Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Event detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Implications of a High Angular Resolution Image of the Sunyaev-Zel'Dovich Effect in RXJ1347-1145

The most X-ray luminous cluster known, RXJ1347-1145 (z = 0.45), has been the object of extensive study across the electromagnetic spectrum. We have imaged the Sunyaev-Zel'dovich effect (SZE) at 90 GHz (lambda = 33 mm) in RXJ1347-1145 at 10" resolution with the 64 pixel MUSTANG bolometer array on the Green Bank Telescope, confirming a previously reported strong, localized enhancement of the SZE 20" to the southeast of the center of X-ray emission. This enhancement of the SZE has been interpreted as shock-heated (>20keV) gas caused by an ongoing major (low mass ratio) merger event. Our data support this interpretation. We also detect a pronounced asymmetry in the projected cluster pressure profile, with the pressure just east of the cluster core approx. 1.6x higher than just to the west. This is the highest resolution image of the SZE made to date.

Mason, B. S.↗
NASA NTRS2011

Analysis of STS-134 Hail Event at Pad 39A, March 30, 2011

During the late afternoon of March 30, 2011 at approximately 21:25 - 21:30 GMT, hail monitor stations at Pad 39A recorded rice to pea size hail. The duration of the event was approximately 5 minutes. The maximum size detected by the three hail monitors was 10 - 12 mm. The 12 mm marble size value was measured by the active impact sensor at site #2, which experienced high winds. This 12 mm measurement may be artificially higher by one or two mm due to the extra hail kinetic energy resulting from the extreme horizontal winds. High winds from the west produced a few notable long streak-like dents in the hail pads. High winds were also responsible for damage to facilities near hail monitor site #2 on the west side of pad A (a dumpster was overturned, and a picnic table roof was demolished). NWS radar volume scan (see Figure I) showed 60-65 dBZ reflectivity values in the lowest 4 scan elevations around and over the pad 39A area. Since the lowest 0.5 degree scan showed a definite 65 dBZ signature, it is unlikely that hail had an opportunity to melt before reaching the ground. Some of the larger passive hail pad dents were shallower than what would be expected from solid frozen ice hydrometeor dents. Therefore, it is possible that the larger pea size hail may have been softer than the smaller rice size hail. This would be consistent with some melting before reaching the ground.

Lane, John E.↗
NASA NTRS2014

Structural Health Monitoring on Turbine Engines Using Microwave Blade Tip Clearance Sensors

The ability to monitor the structural health of the rotating components, especially in the hot sections of turbine engines, is of major interest to aero community in improving engine safety and reliability. The use of instrumentation for these applications remains very challenging. It requires sensors and techniques that are highly accurate, are able to operate in a high temperature environment, and can detect minute changes and hidden flaws before catastrophic events occur. The National Aeronautics and Space Administration (NASA) has taken a lead role in the investigation of new sensor technologies and techniques for the in situ structural health monitoring of gas turbine engines. As part of this effort, microwave sensor technology has been investigated as a means of making high temperature non-contact blade tip clearance, blade tip timing, and blade vibration measurements for use in gas turbine engines. This paper presents a summary of key results and findings obtained from the evaluation of two different types of microwave sensors that have been investigated for use possible in structural health monitoring applications. The first is a microwave blade tip clearance sensor that has been evaluated on a large scale Axial Vane Fan, a subscale Turbofan, and more recently on sub-scale turbine engine like disks. The second is a novel microwave based blade vibration sensor that was also used in parallel with the microwave blade tip clearance sensors on the experiments with the sub-scale turbine engine disks.

Gas Turbine Engines↗
NASA NTRS2014

Laser Energy Monitor for Double-Pulsed 2-Micrometer IPDA Lidar Application

Integrated path differential absorption (IPDA) lidar is a remote sensing technique for monitoring different atmospheric species. The technique relies on wavelength differentiation between strong and weak absorbing features normalized to the transmitted energy. 2-micron double-pulsed IPDA lidar is best suited for atmospheric carbon dioxide measurements. In such case, the transmitter produces two successive laser pulses separated by short interval (200 microseconds), with low repetition rate (10Hz). Conventional laser energy monitors, based on thermal detectors, are suitable for low repetition rate single pulse lasers. Due to the short pulse interval in double-pulsed lasers, thermal energy monitors underestimate the total transmitted energy. This leads to measurement biases and errors in double-pulsed IPDA technique. The design and calibration of a 2-micron double-pulse laser energy monitor is presented. The design is based on a high-speed, extended range InGaAs pin quantum detectors suitable for separating the two pulse events. Pulse integration is applied for converting the detected pulse power into energy. Results are compared to a photo-electro-magnetic (PEM) detector for impulse response verification. Calibration included comparing the three detection technologies in single-pulsed mode, then comparing the pin and PEM detectors in double-pulsed mode. Energy monitor linearity will be addressed.

Refaat, Tamer F.↗
NASA NTRS2016

Interactive Computing and Processing of NASA Land Surface Observations Using Google Earth Engine

Google's Earth Engine offers a "big data" approach to processing large volumes of NASA and other remote sensing products. h\ps://earthengine.google.com/ Interfaces include a Javascript or Python-based API, useful for accessing and processing over large periods of record for Landsat and MODIS observations. Other data sets are frequently added, including weather and climate model data sets, etc. Demonstrations here focus on exploratory efforts to perform land surface change detection related to severe weather, and other disaster events.

earth engine↗
NASA NTRS2016

Discovery of Rapidly Moving Partial X-Ray Absorbers Within Cassiopeiae

Gamma Cassiopeiae is an enigmatic Be star with unusually strong hard X-ray emission. The Suzaku observatory detected six rapid X-ray spectral hardening events called "softness dips" in a approx.100 ks observation in 2011. All the softness dip events show symmetric softness-ratio variations, and some of them have flat bottoms apparently due to saturation. The softness dip spectra are best described by either approx.40% or approx.70% partial covering absorption to kT approx.12 keV plasma emission by matter with a neutral hydrogen column density of approx.(2−8) ×10(exp 21)/sq cm, while the spectrum outside these dips is almost free of absorption. This result suggests the presence of two distinct X-ray-emitting spots in the gamma Cas system, perhaps on a white dwarf (WD) companion with dipole mass accretion. The partial covering absorbers may be blobs in the Be stellar wind, the Be disk, or rotating around the WD companion. Weak correlations of the softness ratios to the hard X-ray flux suggest the presence of stable plasmas at kT approx 0.9 and 5 keV, which may originate from the Be or WD winds. The formation of a Be star and WD binary system requires mass transfer between two stars; gamma Cas may have experienced such activity in the past.

tars: emission-line↗
NASA NTRS2017

Passive Wireless Vibration Sensing for Measuring Aerospace Structural Flutter

To reduce energy consumption, emissions, and noise, NASA is exploring the use of high aspect ratio wings on subsonic aircraft. Because high aspect ratio wings are susceptible to flutter events, NASA is also investigating methods of flutter detection and suppression. In support of that work a new remote, non-contact method for measuring flutter-induced vibrations has been developed. The new sensing scheme utilizes a microwave reflectometer to monitor the reflected response from an aeroelastic structure to ultimately characterize structural vibrations. To demonstrate the ability of microwaves to detect flutter vibrations, a carbon fiber-reinforced polymer (CFRP) composite panel was vibrated at various frequencies from 1Hz to 130Hz. The reflectometer response was found to closely resemble the sinusoidal response as measured with an accelerometer up to 100 Hz. The data presented demonstrate that microwaves can be used to measure flutter-induced aircraft vibrations.

Wilson, William C.↗
NASA NTRS2018

New Sensors and Techniques for Aircraft Engine Health Monitoring

The ability to monitor the health of the rotating components in aircraft engines is of major interest to aero community in improving safety and reliability. The use of instrumentation for these applications remains very challenging. It requires sensors and techniques that are highly accurate, able to operate in a high temperature environment, and sensitive enough to detect minute changes and hidden flaws before undesired events occur. The National Aeronautics and Space Administration (NASA), through several Aviation Safety Programs, has taken a leadership role in the development of new sensor technologies and techniques for the in-situ health monitoring of aircraft turbine engines. Along with the development of new instrumentation for aircraft engines, the Glenn Research Center has a diverse set of ground test facilities that are used to simulate the conditions that a vehicle would see in flight allowing new concepts to be safely developed and evaluated on the ground before progressing to actual flight. In this presentation Mark will give an overview of the NASA Glenn Research Center, discuss its past aviation safety initiatives, present some select sensors that have been developed for aircraft engine safety, and then conclude with some new measurement techniques that have been developed for use at the NASA Glenn test facilities, enabling better measurement and simulation of flight conditions. He will discuss current research and development efforts that he is working on at the NASA Glenn Research Center in the areas of new sensors and techniques for aircraft engine health monitoring. This work is being conducted in support of aviation safety.

Turbine↗
NASA NTRS2017

OGLE-2016-BLG-1469L: Microlensing Binary Composed of Brown Dwarfs

We report the discovery of a binary composed of two brown dwarfs, based on the analysis of the micro lensing event OGLE-2016-BLG-1469. Thanks to the detection of both finite-source and micro lens-parallax effects, we are able to measure both the masses M(sub 1) ~ 0.05 Solar Mass and M(sub 2) ~ 0.01 Solar Mass, and the distance D(sub L) ~ 4.5 kpc, as well as the projected separation a(sub perpendicular) ~ 0.33 au. This is the third brown-dwarf binary detected using the micro lensing method, demonstrating the usefulness of micro lensing in detecting field brown-dwarf binaries with separations of less than 1 au.

OGLE-2016-BLG-1469↗
NASA NTRS2019

Laser Energy Monitor for Triple-Pulse 2-μm IPDA Lidar Application

Integrated path differential absorption (IPDA) lidar is an active remote sensing technique for monitoring different atmospheric species. The technique relies on wavelength differentiation between strong and weak absorbing features normalized to the transmitted energy. An advanced 2-μm triple-pulse IPDA lidar was developed at NASA Langley Research Center for active sensing of carbon dioxide and water vapor simultaneously. The IPDA transmitter produces three successive laser pulses separated by a short interval (200 μs) with a repetition rate of 50Hz. Measurement of laser pulse energy accurately is a prerequisite for the retrieval of gas mixing ratios from IPDA. The design and calibration of a 2-μm triple-pulse laser energy monitor are presented. Due to the short interval between the three transmitted pulses, conventional thermal energy monitors underestimate the total transmitted energy. The design is based on a high speed, extended range InGaAs pin quantum detector suitable for separating the three pulse events. Pulse integration is applied for converting the detected pulse power into energy. The results obtained from the laser energy monitor were compared to an ultra-fast energy-meter reference for energy scaling and verification. High correlations between the pin energy monitor and the total transmitted energy were obtained. The objective of this development is to reduce measurement biases and errors using the triple-pulse IPDA technique.

Refaat, Tamer F.↗
NASA NTRSDate not supplied

An Analysis of Depolarization Streaks for Anticipating Lightning in Thundersnow

Infrequent lightning events, particularly in stratiform precipitation, present a unique decision-support challenge to National Weather Service (NWS) forecasters and core partners. Anticipating thundersnow events, which are rare compared to warm season lightning, are especially difficult to anticipate due to slanted updrafts within the comma-head region of a mid-latitude cyclone. Researchers and operational forecasters have observed depolarization streaks in differential reflectivity (ZDR) as a result of ice crystal layers prior to thundersnow initiation. These depolarization streaks form as a result of ice crystals aligning themselves with enhancements in the electric field in stratiform precipitation and are associated with ZDR values near zero. During the 7 March 2018 winter storm, a teacher in New Jersey was struck by lightning while dismissing students and depolarization streaks were observed in weather radar observations. Therefore, it is advantageous to examine depolarization streaks in ZDR to determine whether it can be used to anticipate lightning potential in winter-time events. Multiple events will be analyzed using the National Lightning Detection Network (NLDN) and the Geostationary Lightning Mapper (GLM) to determine if thundersnow flashes coincide with ZDR depolarization streaks in weather radars. This study also expands on collaboration between the NWS Huntsville Forecast Office and NASA Short-term Prediction Research and Transition (SPoRT) program to determine how depolarization streaks can be used operationally to anticipate lightning within stratiform regions. Preliminary work has indicated noticeable potential in correlating depolarization streak as a precursor to thundersnow flashes in a variety of geographical regions.

Autumn Millard↗
NASA NTRS2022

Detecting the Greatest Changes in Global Satellite-Based Precipitation Observations

In recent years, the analysis of abrupt and non-abrupt changes in precipitation has received much attention due to the importance of climate change-related issues (e.g., extreme climate events). In this study, we used a novel segmentation algorithm, DBEST (Detecting Breakpoints and Estimating Segments in Trend), to analyze the greatest changes in precipitation using a monthly pixel-based satellite precipitation dataset (TRMM 3B43) at three different scales: (i) global, (ii) continental, and (iii) climate zone, during the 1998–2019 period. We found significant breakpoints, 14.1%, both in the form of abrupt and non-abrupt changes, in the global scale precipitation at the 0.05 significance level. Most of the abrupt changes were observed near the Equator in the Pacific Ocean and Asian continent, relative to the rest of the globe. Most detected breakpoints occurred during the 1998–1999 and 2009–2011 periods on the global scale. The average precipitation change for the detected breakpoint was ±100 mm, with some regions reaching ±3000 mm. For instance, most portions of northern Africa and Asia experienced major changes of approximately +100 mm. In contrast, most of the South Pacific and South Atlantic Ocean experienced changes of −100 mm during the studied period. Our findings indicated that the larger areas of Africa (23.9%), Asia (22.9%), and Australia (15.4%) experienced significant precipitation breakpoints compared to North America (11.6%), South America (9.3%), Europe (8.3%), and Oceania (9.6%). Furthermore, we found that the majority of detected significant breakpoints occurred in the arid (31.6%) and polar (24.1%) climate zones, while the least significant breakpoints were found for snow-covered (11.5%), equatorial (7.5%), and warm temperate (7.7%) climate zones. Positive breakpoints’ temporal coverage in the arid (54.0%) and equatorial (51.9%) climates were more than those in other climates zones. Here, the findings indicated that large areas of Africa and Asia experienced significant changes in precipitation (−250 to +250 mm). Compared to the average state (trend during a specific period), the greatest changes in precipitation were more abrupt and unpredictable, which might impose a severe threat to the ecology, environment, and natural resources.

Breakpoint↗
NASA NTRS2004

Velocity Structure and Plasma Properties in Halo CMES

We have identified a set of 23 Halo CMEs and 21 Partial Halo CMEs from the LASCO Halo CME Archive for which UVCS spectra exist through July 2002. For each event we have collected basic information such as the event speed, whether or not UVCS caught the bright front, lines detected, Doppler shift and associated flare class. We are currently analyzing the subset for which UVCS caught the CME front. We also obtained excellent observations of some of the spectacular events in November 2003, and we have made theoretical calculations pertaining to CME expansion at the heights observed by UVCS. In one event we were able to analyze the properties of the current sheet in detail.

Raymond, John C.↗
NASA NTRS1987

Structure and dynamics of the plasma tail of comet P/Halley. I - Knot event on December 31, 1985

On the basis of about 500 photographs of comet Halley taken by many observers, Saito et al. (1986) classified the detected disturbances of the plasma tail as outstanding rays, streamer, helix, kink, arcade, and disconnection event (DE). In this paper, the interaction of the solar wind with the plasma tail of Comet P/Halley is examined by using results of observations by the Sakigake spacecraft of the December 31, 1985 event, which included various disturbances and one DE-like knot. On the basis of twenty photographs taken on December 31 by Japanese astronomers, the dynamic pressure model proposed by Saito et al. (1986) is examined, and the mechnism of the knot event that appeared in the plasma tail of the comet on December 31, is explained.

Saito, T.↗
NASA NTRS2022

Turbulent Heat Flux, Downward Longwave Radiation, and Large-Scale Atmospheric Circulation Associated with Wintertime Barents–Kara Sea Extreme Sea Ice Loss Events

We investigate wintertime extreme sea ice loss events on synoptic to subseasonal time scales over the Barents–Kara Sea, where the largest sea ice variability is located. Consistent with previous studies, extreme sea ice loss events are associated with moisture intrusions over the Barents–Kara Sea, which are driven by the large-scale atmospheric circulation. In addition to the role of downward longwave radiation associated with moisture intrusions, which is emphasized by previous studies, our analysis shows that strong turbulent heat fluxes are associated with extreme sea ice melting events, with both turbulent sensible and latent heat fluxes contributing, although turbulent sensible heat fluxes dominate. Our analysis also shows that these events are connected to tropical convective anomalies. A dipole pattern of convective anomalies with enhanced convection over the Maritime Continent and suppressed convection over the central to eastern Pacific is consistently detected about 6–10 days prior to extreme sea ice loss events. This pattern is associated with either the Madden–Julian oscillation (MJO) or El Nino–Southern Oscillation (ENSO). Composites show that extreme sea ice loss events are connected to tropical convection via Rossby wave propagation in the midlatitudes. However, tropical convective anomalies alone are not sufficient to trigger extreme sea ice loss events, suggesting that extratropical variability likely modulates the connection between tropical convection and extreme sea ice loss events.

Arctic↗
NASA NTRSDate not supplied

Merging Analytic Collaborative Frameworks with New Observing Strategies Toward a Digital Twin: Earth – Episodic Pulse Event Impacts on Ocean Carbon Cycle as an Example

Virtual representations of the Earth will allow us to address some of the most critical environmental issues of our time. Here, we show the first steps toward representation of riverine, estuarine, and coastal carbon processes to enable scenario driven “what-if” analyses of the carbon system and human footprint. Excess sediment and nutrient runoff from land-based human activities impact water quality and can pose serious threats to coastal and marine ecosystems. Episodic pulse events, such as extreme precipitation events, can increase the amount of nutrients entering estuaries and coastal regions, potentially leading to large phytoplankton blooms followed by anoxic conditions. Consequences of coastal runoff are predicted to increase with the higher intensity and frequency of extreme events. Beyond the threat to coastal ecosystems, recent findings suggest these episodic pulses might play a significant role for biological production influencing regional and global carbon fluxes and budgets. An improved understanding of these events through optimal, dynamic observing strategies will increase our knowledge of the land-ocean continuum and how regional events and nutrient fluxes affect the carbon cycle and ocean ecosystem. This conceptual framework enables focused science investigations by pairing data analytics and artificial intelligence tools (otherwise termed an Analytic Center Framework, ACF) with targeted measurement acquisition through distributed sensing and intelligent asset tasking (or New Observing Strategies, NOS). This NOS and ACF iterative approach acquires and integrates complementary and coincident satellite, in-situ and model data to build a more complete and in-depth picture of science phenomena. Specifically, Apache Science Data Analytic Platform (SDAP) is extended to incorporate relevant datasets for data access, harmonized analysis, and anomaly detection. When conditions are met for a likely pulse event, NASA’s D-SHIELD (Distributed Spacecraft with Heuristic Intelligence to Enable Logistical Decisions) tool is triggered to optimize asset overpass frequency and schedule observations for persistent monitoring. Targeted data is ingested by SDAP for enhanced investigation via iterative analysis until the trigger criteria is no longer met - steps toward a digital twin.

Laura Rogers↗
NASA NTRS2013

Sleuthing the MSL EDL Performance from an X Band Carrier Perspective

During the Entry, Descent, and Landing (EDL) of NASA's Mars Science Laboratory (MSL), or Curiosity, rover to Gale Crater on Mars on August 6, 2012 UTC, the rover transmitted an X-band signal composed of carrier and tone frequencies and a UHF signal modulated with an 8kbps data stream. During EDL, the spacecraft's orientation is determined by its guidance and mechanical subsystems to ensure that the vehicle land safely at its destination. Although orientation to maximize telecom performance is not possible, antennas are especially designed and mounted to provide the best possible line of sight to Earth and to the Mars orbiters supporting MSL's landing. The tones and data transmitted over these links are selected carefully to reflect the most essential parameters of the vehicle's state and the performance of the EDL subsystems for post-EDL reconstruction should no further data transmission from the vehicle be possible. This paper addresses the configuration of the X band receive system used at NASA / JPL's Deep Space Network (DSN) to capture the signal spectrum of MSL's X band carrier and tone signal, examines the MSL vehicle state information obtained from the X band carrier signal only and contrasts the Doppler-derived information against the post-EDL known vehicle state. The paper begins with a description of the MSL EDL sequence of events and discusses the impact of the EDL maneuvers such as guided entry, parachute deploy, and powered descent on the frequency observables expected at the DSN. The range of Doppler dynamics possible is derived from extensive 6 Degrees-Of-Freedom (6 DOF) vehicle state calculations performed by MSL's EDL simulation team. The configuration of the DSN's receive system, using the Radio Science Receivers (RSR) to perform open-loop recording for both for nominal and off-nominal EDL scenarios, is detailed. Expected signal carrier power-to-noise levels during EDL are shown and their impact on signal detection is considered. Particular attention is given to the selection of the appropriate RSR processing bandwidths and to its configuration for real-time signal detection. The X-band carrier frequency obtained through post-processing of the open-loop recorded spectrum is given. Detection of spacecraft status and completion of key vehicle events through their Doppler signature is discussed and illustrated. This Doppler-derived information is compared against the very accurate vehicle data obtained post-EDL via MSL's UHF radio subsystem. The paper concludes with a discussion on the advantages and disadvantages of transmitting the X-band carrier and tone signal in the general context of EDL communications and lessons learned for future missions with EDL sequences are given

Mars Science Laboratory (MSL)↗
NASA NTRS1995

Coronal electron stream and Langmuir wave detection inside a propagation channel at 4.3 AU

Observations of an energetic interplanetary electron event associated with the production of Langmuir waves, both of which are identified at 4.3 AU by instruments on the Ulysses spacecraft, are presented in this paper. This electron event propagates inside a well-defined magnetic structure. The existence of this structure is firmly established by joint particle and plasma observations made by Ulysses instruments. Its local estimated radial width is of the order of 2.3 x 10(exp 7) km (0.15 AU). The electron beam is associated with a type III burst observed from Earth at high frequencies and at low frequencies from Ulysses in association with Langmuir waves detected inside the structure. The consistency of local (Ulysses) and remote (Earth) observations in terms of temporal and geometrical considerations establishes that the structure is anchored in the solar corona near the solar active region responisble for the observed type III emission and gives an accurate determination of the injection time for the observed electron beam. Propagation analysis of the electron event is presented. In order to quantify the magnetic field properties, a variance analysis has been performed and is presented in this paper. The analysis establishes that inside the structure the amount of magnetic energy involved in the fluctuations is less than 4% of the total magnetic energy; the minimal variance direction is well defined and in coincidence with the direction of the mean magnetic field. This configuration may produce conditions favorable for scatter free streaming of energetic electrons and/or Langmuir wave production. The results presented show that the magnetic field might play a role in stabilizing the coronal-origin plasma structures and then preserving them to large, approximately 4 AU, distances in the heliosphere.

Buttighoffer, A.↗