SEARCH · Engineering Papers
Results for “INFRARED SPECTROSCOPY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
MXene Reinforced Thermosetting Composite for Lightning Strike Protection of Carbon Fiber Reinforced Polymer
Ti 3 C 2 – a member of the MXenes (2D transition metal carbides and nitrides) family, is investigated as an effective filler to improve the electrical, mechanical, and thermal properties of divinylbenzene (DVB) thermosetting resin. Consequently, its performance as a lightning strike protection (LSP) coating for carbon fiber reinforced polymer (CFRP) is evaluated. Polyaniline (PANI) – dodecylbenzene sulfonic acid (DBSA) complex is used to cure the DVB resin. The synergic effect of MXenes (with surface that is negatively charged) with polyaniline (positive charge) shows electrostatic bonding and improved electrical conductivity in the composite. We also find that the addition of MXenes at 2 wt% into the PANI-DVB composite shows ≈139%, 10%, and 9% improvement in electrical conductivity, flexural strength, and flexural modulus, respectively, compared to the neat PANI-DVB composite. The composites are investigated using various material characterization techniques including Fourier transforms infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Furthermore, MXenes-DVB is utilized to create a conductive thermosetting coating on top of a CFRP substrate and tested against a lightning strike of 100 kA. CFRP with MXenes-DVB coating reduced the surface damage from 40.61 cm 2 (reference CFRP panel) to 13.29 cm 2 (CFRP coated with MXenes-DVB).
Scalable Layer-by-Layer Electrospray-Assisted Interfacial Polymerization: Enabling Large-Area Polyamide Membrane Fabrication
Layer-by-layer electrospray-assisted interfacial polymerization (LBL-EAIP) has recently been proposed as an alternative approach for fabricating polyamide membranes with precisely controlled thickness and polymerization degree, showing great potential for reverse osmosis (RO) membrane synthesis. In this article, we report a scale-up strategy for LBL-EAIP to enable its practical application in RO membrane manufacturing. A multi-jet electrospray apparatus was developed, and the device configuration and process parameters were carefully adjusted to produce polyamide-on-polyethersulfone thin film composite (TFC) membranes with consistently high salt rejection and water permeance across the membrane area. Specifically, an average 97.1% NaCl rejection from a 2000 ppm NaCl feed was achieved with an area-to-area deviation of 1%, along with a deionized water permeance of 0.90 ± 0.11 LMH/bar at 15 bar feed pressure. In addition, a Fourier-transform infrared spectroscopy (FTIR)-based analytical method was developed for semi-quantitative assessment of membrane thickness and compositional uniformity, enabling rapid mapping of film microstructure and chemical variations. This work provides a pathway to scale up LBL-EAIP technology, bridging the gap between laboratory-scale innovation and industrial-scale manufacturing.
Phase Transformations Driving Biaxial Stress Reduction During Wake-Up of Ferroelectric Hafnium Zirconium Oxide Thin Films
Biaxial stress is identified to play an important role in the polar orthorhombic phase stability in hafnium oxide-based ferroelectric thin films. However, the stress state during various stages of wake-up has not yet been quantified. In this work, the stress evolution with field cycling in hafnium zirconium oxide capacitors is evaluated. The remanent polarization of a 20 nm thick hafnium zirconium oxide thin film increases from 9.80 to 15.0 µC cm –2 following 10 6 field cycles. This increase in remanent polarization is accompanied by a decrease in relative permittivity that indicates that a phase transformation has occurred. The presence of a phase transformation is supported by nano-Fourier transform infrared spectroscopy measurements and scanning transmission electron microscopy that show an increase in ferroelectric phase content following wake-up. The stress of individual devices field cycled between pristine and 10 6 cycles is quantified using the sin 2 (ψ) technique, and the biaxial stress is observed to decrease from 4.3 ± 0.2 to 3.2 ± 0.3 GPa. The decrease in stress is attributed, in part, to a phase transformation from the antipolar Pbca phase to the ferroelectric Pca2 1 phase. This work provides new insight into the mechanisms controlling and/or accompanying polarization wake-up in hafnium oxide-based ferroelectrics.
Triggering C-N Coupling on Metal Oxide Nanocomposite for the Electrochemical Reduction of CO 2 and NO x ⁻ to Formamide
The co-electroreduction of CO 2 and NO x ⁻ (NO 3 ⁻ /NO 2 ⁻ ) to generate formamide (HCONH 2 ) offers an opportunity for downstream chemical and polymer manufacturing decarbonization; however, significant challenges lie in the C-N coupling and the associated low product selectivity. Herein, p-block metal oxides are incorporated in copper oxides to provide more accessible active sites for reactant adsorption and activation, tuning the reaction selectivity toward the formamide production. Through in situ Raman and synchrotron-based infrared spectroscopy measurements, C-N bond formation is demonstrated in real-time with the CuO x /BiO x catalyst, where the C-N bond is detected via a *CHO and *NH 2 intermediates formation, in agreement with the density functional theory calculations. When tested in a flow electrolyzer, a formamide yield rate of 134 ± 11 mmol h -1 g cat -1 is reported, the first report of co-electroreduction of CO 2 and NO x ⁻ to formamide beyond conventional H-cell measurements. These new insights on the C-N coupling mechanisms and scale-up capability provide directions for further development of electrocatalysts for the formamide production.
ZIF‐8 Membrane Permselectivity Modification by Manganese(II) Acetylacetonate Vapor Treatment
Abstract Vapor‐phase treatment of ZIF‐8 membranes with manganese(II) acetylacetonate (Mn(acac) 2 ) allows permselectivity tuning. Propylene/propane selectivity increases from 31 to 210 after the Mn(acac) 2 treatment at 165 °C for 30 min, while selectivities increase from 14.6 to 242 for H 2 /CH 4 , from 2.9 to 38 for CO 2 /CH 4 , from 2.4 to 29 for CO 2 /N 2 , and from 2.9 to 7.5 for O 2 /N 2 , after Mn(acac) 2 treatment at 175 °C for 30 min. Stable equimolar propylene/propane mixture selectivity of 165 at ambient temperature and 4 bar equimolar feed with a propylene flux of 8.3×10 −4 mol m −2 s −1 is established. A control experiment excludes thermal treatment alone causing these changes. XPS analysis reveals the presence of Mn(acac) 2 on the outer surface of the vapor‐treated ZIF‐8 membranes while no other changes are detectable by X‐ray diffraction and infrared spectroscopy.
Precise Identification and Characterization of Catalytically Active Sites on the Surface of γ‐Alumina**
Abstract γ‐alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large‐scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ‐alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid‐state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O) 5 Al(VI)‐OH sites on the (100) segments of massively restructured (110) facets on typical rhombus‐platelet γ‐alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ‐alumina samples) responsible for its unique catalytic activity. Such (O) 5 Al(VI)‐OH sites are also present on the macroscopically defined (100) facets of γ‐alumina with elongated/rod‐like geometry. The mechanism by which these sites lose ‐OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta‐coordinate Al +3 O 5 sites is clarified. These coordinatively unsaturated penta‐coordinate Al sites produce well‐defined thermally stable Al‐carbonyl complexes. Our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ‐alumina and their role as catalytically active sites.
CO 2 Capture by Hybrid Ultramicroporous TIFSIX‐3‐Ni under Humid Conditions Using Non‐Equilibrium Cycling
Abstract Although pyrazine‐linked hybrid ultramicroporous materials (HUMs, pore size <7 Å) are benchmark physisorbents for trace carbon dioxide (CO 2 ) capture under dry conditions, their affinity for water (H 2 O) mitigates their carbon capture performance in humid conditions. Herein, we report on the co‐adsorption of H 2 O and CO 2 by TIFSIX‐3‐Ni—a high CO 2 affinity HUM—and find that slow H 2 O sorption kinetics can enable CO 2 uptake and release using shortened adsorption cycles with retention of ca. 90 % of dry CO 2 uptake. Insight into co‐adsorption is provided by in situ infrared spectroscopy and ab initio calculations. The binding sites and sorption mechanisms reveal that both CO 2 and H 2 O molecules occupy the same ultramicropore through favorable interactions between CO 2 and H 2 O at low water loading. An energetically favored water network displaces CO 2 molecules at higher loading. Our results offer bottom‐up design principles and insight into co‐adsorption of CO 2 and H 2 O that is likely to be relevant across the full spectrum of carbon capture sorbents to better understand and address the challenge posed by humidity to gas capture.
Bonding and Acidity of the Formal Hydride in the Prototypical Au 9 (PPh 3 ) 8 H 2+ Nanocluster
Abstract The role of hydrogen atoms as surface ligands on metal nanoclusters is of profound importance but remains difficult to directly study. While hydrogen atoms often appear to be incorporated formally as hydrides, evidence suggests that they donate electrons to the cluster's delocalized superatomic orbitals and may consequently behave as acidic protons that play key roles in synthetic or catalytic mechanisms. Here we directly test this assertion for the prototypical Au 9 (PPh 3 ) 8 H 2+ nanocluster, formed by addition of a hydride to the well‐characterized Au 9 (PPh 3 ) 8 3+ . Using gas‐phase infrared spectroscopy, we were able to unambiguously isolate Au 9 (PPh 3 ) 8 H 2+ and Au 9 (PPh 3 ) 8 D 2+ , revealing an Au−H stretching mode at 1528 cm −1 that shifts to 1038 cm −1 upon deuteration. This shift is greater than the maximum expected for a typical harmonic potential, suggesting a potential governing cluster‐H bonding that has some square‐well character consistent with the hydrogen nucleus behaving as a metal atom in the cluster core. Complexing this cluster with very weak bases reveals a redshift of 37 cm −1 in the Au−H vibration, consistent with those typically seen for moderately acidic groups in gas phase molecules and providing an estimate of the acidity of Au 9 (PPh 3 ) 8 H 2+ , at least with regard to its surface reactivity.
Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol
Abstract Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal‐support interactions when using supported metal nanoparticles. This study focuses on CO 2 hydrogenation over supported Cu nanoparticles, revealing a 3‐fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO 2.8 H 0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO 3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO 2.8 H 0.2 surface hydride species follow a Mars van Krevelen mechanism in CO 2 hydrogenation, promoting methanol production. High‐pressure steady‐state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO 2.8 H 0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO 3 . An operando high‐pressure diffuse reflectance infrared spectroscopy (DRIFTS)‐SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate‐limiting. However, the catalytic reactivity of Cu/BaTiO 2.8 H 0.2 towards the formate species is much higher than Cu/BaTiO 3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.
Caught in the H inact : Crystal Structure and Spectroscopy Reveal a Sulfur Bound to the Active Site of an O 2 -stable State of [FeFe] Hydrogenase
[FeFe] hydrogenases are the most active H 2 converting catalysts in nature, but their extreme oxygen sensitivity limits their use in technological applications. The [FeFe] hydrogenases from sulfate reducing bacteria can be purified in an O 2 -stable state called H inact . To date, the structure and mechanism of formation of H inact remain unknown. Our 1.65 Å crystal structure of this state reveals a sulfur ligand bound to the open coordination site. Furthermore, in-depth spectroscopic characterization by X-ray absorption spectroscopy (XAS), nuclear resonance vibrational spectroscopy (NRVS), resonance Raman (RR) spectroscopy and infrared (IR) spectroscopy, together with hybrid quantum mechanical and molecular mechanical (QM/MM) calculations, provide detailed chemical insight into the Hinact state and its mechanism of formation. This may facilitate the design of O 2 -stable hydrogenases and molecular catalysts.
ZIF‐8 Membrane Permselectivity Modification by Manganese(II) Acetylacetonate Vapor Treatment
Vapor-phase treatment of ZIF-8 membranes with manganese(II) acetylacetonate (Mn(acac) 2 ) allows permselectivity tuning. Propylene/propane selectivity increases from 31 to 210 after the Mn(acac) 2 treatment at 165 °C for 30 min, while selectivities increase from 14.6 to 242 for H 2 /CH 4 , from 2.9 to 38 for CO 2 /CH 4 , from 2.4 to 29 for CO 2 /N 2 , and from 2.9 to 7.5 for O 2 /N 2 , after Mn(acac) 2 treatment at 175 °C for 30 min. Stable equimolar propylene/propane mixture selectivity of 165 at ambient temperature and 4 bar equimolar feed with a propylene flux of 8.3×10 −4 mol m −2 s −1 is established. Furthermore, a control experiment excludes thermal treatment alone causing these changes. XPS analysis reveals the presence of Mn(acac) 2 on the outer surface of the vapor-treated ZIF-8 membranes while no other changes are detectable by X-ray diffraction and infrared spectroscopy.
Precise Identification and Characterization of Catalytically Active Sites on the Surface of γ-Alumina
γ-alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large-scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ-alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid-state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O) 5 Al(VI)-OH sites on the (100) segments of massively restructured (110) facets on typical rhombus-platelet γ-alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ-alumina samples) responsible for its unique catalytic activity. Such (O) 5 Al(VI)-OH sites are also present on the macroscopically defined (100) facets of γ-alumina with elongated/rod-like geometry. The mechanism by which these sites lose -OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta-coordinate Al +3 O 5 sites is clarified. These coordinatively unsaturated penta-coordinate Al sites produce well-defined thermally stable Al-carbonyl complexes. Overall, our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ-alumina and their role as catalytically active sites.
CO 2 Capture by Hybrid Ultramicroporous TIFSIX‐3‐Ni under Humid Conditions Using Non‐Equilibrium Cycling
Abstract Although pyrazine‐linked hybrid ultramicroporous materials (HUMs, pore size <7 Å) are benchmark physisorbents for trace carbon dioxide (CO 2 ) capture under dry conditions, their affinity for water (H 2 O) mitigates their carbon capture performance in humid conditions. Herein, we report on the co‐adsorption of H 2 O and CO 2 by TIFSIX‐3‐Ni—a high CO 2 affinity HUM—and find that slow H 2 O sorption kinetics can enable CO 2 uptake and release using shortened adsorption cycles with retention of ca. 90 % of dry CO 2 uptake. Insight into co‐adsorption is provided by in situ infrared spectroscopy and ab initio calculations. The binding sites and sorption mechanisms reveal that both CO 2 and H 2 O molecules occupy the same ultramicropore through favorable interactions between CO 2 and H 2 O at low water loading. An energetically favored water network displaces CO 2 molecules at higher loading. Our results offer bottom‐up design principles and insight into co‐adsorption of CO 2 and H 2 O that is likely to be relevant across the full spectrum of carbon capture sorbents to better understand and address the challenge posed by humidity to gas capture.
Facet-Dependent Water Inhibition of Alkanol Dehydration on TiO2 via Distinct Water–Alkanol Complexes
Water is ubiquitous in biomass-derived feeds, yet its molecular impact on oxygen-elimination reactions remains poorly understood, particularly for catalysts exposing different facets. Here, we utilize well-defined TiO2 nanocrystals with dominant (101) and (001) facets to reveal a pronounced facet-dependent effect of water, where inhibition for dehydration of isopropanol (IPA) on the TiO2(001) surface is about four times more severe than TiO2(101). Through a combination of in situ solid state NMR, in situ infrared spectroscopy, kinetics studies, and theoretical calculations, we demonstrate that this disparity arises from the formation of distinct alkanol-water complex intermediates. On TiO2(001), IPA undergoes dissociative adsorption to form an isopropoxide-H2O complex that readily drives the surface into a complex-dominated regime. This pathway increases the activation barrier for C–H cleavage by 40 kJ mol-1 by inducing a disordered transition state. In contrast, TiO2(101) favors molecular IPA adsorption with weak hydrogen bonding to water, resulting in a smaller complex formation constant and a much smaller activation barrier increase (25 kJ mol-1). By quantitatively linking facet-dependent complex coverage to transition-state destabilization, this work moves beyond simple site-blocking models and provides a conceptual framework for designing catalysts that remain active in water-containing environments
Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum
High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Additionally, tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, 13 C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.
Interlaminar improvement of carbon fiber/epoxy composites via fluorine‐containing high‐epoxy‐value sizing agent
Abstract To improve the interfacial bonding effect of carbon fibers (CFs) and epoxy resins, we prepared a fluorine‐containing high‐epoxy‐value sizing agent (named TS) in this article. It is an emulsion with a more uniform particle size distribution and higher stability better than a commercial Takemoto sizing agent. In addition, sulfonic acid groups can improve the hydrophilicity of the TS, and the presence of epoxy groups enhances the wettability between CFs and the matrix. The properties of the sizing agents were examined by Fourier transform infrared spectroscopy, dynamic light scattering, and thermogravimetric analysis. The sized CFs were evaluated by scanning electron microscopy, x‐ray photoelectron spectroscopy, monofilament tensile test, and dynamic contact angle. Afterward, CF/epoxy composites were prepared, and their fracture morphology and interlaminar shear strength (ILSS) were examined. Results indicated that the TS sizing significantly increased the content of activated carbon on the surface of the CFs and improved the bonding effect between the fiber and the matrix. After TS was sized, the ILSS increased from 49.64 to 58.74 MPa, 18.34% higher than unsized CF/epoxy composites, showing the prominent interfacial reinforcement better than commercial Takemoto.
Dual material fused filament fabrication of composite core‐shell structures with improved impact resistance and interfacial adhesion
The mechanical performance of parts produced by fused filament fabrication (FFF) has been limited due to the presence of voids and poor interlayer welding. Recent advancements in FFF have enabled the fabrication of void-free objects with strong interlayer welding through the use of semicrystalline polymer shells such as high-density polyethylene (HDPE) along with a high viscosity core polymer like acrylonitrile-butadiene-styrene (ABS). Furthermore, the zero-shear viscosity (η0) of ABS is three orders of magnitude higher than HDPE making the ABS-HDPE core-shell configuration preferable. ABS holds the shape by preventing bulk flow and part bending while HDPE promotes full surface contact across the layers. Most polymers, however, are immiscible which causes a weak weld line along the core-shell interface. Herein, maleic anhydride (MAH) is grafted to the butadiene segment of the ABS core thereby compatibilizing the interface with HDPE, improving the interfacial adhesion. Attenuated total reflectance-Fourier transform infrared spectroscopy was employed to confirm successful grafting. Using a custom-made die affording the core-shell structure, the ABS-g-MAH is shown to improve the impact resistance by 253% and 16% compared to neat HDPE and ABS specimens, respectively. Additionally, a 10% increase compared to the unmodified ABS-HDPE core-shell configuration is observed.