Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Search for deuterium in Orion and detection of high-velocity features

Results of a search for D alpha emission near the bright H alpha line in Orion. The observations revealed a high-velocity H alpha feature near -60 km/sec, whose intensity varied across the nebula, ranging from 0.005 to 0.005 relative to H alpha; another much weaker feature, possibly also H alpha, was observed at about -100 km/sec. Because these high-velocity H alpha features partially overlap the expected position of D alpha, only an upper limit D/H less than .00013 for the number ratio in Orion can be derived.

Traub, W. A.↗

Interpretation of surface features of Europa obtained from occultations by Io

Light curves of occultations of Europa by Io were used to generate a crude map of albedo features on Europa. Impact parameters and magnitude ratios for each event were imposed on a model. Residuals between the observed and computed light curves were interpreted as albedo features on Europa. In order to improve the fit between the observations and the model a general polar brightening was employed. The effects of additional albedo features and alternate models are discussed.

Herzog, A. D.↗

Interpretation of surface features of Europa obtained from occultations by Io

Light curves of occultations of Europa by Io have been used to generate a crude map of albedo features on Europa. The best values currently available for the impact parameters and magnitude ratios for each event have been imposed on our model. Residuals between the observed and computed light curves are interpreted as albedo features on Europa. In order to improve the fit between the observations and the model, it became necessary to impose a general polar brightening. The effects of additional albedo features and alternate models are discussed.

Herzog, A. D.↗

Comment on lifetime determination of solar features

A commonly used technique for determining the lifetime of solar features consists of tagging the features on a photograph contained in a time-ordered set of photographs and tracing the features back to birth and forward to disappearance. The modification of this technique proposed in the present paper consists of a certain modification of the method used for interpreting the data. Suggestions for practical implementation of the method are made, and a serious source of bias in lifetime determination from time-ordered data is discussed.

Golub, L.↗

The behavior of the Mg II doublet features near 2800 A observed in F, A, and B supergiants

The Mg II doublet features near 2800 A were recently observed in F-, A-, and B-type supergiants with a balloon-borne ultraviolet stellar spectrometer. The stars observed are Alpha UMi (F8 Ib), Alpha Per (F5 Ib), Eta Leo (A0 Ib), and Rho Leo (B1 Ib). The Mg II doublet features in Alpha UMi and Alpha Per show emission superposed on photospheric absorption. In the spectrum of Eta Leo, the Mg II lines are in absorption and show shortward-shifted components attributable to mass loss. In the spectrum of Rho Leo, the Mg II lines are primarily a composite of the photospheric and interstellar absorption features. The general behavior of the Mg II lines for supergiants of spectral types M through B are also discussed.

Kondo, Y.↗

Shock-induced deformation features in terrestrial peridot and lunar dunite

Single crystals of terrestrial olivine were experimentally shock-loaded along the 010 line to peak pressures 280, 330, and 440 kbar, and the resulting deformation features were compared to those in olivine from lunar dunite 72415. Recovered fragments were examined to determine the orientation of the planar fractures. With increasing pressure the percentage of pinacoids and prisms decreases, whereas the percentage of bipyramids increases. The complexity of the distribution of bipyramids also increases with increasing pressure. Other shock-induced deformation features, including varying degrees of recrystallization, are found to depend on pressure, as observed by others. Lunar dunite 72415 was examined and found to contain olivine with well-developed shock-deformation features. The relative proportion of pinacoid, prism, and bipyramid planar fractures measured for olivine from 72415 indicates that this rock appears to have undergone shock pressure in the range 330-440 kbar. If this dunite was brought to the surface of the moon as a result of excavation of an Imbrium event-sized impact crater, the shock-pressure range experienced by the sample and the results of cratering calculations suggest that it could have originated no deeper than 50-150 km.

Snee, L. W.↗

An Evaluation of optional timing/synchronization features to support selection of an optimum design for the DCS digital communication network

The task was to evaluate the ability of a set of timing/synchronization subsystem features to provide a set of desirable characteristics for the evolving Defense Communications System digital communications network. The set of features related to the approaches by which timing/synchronization information could be disseminated throughout the network and the manner in which this information could be utilized to provide a synchronized network. These features, which could be utilized in a large number of different combinations, included mutual control, directed control, double ended reference links, independence of clock error measurement and correction, phase reference combining, and self organizing.

Bradley, D. B.↗

Feature discrimination and detection probability in synthetic aperture radar imaging system

Images obtained using synthetic aperture radar (SAR) systems can only represent the intensities of resolution cells in the scene of interest probabilistically since radar receiver noise and Rayleigh scattering of the transmitted radiation are always present. Consequently, when features to be identified differ only by their contribution to the mean power of the radar return, discrimination can be treated by detection theory. In this paper, we develop a 'sufficient statistic' for discriminating between competing features and compare it with some suboptimal methods frequently used. Discrimination is measured by probability of detection error and depends on number of samples or 'looks', signal-to-noise ratio (SNR), and ratio of mean power returns from the competing features. Our results show discrimination and image quality rapidly saturate with SNR (very small improvement for SNR not less than 10 dB) but continue to improve with increasing number of looks.

Lipes, R. G.↗

Near-infrared observations of a new molecular feature in IRC + 10216

This letter presents a spectrum of IRC + 10216 in the 3000-4400-kayser region at 9-kayser resolution. A molecular feature at 3400-3600 kaysers has been detected which is attributed to an unspecified N-H bonded molecule; the feature appears to be variable in phase with the infrared light curve. Evidence is given for temperature variations of the emitting dust shell in phase with the infrared light curve. The results suggest that the variability of the molecular feature is due to reversible dissociation of the responsible molecule, which could occur at the higher temperatures accompanying the maxima of the light curve.

Krassner, J.↗

An investigation of the 1.9 A feature in solar-flare X-ray spectra

The 1.9 A feature, observed in the X-ray spectra of three solar flares with the Columbia University and Lockheed Palo Alto Research Laboratory spectrometers on the OSO 8 satellite, is shown to be due to a blend of 1s-2p transitions in a range of Fe ions. In the temperature range 9-16 x -10 to the 6th K, the feature has a mean wavelength of 1.900 + or - 0.009 A and is 0.04 A wider than a single line, indicating that the main contributors are Fe XIX-Fe XXII. Most of the emission originates from the dielectronic recombination process, and when inner-shell excitation is included together with normal collisional excitation, the observed intensity of the feature can be accounted for adequately. For these events, if the electron density is below approximately 10 to the 12th/cu cm, deviations from ionization equilibrium will be significant for ions more highly ionized than Fe XXI.

Parkinson, J. H.↗

Volcanic features of Io

The various volcanic landforms observed on Io by Voyager 1 are described and compared with similar features on earth. Ionian calderas, observed to cover 5% of the surface, are generally found to be of low relief, similar to certain terrestrial calderas. Flow patterns observed include dark, linear markings with lobate margins resembling terrestrial lava flows, bright lobate markings originating at calderas, and a bright flow feature surrounding the calderas. Positive relief features associated with volcanic structures include pancake-like constructions similar to low volcanic cones, sheet-like structures, rugged mountains, and a type of surface upheaval. Bright and dark diffuse markings have also been found. The implications of the high rates of volcanic activity and the apparent abundance of sulfur on Io for the type of volcanism observed are discussed, and it is concluded that while there are strong arguments for sulfur flows on the surface of Io, silicate volcanism of the type observed on earth may also occur.

Carr, M. H.↗

Spectral feature classification and spatial pattern recognition

This paper introduces a spatial pattern recognition processing concept involving the use of spectral feature classification technology and coherent optical correlation. The concept defines a hybrid image processing system incorporating both digital and optical technology. The hybrid instrument provides simplified pseudopattern images as functions of pixel classification from information embedded within a real-scene image. These pseudoimages become simplified inputs to an optical correlator for use in a subsequent pattern identification decision useful in executing landmark pointing, tracking, or navigating functions. Real-time classification is proposed as a research tool for exploring ways to enhance input signal-to-noise ratio as an aid in improving optical correlation. The approach can be explored with developing technology, including a current NASA Langley Research Center technology plan that involves a series of related Shuttle-borne experiments. A first-planned experiment, Feature Identification and Location Experiment (FILE), is undergoing final ground testing, and is scheduled for flight on the NASA Shuttle (STS2/flight OSTA-1) in 1980. FILE will evaluate a technique for autonomously classifying earth features into the four categories: bare land; water; vegetation; and clouds, snow, or ice.

Sivertson, W. E., Jr.↗

Linear feature selection with applications

Several ways in which feature selection techniques were used in LACIE are discussed. In all cases, the methods require some a priori information and assumptions; in most, the classification procedure (Bayes optimal) was chosen in advance. The transformations used for dimensionality reduction are linear, that is, the variables in feature space are always linear combinations of the original measurements. Several numerically tractable criteria developed for LACIE, which provide information about the probability of misclassification, are discussed. Recent results on linear feature selection techniques are included. Their use in LACIE is discussed. Related open questions are mentioned.

Decell, H. P., Jr.↗

Unidentified infrared spectral features

It is noted that the infrared spectra between 2 and 13 microns of a variety of objects have become available in the past few years. Attention is given to the fact that these spectra have shown many objects to have up to six emission features that are still unidentified. It is reported that other objects show absorptions due to ice, carbon monoxide, silicates, and two unidentified features. Discussion covers the observational characteristics of the unidentified features together with possible identifications.

Willner, S. P.↗

An absorption feature in the spectrum of the pulsed hard X-ray flux from 4U0115 + 63

A spectral feature, apparently an absorption line, has been observed at an energy of 20.1 + or - 0.5 keV in the pulsed flux of the 3.61-s X-ray pulsar 4U 0115+63 by using the UCSD/MIT instrument on HEAO 1. The line strength, expressed as equivalent width, is 3.1 + or - 0.5 keV. Although essentially unresolved, the feature has a depth more than 60% of the continuum flux. If the feature arises by cyclotron resonance absorption near the magnetic poles of the neutron star, it implies a magnetic field of between approximately 1.8 and 2.5 x 10 to the 12th G, depending on the gravitational redshift (no more than about 5-40%).

Wheaton, W. A.↗

A far-infrared emission feature in carbon-rich stars and planetary nebulae

The 16-30 micron spectra of several carbon stars and the planetary nebulae IC 418 and NGC 6572 have been obtained using the NASA C-141 Kuiper Airborne Observatory. A newly observed emission feature appears in the spectrum of IRC +10216 and several other carbon stars at wavelengths greater than 24 microns. The feature is interpreted as resulting from a solid-state resonance in the dust grains which have condensed around these stars. A similar feature appears in the spectra of IC 418 and NGC 6572, implying that the same type of dust is present. Since the dust probably condensed from a carbon-rich gas, this indicates an evolutionary link between carbon stars and these planetary nebulae. No identification for the grain material has been found, but some clues are apparent which could aid in the identification.

Forrest, W. J.↗

Report of subpanel on feature extraction

The state of knowledge in feature extraction for Earth resource observation systems is reviewed and research tasks are proposed. Issues in the subpixel feature estimation problem are defined as: (1) the identification of image models which adequately describe the data and the sensor it is using; (2) the construction of local feature models based on those image models; and (3) the problem of trying to understand these effects of preprocessing on the entire process. The development of ground control point (GCP) libraries for automated selection presents two concerns. One is the organization of these GCP libraries for rectification problems, i.e., the problems of automatically selecting by computer the specific GCP's for particular registration tasks. Second is the importance of integrating ground control patterns in a data base management system, allowing interface to a large number of sensor image types with an automatic selection system. The development of data validation criteria for the comparison of different extraction techniques is also discussed.

Source record↗

Identification of the emission features near 3.5 microns in the pre main sequence star HD 97048

The spectrum of HD97048 was measured with a resolving power of 450 between 3.37 and 3.64 microns. The prominent feature near 3.5 microns is well resolved, with a peak at 3.53 microns and a wing extending to a shorter wavelength. The weaker feature near 3.4 microns is found to peak at 3.43 microns, in contrast to the 3.40 micron feature seen in other astronomical objects. The observed spectrum strongly resembles laboratory spectra of mixtures of monomeric and dimeric formaldehyde embedded in low temperature solids. Of various possible excitation mechanisms, ultraviolet pumped infrared fluorescence of formaldehyde in interstellar grains provides the best explanation for the observed spectrum of HD 97048.

Baas, F.↗