Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Eu”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

X-ray Scintillating Lanthanide-Based Coordination Polymers

Reported are the syntheses and characterization of 25 lanthanide-containing coordination polymers exhibiting four structure types: type I′: [Ln(TFTP) 1.5 (bpy)] (Ln = La 3+ –Nd 3+ ), type I: [Ln(TFTP) 1.5 (bpy)(H 2 O)] (Ln = Sm 3+ –Lu 3+ ), type II′: [Pr(TFTP) 1.5 (phen)], and type II: [Ln(TFTP) 1.5 (phen)(H 2 O)] (Ln = Nd 3+ –Yb 3+ , excluding Pm). These compounds feature lanthanide metal cations bound to tetrafluoroterephthalate linkers (TFTP) and either, 2,2′-bipyridine (bpy) or 1,10-phenanthroline (phen) capping ligands. Initial calculations using crystallographic data revealed large void spaces, ranging from 86 Å 3 in type I to 333 Å 3 in type II. Yet, adsorption isotherm data indicate very little gas uptake of both materials with a BET surface area of 9 m 2 /g for I-Tb (8) and 19 m 2 /g for II-Tb (20). X-ray irradiation of I-Eu (6), II-Eu (18), I-Tb (8), and II-Tb (20) produced visible red and green emission, respectively. Furthermore, radioluminescence studies of both type I and II with Sm 3+ , Eu 3+ , and Tb 3+ metal centers indicate that both structure types featuring Tb 3+ are brighter than those with Eu 3+ or Sm 3+ . Notably, structure type I with Tb 3+ is the brightest scintillator with a relative luminosity of 1.7× that of bismuth germanate (BGO).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Magnetic Tunability in RE-DOBDC MOFs via NO x Acid Gas Adsorption

The magnetic susceptibility of NO x -loaded RE-DOBDC (rare earth (RE): Y, Eu, Tb, Yb; DOBDC: 2,5-dihydroxyterephthalic acid) metal–organic frameworks (MOFs) is unique to the MOF metal center. RE-DOBDC samples were synthesized, activated, and subsequently exposed to humid NO x . Each NO x -loaded MOF was characterized by powder X-ray diffraction, and the magnetic characteristics were probed by using a VersaLab vibrating sample magnetometer (VSM). Lanthanide-containing RE-DOBDC (Eu, Tb, Yb) are paramagnetic with a reduction in paramagnetism upon adsorption of NO x . Y-DOBDC has a diamagnetic moment with a slight reduction upon adsorption of NO x . The magnetic susceptibility of the MOF is determined by the magnetism imparted by the framework metal center. The electronic population of orbitals contributes to determining the extent of magnetism and change with NO x (electron acceptor) adsorption. Eu-DOBDC results in the largest mass magnetization change upon adsorption of NO x due to more available unpaired f electrons. Experimental changes in magnetic moment were supported by density functional theory (DFT) simulations of NO x adsorbed in lanthanide Eu-DOBDC and transition metal Y-DOBDC MOFs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Colossal magnetoresistance in a nonsymmorphic antiferromagnetic insulator

Here we investigate antiferromagnetic Eu 5 In 2 Sb 6 , a nonsymmorphic Zintl phase. Our electrical transport data show that Eu 5 In 2 Sb 6 is remarkably insulating and exhibits an exceptionally large negative magnetoresistance, which is consistent with the presence of magnetic polarons. From ab initio calculations, the paramagnetic state of Eu 5 In 2 Sb 6 is a topologically nontrivial semimetal within the generalized gradient approximation (GGA), whereas an insulating state with trivial topological indices is obtained using a modified Becke–Johnson potential. Notably, GGA + U calculations suggest that the antiferromagnetic phase of Eu 5 In 2 Sb 6 may host an axion insulating state. Our results provide important feedback for theories of topological classification and highlight the potential of realizing clean magnetic narrow-gap semiconductors in Zintl materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Radiation-Induced Effects on the Extraction Properties of Hexa-n-octylnitrilo-triacetamide (HONTA) Complexes of Americium and Europium

The candidate An(III)/Ln(III) separation ligand hexa-n-octylnitrilo-triacetamide (HONTA) was irradiated under envisioned SELECT (Solvent Extraction from Liquid waste using Extractants of CHON-type for Transmutation) process conditions (n-dodecane/0.1 M HNO 3 ) using a solvent test loop in conjunction with cobalt-60 gamma irradiation. The extent of HONTA radiolysis and complimentary degradation product formation was quantified by HPLC-ESI-MS/MS. Further, the impact of HONTA radiolysis on process performance was evaluated by measuring the change in 243 Am and 154 Eu distribution ratios as a function of absorbed gamma dose. HONTA was found to decay exponentially with increasing dose, affording a dose coefficient of d = (4.48 ± 0.19) × 10 –3 kGy –1 . Multiple degradation products were detected by HPLC-ESI-MS/MS with dioctylamine being the dominant quantifiable species. Both 243 Am and 154 Eu distribution ratios exhibited an induction period of ~70 kGy for extraction (0.1 M HNO 3 ) and back-extraction (4.0 M HNO 3 ) conditions, after which both values decreased with absorbed dose. The decrease in distribution ratios was attributed to a combination of the destruction of HONTA and ingrowth of dioctylamine, which is capable of interfering in metal ion complexation. Furthermore, the loss of HONTA with absorbed gamma dose was predominantly attributed to its reaction with the n-dodecane radical cation (R˙ + ). These R˙ + reaction kinetics were measured for HONTA and its 241 Am and 154 Eu complexes using picosecond pulsed electron radiolysis techniques. All three second-order rate coefficients (k) were essentially diffusion limited in n-dodecane indicating a significant reaction pathway: k(HONTA + R˙ + ) = (7.6 ± 0.8) × 10 9 M –1 s –1 , k(Am(HONTA) 2 + R˙ + ) = (7.1 ± 0.7) × 10 10 M –1 s –1 , and k(Eu(HONTA) 2 + R˙ + ) = (9.5 ± 0.5) × 10 10 M –1 s –1 . HONTA-metal ion complexation afforded an order-of-magnitude increase in rate coefficient. Additional nanosecond time-resolved measurements showed that both direct and indirect HONTA radiolysis yielded the short-lived (< 100 ns) HONTA radical cation and a second long-lived (µs) species identified as the HONTA triplet excited state. The latter was confirmed by a series of oxygen quenching picosecond pulsed electron measurements, affording a quenching rate coefficient of k( 3 [HONTA]* + O 2 ) = 2.2 × 10 8 M –1 s –1 . Overall, both the HONTA radical cation and triplet excited state are important precursors to the suite of measured HONTA degradation products.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Metadynamics investigation of lanthanide solvation free energy landscapes and insights into separations energetics

Lanthanide ion solvation chemistry in nonaqueous phases is key to understanding and developing effective separation processes for these critical materials. Due to the complexity and inherent disorder of the solution phase, a comprehensive picture of the solvated metal ion is often difficult to generate solely from conventional spectroscopic approaches and electronic structure calculations, particularly in the extractant phase. In this work, we use classical molecular dynamics (MD) simulation with an advanced sampling technique, metadynamics, supplemented by experimental spectroscopy and speciation analysis, to measure lanthanide solvation free energy landscapes. We define coordination-based collective variables to probe the entire range of solvation configurations in the organic phase of lanthanum (La), europium (Eu), and lutetium (Lu) nitrate salts bound with a commonly used extractant, N,N′-dimethyl, N,N′-dioctylhexylethoxymalonamide (DMDOHEMA). The known lanthanide extraction trend of La ≈ Eu > Lu is readily explained by the measured free energy surfaces, which show consistent DMDOHEMA coordination from La to Eu, followed by loss of DMDOHEMA coordination from Eu to Lu. These simulations suggest how ligand crowding at the metal center can control selectivity, in this case resulting in the opposite extraction trend as observed with other conventional extractants, where the enthalpic contribution from increasing lanthanide charge density across the series dominates the extraction energetics. We also find that the presence of inner-sphere water, verified by time-resolved fluorescence, diversifies the accessible solvation structures. As a result, understanding solvation requires consideration of an entire thermodynamic ensemble, rather than the single dominant lowest-energy structure, as is often considered out of necessity in interpretation of spectroscopic data or in electronic structure-based ligand design approaches. In general, we demonstrate how metadynamics uniquely enables investigation of complex, multidimensional solvation energetic landscapes, and how it can explain selectivity trends where extraction is controlled by more complex mechanisms than simple charge density-based selectivity.

Wang, Xiaoyu↗
DOE OSTI2020

Evidence of Ba-substitution induced spin-canting in the magnetic Weyl semimetal EuCd 2 As 2

Recently EuCd 2 As 2 was predicted to be a magnetic Weyl semimetal with a lone pair of Weyl nodes generated by A-type antiferromagnetism and protected by a rotational symmetry. However, it was soon discovered that the actual magnetic structure broke the rotational symmetry and internal pressure was later suggested as a route to stabilize the desired magnetic state. In this work we test this prediction by synthesizing a series of Eu 1-x BaxCd 2 As 2 single crystals and studying their structural, magnetic, and transport properties via both experimental techniques and first-principles calculations. We find that small concentrations of Ba (~3%–10%) lead to a small out-of-plane canting of the Eu moment. However, for higher concentrations this effect is suppressed and a nearly in-plane model is recovered. Studying the transport properties we find that all compositions show evidence of an anomalous Hall effect dominated by the intrinsic mechanism as well as large negative magnetoresistances in the longitudinal channel. A nonmonotonic evolution of the transport properties is seen across the series which correlates to the proposed canting suggesting canting may enhance the topological effects. Careful density functional theory calculations using an all-electron approach revise prior predictions finding a purely ferromagnetic ground state with in-plane moments for both the EuCd 2 As 2 and Eu 0.5 Ba 0.5 Cd 2 As 2 compounds, corroborating our experimental findings. This work suggests that Ba substitution can tune the magnetic properties in unexpected ways which correlate to changes in measures of topological properties, encouraging future work to locate the ideal Ba concentration for Eu moment canting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

A -type antiferromagnetic order in the Zintl-phase insulator EuZn 2 P 2

Zintl phases, containing strongly covalently bonded frameworks with separate ionically bonded ions, have emerged as a critical materials family in which to couple magnetism and strong spin-orbit coupling to drive diverse topological phases of matter. Here we report the single-crystal synthesis, magnetic, thermodynamic, transport, and theoretical properties of the Zintl compound EuZn 2 P 2 that crystallizes in the anti-La 2 O 3 (CaAl 2 Si 2 ) P-3m1 structure, containing triangular layers of Eu 2+ ions. In-plane resistivity measurements reveal insulating behavior with an estimated activation energy of E g = 0.11eV. Specific heat and magnetization measurements indicate antiferromagnetic ordering at T N = 23K. Curie-Weiss analysis of in-plane and out of plane magnetic susceptibility from T = 150 to 300 K yields p eff = 8.61 for μ 0 H⊥c and p eff = 7.74 for μ 0 H//c, close to the expected values for the 4f 7 J = S = 7/2 Eu 2+ ion and indicative of weak anisotropy. Below T N , a significant anisotropy of χ ⊥ /χ // ≈ 2.3 develops, consistent with A-type magnetic order as observed in isostructural analogs and as predicted by the density functional theory calculations reported herein. The positive Weiss temperatures of θ W =19.2K for μ 0 H⊥c and θ W =41.9K for μ 0 H//c show a similar anisotropy and suggest competing ferromagnetic and antiferromagnetic interactions. Comparing Eu magnetic ordering temperatures across trigonal EuM 2 X 2 (M= divalent metal, X= pnictide) shows that EuZn 2 P 2 exhibits the highest ordering temperature, with variations in T N correlating with changes in expected dipolar interaction strengths within and between layers and independent of the magnitude of electrical conductivity. These results provide experimental validation of the crystochemical intuition that the cation Eu 2+ layers and the anionic (M 2 X 2 ) 2– framework can be treated as electronically distinct subunits, enabling further predictive materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Low-field magnetic anomalies in single crystals of the A-type square-lattice antiferromagnet EuGa 4

The body-centered-tetragonal antiferromagnet EuGa 4 was recently identified as a Weyl nodal-line semimetal that exhibits the topological Hall effect below its reported antiferromagnetic (AFM) ordering temperature T N = 15 – 16.5 K which we find to be T N = 16.4 ( 2 ) K. The Eu +2 ions are located at the corners and body centers of the unit cells. EuGa 4 exhibits A-type antiferromagnetic order below T N , where the Eu 2+ spin-7/2 moments are ferromagnetically aligned in the ab plane with the Eu moments in adjacent Eu planes along the c axis aligned antiferromagnetically. Low-field magnetization versus field M(H ab ) data at T = 2 K with the field aligned in the ab plane are reported that exhibit anomalous positive curvature up to a critical field H c1 at which a second-order transition occurs with H c1 ≈ 0.85 kOe for H∥ [1,1,0] and ≈ 4.8 kOe for H∥[1,0,0]. For larger fields, the linear behavior M ab = χ(T N ) H a b is followed until the critical field H c is reached at which all moments become aligned with the applied field. A theory is formulated for T = 0 K that fits the observed M(H ab ) behavior at T = 2 K well, where domains of A -type AFM order with fourfold rotational symmetry occur in the AFM state in zero field. The moments in the four domains reorient to become almost perpendicular to H ab at H c1 , followed by increasing canting of all moments toward the field with increasing field up to H c which is reported to be 71 kOe. A first-order transition in M(H ab ) at H ab = H c1 is predicted by the theory for T = 0 K when H ab is at a small angle from the [1,0,0] direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Anisotropic magnetism and electronic structure of trigonal EuAl 2 Ge 2 single crystals

Understanding the interplay between magnetic and electronic degrees of freedom is of profound recent interest in different Eu-based magnetic topological materials. Here, we studied the magnetic and electronic properties of the layered Zintl-phase compound EuAl 2 Ge 2 crystallizing in the trigonal CaAl 2 Si 2 -type structure. We report zero-field neutron diffraction, temperature T - and magnetic-field H-dependent magnetic susceptibility χ(T, H), isothermal magnetization M(T, H), heat capacity C p (T, H), and electrical resistivity ρ(T, H) measurements, together with T-dependent angle-resolved photoemission spectroscopy (ARPES) measurements complemented with first-principle calculations. EuAl 2 Ge 2 undergoes second-order A-type antiferromagnetic (AFM) ordering below T N = 27.5(5) K, with the Eu moments (Eu 2+ , S = 7/2) aligned ferromagnetically in the ab plane while these layers are stacked antiferromagnetically along the c axis. The critical fields at which all moments become parallel to the field are 37.5(5) and 52.5(5) kOe for H ∥ ab and H ∥ c, respectively. The H = 0 magnetic structure consists of trigonal AFM domains associated with ab-plane magnetic anisotropy and a field-induced reorientation of the Eu spins in the domains is also evident at T = 2 K below the critical field H c1 = 2.5(1) kOe. The ρ(T) measurements reveal metallic behavior transforming into a slight resistivity increase on cooling towards T N . A pronounced loss of spin-disorder scattering is observed below T N . The ARPES results show that EuAl 2 Ge 2 is metallic both above and below T N , and the Fermi surface is anisotropic with two hole pockets at the zone center and one small electron pocket at each M point. In the AFM phase, we directly observe folded bands in ARPES due to the doubling of the magnetic unit cell along the c axis with an enhancement of quasiparticle weight due to the complex change in the coupling between the magnetic moments and itinerant electrons on cooling below T N . The observed electronic structure is well reproduced by first-principle calculations, which also predict the presence of nontrivial electronic states near the Fermi level in the AFM phase with Z 2 topological numbers 1;(000)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Comparison and investigation of production of specific nuclides by different fission yield data

Generally, passive gamma spectroscopy (PGS) is known as a useful technique for nondestructive measurement of burnup and nuclide production in normal spent nuclear fuel. However, PGS can be used not only for normal spent fuel, but also for molten fuel generated in severe accidents involving core meltdowns. In such cases, it is estimated by the radioactivity ratios of specific nuclides. At the time of the decommissioning of the Three Mile Island's unit 2 reactor, fission products (FPs) such as Cs{sup 134}, Cs{sup 137}, Ce{sup 144}, Eu{sup 154}, Ru{sup 106}, and Sb{sup 125} were concerned. The radioactivity ratios are estimated by numerical simulations. However, there are various uncertainties in numerical simulations. In this study, we evaluated the effect of the difference in fission yield data. We compared the productions of concerned nuclides of Three Mile Island's unit 2 reactor by using Tokyo-tech and JENDL FP Fission Yields Data File 2011(FPY- 2011). Tokyo-tech is newly created by Tsubakihara et al. at Tokyo Institute of Technology. FPY-2011 is currently the latest fission yield data in Japan. In the concerned nuclides, the relative difference (Tokyo-tech/FPY-2011 -1) in the production of Sb{sup 125} is 4.5% and that of Eu{sup 154} is -5.6%. The relative difference in the production of Sb{sup 125} is found to be caused by the difference in the independent yields of Sn{sup 125}, In{sup 125}, Cd{sup 125}, Ag{sup 125}, and Pd{sup 125}. The relative difference in Eu{sup 154} is found to be caused by the relative difference in the production of Sm{sup 152} and the relative difference in the cumulative yield of Eu{sup 153}.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2026

Comparative Assessment of Battery Carbon Footprint Calculation Frameworks to Support U.S. Battery Manufacturing

A “battery passport” is a digital record that provides comprehensive information about an individual battery across its life cycle. This concept has been introduced by Battery Regulation (EU) 2023/1542 [1], which applies to batteries for electric vehicles (EVs), industrial batteries with a capacities greater than 2 kWh, and batteries for light means of transport (LMT) greater than 2kWh sold in the European Union (EU) market – impacting manufacturers and exporters across multiple jurisdictions globally. Among its reporting mandates, a key feature of battery passports is the requirement for a carbon footprint (CF) calculation methodology supported by enhanced data granularity to enable traceable and verifiable CF results. While no other jurisdictions have yet adopted formal battery passport requirements like the EU’s, some are developing CF calculation methods to comply with the EU Battery Regulation or are creating CF-related regulations that could evolve in a similar direction, reflecting the growing importance of battery CF guidelines for manufacturers seeking to remain competitive in global markets.

Zhang, Jingyi [Argonne National Laboratory (ANL), ↗
DOE OSTI2021

Measurement of Fission Product Concentration Profiles in AGR-3/4 TRISO Fuel Graphitic Matrix and Nuclear Graphites

The third Advanced Gas Reactor (AGR) irradiation experiment, AGR-3/4, was designed to investigate the migration of fission products in fuel compact graphitic matrix and reactor graphite components. Using destructive methods, radial fission product concentration profiles were measured for gamma-emitting fission products (e.g., Ag-110m, Cs-134, and Eu-154) and beta-emitting Sr-90 in irradiated graphitic and graphite components from six different AGR-3/4 irradiation capsules. These new measured concentration profiles can now be compared to non-destructive measurements and fission product transport simulations and will be used to derive new diffusivities and sorptivities to support refinement of fission product transport models and high-temperature gas-cooled reactor (HTGR) source-term analyses. Each capsule in the AGR-3/4 experiment had four fuel compacts in the middle of two concentric rings of graphitic matrix material, PCEA graphite, or IG-110 graphite. In addition to the approximately 1898 tristructural isotropic (TRISO) coated particles in each compact, there were 20 designed to fail (DTF) particles coated only in pyrocarbon so that they released fission products into the surrounding cylindrical rings of carbonaceous materials. Destructive sampling of the rings involved machining/milling material from around the circumference of the rings, collecting that material, and performing radiochemical analyses on it. Milling operations were performed in multiple steps or segments, and each segment was generally 0.508 mm (0.020 in) thick. Knowing the radial position at which each segment was milled, the volume of the milled material at each segment, and the fission product content in each segment, the radial fission product concentrations were constructed for select isotopes in each ring. Ag-110m profiles had the most variation. Some profiles were peaked at an inner or outer surface. Some were peaked at the middle of the ring wall thickness. Some increased radially outward, and some decreased radially outward. These types of variations and the fact that the measured profiles do not generally compare favorably with the transport model employed for AGR-3/4 may adversely impact the ability to extract reasonable transport parameters for this isotope. In many cases, the Cs-134 profiles decreased somewhat linearly in the outward radial direction, and in cursory comparisons, the shapes of these profiles appeared similar to those from model predictions. The step changes in concentration across the inner-outer ring gap were generally consistent with the model predictions as well. In some cases, there were local maxima in concentration at the outer surface of the rings. This suggests that fission products could have transported in the small gaps between the inner ring and the outer ring and between the outer ring and the sink ring such that some portion of a given fission product can bypass diffusion through the ring itself. The analysis of the small nubs on the outer surfaces of some of the outer rings revealed fission product concentrations in the nubs that were often higher than in the outermost segments of the rings. This further supports the hypothesis that short-circuit, gap transport occurred, causing relatively high surface concentrations on the outer surfaces of the rings. Eu-154 and Sr-90 profiles tend to have very similar shapes, suggesting that they transport via the same mechanisms. The observed profiles were indicative of a transport process where the isotopes are sorbed on the inner surface of the ring, but diffusion into the ring from that surface is quite slow. Some elevated concentrations of Sr-90 (relative to Eu-154) on the outer surface of a ring suggested that rapid, gas-gap transport of gaseous precursor Kr-90 and volatile Rb-90 could have occurred prior to their decaying to Sr-90. Overall, the Eu 154 and Sr-90 profiles were still very similar, which indicates that the transport of short-lived Sr-90 precursors is not a major effect. In some capsules, the qualitative Sr-90 behavior across the ring gaps was consistent with the model (using the available legacy Sr-90 transport parameters), but in other capsules the model was inconsistent with the measurements and seems to underestimate the amount of Sr-90 in the outer rings. The total ring Sr-90 inventories were estimated for all the rings that were subject to physical sampling. These results will be used to adjust the predicted particle and/or compact releases used in the AGR-3/4 fission product transport model. Given the different irradiation temperatures among the capsules and the rings, it was not possible to discern fundamental differences in the transport of isotopes within the different carbon materials, i.e., graphitic matrix, IG-110, or PCEA. It may be possible to do this in the course of determining transport from the concentration profiles in future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Gas-Phase Stability of Large Lanthanide:Ligand Clusters Evaluated Using Collision-Induced Dissociation

Introduction In the reprocessing of f-elements present in used nuclear fuels, a variety of diglycolamides (DGA’s) are used as extractants for actinide partitioning. In particular, the Actinide-Lanthanide Separation (ALSEP) process typically utilizes either the N,N,N’,N’-tetraoctyl diglycolamide (TODGA) or N,N,N',N'-tetra-2-ethylhexyl diglycolamide (T2EHDGA) extractant ligands following the partitioning of uranium and plutonium from used nuclear fuel. To better understand fundamental interactions in these processes, covalent bonding of several f-elements with diglycolamides, primarily TODGA, is investigated in the gas phase using nanospray ionization and a quadrupole time-of-flight mass spectrometer. Further, analysis of the identity and relative strength of the cluster is enabled by MS2 isolation and collision induced dissociation. Methods Metal ion cluster analysis was completed using a Bruker (Billerica, MA, USA) mircOTOF-Q II quadrupole time-of-flight mass spectrometer with a CaptiveSpray nanospray ion source. Detection was accomplished using positive ionization mode. Metal: ligand solutions were assembled as 30 µM europium nitrate, samarium nitrate, cerium nitrate, or holmium nitrate and 3 µM DGA in acetonitrile or a 50:50 mixture of acetonitrile: isopropanol. Preliminary data The samarium cluster experiments yielded clusters with a samarium:TODGA ratio of up to 1:7 able to be isolated and evidence of greater ratios present in the mass spectrum. This is surprising, as metal clusters are not expected to have a coordination space able to accommodate this many TODGA ligands, due to its size and tridenticity. Collisional activation of [Sm(TODGA)3]3+ suggested loss of a TODGA radical cation, in addition to ligand fragmentation. In contrast, activation of clusters with higher Sm:TODGA ratios resulted in loss of entire ligands, with no evidence of fragmentation. A lower collision energy was required to remove ligands as the number of bound TODGAs increased, suggesting that in larger clusters, ligands are more delicately complexed to the metal. In addition, several clusters were observed with the composition [Sm(NO3)x(TODGA)n x]+3 x. With a single nitrate ion, clusters with up to six TODGAs were able to be isolated. In a similar pattern to the samarium clusters containing only TODGA, less collision energy was required to eliminate one or more TODGAs with increasing size. Clusters with composition [Sm(NO3)(TODGA)n-1]2+ appeared in lower abundance and were more collisionally stable than [Sm(TODGA)n]3+ clusters. With two nitrate ions, only clusters with a single TODGA were able to be isolated. Analogous europium experiments resulted in similar clusters. Ratios of up to 1:7 Eu:TODGA and clusters with one nitrate and up to five TODGAs were isolated. In clusters with two nitrate ions, only one or two TODGAs were observed to be bound. Similar to samarium, MS2 experiments with the Eu clusters suggested that larger clusters required less collision energy to eliminate TODGA. Europium clusters with the composition [Eu(NO3)(TODGA)n-1]2+ were observed in greater abundance and with greater stability than the equivalent cluster with the composition [Eu(TODGA)n]3+. Novel Aspect These are the first reported Ln:TODGA clusters, allowing us to begin to investigate intrinsic complexation of lanthanides with process-relevant ligands.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

US critical materials strategy: The importance of innovation in obtaining supply chain security

Critical raw materials (CRMs) and/or critical minerals and materials (CMMs) are metals, metal groups, and non-metallic minerals essential for the many modern technologies, including wind turbine, electric vehicles and energy storage systems. Different countries have slightly different metrics for determining criticality. However, broadly speaking, the European Union (EU) and United States (US)both define them as materials that reach or exceed thresholds for both economic importance and supply risk. Furthermore, both organizations have implemented instruments, such as the EU's 2024 Critical Raw Materials Act and the US Department of Energy's (DOE) Critical Minerals and Materials Strategy, to facilitate research and development of CRM/CMM ranging from mineral deposit development to geometallurgy to separations to advanced manufacturing. This talk is aimed at an EU audience to explain the DOE CMM strategy and how it compares to the steps taken by the EU to facilitate progress. Furthermore, this talk takes a geology-centric approach on the challenges geoscientists face and how their roles may change in the future.

58 GEOSCIENCES↗
DOE OSTI2020

Materials Data on EuCdAu by Materials Project

EuAuCd crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. Eu is bonded in a 5-coordinate geometry to five equivalent Au atoms. There are a spread of Eu–Au bond distances ranging from 3.21–3.25 Å. Au is bonded in a 9-coordinate geometry to five equivalent Eu and four equivalent Cd atoms. There are a spread of Au–Cd bond distances ranging from 2.92–3.01 Å. Cd is bonded in a 4-coordinate geometry to four equivalent Au atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on EuCdPd by Materials Project

EuPdCd crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. Eu is bonded in a 5-coordinate geometry to five equivalent Pd atoms. There are a spread of Eu–Pd bond distances ranging from 3.15–3.20 Å. Pd is bonded in a 9-coordinate geometry to five equivalent Eu and four equivalent Cd atoms. There are three shorter (2.86 Å) and one longer (2.91 Å) Pd–Cd bond lengths. Cd is bonded in a 4-coordinate geometry to four equivalent Pd atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on EuZn by Materials Project

EuZn1 is Tetraauricupride structured and crystallizes in the cubic Pm-3m space group. The structure is three-dimensional. Eu is bonded in a body-centered cubic geometry to eight equivalent Zn atoms. All Eu–Zn bond lengths are 3.26 Å. Zn is bonded in a body-centered cubic geometry to eight equivalent Eu atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on EuAg2 by Materials Project

EuAg2 crystallizes in the orthorhombic Imma space group. The structure is three-dimensional. Eu is bonded in a 12-coordinate geometry to twelve equivalent Ag atoms. There are a spread of Eu–Ag bond distances ranging from 3.32–3.49 Å. Ag is bonded in a 10-coordinate geometry to six equivalent Eu and four equivalent Ag atoms. There are a spread of Ag–Ag bond distances ranging from 2.81–2.98 Å.

36 MATERIALS SCIENCE↗