Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interview”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Deployment of Wind Turbines in the Built Environment: Risks, Lessons, and Recommended Practices

Built-environment wind turbine (BEWT) projects are wind energy projects that are constructed on, in, or near buildings, as shown below. These projects present an opportunity for distributed, low-carbon generation combined with highly visible statements on sustainability, but the BEWT niche of the wind industry is still developing and is relatively less mature than the utility-scale wind or conventional ground-based distributed wind sectors. This poster investigates the current state of the BEWT industry by reviewing available literature on BEWT projects as well as interviewing project owners on their experiences deploying and operating the technology.

17 WIND ENERGY↗

Career Corner: Pitching Your Contributions at the Right Level

Whether it is in a job interview, a presentation or in collaborations with colleagues with differing technical backgrounds, effectively conveying your ideas and contributions is at least as important as the content. Daniel Goleman speaks to the importance of emotional intelligence being a key driver of success and advancement. Why does this matter so much? If you dive right into technical details without providing a broader context and motivation for the problem, then the people with whom you are communicating will not appreciate the contribution. If you talk only about your ideas at a high level with insufficient detail, then the weight of your contributions might be undervalued or misinterpreted.

99 GENERAL AND MISCELLANEOUS↗

Performance, Cost, and Financial Parameters of Geothermal District Heating Systems for Market Penetration Modeling under Various Scenarios

Geothermal district heating (GDH) systems have limited penetration in the U.S., with an estimated installed capacity of only 100 MWth for a total of 21 sites. We see higher deployment in other regions, for example, in Europe with an installed capacity of more than 4,700 MWth for 257 GDH sites. The U.S. Department of Energy Geothermal Vision (GeoVision) Study is currently looking at the potential to increase the deployment in the U.S. and to understand the impact of this increased deployment. This paper reviews 31 performance, cost, and financial parameters as input for numerical simulations describing GDH system deployment in support of the GeoVision effort. The focus is on GDH systems using hydrothermal and Enhanced Geothermal System resources in the U.S.; ground-source heat pumps and heat-to-electricity conversion technology were excluded. Parameters investigated include 1) capital and operation and maintenance costs for both subsurface and surface equipment; 2) performance factors such as resource recovery factors, well flow rates, and system efficiencies; and 3) financial parameters such as inflation, interest, and tax rates. Current values as well as potential future improved values under various scenarios are presented. Sources of data considered include academic and popular literature, software tools such as GETEM and GEOPHIRES, industry interviews, and analysis conducted by other task forces for the GeoVision Study, e.g., on the drilling costs and reservoir performance.

15 GEOTHERMAL ENERGY↗

Accelerator-driven Medical Sterilization to Replace Co-60 Sources

This report documents the results of a study prepared at the request of the Office of Radiological Security of the National Nuclear Security Administration (NNSA), as part of the Domestic Protect and Reduce mission by the Illinois Accelerator Research Center (IARC) of Fermi National Accelerator Laboratory. The study included a literature survey of over 80 relevant documents and articles including industry standards, regulatory documents, technical papers, a court case, previous task force reports and industry white papers. The team also conducted interviews or had conversations with over 40 individuals representing over a dozen organizations over the course of its 10-month program. This report summarizes our findings, addresses the specific questions posed to us by NNSA, and concludes with a list of actionable recommendations.

43 PARTICLE ACCELERATORS↗

Chasing Down Gravitational Wave Sources with the Dark Energy Camera

On August 17, 2017, scientists using the Dark Energy Camera tracked down the first visible counterpart to a gravitational wave signal ever spotted by astronomers. Using data provided by the LIGO and Virgo collaborations, scientists embarked on a quest for the unknown, and discovered a new wonder of the universe. Includes interviews with Fermilab’s Jim Annis and Brandeis University’s Marcelle Soares-Santos.

79 ASTRONOMY AND ASTROPHYSICS↗

Designing a Successful Transportation Project: Lessons Learned from the Clean Cities American Recovery and Reinvestment Act Projects

The largest source of funding for alternative fuel vehicle and infrastructure projects in the U.S. Department of Energy's Clean Cities program's history came from the American Recovery and Reinvestment Act (Recovery Act). In 2009, the 25 cost-share projects totaled nearly $300 million in federal government investment. This effort included the involvement of 50 Clean Cities coalitions and their nearly 700 stakeholder partners who provided an additional $500 million in matching funds to support projects in their local communities. In total, those 25 projects established 1,380 alternative fueling stations and put more than 9,000 alternative fuel and advanced technology vehicles on the road. Together, these projects displaced 154 million gasoline gallon equivalents (GGE) of petroleum and averted 254,000 tons of greenhouse gas (GHG) emissions, while supporting U.S. energy independence and contributing to regional economic development. During post-project interviews, project leaders consistently cited a number of key components - ranging from technical and logistical factors, to administrative capabilities - for accomplishing an effective and impactful project. This report summarizes the high-level project design and administrative considerations for conducting a successful transportation project.

arra, doe, recovery act,clean cities, alternative ↗

A Priority-Based View of Future Challenges in International Nuclear Safeguards.

The international nuclear safeguards community is faced with a host of challenges in the coming years, many of which have been outlined but have not been described in terms of their urgency. Literature regarding safeguards challenges is either broad and devoid of any reference to prioritization or tailored to a specific problem and removed from the overall goals of the safeguards community. For example, developing new methods of environmental sampling, improving containment and surveillance (C/S) technologies to increase efficiency and decrease inspection time, advancing nuclear material accountancy (NMA) techniques, and planning safeguards approaches for new types of nuclear facilities are all important. They have not, however, been distinctly prioritized at a high level within the safeguards community. Based on a review of existing literature and interviews with experts on these upcoming challenges, this paper offers a high-level summary of present and future priorities in safeguards, with attention both to what is feasible and to what is most imperative. In doing so, the paper addresses the potential repercussions for failing to prioritize, with a focus on the risk of diversion of nuclear material. Within the context of shifts in the American political landscape, and keeping in mind that nonproliferation issues may take a backseat to others in the near future, a prioritized view of safeguards objectives will be vital. In the interest of expanding upon this work, the paper offers several potential conceptual models for prioritization which can be explored in greater depth upon further research.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Projected Growth in Small-Scale, Fossil-Fueled Distributed Generation: Potential Implications for the U.S. Greenhouse Gas Inventory

The generation capacity of small-scale (less than one megawatt) fossil-fueled electricity in the United States is anticipated to grow by threefold to twenty-fold from 2015 to 2040. However, in adherence with internationally agreed upon carbon accounting methods, the Environmental Protection Agency's (EPA's) U.S. Greenhouse Inventory (GHGI) does not currently attribute greenhouse gases (GHGs) from these small-scale distributed generation sources to the electric power sector and instead accounts for these emissions in the sector that uses the distributed generation (e.g., the commercial sector). In addition, no other federal electric-sector GHG emission data product produced by the EPA or the U.S. Energy Information Administration (EIA) can attribute these emissions to electricity. We reviewed the technical documentation for eight federal electric-sector GHG emission data products, interviewed the data product owners, collected their GHG emission estimates, and analyzed projections for growth in fossil-fueled distributed generation. We show that, by 2040, these small-scale generators could account for at least about 1%- 5% of total CO2 emissions from the U.S. electric power sector. If these emissions fall outside the electric power sector, the United States may not be able to completely and accurately track changes in electricity-related CO2 emissions, which could impact how the country sets GHG reduction targets and allocates mitigation resources. Because small-scale, fossil-fueled distributed generation is expected to grow in other countries as well, the results of this work also have implications for global carbon accounting.

54 ENVIRONMENTAL SCIENCES↗

The Wind Energy Workforce Gap in the United States

There are more than 100,000 jobs in the U.S. wind industry today, and the second-fastest growing job in the United States in 2017 was wind technician. A vibrant wind industry needs workers, and students who graduate from wind energy education and training programs need jobs. The goal of this research is to better understand the needs of wind-related businesses, education and training requirements, and the make-up of current and future domestic workforces. Educators are developing and training future workers. Educational institutions need to know which courses to provide to connect students with potential employers and to justify their wind energy programs by being able to place graduates into well-paying jobs. In interviews with 250 wind energy firms and 50 educational institutions, many respondents reported difficulty hiring qualified candidates, while many educational institutions reported graduates not finding jobs in the wind industry. We refer to this mismatch as the 'workforce gap.' This conference poster explores this gap.

17 WIND ENERGY↗

Idaho National Laboratory Radioisotope Power Systems Nuclear Operations: Readiness Assessments Supporting a Nuclear-enabled NASA Mission

Idaho National Laboratory Radioisotope Power Systems Nuclear Operations: Preparations, Documentation, Readiness Assessments and Conduct of Operations Supporting a Nuclear-enabled NASA Mission Kelly L. Lively, Eric S. Clarke, Robert P. Gomez Idaho National Laboratory, Idaho Falls, ID 83415 208-533-7388; Kelly.Lively@inl.gov Abstract. The Radioisotope Power Systems (RPS) Program, located at Idaho National Laboratory (INL), is responsible for assembling, testing, and delivering plutonium oxide-fueled RPSs for use in powering missions in remote, harsh environments such as deep space. An informative presentation will be given discussing the preparations, documents, readiness assessments, human capital and conduct of operations involved in performing nuclear operations to support providing these systems to end users for the Department of Energy (DOE). DOE is the start-up authority for performing nuclear operations. Readiness for start-up is determined through independent assessment against established acceptance criteria to ensure activities can be performed safely and within a well defined nuclear safety envelope. There is also an RPS Program approval element requiring additional readiness review before nuclear operations can begin. The programmatic readiness review is performed to ascertain readiness to proceed with nuclear operations from the perspective of product quality. The assessments and reviews are conducted in series in the following order of progression: Management Self Assessment (MSA), Contractor Readiness Assessment (CRA), DOE Readiness Assessment (DOE RA) and lastly, the Programmatic Production Readiness Review (PRR). The CRA, DOE RA, and PRR requires an independent technical review team. Twelve assessment criteria are reviewed and a selection of the criteria is identified for review on a graded approach. Typically, the assessments/review criteria requires, at a minimum, review of operating instructions to ensure technical safety requirements are adequately identified, review of training records to ensure personnel are adequately trained to perform the specified work scope, personnel are interviewed to determine adequacy of level of knowledge for work scope, and a high-fidelity performance of the operation to ensure the operating instructions and conduct of operations are adequate to perform the work scope. As each assessment/review is conducted a formal report delineating any issues in the form of findings, observations, and noteworthy practices will be issued. Before start-up approval is obtained all issues must be resolved to the satisfaction of the individual teams. Start-up notification is formally communicated by memorandum from DOE. Programmatic approval is documented in a Segmented Readiness Review where vested Program representatives in the RPS community (to include DOE NE 75 and DOE ID representatives) ensure personnel, documentation, and materials are in place to perform the activity. The four assessments/reviews can be completed in a 16-week period of time, provided ample resources and a relatively small work scope is identified. RPS assembly and testing operations to support the Mars 2020 Mission, the next planned space mission using a nuclear power system, will require about of year of assessments/reviews before the nuclear operations are performed. Keywords: INL, Operations, Assessments, DOE

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Beyond Widgets: Validated Systems Energy Savings and Utility Custom Incentive Program Systems Trends

Energy efficiency upgrades to buildings to date through avenues such as utility incentive programs have been largely limited to component-based products (e.g., lamps, RTUs). While some utilities do provide ‘custom’ incentive programs with whole building and system level technical assistance, these programs require deeper levels of analysis, resulting in higher program costs. This results in custom programs being restricted to utilities with greater resources, and are typically applied mainly to large or energy-intensive facilities, leaving much of the market without cost effective access and incentives for these solutions. In addition, with increasingly stringent energy codes, cost effective component-based solutions that achieve significant savings are dwindling. Integrated building systems (e.g., integrated façade, HVAC and/or lighting solutions) can deliver higher savings (Regnier et al. 2017) that translate into large sector-wide savings if deployed at the scale of these programs. However, systems application poses a number of challenges – energy savings assessments are inherently more complex and are not easily suited to the deemed measure model, and implementation of systems can be more disruptive. This paper presents the outcomes of a project to develop validated utility incentive program packages for three specific integrated building systems, in collaboration with ComEd, a consortium of California Public Owned Utilities (CA POUs) (Northern California Power Agency(NCPA) and the Southern California Public Power Authority(SCPPA)), and Xcel Energy (CO, MN). Previous work described the potential for energy savings of these systems at the individual and market level, early test findings for the task-ambient lighting system, and described the work products to develop utility incentive programs (Regnier et al. 2016). This paper presents validated end use energy savings of all three systems showing energy savings of ~20% for automated shading combined with daylight dimming (does not include light fixture retrofit savings); 30-46% for task-ambient lighting systems combined with plug load occupancy controls, depending on technology package and office building size (no daylight dimming impacts); and ~94% in the south-façade daylit zone for workstation specific lighting systems with daylight dimming (including lighting retrofit and task tuning). Using a U.S. Department of Energy (DOE) reference building model (DOE 2018), this translates to whole building savings of 2-5% (large-medium commercial), 12-23% (large-small commercial), and 13-15% (medium-large commercial) for these systems respectively. Early findings from the utilities in deploying these systems through their incentive programs indicate that deployment methods such as direct install programs might be best suited for these integrated systems. Further, early findings from a scoping study across custom utility programs and federal retrofit programs indicate that component level retrofits are still prevalent even in these programs, pointing towards an opportunity for deeper energy savings deployment. High performance retrofit case studies demonstrate that deeper energy savings is possible through integrated approaches. Market stakeholder interviews indicate however that there is generally a low level of awareness of the potential for energy savings of these three integrated systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Review of City Energy and Emissions Analysis Needs, Methods, and Tools

Currently over $300B is spent in US city economies to pay for energy. Many US cities are taking leading roles in exploring and promoting activities to improve energy efficiency and reduce green house gas (GHG) emissions. This paper summarizes a series of interviews with several leading cities regarding their needs, methods and tools they are using to model energy use and evaluate policies to reduce GHG. We also present a review of several analysis tools evaluated and used to explore urban scale design scenarios for two new major developments in the San Francisco area. We found that cities face great challenges managing data on their building stock, obtaining energy use data, and evaluating the different tools that are available to them. There is a need for better data management systems that allow tools to be more interoperable. The wide variety and features of today’s tools, and the fact that many of them are not open data models, create sub-optimal environments to conduct the energy analysis many cities are seeking to conduct.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Hydrothermal Exploration Best Practices and Geothermal Knowledge Exchange on OpenEI

Though exploring for hydrothermal resources is not new, advances in exploration technologies and the pursuit of less visible resources have created a need to outline exploration best practices. This multi-year study outlines 21 geothermal exploration regions in the Western United States. These regions were developed based on the U.S. Geological Survey (USGS) physiographic regions, then adjustedto fit geothermal parameters such as differences in geologic regime, structure, heat source, surface effects (weather, vegetation patterns, groundwater flow), and other relevant factors. Literature searches were conducted in each of these 21 regions for the application of field reconnaissance, geochemical, geophysical and remote sensing techniques. At this time, data from more than 250 referenceshave been cataloged in U.S. Department of Energy's (DOE) OpenEnergy Information (OpenEI, http://en.openei.org) website, which allows industry to access data information and run analyses on specific data attributes. The platform also allows updates, edits, and additions from the public so that the dataset can be expanded as industry's knowledge grows. In addition to the literature survey,interviews were conducted with exploration experts with both geothermal and oil-and-gas industry experience to identify the exploration challenges and best practices for the exploration regions. This paper defines and describes the geothermal regions developed for this study, describes how exploration techniques contribute to hydrothermal analyses (structural, petrologic, temperature, andhydrologic), and defines the exploration hurdles and best practices for each region. The results of the study and accompanying data sets on OpenEI will be available through the National Geothermal Data System.

15 GEOTHERMAL ENERGY↗

WBS 4.1.2.31 Bioproduct Transition System Dynamics

Bioproducts are chemicals derived from a biomass feedstock; they can be produced on their own or as co-products of a biorefinery that also produces biofuels. Bioproducts have historically been difficult to scale up and bring to market, despite a broad understanding developed within BETO of the various conversion processes that can be used to produce bioproducts. Expanding the bioproducts industry by bringing more bioproducts to market would have a variety of positive impacts. Growth in the bioproducts industry would support the biofuels industry by enabling biorefinery co-products that yield additional revenue streams, allowing biofuel selling prices to be reduced and expanding the biofuels market. A larger bioproducts industry also has the potential to reduce carbon and other emissions associated with the U.S. chemical sector and contribute to increased price stability in some areas of the chemical market by shifting portions of the chemical sector away from reliance on fossil feedstocks. The key barrier to realizing these positive impacts is a lack of knowledge around the factors that prevent or enable bioproducts to reach the commercial market. To date, there has been essentially no research done on how successful bioproducts (commercially produced bioproducts that have captured market share) become successful, why failed bioproducts fail, and what the similarities and differences are between successful and failed bioproducts. The current project addresses this knowledge gap with a decision support tool that can be used by investors, technology developers and government agencies to bring more bioproducts to market, thereby simultaneously growing the bioproducts and biofuels industries. Development of the decision support tool was based on research on the technology development process and success rates in analogous industries, data gathered during previous BETO-funded projects, and a series of interviews with subject-matter experts within BETO, the bioproducts industry, and the investment community. This information formed a knowledge base around how bioproducts are developed from applied research to commercial scale was assembled, which was used to build the Bioproduct Transition Dynamics (BTD) model, a system dynamics (SD) model that tracks bioproduct development projects from applied research through the 'valley of death' of piloting and demoing to commercial scale production. The end-of-project goal is to release the BTD, along with supporting documentation, as a transparent open-source model that will inform decisions around bioproduct development and investments and enable more bioproducts to reach the market. The BTD takes as inputs techno-economic data on specific bioproducts, behavioral parameters for developers and investors, expectations around government support, and exogenous market factors. Model outputs include bioproduct technological progress over time, a cash flow statement for the development project, and market share estimates. Following initial model development, a sensitivity analysis was performed on a subset of model inputs to determine, first, if the BTD could be used to answer analysis questions of interest to BETO, and second, which of the inputs considered were most influential on bioproduct success. Results indicate that the BTD can be used to identify scenarios that enable bioproduct development, and that 'soft' or semi-quantitative factors play a large role in determining if a bioproduct will reach the market. A workshop was also held for subject-matter experts and prospective BTD users in July 2018. The workshop covered BTD model logic, input data and assumptions as well as the sensitivity analysis results and a discussion of potential use cases. Workshop feedback was used to identify additional model development tasks and was incorporated into a draft technical report completed in September 2018. BTD model development, validation and application will continue through 2019.

09 BIOMASS FUELS↗

Understanding the Impact of Dynamic Power Capping on Application Progress

Electrical power has become an important design constraint in high-performance computing (HPC) systems. On future HPC machines, power is likely to be a budgeted resource and thus managed dynamically. Power management software needs to reliably measure application performance at runtime in order to respond effectively to changes in application behavior. Execution time tells us little about how the science in the application is progressing toward an application-defined end goal. To the best of our knowledge, no study has defined or categorized online application progress in the context of power management. Based on semi-structured interviews with HPC application-specialists, we define an online notion of progress—an application-specific metric that can be monitored at runtime to provide a sense of the rate at which application science is being performed. Using instrumentation, we characterize and categorize the progress of various production scientific applications and benchmarks. We propose a model of the impact of dynamic power capping on application progress. By experimental evaluation, we show that our model accurately captures the general behavior of the progress of different classes of applications under a power cap. We believe that such a model is an important first step toward the design of more dynamic power management policies for HPC systems.

application progress↗

Cities Topology - Curbs and Parking

Personal vehicles, buses, freight, emerging services (e.g., ride-hailing), and other modes impose several combinations of competing demands for curb space. Therefore, research is needed to better understand impacts and prioritize space allocation - parking, pick-up/drops or PUDOs, commercial zones, bus stops, etc. - to optimize mobility and energy use. This study aims to develop an optimization model to allocate and manage curb space by interviewing experts, analyzing responses to understand curb space key requirements and priorities, link such curb-management practices to mobility and energy productivity, and provide methods suitable for micro-scale analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Nuclear Criticality Safety Lessons Learned in the Design of the Uranium Processing Facility at the Y-12 National Security Complex

The Uranium Processing Facility (UPF) is being built by the National Nuclear Security Administration (NNSA) to replace aging uranium processes at the Y-12 National Security Complex (Y-12 NSC) in Oak Ridge Tennessee. Specifically, the processes housed in building 9212 are being replaced as this facility dates to the World War II Manhattan Project days of Y-12. When the UPF Project is completed it will consist of three main facilities along with several support facilities. The Main Processing Building (MPB) will house oxide production and metal casting operations. The Salvage and Accountability Building (SAB) will house wet chemistry operations (examples include recovery evaporation and calcination of solutions). The Personnel Support Building will be connected to both the SAB and the MPB and will serve as a transition facility for materials and personnel between the two. The MPB will also be connected to the Highly Enriched Uranium Materials Storage Facility (HEUMF) via a connector (HCON) to permit transfers from storage into UPF directly. This paper will summarize some of the more important lessons learned for the NCS practitioner working in a design environment rather than in a production or experimental environment. As the Chief NCS Engineer for the UPF Project I have been responsible for ensuring the technical evaluations produced on the project are high quality, technically accurate, and conform to the Y-12 NCS Program expectations. Ensuring nuclear criticality safety for processes that do not yet exist in reality is a challenge very different than that of ensuring subcriticality for processes in an operating facility. The biggest difference being that in design space – everything is imaginary whereas in the operating facility you have the benefit of being able to go out and look at the equipment and interview the operators. Ensuring that Nuclear Criticality Safety is integrated into design is a process that requires constant communication between the NCS staff and the broader engineering design team. Until the facility is constructed – nothing is physically stable and so rigorous documentation of decisions – to include any assumptions – is necessary to minimize errors. Non-NCS engineers will not understand the hazard or the physics of nuclear criticality. It is up to the NCS staff to provide training and communication to the team. The NCS staff must be patient and prepared to explain themselves many times and be as flexible as possible.

61 RADIATION PROTECTION AND DOSIMETRY↗

5,000 Robots Merge to Map the Universe in 3-D

How do you create the largest 3-D map of the universe? It’s as easy as teaching 5,000 robots how to “dance.” DESI, the Dark Energy Spectroscopic Instrument, is an experiment that will target millions of distant galaxies by automatically swiveling fiber-optic positioners (the robots) to point at them and gather their light. Scientists working at Berkeley Lab are assembling this array of robots and their related electronics – together representing into a series of 10 wedge-shaped petals that will be fitted together to form a circular focal plane. The focal plane will be mounted near the top of the Mayall Telescope at Kitt Peak National Observatory near Tucson, Arizona. This 3-minute video features interviews with two Berkeley Lab scientists: Joseph Silber, Focal Plane Lead Engineer, DESI Claire Poppett, Lead Fiber Scientist for DESI Video Credit: Marilyn Chung/Berkeley Lab

3-D MAP↗