Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Mesoscale Effects of Composition and Calendering in Lithium-Ion Battery Composite Electrodes

Macrohomogeneous battery models are widely used to predict battery performance, necessarily relying on effective electrode properties, such as specific surface area, tortuosity, and electrical conductivity. While these properties are typically estimated using ideal effective medium theories, in practice they exhibit highly non-ideal behaviors arising from their complex mesostructures. In this paper, we computationally reconstruct electrodes from X-ray computed tomography of 16 nickel–manganese–cobalt-oxide electrodes, manufactured using various material recipes and calendering pressures. Due to imaging limitations, a synthetic conductive binder domain (CBD) consisting of binder and conductive carbon is added to the reconstructions using a binder bridge algorithm. Reconstructed particle surface areas are significantly smaller than standard approximations predicted, as the majority of the particle surface area is covered by CBD, affecting electrochemical reaction availability. Finite element effective property simulations are performed on 320 large electrode subdomains to analyze trends and heterogeneity across the electrodes. Significant anisotropy of up to 27% in tortuosity and 47% in effective conductivity is observed. Electrical conductivity increases up to 7.5× with particle lithiation. We compare the results to traditional Bruggeman approximations and offer improved alternatives for use in cell-scale modeling, with Bruggeman exponents ranging from 1.62 to 1.72 rather than the theoretical value of 1.5. We also conclude that the CBD phase alone, rather than the entire solid phase, should be used to estimate effective electronic conductivity. This study provides insight into mesoscale transport phenomena and results in improved effective property approximations founded on realistic, image-based morphologies.

25 ENERGY STORAGE↗

Conductive trace interconnection tape

A conductive trace interconnect tape for use with a printed circuit board or a flexible circuit substrate comprises a top insulating layer, an electrically conductive layer, and a bottom insulating layer. The top insulating layer is formed from electrically insulating material and is configured to provide electrical isolation from electrically conductive objects that are positioned on top of the conductive trace interconnect tape. The electrically conductive layer is positioned underneath the top insulating layer. The electrically conductive layer is formed from electrically conductive material and includes electrical interconnect traces, electrical component pads, or electrically conductive planar portions. The bottom insulating layer is positioned underneath the electrically conductive layer. The bottom insulating layer is formed from electrically insulating material and is configured to provide electrical isolation from electrically conductive objects that are positioned on the printed circuit board or flexible circuit substrate.

Hatch, Stephen McGarry↗

Conductive trace interconnection tape

A conductive trace interconnect tape for use with a printed circuit board or a flexible circuit substrate comprises a top insulating layer, an electrically conductive layer, and a bottom insulating layer. The top insulating layer is formed from electrically insulating material and is configured to provide electrical isolation from electrically conductive objects that are positioned on top of the conductive trace interconnect tape. The electrically conductive layer is positioned underneath the top insulating layer. The electrically conductive layer is formed from electrically conductive material and includes electrical interconnect traces, electrical component pads, or electrically conductive planar portions. The bottom insulating layer is positioned underneath the electrically conductive layer. The bottom insulating layer is formed from electrically insulating material and is configured to provide electrical isolation from electrically conductive objects that are positioned on the printed circuit board or flexible circuit substrate.

Hatch, Stephen McGarry↗

RFID-Enabled Angular Position Sensing System

An angular position sensing system includes a first support with ring-shaped elements disposed thereon and spaced apart from one another in a curvilinear arrangement. Each ring-shaped element includes an electrically-conductive ring and an RFID integrated circuit electrically coupled to its electrically-conductive ring. A second support has an antenna coupled thereto that defines an electrically-conductive path commensurate in size and shape to at least a portion of the electrically-conductive ring. An interrogator transmits a signal to the antenna wherein electric current is generated along the antenna's electrically-conductive path and electromagnetic energy emanates from the antenna. Any ring-shaped element and its RFID integrated circuit energized by the electromagnetic energy generates in response a data transmission for receipt by the interrogator. A processor coupled to the interrogator derives information related to an angular position of one of the first support and second support using the data transmission.

Fink, Patrick W.↗

Temperature dependent thermoelectric properties of cuprous delafossite oxides

The use of nanostructured delafossite oxides in thermoelectric (TE) applications has attracted a great interest due to their high performance and long-term stability at elevated temperatures. Cuprous delafossites, CuMO 2 (M=Al, Cr, Fe, Ga, Mn), compared to conventional TE materials, such as Bi 2 Te 3 , PbTe and SiGe, are non-toxic and more earth abundant. In particular, CuAlO 2 compound shows a great potential for high performance thermoelectric materials. In this work, a systematic study of temperature dependent TE properties of cuprous delafossite materials, CuAlO 2 , is reported. The optimization of the TE properties has been realized by controlling nanostructure size around 80 nm CuAlO 2 powder was prepared using a solid-state synthesis method at ~1373 K in nitrogen/air atmosphere. The nanostructure size was controlled by a high energy ball milling process. Reducing the particle size of nanostructured bulk materials decouples interdependent electron and phonon transport and results in a lattice thermal conductivity decrease without deteriorating electrical conductivity. As a result, the high effective mass plays a dominant role in the high Seebeck coefficient and low electrical conductivity. The power factor reached ~0.78×10 -5 W/mK 2 at 780 K. Temperature dependent TE properties, including Seebeck coefficient, electrical conductivity, and thermal conductivity are analyzed. The processing-structure-property correlation of these materials are discussed.

36 MATERIALS SCIENCE↗

Gasket Assembly for Sealing Mating Surfaces

A pair of substantially opposed mating surfaces are joined to each other and sealed in place by means of an electrically-conductive member which is placed in proximity to the mating surfaces. The electrically-conductive member has at least one element secured thereto which is positioned to contact the mating surfaces, and which softens when the electrically-conductive member is heated by passing an electric current therethrough. The softened element conforms to the mating surfaces, and upon cooling of the softened element the mating surfaces are joined together in an effective seal. Of particular significance is an embodiment of the electrically-conductive member which is a gasket having an electrically-conductive gasket base and a pair of the elements secured to opposite sides of the gasket base. This embodiment is positioned between the opposed mating surfaces to be joined to each other. Also significant is an embodiment of the electrically-conductive member which is an electrically-conductive sleeve having an element secured to its inner surface. This embodiment surrounds cylindrical members the bases of which are the substantially opposed mating surfaces to be joined, and the element on the inner surface of the sleeve contacts the outer surfaces of the cylindrical members.

Bryant, Melvin A., III↗

Thermophysical properties of nitrogen plasmas under thermal equilibrium and non-equilibrium conditions

Calculated thermophysical properties of nitrogen plasmas in and out of thermal equilibrium are presented. The cut-off of the partition functions due to the lowering of the ionization potential has been taken into account, together with the contributions from different core excited electronic states. The species composition and thermodynamic properties are determined numerically using the Newton-Raphson iterative method, taking into account the corrections due to Coulomb interactions. The transport properties including diffusion coefficient, viscosity, thermal conductivity, and electrical conductivity are calculated using the most recent collision interaction potentials by adopting Devoto's electron and heavy particle decoupling approach, expanded to the third-order approximation (second-order for viscosity) in the framework of Chapman-Enskog method. Results are presented in the pressure range of 0.1 atm-10 atm and in electron temperature range from 300 to 40 000 K, with the ratio of electron temperature to heavy-particle temperature varied from 1 to 20. Results are compared with those from previous works, and the influences of different definitions of the Debye length are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermodynamic and transport properties of two-temperature SF{sub 6} plasmas

This paper deals with thermodynamic and transport properties of SF{sub 6} plasmas in a two-temperature model for both thermal equilibrium and non-equilibrium conditions. The species composition and thermodynamic properties are numerically determined using the two-temperature Saha equation and Guldberg-Waage equation according to deviation of van de Sanden et al. Transport properties including diffusion coefficient, viscosity, thermal conductivity, and electrical conductivity are calculated with most recent collision interaction potentials by adopting Devoto's electron and heavy particle decoupling approach but expanded to the third-order approximation (second-order for viscosity) in the frame of Chapman-Enskog method. The results are computed for various values of pressures from 0.1 atm to 10 atm and ratios of the electron temperature to the heavy particle temperature from 1 to 20 with electron temperature range from 300 to 40 000 K. In the local thermodynamic equilibrium regime, results are compared with available results of previously published studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-Situ Wire Damage Detection System

An in-situ system for detecting damage in an electrically conductive wire. The system includes a substrate at least partially covered by a layer of electrically conductive material forming a continuous or non-continuous electrically conductive layer connected to an electrical signal generator adapted to delivering electrical signals to the electrically conductive layer. Data is received and processed to identify damage to the substrate or electrically conductive layer. The electrically conductive material may include metalized carbon fibers, a thin metal coating, a conductive polymer, carbon nanotubes, metal nanoparticles or a combination thereof.

Williams, Martha K.↗

Nonstoichiometry and Transport Properties of Ca 3 Co 4 ±xO 9+δ (x = 0 – 0.4)

Nonstoichiometries of Ca 3 Co 4 O 9+δ and transport properties of Ca 3 Co 4±x O 9+δ were investigated. At 1100°C, Ca 3 Co 4 O 9+δ transformed to CaO and CoO. The reaction products offer a precise baseline for thermogravimetric analysis. At room temperature, δ in Ca 3 Co 4 O 9+δ is 0.38, which decreases at T ~450°C, indicating the onset point of the formation of oxygen vacancies, and δ is ~0.20 at 900°C. Correspondingly, the average Co valence state is 3.19 at room temperature and 3.10 at 900°C. In contrast to conventional defect chemistry theory in p-type oxide conductors, the formation of oxygen vacancies in Ca 3 Co 4 O 9+δ has a negligible impact on the carrier density of holes, indicating that oxygen vacancies and the redox couple responsible for hole carriers are in different layers. With control over the ratio of Ca/Co, the phase boundary for the misfit layered structure is between Ca 3 Co 3.95 O 9+δ and Ca 3 Co 4.05 O 9+δ . Beyond the phase boundary, the second phase is present, which effectively lowers the electrical conductivity while increasing the Seebeck coefficient.

36 MATERIALS SCIENCE↗

Semiconductor to Metal Transition in the Solids/Melts of Te and Pseudo-Binary of Hg1-xCdxTe for x = 0, 0.1 and 0.2

This paper reports the experimentally measured thermal and electrical conductivities from which the Lorenz numbers as functions of temperature were derived for the solids and melts of elemental Te and samples of Hg1-xCdxTe of x = 0, 0.1 and 0.2. The structural changes in the vicinity of the solid-liquid phase transition of elemental Te and various Hg1-xCdxTe solid solutions were assessed by closely examining these experimental properties and the derived Lorenz numbers. The values of Lorenz numbers for the solids of these samples were higher than the value of L0, i.e., the Lorenz number for the free electron gas derived by Sommerfeld, implying the characteristics of non-degenerate semiconductor. With the increasing value of x, or the larger bandgap, the materials become more non-degenerate with larger deviation from L0. As the solids started to melt, the measured values of Lorenz number for all samples started to decrease and eventually reached and maintained at values close to L0 at higher temperatures. The trend of the Lorenz number indicates that the transition from non-degenerate semiconductor of the solid samples to metal or degenerate semiconductor when the samples temperature reached above their liquidus temperatures.

thermal conductivity↗

Electric current-driven migration of electrically neutral particles in liquids

We design and experimentally demonstrate a migration of electrically neutral particles in liquids driven by electric current according to the discrepancies of their electrical conductivities. A force from electric current to electrically neutral particles has been identified to drive the particles toward the lateral surface from the centre of suspension via three distinguishable zones, namely, pushing, trapping, and expelling zones. The driving force can overtake gravity in practical cases. The property of the force is found neither similar to that of the force in electromagnetophoresis nor similar to that of the electromigration force in terms of direction and magnitude. An expression for the force at the pushing zone has been developed based on the numerical calculation of the thermodynamics of suspension fluids. The excellent agreement between numerical calculations and experimental data demonstrates that our calculation provides fundamental and predictive insight into particles separation from the liquids. Therefore, it is possible to use the force in many engineering applications such as separation of particles according to the differences of their electrical conductivities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrochemical Deposition Of Conductive Copolymers

Experiments show electrically conductive films are deposited on glassy carbon or indium tin oxide substrates by electrochemical polymerization of N-{(3-trimethoxy silyl) propyl} pyrrole or copolymerization with pyrrole. Copolymers of monomer I and pyrrole exhibit desired electrical conductivity as well as desired adhesion and other mechanical properties. When fully developed, new copolymerization process useful in making surface films of selectable conductivity.

Nagasubramanian, Ganesan↗

Highly transparent conductive electrode with ultra-low HAZE by grain boundary modification of aqueous solution fabricated alumina-doped zinc oxide nanocrystals

Commercial production of transparent conducting oxide (TCO) polycrystalline films requires high electrical conductivity with minimal degradation in optical transparency. Aqueous solution deposited TCO films would reduce production costs of TCO films but suffer from low electrical mobility, which severely degrades both electrical conductivity and optical transparency in the visible spectrum. Here, we demonstrated that grain boundary modification by ultra-violet laser crystallization (UVLC) of solution deposited aluminium-doped zinc oxide (AZO) nanocrystals results in high Hall mobility, with a corresponding dramatic improvement in AZO electrical conductance. The AZO films after laser irradiation exhibit electrical mobility up to 18.1 cm{sup 2} V{sup −1} s{sup −1} with corresponding electrical resistivity and sheet resistances as low as 1 × 10{sup −3} Ω cm and 75 Ω/sq, respectively. The high mobility also enabled a high transmittance (T) of 88%-96% at 550 nm for the UVLC films. In addition, HAZE measurement shows AZO film scattering transmittance as low as 1.8%, which is superior over most other solution deposited transparent electrode alternatives such as silver nanowires. Thus, AZO films produced by the UVLC technique have a combined figure of merit for electrical conductivity, optical transparency, and optical HAZE higher than other solution based deposition techniques and comparable to vacuumed based deposition methods.

36 MATERIALS SCIENCE↗

Embedded Heaters for Joining or Separating Plastic Parts

A proposed thermal-bonding technique would make it possible to join or separate thermoplastic parts quickly and efficiently. The technique would eliminate the need for conventional welding or for such conventional fastening components as bolted flanges or interlocking hooks. The technique could be particularly useful in the sign industry (in which large quantities of thermoplastics are used) or could be used to join plastic pipes. A thin sheet of a suitable electrically conductive material would be formed to fit between two thermoplastic parts to be joined (see figure). The electrically conductive sheet and the two parts would be put together tightly, then an electrical current would be sent through the conductor to heat the thermoplastic locally. The magnitude of the current and the heating time would be chosen to generate just enough heat to cause the thermoplastic to adhere to both sides of the electrically conductive sheet. Optionally, the electrically conductive sheet could contain many small holes to provide purchase or to increase electrical resistance to facilitate the generation of heat. After thermal bonding, the electrically conductive sheet remains as an integral part of the structure. If necessary, the electrically conductive sheet can be reheated later to separate the joined thermoplastic parts.

Bryant, Melvin A., III↗

MO-F-CAMPUS-I-01: EIT Imaging to Monitor Human Salivary Gland Functionality: A Feasibility Study

Purpose: Clinically, there exists a need to develop a non-invasive technique for monitoring salivary activity. In this study, we investigate the feasibility of a using the electrical conductivity information from Electrical Impedance Tomography (EIT) to monitor salivary flow activity. Methods: To acquire EIT data, eight Ag/AgCl ECG electrodes were placed around the mandible of the subject. An EIT scan was obtained by injecting current at 50 KHz, 0.4 mA through each pair of electrodes and recording voltage across other electrode pairs. The functional conductivity image was obtained through reconstruction of the voltage data, using Electrical Impedance Tomography and Diffuse Optical Tomography Reconstruction Software (EIDORS) in Matlab. In using EIDORS, forward solution was obtained using a user-defined finite element model shape and inverse solution was obtained using one-step Gaussian solver. EIT scans of volunteer research team members were acquired for three different physiological states: pre-stimulation, stimulation and post-stimulation. For pre-stimulation phase, data were collected in intervals of 5 minutes for 15 minutes. The salivary glands were then stimulated in the subject using lemon and the data were collected immediately. Post-stimulation data were collected at 4 different timings after stimulation. Results: Variations were observed in the electrical conductivity patterns near parotid regions between the pre- and post-stimulation stages. The three images acquired during the 15 minute pre-stimulation phase showed no major changes in the conductivity. Immediately after stimulation, electrical conductivity increased near parotid regions and 15 minutes later slowly returned to pre-stimulation level. Conclusion: In the present study involving human subjects, the change in electrical conductivity pattern shown in the EIT images, acquired at different times with and without stimulation of salivary glands, appeared to be consistent with the change in salivary gland activity. The conductivity changes imaged through EIT are potentially useful for the purpose of salivary monitoring.

60 APPLIED LIFE SCIENCES↗

Shockwave Consolidation of Nanostructured Thermoelectric Materials

Nanotechnology based thermoelectric materials are considered attractive for developing highly efficient thermoelectric devices. Nano-structured thermoelectric materials are predicted to offer higher ZT over bulk materials by reducing thermal conductivity and increasing electrical conductivity. Consolidation of nano-structured powders into dense materials without losing nanostructure is essential towards practical device development. Using the gas atomization process, amorphous nano-structured powders were produced. Shockwave consolidation is accomplished by surrounding the nanopowder-containing tube with explosives and then detonating. The resulting shock wave causes rapid fusing of the powders without the melt and subsequent grain growth. We have been successful in generating consolidated nano-structured bismuth telluride alloy powders by using the shockwave technique. Using these consolidated materials, several types of thermoelectric power generating devices have been developed. Shockwave consolidation is anticipated to generate large quantities of nanostructred materials expeditiously and cost effectively. In this paper, the technique of shockwave consolidation will be presented followed by Seebeck Coefficient and thermal conductivity measurements of consolidated materials. Preliminary results indicate a substantial increase in electrical conductivity due to shockwave consolidation technique.

Prasad, Narasimha S.↗

Ultralow thermal conductivity in all-inorganic halide perovskites

Significance Discovery of materials with low thermal conductivity in simple, fully dense, and single-crystalline solids has proven extremely challenging. This paper reports the discovery of ultralow thermal conductivity (∼0.4 W⋅m −1 ⋅K −1 ) in single-crystalline, all-inorganic halide perovskite nanowires, which is comparable to their amorphous limit value. We attribute ultralow thermal conductivity to a cluster rattling mechanism, based on strong phonon–phonon scattering via the coexistence of collective motions involving various atom groups. These results call attention to the vital thermal transport processes and thermal management strategies for applications with all-inorganic halide perovskites. Further, CsSnI 3 shows a rare combination of ultralow thermal conductivity and high electrical conductivity, so it can be a promising material for unique applications as an electrically conductive thermal insulator.

36 MATERIALS SCIENCE↗