in a general way. The Shuttle Infrared telescope Facility (SIRIF) goals are listed. Given that the wavelength coverage is established at 2 to 750 microns and the unvignetted field of view is 7 arcmin, the field should be fully utilized at each wavelength, diffraction should be critically sampled, and each detector should be background limited.

Low, Frank J.↗

Common source cascode amplifiers for integrating IR-FPA applications

Space based astronomical infrared measurements present stringent performance requirements on the infrared detector arrays and their associated readout circuitry. To evaluate the usefulness of commercial CMOS technology for astronomical readout applications a theoretical and experimental evaluation was performed on source follower and common-source cascode integrating amplifiers. Theoretical analysis indicates that for conditions where the input amplifier integration capacitance is limited by the detectors capacitance the input referred rms noise electrons of each amplifier should be equivalent. For conditions of input gate limited capacitance the source follower should provide lower noise. Measurements of test circuits containing both source follower and common source cascode circuits showed substantially lower input referred noise for the common-source cascode input circuits. Noise measurements yielded 4.8 input referred rms noise electrons for an 8.5 minute integration. The signal and noise gain of the common-source cascode amplifier appears to offer substantial advantages in acheiving predicted noise levels.

Woolaway, James T.↗

IR spectral characteristics of cirrus clouds

The recent focus of parameterization of the radiative properties of clouds has been to include the microphysical properties of the cloud. A variety of parameterization have been developed for both the shortwave and the longwave. In parameterizing the longwave properties of clouds, it is useful to consider the two stream solution of the radiative transfer equation appropriate for a thermal source. These radiative transfer equations are considered.

Ackerman, Steven A.↗

On the use of IR lidar and K(sub a)-band radar for observing cirrus clouds

Advances in lidar and radar technology have potential for providing new and better information on climate significant parameters of cirrus. Consequently, the NOAA Wave Propagation Lab. is commencing CLARET (Cloud Lidar And Radar Exploratory Test) to evaluate the promise of these new capabilities. Parameters under study include cloud particle size distribution, height of cloud bases, tops, and multiple layers, and cloud dynamics revealed through measurement of vertical motions. The first phase of CLARET is planned for Sept. 1989. The CO2 coherent Doppler lidar and the sensitive K sub a band radar hold promise for providing valuable information on cirrus that is beyond the grasp of current visible lidars.

Eberhard, Wynn L.↗

Near-IR imaging and imaging polarimetry of OMC 2

NIR and 2.2-micron imaging polarimetry of the molecular cloud region OMC 2, reveals a cluster of low- to intermediate-mass premain-sequence stars embedded in circumstellar disks. The 2.2-micron imaging polarimetry indicates that the compact NIR sources OMC 2 IRS1, IRS2, IRS3 and IRS4 N, are illumination centers for the surrounding extended emission. By application of Hubble's relation to the nebulae illuminated by IRS1, IRS2 and IRS4 N, the illuminating geometry is explained and the intrinsic NIR colors of these objects are estimated.

Rayner, John↗

NGC 1614 - An IR-luminous merger but not (yet?) an active galaxy

New observations of the merging galaxy NGC 1614 are described. The system has a nuclear region of QSO-like luminosity, but shows no direct evidence for an active nucleus. It is heavily and unevenly reddened across its nucleus, while infrared imaging also shows a 'ridge' of dust. The inner spiral structure of the galaxy has normal rotation for an inclined disk, as indicated by the H-alpha emission. A linear 'tail' to the S and extended arms to the E have more positive velocities, and probably are the remains of an interacting companion and the tidal plume(s) caused by the collision. The only H I seen in emission appears to coincide with bright knots of H-alpha and forbidden O III emission of the base of the tail. The lack of direct evidence for an active nucleus indicates that if NGC 1614 is a precursor to a Seyfert-like system the AGN has not yet turned on.

Neff, S. G.↗

On the far-IR and sub-mm spectra of spiral galaxies

Photometric measurements of three Virgo cluster spirals (NGC4254, NGC4501, and NGC4654) at 160-microns (far-infrared) and 360-microns (submillimeter) wavelengths are compared with theoretical models and observations at other wavelengths. It is shown that the data at the observed wavelengths do not fit any of interstellar dust grain models very well; four possibilities are given in order to explain discrepancies: the observed wavelength points are incorrect; previously observed data is incorrect; both data are incorrect; and the premise of the analysis is incorrect - a composite far-infrared spectrum of normal spiral galaxies is meaningless because they vary considerably in their far-infrared properties. It is also noted that the observed data are inconsistent with models having large cold grains.

Stark, A. A.↗

Ground-based thermal IR images of Comet Tempel 2

The 10.8-micron images of Comet Tempel 2 obtained on the four days from September 21 to 24, 1988, indicate that the dust coma contributed about half of the nuclear pixel brightness. The nuclear condensation brightness exhibited a temporal variability slightly larger than observational uncertainty. The structure of the observed extended dust emission is interpretable as (1) a large grain tail primarily generated by cm-scaled particles, (2) the result of an outburst near 2.5-3.0 AU perihelion, and (3) a sunward emission of dust in a fanlike pattern.

Campins, Humberto↗

Tunable far-IR laser spectroscopy of jet-cooled carbon clusters - The nu-2 bending vibration of C3

Seven rovibrational transitions of the (01/1/0)-(00/0/0) fundamental bending band of C3 have been measured with high precision with the use of a tunable far-infrared laser spectrometer. The C3 molecules were produced by laser vaporization of a graphite rod and cooled in a supersonic expansion. The astrophysically important nu-2 fundamental frequency is determined to be 63.416529(40)/cm. These measurements provide the basis for studies of C3 in the interstellar medium with far-infrared astronomy.

Schmuttenmaer, C. A.↗

NOAA-11 AVHRR visible and near-IR inflight calibration

An inflight calibration method for NOAA-11 AVHRR visible and near-infrared bands using desert reflectance is discussed. The results show a decrease in sensor systems response of 22 percent and 32 percent for the visible and near-infrared bands, respectively, relative to the published preflight calibration. The relative accuracy of the present calibration to the calibration of NOAA-9, published elsewhere, is + or - 3 percent. The absolute accuracy is around + or - 6 percent. An approximate correction to the Normalized Difference Vegetation Index ratio suggests that an increase of 0.06 is required.

Holben, B. N.↗

High spatial resolution studies of galaxies in the far IR: Observations with the KAO, and the promise of SOFIA

NASA, in collaboration with the West German Science Ministry (BMFT), plans a larger airborne telescope as a successor to the Kuipper Airborne Observatory (KAO) that will achieve these goals. The Stratospheric Observatory for Infrared Astronomy (SOFIA) is entering the final stages of Phase B review with targeted new start early in the next decade. SOFIA is a 2.7 m diameter telescope that is carried in a Boeing 747SP. In addition to having 3 times the spatial resolution of the KAO, and 10 times the light gathering power, it will incorporate improvements over the KAO in lower optical emissivity and better telescope tracking stability. The thin primary mirror will equilibrate quickly to ambient temperature at an altitude which, accompanied by airflow improvements across the telescope cavity, will result in better image quality. The sensitivity of SOFIA will allow us to see a large number of typical bright galactic HII regions in local group galaxies. The spatial resolution of 8 seconds (full width half maximum Airy disk) at 100 microns will allow these regions to be measured independently, if they are distributed similarly to those in our own galaxy. At this spatial resolution, the disks of normal galaxies will be easily resolved out to distances of several hundred Mpc. This portion of space includes many of the superluminous galaxies discovered by the Infrared Astronomy Satellite (IRAS), and this spatial scale is relevant for studies of the morphology of regions of interaction among the majority of these galaxies that are members of colliding pairs.

Lester, Dan F.↗