Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

OPTICAL PROPERTIES OF IRON SILICATES IN THE INFRARED TO MILLIMETER AS A FUNCTION OF WAVELENGTH AND TEMPERATURE

The Optical Properties of Astronomical Silicates with Infrared Techniques program utilizes multiple instruments to provide spectral data over a wide range of temperatures and wavelengths. Experimental methods include Vector Network Analyzer and Fourier transform spectroscopy transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5 to 300 K, across the infrared and millimeter portion of the spectrum (from 2.5 to 10,000 {mu}m or 4000 to 1 cm{sup -1}).

79 ASTRONOMY AND ASTROPHYSICS↗

Depth-dependent magnetism in epitaxial MnSb thin films: effects of surface passivation and cleaning

Depth-dependent magnetism in MnSb(0001) epitaxial films has been studied by combining experimental methods with different surface specificities: polarized neutron reflectivity, x-ray magnetic circular dichroism (XMCD), x-ray resonant magnetic scattering and spin-polarized low energy electron microscopy (SPLEEM). A native oxide {approx}4.5 nm thick covers air-exposed samples which increases the film's coercivity. HCl etching efficiently removes this oxide and in situ surface treatment of etched samples enables surface magnetic contrast to be observed in SPLEEM. A thin Sb capping layer prevents oxidation and preserves ferromagnetism throughout the MnSb film. The interpretation of Mn L{sub 3,2} edge XMCD data is discussed.

36 MATERIALS SCIENCE↗

The 2019 materials by design roadmap

Advances in renewable and sustainable energy technologies critically depend on our ability to design and realize materials with optimal properties. Materials discovery and design efforts ideally involve close coupling between materials prediction, synthesis and characterization. Increased use of computational tools, the generation of materials databases, and advances in experimental methods have substantially accelerated these activities. It is therefore an opportune time to consider future prospects for materials by design approaches. The purpose of this roadmap is to present an overview of the current state of computational materials prediction, synthesis and characterization approaches, materials design needs for various technologies, and future challenges and opportunities that must be addressed. Perspectives cover topics on computational techniques, validation, materials databases, materials informatics, high-throughput combinatorial methods, advanced characterization approaches, and materials design issues in thermoelectrics, photovoltaics, solid state lighting, catalysts, batteries, metal alloys, complex oxides and transparent conducting materials. It is our hope that this roadmap will guide researchers and funding agencies in identifying new prospects for materials design.

36 MATERIALS SCIENCE↗

Review of Particle Physics

The Review summarizes much of particle physics and cosmology. Using data from previous editions, plus 3,062 new measurements from 721 papers, we list, evaluate, and average measured properties of gauge bosons and the recently discovered Higgs boson, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as supersymmetric particles, heavy bosons, axions, dark photons, etc. All the particle properties and search limits are listed in Summary Tables. We also give numerous tables, figures, formulae, and reviews of topics such as Higgs Boson Physics, Supersymmetry, Grand Unified Theories, Neutrino Mixing, Dark Energy, Dark Matter, Cosmology, Particle Detectors, Colliders, Probability and Statistics. Among the 117 reviews are many that are new or heavily revised, including those on Pentaquarks and Inflation. The complete Review is published online in a journal and on the website of the Particle Data Group (http://pdg.lbl.gov). The printed PDG Book contains the Summary Tables and all review articles but no longer includes the detailed tables from the Particle Listings. A Booklet with the Summary Tables and abbreviated versions of some of the review articles is also available. Contents Abstract, Contributors, Highlights and Table of ContentsAcrobat PDF (150 KB) IntroductionAcrobat PDF (456 KB) Particle Physics Summary Tables Gauge and Higgs bosonsAcrobat PDF (155 KB) LeptonsAcrobat PDF (134 KB) QuarksAcrobat PDF (84 KB) MesonsAcrobat PDF (871 KB) BaryonsAcrobat PDF (300 KB) Searches (Supersymmetry, Compositeness, etc.)Acrobat PDF (91 KB) Tests of conservation lawsAcrobat PDF (330 KB) Reviews, Tables, and Plots Detailed contents for this sectionAcrobat PDF (37 KB) Constants, Units, Atomic and Nuclear PropertiesAcrobat PDF (278 KB) Standard Model and Related TopicsAcrobat PDF (7.3 MB) Astrophysics and CosmologyAcrobat PDF (2.7 MB) Experimental Methods and CollidersAcrobat PDF (3.8 MB) Mathematical Tools or Statistics, Monte Carlo, Group Theory Acrobat PDF (1.3 MB) Kinematics, Cross-Section Formulae, and PlotsAcrobat PDF (3.9 MB) Particle Listings Illustrative key and abbreviationsAcrobat PDF (235 KB) Gauge and Higgs bosonsAcrobat PDF (2 MB) LeptonsAcrobat PDF (1.5 MB) QuarksAcrobat PDF (1.2 MB) Mesons: Light unflavored and strangeAcrobat PDF (4 MB) Mesons: Charmed and bottomAcrobat PDF (7.4 MB) Mesons: OtherAcrobat PDF (3.1 MB) BaryonsAcrobat PDF (3.97 MB) Miscellaneous searchesAcrobat PDF (2.4 MB) IndexAcrobat PDF (160 KB)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NPDGamma: A Measurement of the Parity-Violating Gamma Asymmetry A in n-p Capture

The NPDGamma Experiment measures the parity-violating correlation A{sub {Gamma}Y} between neutron spin and photon momentum in the reaction {rvec n} + p {yields} d + {gamma}. Knowledge of A{sub {Gamma}Y} and other parity-violating observables in few-body nuclear systems will provide constraints for a parameterized description of {Delta}S = 0 parity-violating phenomena free from complications of nuclear structure. The NPDGamma experiment uses a polarized cold pulsed neutron beam, a liquid parahydrogen target, and a cylindrical array of 48 CsI(Tl) scintillation detectors operated in current mode to search for the asymmetry. NPDGamma recently completed the first phase of the program to measure A{sub {Gamma}Y} at the Los Alamos Neutron Science Center with the preliminary result A{sub {Gamma}Y} = (-1.2 {+-} 2.1(stat.) {+-} 0.1(sys.)) x 10{sup -7}, reproducing the previous upper limit from a measurement at a reactor facility. We discuss the theoretical background and experimental method and report on preliminary analysis of the LANSCE data. The second phase of the program to measure A{sub {Gamma}Y} is in progress at the Spallation Neutron Source at Oak Ridge National Laboratory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Behaviour of rippled shocks from ablatively-driven Richtmyer-Meshkov in metals accounting for strength

While numerous continuum material strength and phase transformation models have been proposed to capture their complex dependences on intensive properties and deformation history, few experimental methods are available to validate these models particularly in the large pressure and strain rate regime typical of strong shock and ramp dynamic loading. In the experiments and simulations we present, a rippled shock is created by laser-ablation of a periodic surface perturbation on a metal target. The strength of the shock can be tuned to access phase transitions in metals such as iron or simply to study high-pressure strength in isomorphic materials such as copper. Simulations, with models calibrated and validated to the experiments, show that the evolution of the amplitude of imprinted perturbations on the back surface by the rippled shock is strongly affected by strength and phase transformation kinetics. Increased strength has a smoothing effect on the perturbed shock front profile resulting in smaller perturbations on the free surface. Lastly, in iron, faster phase transformations kinetics had a similar effect as increased strength, leading to smoother pressure contours inside the samples and smaller amplitudes of free surface perturbations in our simulations.

36 MATERIALS SCIENCE↗

Overcoming the challenges of accessing topological hallmarks in Sb(112)

Sb is topologically non-trivial and semi-metallic, but differs from many topological semi-metals because of its continuous band gap. By measuring its (112) surface using angle- and spin-resolved photoemission spectroscopy, Sb(112) was shown to have 1D spin-polarised surface states resembling those on vicinal Bi surfaces and many topological insulators and topological semi-metals. The shape and spin-polarisation of the measured features and the calculated bands agreed. However, the measured features had a slightly steeper energy dispersion and different Fermi-momenta than the calculated bands. Both theoretical and experimental methods were necessary when determining the topology of Sb(112). The presence of projected bulk states near the Fermi-level and varying surface localisation of the electronic states meant it was challenging to deduce the topology of Sb(112) from the number of bands crossing the Fermi-level or a continuous contour in the bulk band gap. Ultimately, the calculations and measurements suggest that there are topological surface states on the Sb(112) surface.

36 MATERIALS SCIENCE↗

EpitopeVec: linear epitope prediction using deep protein sequence embeddings

Motivation: B-cell epitopes (BCEs) play a pivotal role in the development of peptide vaccines, immuno-diagnostic reagents and antibody production, and thus in infectious disease prevention and diagnostics in general. Experimental methods used to determine BCEs are costly and time-consuming. Therefore, it is essential to develop computational methods for the rapid identification of BCEs. Although several computational methods have been developed for this task, generalizability is still a major concern, where cross-testing of the classifiers trained and tested on different datasets has revealed accuracies of 51–53%. Results: We describe a new method called EpitopeVec, which uses a combination of residue properties, modified antigenicity scales, and protein language model-based representations (protein vectors) as features of peptides for linear BCE predictions. Extensive benchmarking of EpitopeVec and other state-of-the-art methods for linear BCE prediction on several large and small datasets, as well as cross-testing, demonstrated an improvement in the performance of EpitopeVec over other methods in terms of accuracy and area under the curve. As the predictive performance depended on the species origin of the respective antigens (viral, bacterial and eukaryotic), we also trained our method on a large viral dataset to create a dedicated linear viral BCE predictor with improved cross-testing performance.

59 BASIC BIOLOGICAL SCIENCES↗

Chemical annotation of small and peptide-like molecules at the Protein Data Bank

Over the past decade, the number of polymers and their complexes with small molecules in the Protein Data Bank archive (PDB) has continued to increase significantly. To support scientific advancements and ensure the best quality and completeness of the data files over the next 10 years and beyond, the Worldwide PDB partnership that manages the PDB archive is developing a new deposition and annotation system. This system focuses on efficient data capture across all supported experimental methods. The new deposition and annotation system is composed of four major modules that together support all of the processing requirements for a PDB entry. In this article, we describe one such module called the Chemical Component Annotation Tool. This tool uses information from both the Chemical Component Dictionary and Biologically Interesting molecule Reference Dictionary to aid in annotation. Benchmark studies have shown that the Chemical Component Annotation Tool provides significant improvements in processing efficiency and data quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential Age Effects of Transcranial Direct Current Stimulation on Associative Memory

Abstract Objectives Older adults experience associative memory deficits relative to younger adults (Old & Naveh-Benjamin, 2008). The aim of this study was to test the effect of transcranial direct current stimulation (tDCS) on face-name associative memory in older and younger adults. Method Experimenters applied active (1.5 mA) or sham (0.1 mA) stimulation with the anode placed over the left dorsolateral prefrontal cortex (dlPFC) during a face-name encoding task, and measured both cued recall and recognition performance. Participants completed memory tests immediately after stimulation and after a 24-h delay to examine both immediate and delayed stimulation effects on memory. Results Results showed improved face-name associative memory performance for both recall and recognition measures, but only for younger adults, whereas there was no difference between active and sham stimulation for older adults. For younger adults, stimulation-induced memory improvements persisted after a 24-h delay, suggesting delayed effects of tDCS after a consolidation period. Discussion Although effective in younger adults, these results suggest that older adults may be resistant to this intervention, at least under the stimulation parameters used in the current study. This finding is inconsistent with a commonly seen trend, where tDCS effects on cognition are larger in older than younger adults.

Leach, Ryan C.↗

CHARMM-GUI Glycan Modeler for modeling and simulation of carbohydrates and glycoconjugates

Characterizing glycans and glycoconjugates in the context of three-dimensional structures is important in understanding their biological roles and developing efficient therapeutic agents. Computational modeling and molecular simulation have become an essential tool complementary to experimental methods. In this work, we present a computational tool, Glycan Modeler for in silico N–/O –glycosylation of the target protein and generation of carbohydrate-only systems. In our previous study, we developed Glycan Reader , a web-based tool for detecting carbohydrate molecules from a PDB structure and generation of simulation system and input files. As integrated into Glycan Reader in CHARMM-GUI, Glycan Modeler (Glycan Reader & Modeler) enables to generate the structures of glycans and glycoconjugates for given glycan sequences and glycosylation sites using PDB glycan template structures from Glycan Fragment Database (http://glycanstructure.org/fragment-db). Our benchmark tests demonstrate the universal applicability of Glycan Reader & Modeler to various glycan sequences and target proteins. We also investigated the structural properties of modeled glycan structures by running 2-μs molecular dynamics simulations of HIV envelope protein. The simulations show that the modeled glycan structures built by Glycan Reader & Modeler have the similar structural features compared to the ones solved by X-ray crystallography. We also describe the representative examples of glycoconjugate modeling with video demos to illustrate the practical applications of Glycan Reader & Modeler . Glycan Reader & Modeler is freely available at http://charmm-gui.org/input/glycan.

59 BASIC BIOLOGICAL SCIENCES↗

Rare isotope-containing diamond colour centres for fundamental symmetry tests

Detecting a non-zero electric dipole moment in a particle would unambiguously signify physics beyond the Standard Model. A potential pathway towards this is the detection of a nuclear Schiff moment, the magnitude of which is enhanced by the presence of nuclear octupole deformation. However, due to the low production rate of isotopes featuring such ‘pear-shaped’ nuclei, capturing, detecting and manipulating them efficiently is a crucial prerequisite. Incorporating them into synthetic diamond optical crystals can produce defects with defined, molecule-like structures and isolated electronic states within the diamond band gap, increasing capture efficiency, enabling repeated probing of even a single atom and producing narrow optical linewidths. In this study, we used density functional theory to investigate the formation, structure and electronic properties of crystal defects in diamond containing 229 ⁢Pa, a rare isotope that is predicted to have an exceptionally strong nuclear octupole deformation. In addition, we identified and studied stable lanthanide-containing defects with similar electronic structures as non-radioactive proxies to aid in experimental methods. Our findings hold promise for the existence of such defects and can contribute to the development of a quantum information processing-inspired toolbox of techniques for studying rare isotopes.

07 ISOTOPE AND RADIATION SOURCES↗

Diverse magnetic phase diagram and anomalous Hall effect in antiferromagnetic LuMn 6⁢ Sn 6

The interactions between conduction electrons and magnetism can significantly enhance the Hall signal, a phenomenon known as the anomalous Hall effect (AHE). While the AHE is generally not expected in antiferromagnets, a large AHE is observed in certain antiferromagnets with noncollinear spin textures and nonvanishing Berry curvature. In this work, we present a rich temperature and magnetic phase diagram with eight distinct magnetic phases for the antiferromagnetic kagome compound LuMn 6 Sn 6 . The Hall effect analysis in LuMn 6 Sn 6 reveals both intriguing physical phenomena and methodological challenges. In the coplanar canted antiferromagnetic phase, we observe an AHE, which likely originates from the intrinsic effects. At low temperatures, upon entering the ferromagnetic phase, the AHE sharply increases and exceeds the conventional limits expected from intrinsic mechanisms. We also demonstrate the limitations of standard experimental methods in extracting the topological contribution to the Hall effect data. In particular, we show that accounting for magnetoresistance anisotropy helps reduce spurious contribution that can mimic topological Hall signals, although it does not fully resolve it. Furthermore, these shortcomings in current approaches in partitioning the Hall response necessitate new tools to interpret transport results in complex magnetic materials such as LuMn 6 Sn 6 .

Anomalous Hall effect↗

All-optical control of molecular fluorescence

We present a quantum electrodynamical procedure to demonstrate the all-optical control of molecular fluorescence. The effect is achieved on passage of an off-resonant laser beam through an optically activated system; the presence of a surface is not required. Following the derivation and analysis of the all-optical control mechanism, calculations are given to quantify the significant modification of spontaneous fluorescent emission with input laser irradiance. Specific results are given for molecules whose electronic spectra are dominated by transitions between three electronic levels, and suitable laser experimental methods are proposed. It is also shown that the phenomenon is sensitive to the handedness of circularly polarized throughput, producing a conferred form of optical activity.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ground-state and collective modes of a spin-polarized dipolar Bose-Einstein condensate in a harmonic trap

We report results for the Thomas-Fermi ground state of a spin-polarized dipolar interacting Bose-Einstein condensate for the case when the external magnetic field B is not orientated parallel to a principal axis but is aligned parallel to a symmetry plane of a harmonic anisotropic trap. For a dipole interaction strength parameter {epsilon}{sub D{ne}}0 the release energy of the condensate depends on the trap orientation angle {theta}{sub T} between the principal axis e{sub z,T} of the trap and the field B. From the quasiclassical Josephson equation of macroscopic quantum physics we determine the low-lying eigenfrequencies of small-amplitude collective modes of the condensate density for various trap frequencies {omega}{sub a} and trap orientation angles {theta}{sub T}. For the special case of a spherical harmonic trap with trap frequency {omega} it is rigorously shown for -(1/2)<{epsilon}{sub D}<1 that a pure s-wave symmetry breather excitation of the condensate density exists, that oscillates at a constant frequency {Omega}{sub s}={radical}(5){omega} around the ground-state cloud, despite the well-known fact that the shape of the ground-state cloud of a spin-polarized dipolar condensate is for {epsilon}{sub D{ne}}0 not isotropic. For {theta}{sub T{ne}}0 the small-amplitude modes of the particle density with isotropic and quadrupolar symmetry consist of two groups. There exist four modes that are combinations of basis functions, with s-wave, d{sub x}{sup 2}{sub -y}{sup 2}- and d{sub z}{sup 2}-wave, and d{sub xz}-wave symmetry, and two modes that are combinations of basis functions with d{sub yz}- and d{sub xy}-wave symmetry. A characteristic difference in the dependence of the frequencies of these six collective modes on the dipole interaction strength parameter {epsilon}{sub D} for prolate and oblate harmonic triaxial traps, respectively, is suggested to be used as an experimental method to measure the s-wave scattering length a{sub s} of the atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Double K-shell photoionization and hypersatellite x-ray transitions of 12{<=}Z{<=}23 atoms

Single-photon double K-shell ionization of low-Z neutral atoms in the range 12{<=}Z{<=}23 is investigated. The experimental method was based on measurements of the high-resolution K{alpha}{sup h} hypersatellite x-ray spectra following the radiative decay of the K-shell double-vacancy states excited by monochromatic synchrotron radiation. The photon energy dependence of the double K-shell ionization was measured over a wide range of photon energies from threshold up to and beyond the maximum of the double-to-single photoionization cross section ratios. From the high-resolution x-ray emission spectra the energies and linewidths of the hypersatellite transitions, as well as the K{alpha}{sub 1}{sup h}:K{alpha}{sub 2}{sup h} intensity ratios, were determined. The relative importance of the initial-state and final-state electron-electron interactions to the K-shell double photoionization is addressed. Physical mechanisms and scaling laws of the K-shell double photoionization are examined. A semiempirical universal scaling of the double-photoionization cross sections with the effective nuclear charge for neutral atoms in the range 2{<=}Z{<=}47 is established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near-resonance spin-noise spectroscopy

Spectroscopy of atomic spin noise allows the determination of many sample properties such as energy-level structures and transverse-spin relaxation rates without the need to drive the system away from equilibrium with applied fields. Analysis of noise measurements can also reveal the processes that limit the sensitivity of a measured signal. Standard methods for spectroscopic noise measurements in atomic vapors rely on far-off-resonant optical probing. We present a method for investigating spin noise with a probe beam frequency relatively close to resonance and show how the back action of the probe on the atomic state can be subtracted from the recorded noise spectra. We verify this method experimentally by showing noise data that scale with the square root of the number of atoms, after the probe back action has been properly subtracted.

74 ATOMIC AND MOLECULAR PHYSICS↗

Role of Ce 4 + in the scintillation mechanism of codoped Gd 3 Ga 3 Al 2 O 12 : Ce

To control the time-response performance of widely used cerium-activated scintillators in cutting-edge medical-imaging devices, such as time-of-flight positron-emission tomography, a comprehensive understanding of the role of Ce valence states, especially stable Ce 4+ , in the scintillation mechanism is essential. However, despite some progress made recently, an understanding of the physical processes involving Ce 4+ is still lacking. The aim of this work is to clarify the role of Ce 4+ in scintillators by studying Ca 2+ codoped Gd 3 Ga 3 Al 2 O1 2 ∶Ce (GGAG∶Ce). By using a combination of optical absorption spectra and x-ray absorption near-edge spectroscopies, the correlation between Ca 2+ codoping content and the Ce 4+ fraction is seen. The energy-level diagrams of Ce 3+ and Ce 4+ in the Gd 3 Ga 3 Al 2 O 12 host are established by using theoretical and experimental methods, which indicate a higher position of the 5d 1 state of Ce 4+ in the forbidden gap in comparison to that of Ce 3+ . Underlying reasons for the decay-time acceleration resulting from Ca 2+ codoping are revealed, and the physical processes of the Ce 4+ -emission model are proposed and further demonstrated by temperature-dependent radioluminescence spectra under x-ray excitation.

Wu, Yuntao↗