Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FACTOR ANALYSIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Time-Frequency Warped Waveforms for Well-Contained Massive Machine Type Communications

Herein this paper proposes a novel time-frequency warped waveform for short symbols, massive machine-type communication (mMTC), and internet of things (IoT) applications. The waveform is composed of asymmetric raised cosine (RC) pulses to increase the signal containment in time and frequency domains. The waveform has low power tails in the time domain, hence better performance in the presence of delay spread and time offsets. The time-axis warping unitary transform is applied to control the waveform occupancy in time-frequency space and to compensate for the usage of high roll-off factor pulses at the symbol edges. The paper explains a step-by-step analysis for determining the roll-off factors profile and the warping functions. Gains are presented over the conventional Zero-tail Discrete Fourier Transform-spread-Orthogonal Frequency Division Multiplexing (ZT-DFT-s-OFDM), and Cyclic prefix (CP) DFT-s-OFDM schemes in the simulations section.

42 ENGINEERING↗
DOE OSTI2024

Techno-Economic Screening Analysis of CO2 Removal Through Enhanced Weathering

Terrestrial enhanced weathering has emerged as a technology of interest due to its simplicity, low energy requirement, and potentially low capital investment requirement. Due to the novelty of this technology, there is limited literature exploring the techno-economics of the process. This presentation reports on a screening techno-economic analysis that examines the impact of key factors that influence terrestrial enhanced weathering performance and cost. Two cases are considered for analysis, based on the material used: (1) Naturally occurring mined igneous rock (2) Industrial waste materials (like biomass ash or cement kiln dust) The analysis considers locating the terrestrial enhanced weathering system in the Midwestern United States, because of proximity to alkaline materials, availability of farmland, and appropriate ambient conditions for weathering. For the igneous rock case, the size of the system is based on the average amount of igneous rock available from a single mine—250,000 tonnes/year. For the industrial waste case, the size of the system is based on the amount of suitable waste material produced by an industrial hub—150,000 tonnes/year.

Leptinsky, Sarah↗
DOE OSTI2024

Enhanced Weathering Screening Techno-Economic Analysis

This presentation reports on a screening techno-economic analysis that examines the impact of key factors that influence terrestrial enhanced weathering performance and cost. Two cases are considered for analysis based on the material used: (1) Naturally occurring mined igneous rock (2) Industrial waste materials (like biomass ash or cement kiln dust) The analysis considers locating the terrestrial enhanced weathering system in the Midwestern United States, because of proximity to alkaline materials, availability of farmland, and appropriate ambient conditions for weathering. For the igneous rock case, the size of the system is based on the average amount of igneous rock available from a single mine—250,000 tonnes/year. For the industrial waste case, the size of the system is based on the amount of suitable waste material produced by an industrial hub—150,000 tonnes/year.

Leptinsky, Sarah↗
NASA NTRS1984

Spartan Release Engagement Mechanism (REM) stress and fracture analysis

The revised stress and fracture analysis of the Spartan REM hardware for current load conditions and mass properties is presented. The stress analysis was performed using a NASTRAN math model of the Spartan REM adapter, base, and payload. Appendix A contains the material properties, loads, and stress analysis of the hardware. The computer output and model description are in Appendix B. Factors of safety used in the stress analysis were 1.4 on tested items and 2.0 on all other items. Fracture analysis of the items considered fracture critical was accomplished using the MSFC Crack Growth Analysis code. Loads and stresses were obtaind from the stress analysis. The fracture analysis notes are located in Appendix A and the computer output in Appendix B. All items analyzed met design and fracture criteria.

Marlowe, D. S.↗
DOE OSTI2023

Emergency department overcrowding and its associated factors at HARME medical emergency center in Eastern Ethiopia

Introduction: Emergency department (ED) overcrowding has become a significant concern as it can lead to compromised patient care in emergency settings. Various tools have been used to evaluate overcrowding in ED. However, there is a lack of data regarding this issue in resource-limited countries, including Ethiopia. This study aimed to validate NEDOCS, assess level of ED overcrowding and identify associated factors at HARME Medical Emergency Center, located in Hiwot Fana Comprehensive Specialized Hospital, Harar, Ethiopia. Methods: A cross-sectional study was conducted at the HARME Medical Emergency Center, Hiwot Fana Comprehensive Specialized Hospital, involving a total of 899 patients during 120 sampling intervals. The area under the receiver operating characteristic curves (AUC) was calculated to evaluate the agreement between objective and subjective assessments of ED overcrowding. A multivariable logistic regression analysis was employed to identify factors associated with ED overcrowding and statistically significant association was declared using 95% confidence level and a p-value < 0.05. Results: The interrater agreement showed a strong correlation with a Cohen's kappa (κ) of 0.80. The National Emergency Department Overcrowding Study Score demonstrated a strong association with subjective assessments from residents and case team nurses, with an AUC of 0.81 and 0.79, respectively. According to residents' perceptions, ED were considered overcrowded 65.8% of the time. Factors significantly associated with ED overcrowding included waiting time for triage (AOR: 2.24; 95% CI: 1.54–3.27), working time (AOR: 2.23; 95% CI: 1.52–3.26), length of stay (AOR: 2.40; 95% CI: 1.27–4.54), saturation level (AOR: 2.35; 95% CI: 1.31–4.20), chronic illness (AOR: 2.19; 95% CI: 1.37–3.53), and abnormal pulse rate (AOR: 1.52; 95% CI: 1.06–2.16). Conclusion: The study revealed that ED were overcrowded approximately two-thirds of the time.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1995

Data management, archiving, visualization and analysis of space physics data

A series of programs for the visualization and analysis of space physics data has been developed at UCLA. In the course of those developments, a number of lessons have been learned regarding data management and data archiving, as well as data analysis. The issues now facing those wishing to develop such software, as well as the lessons learned, are reviewed. Modern media have eased many of the earlier problems of the physical volume required to store data, the speed of access, and the permanence of the records. However, the ultimate longevity of these media is still a question of debate. Finally, while software development has become easier, cost is still a limiting factor in developing visualization and analysis software.

Russell, C. T.↗
DOE OSTI2023

The Variable Continuous Bimaterial Interface in the San Jacinto Fault Zone Revealed by Dense Seismic Array Analysis of Fault Zone Head Waves

Key factors controlling earthquake ruptures include fault geometry, continuity, and seismic velocity structure around the fault. We present a novel tool that better informs deep bimaterial fault geometry embedded in distributed damage and seismicity, associated velocity contrasts across the fault, and their correlations with surface complexities. The method employs fault zone head and direct body waves and is applied to recordings from five spatiotemporally different seismic arrays along the complex San Jacinto fault zone (SJFZ) in southern California. We detect and distinguish these signals based on instantaneous phase coherence and relative energy in a cascading manner from one scale array to another. The analysis reveals a >70-km long continuous bimaterial interface within the SJFZ with several deep northeast dipping fault segments. The northern SJFZ, for instance, locates ~7 km northeast of its surface expression at 18-km depth. P-wave velocity contrasts range from near 0% to >15%, consistent with other bimaterial faults, and differ by a few % depending on fault-array azimuth, implying directional-dependent velocity contrasts. S-wave head waves and velocity contrasts are also imaged for the first time at the southern SJFZ, averaging to 2.9% in agreement with tomography results. The imaged geometry and continuity suggest the SJFZ initiated along remnant tectonic structures and translates to a rupture potential of M > 7.2, i.e., the sizes of its largest paleo-earthquakes. The P and S contrasts, and their ratios, have important implications for earthquake rupture speed, mode, directivity, and frictional heating along the SJFZ and other major faults globally.

58 GEOSCIENCES↗
NASA NTRS1994

Chemical and Thermal Analysis

Thermal decomposition activation energies have been determined using two methods of Thermogravimetric Analysis (TGA), with good correlation being obtained between the two techniques. Initial heating curves indicated a two-component system for Coflon (i.e. polymer plus placticizer) but a single component system for Tefzel. Two widely differing activation energies were for Coflon supported this view, 15 kcl/mol being associated with plasticizer, and 40 kcal/mol with polymer degradation. With Tefzel, values were 40-45 kcal/mol, the former perhaps being associated with a low molecular weight fraction. Appropriate acceleration factors have been determined. Thermomechanical Analysis (TMA) has shown considerable dimensional change during temperature cycles. For unaged pipe sections heating to 100 C and then holding the temperature resulted in a stable thickness increase of 2%, whereas the Coflon thickness decreased continuously, reaching -4% in 2.7 weeks. Previously strained tensile bars of Tefzel expanded on cooling during TMA. SEM performed on H2S-aged Coflon samples showed significant changes in both physical and chemical nature. The first may have resulted from explosive decompression after part of the aging process. Chemically extensive dehydrofluorination was indicated, and sulfur was present as a result of the aging. These observations indicate that chemical attack of PVDF can occur in some circumstances.

Bulluck, J. W.↗
NASA NTRSDate not supplied

Increased Rates of Hip and Spine Fractures in Astronauts are Associated with Longer Spaceflight Durations

Given the accelerated declines in bone mineral density reported in US astronauts serving on the International Space Station, there is a possibility that a prolonged exposure to spaceflight could put astronauts at increased fracture risk during subsequent planetary explorations or after return to Earth. To date, there have been no fractures in astronauts during spaceflight. Recently-reported data from a flight study suggested that intake of the bisphosphonate alendronate combined with resistive exercise (on the Advanced Resistive Exercise Device – ARED) preserved more astronauts at their preflight skeletal status after a ~6-mos spaceflight than with ARED exercise alone. However, there is low acceptance of alendronate, or the recommended zoledronic acid, to suppress in-flight bone loss largely due to concern for unintended medication side effects and a perceived absence of astronaut fractures that can be directly attributable to spaceflight exposure. Hence, a recent survey of all astronaut fractures was analyzed to assess whether the rate of postflight fractures could be associated with extended spaceflight exposures. The fracture survey was of 262 astronauts across 8433.6 person-years (PY) and grouped according to previous exposure to a “Long Duration (LD)” spaceflight (3 mos or greater, but typically 6-mos). The number of fractures was modeled using count regression adjusting for i) the repeated measures within individuals across the groups, ii) the differing length of surveillance for each individual and iii) age at start of surveillance for each of the groups. Astronaut Group by Spaceflight Exposure #Individuals PY Covered No Exposure to Spaceflight 262 1882.7 No Exposure to LD spaceflight “Non-LD” 232 6121.3 Exposure to LD spaceflight 42 429.6 Analysis revealed an increased rate of hip and spine fractures for surveillance periods compared between LD Exposure and Non-LD Exposure: Hip – Relative Rate: 3.4 (95%CI: 1.0, 12.0); Spine– Relative Rate: 3.4 (95%CI: 1.0, 11.6). For all other skeletal sites, rates of fracture were similar for LD and Non-LD exposures. Data comparisons were conducted between groups of astronauts to preclude the interpretation of greater physical activity in astronauts as a contributing factor to fracture rates. This analysis of fracture data is the first report associating postflight hip and spine fractures in astronauts with exposure to extended duration spaceflights. Further analyses integrating co-morbidities for bone loss are planned.

skeleton↗
NASA NTRSDate not supplied

Investigating the Impacts of Land Use Change on Urban Heat and Vulnerability in Cali, Columbia

The urban heat island effect (UHI) is an environmental phenomenon where cities experience higher temperatures than rural areas due to increased pavement and decreased cooling from vegetation. Approximately 76% of people in Colombia live in urban areas, and the city of Santiago de Cali is facing UHI challenges exacerbated by land use change. Wetlands and forests formerly surrounded the city but were replaced by development and agriculture. The Colombian municipal government agency Departamento Administrativo de Gestión del Medio Ambiente and the community organization Fundacion Dinamizadores Ambientales partnered with NASA DEVELOP to evaluate communities in Cali most vulnerable to urban heat. This project illustrated the utility of using NASA Earth observations to evaluate the relationship between land use, temperature, and social factors in Cali, Colombia between 2013 and 2023. The team used Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS), and Landsat 9 OLI-2/TIRS-2 to generate land surface temperature (LST), normalized difference vegetation index (NDVI), and albedo maps in Google Earth Engine. Heavy cloud cover limited the accuracy of the LST but incorporating up to three satellites for a median image reduced potential errors. Through further analysis in ArcGIS Pro, the team classified land use change using a deep learning model and found that LST was significantly higher in urban areas than in wetlands or forests. Using R studio, the team ran a principal component analysis to determine which social factors had the strongest correlation with LST. The team found that health care and green space access were negatively correlated, and Afro-Colombian ethnicity was positively correlated with LST. With awareness of the most impacted and vulnerable regions, the partner organizations can work to prioritize green space establishment in those areas to reduce the impacts of urban heat. Addressing the urban heat island effect will reduce environmental justice concerns within the city and improve overall health, air, and water quality for those who live there.

Brenna Bruffey↗
DOE OSTI2025

Using multiple high-resolution datasets to benchmark the energy exascale earth system model (E3SM) for renewable resource assessment

The United States is accelerating its shift toward a renewable energy system. However, renewable resources, which harness energy from the Earth system, are susceptible to both present-day climate variability and future climate change. For example, variations in regional climate can alter renewable energy production patterns and site viability. The use of high-resolution climate model projections can therefore facilitate and may be critical to long-term planning of renewable energy investments. However, climate models must first be validated for renewable resource assessment. This research employs multiple high-spatiotemporal-resolution datasets to assess the capability of the Department of Energy’s (DOE) Energy Exascale Earth System Model version 2 North American Regionally Refined Model (E3SMv2-NARRM) for predicting multi-year climatological values of solar and wind energy capacity factors in the continental U.S., with a focus on regional and seasonal variability. Present-day E3SMv2-NARRM simulations are compared with reported utility-scale production data obtained from the Energy Information Administration (EIA). In addition, E3SMv2-NARRM data are evaluated against non-climate benchmark models from the National Renewable Energy Laboratory, including the Wind Integration National Dataset Toolkit and the National Solar Radiation Database (NSRDB), as well as three wind energy datasets from PLUSWIND. Our analysis indicates that solar capacity factors from E3SM closely match those from the NSRDB dataset. However, both datasets tend to overestimate values by 10% in comparison to EIA data. Furthermore, biases in wind capacity factors within E3SM are notably pronounced in the West Coast regions, where the seasonal cycle diverges from EIA data.

Energy forecasting, Capacity factor, Renewable ene↗
DOE OSTI2024

Linkages between riverine flooding risk and economic damage over the continental United States

Economic damages from riverine flooding are expected to grow because of climate change. Yet, there are few 7 studies analyzing flooding damages in the U.S. that clearly measure the roles of hazard, exposure, and vulnerability 8 separately and locally. A lack of this knowledge prohibits spatially detailed predictions of future damages. By being 9 able to separate into these three risk factors, we provide all necessary inputs for uncertainty analysis of the flooding-10 damages forecasts that can incorporate new predictive scenarios for each component. To analyze the flooding risk 11 factors of non-coastal counties within the contiguous U.S. between 1999-2018, we gathered information on (1) 12 property and human damages from flooding, (2) maximum annual river discharge, (3) the number of housing units 13 and the years in which they were built, and (4) the incidence of flooding events. We used the method of trimmed 14 least absolute deviated and trimmed least square estimators to obtain the individual impact of hazard, exposure, and 15 vulnerability in the context of censored flooding damages for panel data. The resulting estimates indicate that 16 exposure has been the main driver of flooding risk for most counties in the U.S. Here, we use these estimates to describe 17 the main source of flooding risk for non-coastal counties for the 1999-2018 period.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Multidisciplinary Design Optimization and Analysis of an Open Rotor Stage: Part 1

Successful design of open rotor propulsors requires effective analysis across multiple disciplines, including aerodynamics, acoustics, and structures. A viable design must not only be efficient but must also produce an acceptable level of noise and meet all static and dynamic structural requirements. For design and optimization, this is especially challenging because running high fidelity analyses is resource-intensive, and optimizing a design may require many thousands of cases to be analyzed. For this reason, the NASA team has applied design methodology that utilizes low-cost aerodynamic methods, machine learning models, and high-fidelity analyses when necessary. This includes standard two-dimensional methods such as throughflow analysis and quasi-3D blade-to-blade CFD, as well as some newly developed methods. Optimization using 3D CFD is necessary to maximize performance, and this is considered as well. All optimizations are carried out subject to structural constraints evaluated using finite element analysis. Doing this accurately requires a robust trunnion design, capable of pitching the blade between cruise and takeoff conditions while maintaining acceptable factor of safety. Hot to cold analysis must also be applied in order to correctly determine the as-manufactured shape. For acoustics, the unsteady pressures on the blade surfaces must be predicted, and this can be done either through full-annulus unsteady CFD or through a nonlinear harmonic method (NLH). NLH can run much faster, allowing some acoustic considerations to be made earlier in the design process. The design process is ongoing, and this presentation will review the current status and planned next steps. This part of the talk will focus on aerodynamic performance and be followed by a talk on structures and acoustics.

Design↗
NASA NTRS1981

Application of Monte Carlo techniques to transient thermal modeling of cavity radiometers having diffuse-specular surfaces

A viable alternative to the net exchange method of radiative analysis which is equally applicable to diffuse and diffuse-specular enclosures is presented. It is particularly more advantageous to use than the net exchange method in the case of a transient thermal analysis involving conduction and storage of energy as well as radiative exchange. A new quantity, called the distribution factor is defined which replaces the angle factor and the configuration factor. Once obtained, the array of distribution factors for an ensemble of surface elements which define an enclosure permits the instantaneous net radiative heat fluxes to all of the surfaces to be computed directly in terms of the known surface temperatures at that instant. The formulation of the thermal model is described, as is the determination of distribution factors by application of a Monte Carlo analysis. The results show that when fewer than 10,000 packets are emitted, an unsatisfactory approximation for the distribution factors is obtained, but that 10,000 packets is sufficient.

Mahan, J. R.↗
DOE OSTI2022

CA Special Studies: Updates to the Groundwater Pathway Radiological Dose

This environmental calculation file (ECF) summarizes the groundwater pathway exposure assumptions and methodologies used to revise radionuclide specific unit dose factors (UDFs) published in CP-64491, Hanford Site Composite Analysis Data Package – Exposure Scenarios and Radionuclide Specific Dose Conversion Factors. Specifically, this ECF describes the updated exposure-related parameters used to calculate radionuclide specific UDFs based on recommendations from the Low-Level Waste Disposal Facility Federal Review Group (LFRG) and updates to Adult External DCFs included in EPA 402-R-93-081, External Exposure to Radionuclides in Air, Water, and Soil hereinafter called Federal Guidance Report [FGR]).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1999

Integrated Modeling Tools for Thermal Analysis and Applications

Integrated modeling of spacecraft systems is a rapidly evolving area in which multidisciplinary models are developed to design and analyze spacecraft configurations. These models are especially important in the early design stages where rapid trades between subsystems can substantially impact design decisions. Integrated modeling is one of the cornerstones of two of NASA's planned missions in the Origins Program -- the Next Generation Space Telescope (NGST) and the Space Interferometry Mission (SIM). Common modeling tools for control design and opto-mechanical analysis have recently emerged and are becoming increasingly widely used. A discipline that has been somewhat less integrated, but is nevertheless of critical concern for high precision optical instruments, is thermal analysis and design. A major factor contributing to this mild estrangement is that the modeling philosophies and objectives for structural and thermal systems typically do not coincide. Consequently the tools that are used in these discplines suffer a degree of incompatibility, each having developed along their own evolutionary path. Although standard thermal tools have worked relatively well in the past. integration with other disciplines requires revisiting modeling assumptions and solution methods. Over the past several years we have been developing a MATLAB based integrated modeling tool called IMOS (Integrated Modeling of Optical Systems) which integrates many aspects of structural, optical, control and dynamical analysis disciplines. Recent efforts have included developing a thermal modeling and analysis capability, which is the subject of this article. Currently, the IMOS thermal suite contains steady state and transient heat equation solvers, and the ability to set up the linear conduction network from an IMOS finite element model. The IMOS code generates linear conduction elements associated with plates and beams/rods of the thermal network directly from the finite element structural model. Conductances for temperature varying materials are accommodated. This capability both streamlines the process of developing the thermal model from the finite element model, and also makes the structural and thermal models compatible in the sense that each structural node is associated with a thermal node. This is particularly useful when the purpose of the analysis is to predict structural deformations due to thermal loads. The steady state solver uses a restricted step size Newton method, and the transient solver is an adaptive step size implicit method applicable to general differential algebraic systems. Temperature dependent conductances and capacitances are accommodated by the solvers. In addition to discussing the modeling and solution methods. applications where the thermal modeling is "in the loop" with sensitivity analysis, optimization and optical performance drawn from our experiences with the Space Interferometry Mission (SIM), and the Next Generation Space Telescope (NGST) are presented.

Milman, Mark H.↗
DOE OSTI2021

Impacts of Substrate Thinning on FPGA Performance and Reliability [Slides]

Substrate thinning is necessary in devices with flip-chip BGA packages to enable both radiation testing and component qualification and high-spatial resolution beam-based failure analysis methods. We investigated three factors affecting device performance: subsurface damage from the thinning process, reduced heat spreading in thin substrates, and changes in device switching speed. We conclude subsurface damage to crystalline Si caused by the thinning process is removable with sufficient SiO 2 slurry polishing. Local temperature differences increase minimally in devices thinned to 3 μm. Compressive stress in the Si increases globally after device thinning and leads to slowing of ring oscillator frequency by about 0.5% compared to full-thickness devices. Future work will include extending the results to submicron Si thickness values, which also has important benefits for failure analysis, debug, and security assessments. We also plan to extend this type of work to other FPGAs and other devices like memory and processors.

36 MATERIALS SCIENCE↗