Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Current response of a TlBr detector to {sup 137}Cs {gamma}-ray radiation

The current response of a TlBr detector to {sup 137}Cs {gamma}-ray radiation has been studied in the dose-rate range 0.033-3.84 Gy/min and within the voltage range 1-300 V; the detectors are based on pure and doped TlBr crystals grown from the melt by the Bridgman-Stockbarger method. The mass fraction of Pb or Ca introduced into the TlBr crystals was 1-10 ppm for Pb and 150 ppm for Ca. The current response of nominally undoped TlBr samples was nearly linear over two decades of studied dose rates. Deep hole levels associated with cationic vacancies V{sub c}{sup -} determine the dependence of the current response on the voltage in the high electric fields. The parameters of the carriers' transport {mu}{tau} are determined. The TlBr crystals grown in vacuum and in the bromine vapor exhibit a large mobility-lifetime product of 4.3 Multiplication-Sign 10{sup -4} and 6.4 Multiplication-Sign 10{sup -5} cm{sup 2}V{sup -1}, respectively. The value of {mu}{tau} is in the range (4-9) Multiplication-Sign 10{sup -5} cm{sup 2}V{sup -1} for crystals doped with a divalent cation.

36 MATERIALS SCIENCE↗

Carbazole-Based Hole-Transport Materials for High-Efficiency and Stable Perovskite Solar Cells

As organic–inorganic halide perovskite solar cells (PSCs) near commercialization, stability challenges during real-world conditions, such as durability at elevated temperatures, still need to be addressed. We have previously reported that doping of triarylamine-based hole-transport layers (HTLs) with a triarylamine-based radical cation salt (EHCz-3EtCz/EH44-ox) leads to enhanced PSC stability at elevated temperatures. While it was shown the radical cation dopant did not need to be identical to the HTL matrix, little was known about dopant exchange to realize the maximum impact on device-level properties (e.g., increase in low intrinsic conductivity, mobility, hydrophobic properties, ease of synthesis, and thermal stability). In this paper, we study the impact of dopant exchange among stable, low-cost, high-glass-transition temperature (Tg), and easily synthesized triarylamine-based HTL and radical triarylamine cation salts as dopants. Using EH44-ox as dopant leads to the improved device-level power conversion efficiency (PCE) for all HTL matrices assessed. Moreover, increasing the number of ethylhexyl chains from one to two per molecule and positioning these chains at the periphery rather than the core resulted in improved hydrophobicity. PSCs based on our HTL formulations have similar power conversion efficiencies (PCE) as those of PSCs based on commercially available HTLs while demonstrating greatly improved device-level stability at elevated temperatures.

14 SOLAR ENERGY↗

Chemically Stable Polyarylether-Based Metallophthalocyanine Frameworks with High Carrier Mobilities for Capacitive Energy Storage

Covalent organic frameworks (COFs) with efficient charge transport and exceptional chemical stability are emerging as an import class of semiconducting materials for opto-/electronic devices and energy-related applications. However, the limited synthetic chemistry to access such materials and the lack of mechanistic understanding of carrier mobility greatly hinder their practical applications. Herein, we report the synthesis of three chemically stable polyarylether-based metallophthalocyanine COFs (PAE-PcM, M = Cu, Ni, and Co) and facile in situ growth of their thin films on various substrates (i.e., SiO 2 /Si, ITO, quartz) under solvothermal conditions. We show that PAE-PcM COFs thin films with van der Waals layered structures exhibit p -type semiconducting properties with the intrinsic mobility up to ~19.4 cm 2 V -1 s -1 and 4 orders of magnitude of increase in conductivity for PAE-PcCu film (0.2 S m -1 ) after iodine doping. Density functional theory calculations reveal that the carrier transport in the framework is anisotropic, with the out-of-plane hole transport along columnar stacked phthalocyanine more favorable. Furthermore, PAE-PcCo shows the redox behavior maximumly contributes ~88.5% of its capacitance performance, giving rise to a high surface area normalized capacitance of ~19 μF cm -2 . Overall, this work not only offers fundamental understandings of electronic properties of polyarylether-based 2D COFs but also paves the way for their energy-related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MBE growth and donor doping of coherent ultrawide bandgap AlGaN alloy layers on single-crystal AlN substrates

Single-crystal Aluminum Nitride (AlN) crystals enable the epitaxial growth of ultrawide bandgap Al(Ga)N alloys with drastically lower extended defect densities. Here, we report the plasma-MBE growth conditions for high Al-composition AlGaN alloys on single-crystal AlN substrates. An AlGaN growth guideline map is developed, leading to pseudomorphic Al x Ga 1–x N epitaxial layers with x ~0.6–1.0 Al contents at a growth rate of ~0.3 μm/h. These epitaxial layers exhibit atomic steps, indicating step flow epitaxial growth, and room-temperature band edge emission from ~4.5 to 5.9 eV. Growth conditions are identified in which the background impurity concentrations of O, C, Si, and H in the MBE layers are found to be very near or below detection limits. An interesting Si segregation and gettering behavior is observed at the epitaxial AlGaN/AlN heterojunction with significant implications for the formation and transport of 2D electron or hole gases. Well-controlled intentional Si doping ranging from ~2 × 10 17 to 3 × 10 19 atoms/cm 3 is obtained, with sharp dopant density transition profiles. In Si-doped Al 0.6 Ga 0.4 N epilayers, a room-temperature free electron concentration of ~3 × 10 19 /cm 3 , an electron mobility of ~27 cm 2 /V s, and an n-type resistivity of ~7.5 m Ω cm are obtained. Here, the implications of these findings on electronic and photonic devices on single-crystal AlN substrates are discussed.

36 MATERIALS SCIENCE↗

Magnetotransport of single crystalline YSb

Here, we report magnetic field dependent transport measurements on a single crystal of cubic YSb together with first principles calculations of its electronic structure. The transverse magnetoresistance does not saturate up to 9 T and attains a value of 75 000% at 1.8 K. The Hall coefficient is electron-like at high temperature, changes sign to hole-like between 110 and 50 K, and again becomes electron-like below 50 K. First principles calculations show that YSb is a compensated semimetal with a qualitatively similar electronic structure to that of isostructural LaSb and LaBi, but with larger Fermi surface volume. The measured electron carrier density and Hall mobility calculated at 1.8 K, based on a single band approximation, are $6.5\times {{10}^{20}}$ cm –3 and $6.2\times {{10}^{4}}$ cm 2 Vs –1 , respectively. These values are comparable with those reported for LaBi and LaSb. Like LaBi and LaSb, YSb undergoes a magnetic field-induced metal-insulator-like transition below a characteristic temperature T m , with resistivity saturation below 13 K. Thickness dependent electrical resistance measurements show a deviation of the resistance behavior from that expected for a normal metal; however, they do not unambiguously establish surface conduction as the mechanism for the resistivity plateau.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative Analysis for EMU Fleet Latent Loading Characterization in Support of US EVA 80 Failure

During United States Extravehicular Activity 80 (US EVA 80), water was observed in the helmet of an Extravehicular Mobility Unit (EMU) during cabin repressurization. One of the primary mechanisms that can cause water in the helmet of an EMU is integrated performance induced sublimator carryover. The sublimator is a heat exchanger that removes heat and humidity from the ventilation loop. Water vapor is condensed from the gas and removed by slurper holes in the sublimator. Sublimator carryover is caused by the inability of the EMU sublimator to remove all of the condensed water vapor, resulting in liquid water entering the helmet. To determine if sublimator carryover was a likely cause of the US EVA 80 failure, a comparative analysis of numerous historical EVAs was conducted to calculate the total latent load (total water vapor generated by the crewmember) for numerous historical EVAs and ground tests using the Systems Improved Numerical Differencing Analyzer EMU (SINDA EMU) model. The analysis showed that US EVA 80 was associated with a comparatively high latent load when compared to other EVAs that did not present water in the helmet. Further, this analysis showed that other historical EVAs which had visible water in the helmet were also associated with higher latent loads. This analysis provides evidence that the likely cause of the US EVA 80 water in the helmet event was not the failure of an individual component, but rather sublimator carryover caused by excessive production of water vapor by the crewmember. The evidence from this analysis agrees with results from the Test, Teardown, and Evaluation (TT&E) of the EMU which did not show any failure of individual components of the EMU that would lead to water in the helmet.

Noah Andersen↗

Crystal Structure of Acivicin-Inhibited [gamma]-Glutamyltranspeptidase Reveals Critical Roles for Its C-Terminus in Autoprocessing and Catalysis

Helicobacter pylori {gamma}-glutamyltranspeptidase (HpGT) is a general {gamma}-glutamyl hydrolase and a demonstrated virulence factor. The enzyme confers a growth advantage to the bacterium, providing essential amino acid precursors by initiating the degradation of extracellular glutathione and glutamine. HpGT is a member of the N-terminal nucleophile (Ntn) hydrolase superfamily and undergoes autoprocessing to generate the active form of the enzyme. Acivicin is a widely used {gamma}-glutamyltranspeptidase inhibitor that covalently modifies the enzyme, but its precise mechanism of action remains unclear. The time-dependent inactivation of HpGT exhibits a hyperbolic dependence on acivicin concentration with k{sub max} = 0.033 {+-} 0.006 s{sup -1} and K{sub I} = 19.7 {+-} 7.2 {micro}M. Structure determination of acivicin-modified HpGT (1.7 {angstrom}; R{sub factor} = 17.9%; R{sub free} = 20.8%) demonstrates that acivicin is accommodated within the {gamma}-glutamyl binding pocket of the enzyme. The hydroxyl group of Thr 380, the catalytic nucleophile in the autoprocessing and enzymatic reactions, displaces chloride from the acivicin ring to form the covalently linked complex. Within the acivicin-modified HpGT structure, the C-terminus of the protein becomes ordered with Phe 567 positioned over the active site. Substitution or deletion of Phe 567 leads to a >10-fold reduction in enzymatic activity, underscoring its importance in catalysis. The mobile C-terminus is positioned by several electrostatic interactions within the C-terminal region, most notably a salt bridge between Arg 475 and Glu 566. Mutational analysis reveals that Arg 475 is critical for the proper placement of the C-terminal region, the Tyr 433 containing loop, and the proposed oxyanion hole.

36 MATERIALS SCIENCE↗

Light–Induced Frenkel Defect Pair Formation Can Lead to Phase–Segregation of Otherwise Miscible Halide Perovskite Alloys

Alloys of ABX 3 halide perovskites (HP) exhibit unique phase behavior compared to traditional III-V and II-VI semiconductor alloys used in solar cells. While the latter typically have good mutual miscibility when their mixed components are size matched, and phase-segregate when size mismatched, HP alloys show good miscibility in the dark but can phase-segregate under light. Quantum mechanical calculations described herein reveal light-induced defect formation and migration hold the key. Specifically, the interaction between a halogen vacancy V X with halogen interstitial X i forming together a Frenkel-pair defect emerges as the enabler for phase-segregation in HP alloys. At a threshold bromine composition in the Br-I alloys, the photogenerated holes in the valence band localize, creating thereby a doubly-charged iodine Frenkel-pair (V I + I i ) 2+ . Faster migration of iodine over bromine interstitial into the vacant iodine V I site leads to the formation of iodine-rich and iodine-depleted regions, establishing phase-segregation. Removal of the mobile defects–the agent of segregation–by dark thermal annealing, supplies the opposing force, leading to reversal of phase-segregation. Furthermore, this atomistic understanding can enable some control of the phase-segregation by selecting substituting elements on the B site–such as replacing some Pb by Sn–that are unable to form stable Frenkel defects.

14 SOLAR ENERGY↗

Millimetre-long transport of photogenerated carriers in topological insulators

Excitons are spin integer particles that are predicted to condense into a coherent quantum state at sufficiently low temperature. Here by using photocurrent imaging we report experimental evidence of formation and efficient transport of non-equilibrium excitons in Bi 2-x Sb x Se 3 nanoribbons. The photocurrent distributions are independent of electric field, indicating that photoexcited electrons and holes form excitons. Remarkably, these excitons can transport over hundreds of micrometers along the topological insulator (TI) nanoribbons before recombination at up to 40 K. The macroscopic transport distance, combined with short carrier lifetime obtained from transient photocurrent measurements, indicates an exciton diffusion coefficient at least 36 m 2 s -1 , which corresponds to a mobility of 6 × 104 m 2 V -1 s -1 at 7 K and is four order of magnitude higher than the value reported for free carriers in TIs. The observation of highly dissipationless exciton transport implies the formation of superfluid-like exciton condensate at the surface of TIs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-magnetic compensation in ferromagnetic Ga1-xMnxAs and Ga1-xMnxP synthesized by ion implantation and pulsed-laser melting

The electronic and magnetic effects of intentional compensation with non-magnetic donors are investigated in the ferromagnetic semiconductors Ga1-xMnxAs and Ga1-xMnxP synthesized using ion implantation and pulsed-laser melting (II-PLM). It is demonstrated that compensation with non-magnetic donors and MnI have similarqualitative effects on materials properties. With compensation TC decreases, resistivity increases, and stronger magnetoresistance and anomalous Hall effect attributed to skew scattering are observed. Ga1-xMnxAs can be controllably compensated with Te through a metal-insulator transition through which the magnetic and electrical properties vary continuously. The resistivity of insulating Ga1-xMnxAs:Te can be described by thermal activation to the mobility edge and simply-activated hopping transport. Ga1-xMnxP doped with S is insulating at all compositions but shows decreasing TC with compensation. The existence of a ferromagnetic insulating state in Ga1-xMnxAs:Te and Ga1-xMnxP:S having TCs of the same order as the uncompensated materials demonstrates that localized holes are effective at mediating ferromagnetism in ferromagnetic semiconductors through the percolation of ferromagnetic 'puddles' which at low temperatures.

36 MATERIALS SCIENCE↗

Accumulation-Type Ohmic van der Waals Contacts to Nearly Intrinsic WSe 2 Nanosheet-Based Channels: Implications for Field-Effect Transistors

We report the fabrication of ohmic van der Waals (vdW) contacts to nearly intrinsic WSe 2 nanosheet-based channels in field-effect transistors (FETs) using degenerately p-doped MoS2 (p + -MoS2) as a contact metal. We demonstrate that accumulation-type ohmic contacts and the high device performance are achievable without electrostatically gating the drain/source contact regions despite the nearly intrinsic nature of WSe 2 . Back-gated WSe 2 FETs with p + -MoS 2 bottom contacts (which screen the back-gate electric field in the drain/source regions) exhibit linear output characteristics, a high on/off ratio of 10 8 , and a high two-terminal field-effect mobility up to ~200 cm2 V –1 s –1 at room temperature. Our theoretical modeling reveals that the p + -MoS 2 /WSe 2 vdW junction behaves like a metal/semiconductor ohmic contact signified by a vanishingly thin space-charge region of ~1 nm on the p + -MoS 2 side and a substantial accumulation layer of free holes on the WSe 2 side, which is further verified by additional temperature-dependent and dual-gated measurements of WSe 2 FETs. We attribute the formation of accumulation-type ohmic contacts free of a Schottky barrier to the near absence of Fermi-level pinning at the vdW interface and the work function of p + -MoS 2 being larger than the ionization energy of WSe 2 . This study represents an important step toward achieving low-resistance ohmic contacts to two-dimensional (2D) semiconductors by eliminating the Fermi-level pinning effects, which is expected to have significant implications for next-generation 2D semiconductor-based nanoelectronics.

36 MATERIALS SCIENCE↗

WE-E-18A-01: Large Area Avalanche Amorphous Selenium Sensors for Low Dose X-Ray Imaging

Purpose: A large area indirect flat panel imager (FPI) with avalanche gain is being developed to achieve x-ray quantum noise limited low dose imaging. It uses a thin optical sensing layer of amorphous selenium (a-Se), known as High-Gain Avalanche Rushing Photoconductor (HARP), to detect optical photons generated from a high resolution x-ray scintillator. We will report initial results in the fabrication of a solid-state HARP structure suitable for a large area FPI. Our objective is to establish the blocking layer structures and defect suppression mechanisms that provide stable and uniform avalanche gain. Methods: Samples were fabricated as follows: (1) ITO signal electrode. (2) Electron blocking layer. (3) A 15 micron layer of intrinsic a-Se. (4) Transparent hole blocking layer. (5) Multiple semitransparent bias electrodes to investigate avalanche gain uniformity over a large area. The sample was exposed to 50ps optical excitation pulses through the bias electrode. Transient time of flight (TOF) and integrated charge was measured. A charge transport simulation was developed to investigate the effects of varying blocking layer charge carrier mobility on defect suppression, avalanche gain and temporal performance. Results: Avalanche gain of ∼200 was achieved experimentally with our multi-layer HARP samples. Simulations using the experimental sensor structure produced the same magnitude of gain as a function of electric field. The simulation predicted that the high dark current at a point defect can be reduced by two orders of magnitude by blocking layer optimization which can prevent irreversible damage while normal operation remained unaffected. Conclusion: We presented the first solid state HARP structure directly scalable to a large area FPI. We have shown reproducible and uniform avalanche gain of 200. By reducing mobility of the blocking layers we can suppress defects and maintain stable avalanche. Future work will optimize the blocking layers to prevent lag and ghosting.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Transport in Charged Defect-Rich ..pi..-Conjugated Polymers

Some models of charge transport in {pi}-conjugated polymers treat these materials as if they were electrical insulators. Although this may be appropriate for a few materials, many polymers are effectively doped p-type by a high density of charged defects. Herein, limits are estimated for the charged defect density above which the resulting electrostatic fluctuations may govern transport and for the corresponding free hole density above which space-charge-limited currents should not occur. These limits are lower than the experimentally observed values in many {pi}-conjugated polymers, suggesting that these materials are more accurately described by models of doped semiconductors. This analysis also provides an explanation for two otherwise puzzling experimental observations, the low-field Poole-Frenkel mobility and the correlated energetic disorder.

36 MATERIALS SCIENCE↗

Simulating the Nanomechanical Response of Cyclooctatetraene Molecules on a Graphene Device

We investigate the atomic and electronic structures of cyclooctatetraene (COT) molecules on graphene and analyze their dependence on external gate voltage using first-principles calculations. The external gate voltage is simulated by adding or removing electrons using density functional theory calculations. This allows us to investigate how changes in carrier density modify the molecular shape, orientation, adsorption site, diffusion barrier, and diffusion path. For increased hole doping, COT molecules gradually change their shape to a more flattened conformation and the distance between the molecules and graphene increases while the diffusion barrier drastically decreases. For increased electron doping, an abrupt transition to a planar conformation at a carrier density of -8 × 10 13 e/cm 2 is observed. Furthermore, these calculations imply that the shape and mobility of adsorbed COT molecules can be controlled by externally gating graphene devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Proton irradiation effects on minority carrier diffusion length and defect introduction in homoepitaxial and heteroepitaxial n-GaN [Proton irradiation effects on minority carrier diffusion length and defect introduction in homoepitaxial n-GaN]

Here, inherent advantages of wide bandgap materials make GaN-based devices attractive for power electronics and applications in radiation environments. Recent advances in the availability of wafer-scale, bulk GaN substrates have enabled the production of high quality, low defect density GaN devices, but fundamental studies of carrier transport and radiation hardness in such devices are lacking. Here, we report measurements of the hole diffusion length in low threading dislocation density (TDD), homoepitaxial n-GaN, and high TDD heteroepitaxial n-GaN Schottky diodes before and after irradiation with 2.5 MeV protons at fluences of 4–6 × 10 13 protons/cm 2 . We also characterize the specimens before and after irradiation using electron beam-induced-current (EBIC) imaging, cathodoluminescence, deep level optical spectroscopy (DLOS), steady-state photocapacitance, and lighted capacitance-voltage (LCV) techniques. We observe a substantial reduction in the hole diffusion length following irradiation (50%–55%) and the introduction of electrically active defects which could be attributed to gallium vacancies and associated complexes (V Ga -related), carbon impurities (C-related), and gallium interstitials (Ga i ). EBIC imaging suggests long-range migration and clustering of radiation-induced point defects over distances of ~500 nm, which suggests mobile Ga i . Following irradiation, DLOS and LCV reveal the introduction of a prominent optical energy level at 1.9 eV below the conduction band edge, consistent with the introduction of Ga i .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hydrothermal Processes and Mobile Element Transport in Martian Impact Craters - Evidence from Terrestrial Analogue Craters

Hydrothermal alteration and chemical transport involving impact craters probably occurred on Mars throughout its history. Our studies of alteration products and mobile element transport in ejecta blanket and drill core samples from impact craters show that these processes may have contributed to the surface composition of Mars. Recent work on the Chicxulub Yaxcopoil-1 drill core has provided important information on the relative mobility of many elements that may be relevant to Mars. The Chicxulub impact structure in the Yucatan Peninsula of Mexico and offshore in the Gulf of Mexico is one of the largest impact craters identified on the Earth, has a diameter of 180-200 km, and is associated with the mass extinctions at the K/T boundary. The Yax-1 hole was drilled in 2001 and 2002 on the Yaxcopoil hacienda near Merida on the Yucatan Peninsula. Yax-1 is located just outside of the transient cavity, which explains some of the unusual characteristics of the core stratigraphy. No typical impact melt sheet was encountered in the hole and most of the Yax-1 impactites are breccias. In particular, the impact melt and breccias are only 100 m thick which is surprising taking into account the considerably thicker breccia accumulations towards the center of the structure and farther outside the transient crater encountered by other drill holes.

Newsom, H. E.↗

First principles study of the structural, electronic, and transport properties of triarylamine-based nanowires

We investigate with state of the art density functional theory the structural, electronic, and transport properties of a class of recently synthesized nanostructures based on triarylamine derivatives. First, we consider the single molecule precursors in the gas phase and calculate their static properties, namely (i) the geometrical structure of the neutral and cationic ions, (ii) the electronic structure of the frontier molecular orbitals, and (iii) the ionization potential, hole extraction potential, and internal reorganization energy. This initial study does not evidence any direct correlation between the properties of the individual molecules and their tendency to self-assembly. Subsequently, we investigate the charge transport characteristics of the triarylamine derivatives nanowires, by using Marcus theory. For one derivative we further construct an effective Hamiltonian including intermolecular vibrations and evaluate the mobility from the Kubo formula implemented with Monte Carlo sampling. These two methods, valid respectively in the sequential hopping and polaronic band limit, give us values for the room-temperature mobility in the range 0.1–12 cm{sup 2}/Vs. Such estimate confirms the superior transport properties of triarylamine-based nanowires, and make them an attracting materials platform for organic electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗