SEARCH · Engineering Papers

Results for “Finite Volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Zonal techniques for flowfield simulation about aircraft

A technique for performing conservative flowfield calculations on zonal meshes is described. The underlying flow solver is an implicit, upwind finite volume scheme which can incorporate either a perfect gas or an equilibrium air equation of state. Two different approaches which yield identical results, in terms of performing a conservative flux calculation on a zonal interface, are described and compared in terms of numerical efficiency. The capability of the method to handle relatively complex geometries is demonstrated by considering the flowfield about a model SR71 aircraft.

Walters, Robert W.↗

NASA NTRS1988

Navier-Stokes calculations using Cartesian grids. I - Laminar flows

A finite-volume formulation for the Navier-Stokes equations using Cartesian grids is used to study flows past airfoils. In addition to the solution of the complete equations, solutions for two simplified versions of the governing equations were obtained and compared with those using body-fitted grids. Results are presented for two airfoil sections, NACA 0012 and RAE 2822, for a range of Mach numbers, angles of attack, and Reynolds numbers. It is shown that the results are highly dependent on the smoothness of the surface grid. Without such smoothness, the skin friction and pressure converge to nonuniform distributions. On the other hand, when surface cells with smoothly varying areas are used, the results compared favorably with calculations employing body-fitted grids.

Frymier, Paul D., Jr.↗

NASA NTRS1988

Separation-bubble flow solution using Euler/Navier-Stokes zonal approach with downstream compatibility conditions

The two-dimensional flow over a blunt leading-edge plate is simulated on the basis of an Euler/Navier-Stokes zonal scheme. The scheme uses an implicit upwind finite-volume scheme, which is based on the van Leer flux-vector splitting. It is shown that the Euler/Navier-Stokes zonal scheme with downstream boundary-layer compatibility conditions is accurate and efficient.

Liu, C. H.↗

NASA NTRS1989

Unsteady Navier-Stokes computations past oscillating delta wing at high incidence

The unsteady, thin-layer, compressible Navier-Stokes equations, written in the moving frame of reference for the flow relative motion, is solved for the steady and unsteady supersonic flow around a round-edged delta wing. For supersonic flow, local conical flow solution has been obtained from the three-dimensional equations. Pseudotime stepping is used for the steady flow, while time-accurate stepping is used for the unsteady flow. The computational scheme is an implicit approximately-factored finite volume scheme which uses explicit and implicit dissipation terms. The scheme is verified for the steady flow solution. The scheme is then applied to a delta wing undergoing rolling oscillation at a reduced frequency of 1.137 with 15- deg maximum amplitude about a mean angle of attack of 10 deg for a Mach number of 2 and a Reynolds number of 500,000.

Kandil, Osama A.↗

NASA NTRS1989

Unsteady Euler airfoil solutions using unstructured dynamic meshes

Two algorithms for the solution of the time-dependent Euler equations are presented for unsteady aerodynamic analysis of oscillating airfoils. Both algorithms were developed for use on an unstructured grid made up of triangles. The first flow solver involves a Runge-Kutta time-stepping scheme with a finite-volume spatial discretization that reduces to central differencing on a rectangular mesh. The second flow solver involves a modified Euler time-integration scheme with an upwind-biased spatial discretization based on the flux-vector splitting of Van Leer. The paper presents descriptions of the Euler solvers and dynamic mesh algorithm along with results which assess the capability.

Batina, John T.↗

NASA NTRS1989

Multigrid solution of the Navier-Stokes equations on triangular meshes

A new Navier-Stokes algorithm for use on unstructured triangular meshes is presented. Spatial discretization of the governing equations is achieved using a finite-element Galerkin approximation, which can be shown to be equivalent to a finite-volume approximation for regular equilateral triangular meshes. Integration to steady-state is performed using a multistage time-stepping scheme, and convergence is accelerated by means of implicit residual smoothing and an unstructured multigrid algorithm. The convergence efficiency of the present method is shown to be competitive with those demonstrated by structured quadrilateral-mesh algorithms.

Mavriplis, D. J.↗

NASA NTRS1989

A set of strongly coupled, upwind algorithms for computing flows in chemical nonequilibrium

Two new algorithms have been developed to predict the flow of viscous, hypersonic, chemically reacting gases over three-dimensional bodies. Both take advantage of the benefits of upwind differencing, Total Variation Diminishing (TVD) techniques and of a finite-volume framework, but obtain their solution in two separate manners. The first algorithym is a time-marching scheme, and is generally used to obtain solutions in the subsonic portions of the flow field. The second algorithm is a much less expensive, space-marching scheme and can be used for the computation of the larger, supersonic portion of the flow field. Both codes compute their interface fluxes with a new temporal Riemann solver and the resulting schemes are made fully implicit including the chemical source terms.

Molvik, Gregory A.↗

NASA NTRS1989

A simple time-accurate turbomachinery algorithm with numerical solutions of an uneven blade count configuration

The present computer algorithm for the time-accurate flow analysis of rotating turbomachines is based on the finite-volume method and employs a high-resolution approximate Riemann solver for interface flux definitions and an implicit numerical scheme that possesses apparent unconditional stability. Block-block interfaces, including dynamic ones, are treated in such a way as to mimic interior block communication. The turbomachine configurations treated by way of illustration are 8-8-bladed and 11-9-bladed versions of a contrarotating unducted fan engine.

Janus, J. Mark↗

NASA NTRS1989

Application of direct solvers to unstructured meshes for the Euler and Navier-Stokes equations using upwind schemes

The application of Newton iteration to inviscid and viscous airfoil calculations on unstructured meshes is examined. A cell-centered finite volume scheme is employed on an unstructured mesh consisting of triangles. Roe's flux difference splitting scheme is used to compute the inviscid fluxes. Higher order accuracy is achieved by an interpolation procedure that makes use of auxiliary gradients. The efficient solution of the sparse linear system of equations which arises upon linearization in time is addressed. Results are presented for inviscid and viscous test cases. The complications which arise due to the introduction of nonlinear limiters are addressed.

Venkatakrishnan, V.↗

NASA NTRS1989

A multigrid and upwind viscous flow solver on 3-D embedded and overlapped grids

A numerically efficient method is presented for solving the three-dimensional governing equations of the viscous compressible flow about complex configurations with topologically different components. The physical domain is decomposed into regions for which the grid generation is relatively simple and virtually with no significant restrictions. The Navier-Stokes equations are solved by an implicit, approximately factored, upwind, finite-volume scheme. The block inversions and the diagonalized scalar inversions of the coefficient matrices are modified to allow the holes created in the computational domain by the embedded and overlapped grids. The convergence is accelerated by a multigrid algorithm despite the existence of such holes. The solution for s supersonic flow past a blunt-nose-cylinder at high angle-of-attack is obtained using a C-O grid embedded in a global Cartesian grid.

Baysal, Oktay↗

NASA NTRS1989

Numerical solution of unsteady incompressible viscous flows in generalized moving coordinate systems

A solution method of the time-accurate, incompressible Navier-Stokes equations in generalized curvilinear moving coordinate systems is presented in this paper. Accuracy is achieved by a conservative finite-volume discretization which satisfies the geometric conservation laws in generalized moving coordinate systems. The solution method is second-order accurate in space and first-order accurate in time. A fractional step solution method is used to efficiently solve the discrete equations. The unknowns, namely the pressure and the volume-fluxes, are chosen to facilitate the formulation of a consistent Poisson equation and to obtain a robust Poisson solver with favorable convergence properties. The method is validated by comparisons to other numerical and experimental solutions. The comparisons show good agreement.

Rosenfeld, Moshe↗

NASA NTRS1989

An investigation of cell centered and cell vertex multigrid schemes for the Navier-Stokes equations

Two efficient and robust finite-volume multigrid schemes for solving the Navier-Stokes equations are investigated. These schemes employ either a cell centered or a cell vertex discretization technique. An explicit Runge-Kutta algorithm is used to advance the solution in time. Acceleration techniques are applied to obtain faster steady-state convergence. Accuracy and convergence of the schemes are examined. Computational results for transonic airfoil flows are essentially the same, even for a coarse mesh. Both schemes exhibit good convergence rates for a broad range of artificial dissipation coefficients.

Radespiel, R.↗

NASA NTRS1989

Numerical modeling of turbulent supersonic reacting coaxial jets

The paper considers the mixing and subsequent combustion within turbulent reacting shear layers. A computer program was developed to solve the axisymmetric Reynolds averaged Navier-Stokes equations. The numerical method integrates the Reynolds averaged Navier-Stokes equations using a finite volume approach while advancing the solution forward in time using a Runge-Kutta scheme. Three separate flowfields are investigated and it is found that no single turbulence model considered could accurately predict the degree of mixing for all three cases.

Eklund, Dean R.↗

NASA NTRS1989

Three-dimensional calculation of supersonic reacting flows using an LU scheme

A new three-dimensional numerical program incorporated with comprehensive real gas property models has been developed to simulate supersonic reacting flows. The code employs an implicit finite volume, Lower-Upper (LU) time-marching method to solve the complete Navier-Stokes and species equations in a fully-coupled and very efficient manner. A chemistry model with nine species and eighteen reaction steps are adopted in the program to represent the chemical reaction of H2 and air. To demonstrate the capability of the program, flow fields of underexpanded hydrogen jets transversely injected into supersonic air stream inside the combustors of scramjets are calculated. Results clearly depict the flow characteristics, including the shock structure, separated flow regions around the injector, and the distribution of the combustion products.

Yu, Sheng-Tao↗

NASA NTRS1989

Calculations of rotational flows using stream function

The stream function equation is solved for steady two-dimensional (and axisymmetric) rotational flows. Both finite differences and finite volumes discretization techniques are studied, using generalized body fitted coordinates and unstructured staggered grids, respectively. For inviscid transonic flows, a new artificial viscosity scheme which does not produce any artificial vorticity is introduced, for the stability of the mixed flow calculations and for capturing shocks. The solution of Euler equations, in primitive variables, are also considered. The effects of the artificial viscosity and numerical boundary conditions on the total enthalpy and the vorticity distributions are demonstrated.

Hafez, M.↗

NASA NTRS1989

Unsteady Euler algorithm with unstructured dynamic mesh for complex-aircraft aeroelastic analysis

A finite-volume unstructured-grid FEM scheme with multistage Runge-Kutta time stepping is applied to the three-dimensional time-dependent Euler equations for inviscid flows on complex aircraft configurations undergoing structural deformation. The derivation of the model, the solution procedure, and the computer implementation are described, and results are presented graphically for a NASA Langley supersonic fighter aircraft model in steady and unsteady (harmonic oscillation in complete-vehicle bending mode) flow regimes. Good agreement between FEM predictions and experimental data is demonstrated.

Batina, John T.↗

NASA NTRS1989

Euler flutter analysis of airfoils using unstructured dynamic meshes

Modifications to a two-dimensional unsteady Euler code for the aeroelastic analysis of airfoils are described. The modifications involve including the structural equations of motion and their simultaneous time-integration with the governing flow equations. A novel aspect of the capability is that the solutions are obtained using unstructured grids made up of triangles. Comparisons are made with parallel calculations performed using linear theory and a structured grid Euler code to assess the accuracy of the unstructured grid Euler results. Results are presented for a flat plate airfoil and the NACA 0012 airfoil to demonstrate applications of the Euler code for generalized force computations and aeroelastic analysis. In these comparisons, two different finite-volume discretizations of the Euler equations on unstructured meshes were employed. Sensitivity of the Euler results to changes in numerical parameters were also investigated.

Rausch, Russ D.↗

NASA NTRS1989

A computational study on the interaction between a vortex and a shock wave

A computational study of two-dimensional shock vortex interaction is discussed in this paper. A second order upwind finite volume method is used to solve the Euler equations in conservation form. In this method, the shock wave is captured rather than fitted so that the cases where shock vortex interaction may cause secondary shocks can also be investigated. The effects of vortex strength on the computed flow and acoustic field generated by the interaction are qualitatively evaluated.

Meadows, Kristine R.↗