Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Defects in gallium nitride nanowires: first principles calculations

Atomic configurations and formation energies of native defects in an unsaturated GaN nanowire grown along the [001] direction and with (100) lateral facets are studied using large-scale ab initio calculation. Cation and anion vacancies, antisites and interstitials in the neutral charge state are all considered. The nitrogen related defects are more stable than the gallium related defects under nitrogen-rich conditions. The configurations of these defects in the core region of the nanowire are same as those in the bulk GaN. The relaxation of vacancies is generally small, but the relaxation around antisite defects is large. The nitrogen interstitial relaxes into a split interstitial configuration. The configurations of the defects in the outermost free surface region are different than those in the core. A Ga atom on the outmost surface is replaced by a Ga interstital, and is ejected on to the surface to become an adsorbed atom. A gallium atom at the outermost surface can also be ejected out to become an adsorbed atom. Nitrogen interstitials form a split-interstitial configuration with one of the nearest-neighbor nitrogens. For a Ga vacancy at the edge of the side plane of the nanowire, nitrogen atom at a gallium site and nitrogen interstitial often induced the formation of N2 molecules with low formation energy, which agrees well with experiment findings [Nano Letters 9, 1844 (2009)].

36 MATERIALS SCIENCE↗

Defect production in strained p-type Si{sub 1-x}Ge{sub x} by Er implantation

Strained p-Si{sub 1-x}Ge{sub x} (x=5.3%, 10.2%, and 15.4%) was irradiated at room temperature with 160 keV {sup 166}Er{sup 2+} ions to a fluence of 1x10{sup 10} or 3x10{sup 13} Er/cm{sup 2}. The defects induced by ion implantation were investigated experimentally using high-resolution x-ray diffraction, Rutherford backscattering and channeling spectroscopy, and deep level transient spectroscopy. X-ray diffraction indicates that the damage induced by Er implantation produces a slight perpendicular expansion of the SiGe lattice. For all compositions, channeling measurements reveal that Er implantation in p-Si{sub 1-x}Ge{sub x} to a fluence of 3x10{sup 13} Er/cm{sup 2} induces an amorphous region below the Si{sub 1-x}Ge{sub x} surface. Annealing at 850 deg. C for 30 s, results in a reduction in damage density, a relaxation of the implantation-induced perpendicular expansion of the SiGe lattice in the implanted region, while a more pronounced relaxation of the compressive strain SiGe is observed for higher Ge content (x=0.10 and 0.15). On the other hand, for the annealed SiGe samples that were implanted with Er at the fluence of 10{sup 10} Er/cm{sup 2}, the compressive strain in the SiGe layer is nearly completely retained. Deep level transient spectroscopy studies indicate that two prominent defects with discrete energy levels above the valence band are introduced during Er implantation. Their activation energy was found to decrease with increasing Ge content. However, the relatively large local strain induced by high fluence Er implantation reduces the activation energy by 40 meV with respect to the low fluence Er implanted p-Si{sub 1-x}Ge{sub x}. This shift (40 meV) in the activation energy remains constant regardless of the Ge content, suggesting that the Si{sub 1-x}Ge{sub x} layers remained fully strained after Er implantation. The observed defects are further compared to those introduced by alpha particle irradiation and electron beam metal deposition. The results indicate that defects introduced by Er implantation have similar electronic properties as those of defects detected after electron beam deposition and alpha particle irradiation. Therefore, it is concluded that these defects are due to the Er implantation-induced damage and not to the Er species specifically.

36 MATERIALS SCIENCE↗

Defect Levels of Indium-doped CdMnTe Crystals

Using photoluminescence (PL) and current deep-level transient spectroscopy (I-DLTS), we investigated the electronic defects of indium-doped detector-grade CdMnTe:In (CMT:In) crystals grown by the vertical Bridgman method. We similarly analyzed CdZnTe:In (CZT:In) and undoped CdMnTe (CMT) crystals grown under the amount of same level of excess Te and/or indium doping level to detail the fundamental properties of the electronic defect structure more readily. Extended defects, existing in all the samples, were revealed by synchrotron white beam x-ray diffraction topography and scanning electron microscopy. The electronic structure of CMT is very similar to that of CZT, with shallow traps, A-centers, Cd vacancies, deep levels, and Te antisites. The 1.1-eV deep level, revealed by PL in earlier studies of CZT and CdTe, were attributed to dislocation-induced defects. In our I-DLTS measurements, the 1.1-eV traps showed different activation energies with applied bias voltage and an exponential dependence on the trap-filling time, which are typical characteristics of dislocation-induced defects. We propose a new defect-trap model for indium-doped CMT crystals.

36 MATERIALS SCIENCE↗

Intrinsic defect in BiNbO{sub 4}: A density functional theory study

Formation energies, transition energy levels, and electronic properties of various intrinsic defects in BiNbO{sub 4} systems are studied based on the first-principles density-functional theory. Our results indicate that the acceptor defects form easier than donor defects under O rich condition, while it is opposite under Bi rich condition. Under O-rich condition, Bi vacancies (Bi{sub vac}) leading to p-type conductivity are the dominant intrinsic defects, whereas O vacancies (O{sub vac}) inducing moderate n-type conductivity are the dominant intrinsic defects under Bi-rich condition. Among these intrinsic defects, O{sub vac} is a deep donor; to the contrary, Bi{sub vac} is found to be a shallow acceptor which is benefit to the separation and migration of the photogenerated carriers. Consequently, the BiNbO{sub 4} with Bi{sub vac} under O-rich growth condition should be of better photocatalytic performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of non-substitutional β-Sn defects in Ge{sub 1−x}Sn{sub x} alloys

Although group IV semiconductor alloys are expected to form substitutionally, in Ge{sub 1−x}Sn{sub x} this is true only for low concentrations (x < 0.13). The use of these alloys as a narrow gap semiconductor depends on the ability to produce samples with the high quality required for optoelectronic device applications. In a previous paper, we proposed the existence of a non-substitutional complex defect (β-Sn), consisting of a single Sn atom in the center of a Ge divacancy, which may account for the segregation of Sn at large x. Afterwards, the existence of this defect was confirmed experimentally. In this paper we study the local environment and the interactions of the substitutional defect (α-Sn), the vacancy in Ge, and the β-Sn defect by performing extensive numerical ab initio calculations. Our results confirm that a β-Sn defect can be formed by natural diffusion of a vacancy around the substitutional α-Sn defect, since the energy barrier for the process is very small.

36 MATERIALS SCIENCE↗

Vacancy-type defects in In{sub x}Ga{sub 1−x}N grown on GaN templates probed using monoenergetic positron beams

Native defects in In{sub x}Ga{sub 1−x}N layers grown by metalorganic chemical vapor deposition were studied using monoenergetic positron beams. Measurements of Doppler broadening spectra of the annihilation radiation and lifetime spectra of positrons for a 200-nm-thick In{sub 0.13}Ga{sub 0.87}N layer showed that vacancy-type defects were introduced by InN alloying, and the major species of such defects was identified as complexes between a cation vacancy and nitrogen vacancies. The presence of the defects correlated with lattice relaxation of the In{sub 0.13}Ga{sub 0.87}N layer and the increase in photon emissions from donor-acceptor-pair recombination. The species of native defects in In{sub 0.06}Ga{sub 0.94}N layers was the same but its concentration was decreased by decreasing the InN composition. With the layer thickness increased from 120 nm to 360 nm, a defect-rich region was introduced in the subsurface region (<160 nm), which can be associated with layer growth with the relaxation of compressive stress.

36 MATERIALS SCIENCE↗

First-principles DFT+U modeling of defect behaviors in anti-ferromagnetic uranium mononitride

A series of point defects in uranium mononitride (UN) have been studied by first-principles DFT+U calculations. The influence of intrinsic defects on the properties of UN was explored by considering the anti-ferromagnetic (AFM) order along the [001] direction. Our results show that all the point defects lead to obvious volume swelling of UN crystal. Energetically, the interstitial nitrogen defect is the most favorable one among single-point defects in UN crystal with the formation energy of 4.539 eV, while the N-Frenkel pair becomes the most preferable one among double-point defects. The AFM order induces obvious electron spin polarization of uranium towards neighboring uranium atoms with opposite spin orientations in UN crystal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simulation and analysis on ultrasonic testing for the cement grouting defects of the corrugated pipe

The defects exist in the cement grouting process of prestressed corrugated pipe may directly impair the bridge safety. In this paper, sound fields propagation in concrete structures with corrugated pipes and the influence of various different defects are simulated and analyzed using finite element method. The simulation results demonstrate a much complex propagation characteristic due to multiple reflection, refraction and scattering, where the scattering signals caused by metal are very strong, while the signals scattered by an air bubble are weaker. The influence of defect both in time and frequency domain are found through deconvolution treatment. In the time domain, the deconvolution signals correspond to larger defect display a larger head wave amplitude and shorter arrive time than those of smaller defects; in the frequency domain, larger defect also shows a stronger amplitude, lower center frequency and lower cutoff frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physisorption of molecular hydrogen on carbon nanotube with vacant defects

Physisorption of molecular hydrogen on single-walled carbon nanotubes (SWCNTs) is important for its engineering applications and hydrogen energy storage. Using molecular dynamics simulation, we study the physisorption of molecular hydrogen on a SWCNT with a vacant defect, focusing on the effect of the vacant defect size and external parameters such as temperature and pressure. We find that hydrogen can be physisorbed inside a SWCNT through a vacant defect when the defect size is above a threshold. By controlling the size of the defects, we are able to extract hydrogen molecules from a gas mixture and store them inside the SWCNT. We also find that external parameters, such as low temperature and high pressure, enhance the physisorption of hydrogen molecules inside the SWCNT. In addition, the storage efficiency can be improved by introducing more defects, i.e., reducing the number of carbon atoms on the SWCNT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Point defects and p-type conductivity in Zn{sub 1–x}Mn{sub x}GeAs{sub 2}

Positron annihilation spectroscopy is used to study point defects in Zn{sub 1–x}Mn{sub x}GeAs{sub 2} crystals with low Mn content 0≤x≤0.042 with disordered zincblende and chalcopyrite structure. The role of negatively charged vacancies and non-open-volume defects is discussed with respect to the high p-type conductivity with carrier concentration 10{sup 19}≤p≤10{sup 21}cm{sup −3} in our samples. Neutral As vacancies, together with negatively charged Zn vacancies and non-open-volume defects with concentrations around 10{sup 16}−10{sup 18}cm{sup −3}, are observed to increase with increasing Mn content in the alloy. The observed concentrations of defects are not sufficient to be responsible for the strong p-type conductivity of our crystals. Therefore, we suggest that other types of defects, such as extended defects, have a strong influence on the conductivity of Zn{sub 1–x}Mn{sub x}GeAs{sub 2} crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing origin of quasi-one dimensional current transport in defect rich two dimensional materials

The presence of defects in graphene have for a long time been recognized as a bottleneck for its utilization in electronic and mechanical devices. We recently showed that micro four-point probes may be used to evaluate if a graphene film is truly 2D or if defects in proximity of the probe will lead to a non-uniform current flow characteristic of lower dimensionality. In this work, simulations based on a finite element method together with a Monte Carlo approach are used to establish the transition from 2D to quasi-1D current transport, when applying a micro four-point probe to measure on 2D conductors with an increasing amount of line-shaped defects. Clear 2D and 1D signatures are observed at low and high defect densities, respectively, and current density plots reveal the presence of current channels or branches in defect configurations yielding 1D current transport. A strong correlation is found between the density filling factor and the simulation yield, the fraction of cases with 1D transport and the mean sheet conductance. The upper transition limit is shown to agree with the percolation threshold for sticks. Finally, the conductance of a square sample evaluated with macroscopic edge contacts is compared to the micro four-point probe conductance measurements and we find that the micro four-point probe tends to measure a slightly higher conductance in samples containing defects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combining of different data pools for calculating a reliable POD for real defects

Real defects are essential for the evaluation of the reliability of non destructive testing (NDT) methods, especially in relation to the integrity of components. But in most of the cases the amount of available real defects is not sufficient to evaluate the system. Model-assisted and transfer functions are one way to handle that challenge. This study is focused on a combination of different data pools to create a sufficient amount of data for the reliability estimation. A widespread approach for calculating the Probability of Detection (POD) was used on a radiographic testing (RT) method. The highest contrast to noise ratio (CNR) of each indication is usually selected as the signal in the 'â vs. a' (signal-response) approach for RT. By combining real and artificial defects (flat bottom holes, side drill holes, flat bottom squares, notches, etc) in RT the highest signals are close to each other, but the process of creating and evaluating real defects is much more complex. The solution is seen in the combination of real and artificial data using a weighted least square approach. The weights for real or artificial data were based on the importance, the value and the different detection behavior of the different data. For comparison, the alternative combination through the Bayesian Updating was also applied. As verification, a data pool with a large amount of real data was available. In an advanced approach for evaluating the digital RT data, the size of the indication (perpendicular to the X-ray beam) was introduced as additional information. The signal now consists of the CNR and the area of the indication. The detectability is changing depending on the area of the indication, a fact that was ignored in the previous POD calculations for RT. This points out that a weighted least square approach to pool the data might no longer be adequate. The Bayesian Updating of the estimated parameters of the relationship between the signal field (the area of the indication) and the geometry of the defects is seen as the appropriate model to combine the different defect types in a useful and meaningful way. This work was carried out together with the Finnish company for spent nuclear fuel and waste management - Posiva Oy. The digital RT is one of the NDT methods that might be used for the inspection of the weld of the copper canister to be used for the spent nuclear fuel in the Scandinavian concept of final disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Band gap control in a line-defect magnonic crystal waveguide

We report on the experimental observation of the spin wave spectrum control in a line-defect magnonic crystal (MC) waveguide. We demonstrate the possibility to control the forbidden frequency band (band gap) for spin waves tuning the line-defect width. In particular, this frequency may be greater or lower than the one of 1D MC waveguide without line-defect. By means of space-resolved Brillouin light scattering technique, we study the localization of magnetization amplitude in the line-defect area. We show that the length of this localization region depends on the line-defect width. These results agree well with theoretical calculations of spin wave spectrum using the proposed model of two coupled magnonic crystal waveguides. The proposed simple geometry of MC with line-defect can be used as a logic and multiplexing block for application in the novel field of magnonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization and modelling of the boron-oxygen defect activation in compensated n-type silicon

A study of the activation of the light-induced degradation in compensated n-type Czochralski grown silicon is presented. A kinetic model is established that verifies the existence of both the fast and the slow components known from p-type and proves the quadratic dependence of the defect generation rates of both defects on the hole concentration. The model allows for the description of lifetime degradation kinetics in compensated n-type silicon under various intensities and is in accordance with the findings for p-type silicon. We found that the final concentrations of the slow defect component in compensated n-type silicon only depend on the interstitial oxygen concentration and on neither the boron concentration nor the equilibrium electron concentration n{sub 0}. The final concentrations of the fast defect component slightly increase with increasing boron concentration. The results on n-type silicon give new insight to the origin of the BO defect and question the existing models for the defect composition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vacancy-type defects in Mg-doped GaN grown by ammonia-based molecular beam epitaxy probed using a monoenergetic positron beam

Vacancy-type defects in Mg-doped GaN were probed using a monoenergetic positron beam. GaN films with a thickness of 0.5–0.7 μm were grown on GaN/sapphire templates using ammonia-based molecular beam epitaxy and characterized by measuring Doppler broadening spectra. Although no vacancies were detected in samples with a Mg concentration [Mg] below 7 × 10{sup 19 }cm{sup −3}, vacancy-type defects were introduced starting at above [Mg] = 1 × 10{sup 20 }cm{sup −3}. The major defect species was identified as a complex between Ga vacancy (V{sub Ga}) and multiple nitrogen vacancies (V{sub N}s). The introduction of vacancy complexes was found to correlate with a decrease in the net acceptor concentration, suggesting that the defect introduction is closely related to the carrier compensation. We also investigated Mg-doped GaN layers grown using In as the surfactant. The formation of vacancy complexes was suppressed in the subsurface region (≤80 nm). The observed depth distribution of defects was attributed to the thermal instability of the defects, which resulted in the introduction of vacancy complexes during the deposition process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Defect phase diagram for doping of Ga 2 O 3

For the case of n-type doping of β-Ga 2 O 3 by group 14 dopants (C, Si, Ge, Sn), a defect phase diagram is constructed from defect equilibria calculated over a range of temperatures (T), O partial pressures (pO 2 ), and dopant concentrations. The underlying defect levels and formation energies are determined from first-principles supercell calculations with GW bandgap corrections. Only Si is found to be a truly shallow donor, C is a deep DX-like (lattice relaxed donor) center, and Ge and Sn have defect levels close to the conduction band minimum. The thermodynamic modeling includes the effect of association of dopant-defect pairs and complexes, which causes the net doping to decline when exceeding a certain optimal dopant concentration. The optimal doping levels are surprisingly low, between about 0.01% and 1% of cation substitution, depending on the (T, pO 2 ) conditions. Considering further the stability constraints due to sublimation of molecular Ga 2 O, specific predictions of optimized pO 2 and Si dopant concentrations are given. To conclude, the incomplete passivation of dopant-defect complexes in β-Ga 2 O 3 suggests a design rule for metastable doping above the solubility limit.

36 MATERIALS SCIENCE↗

Deep level defects and cation sublattice disorder in ZnGeN 2

The III-nitrides have revolutionized lighting technology and power electronics. Expanding the nitride semiconductor family to include the heterovalent ternary nitrides opens up new and exciting opportunities for device design that may help overcome some of the limitations of the binary nitrides as well as new applications. However, the more complex cation sublattice also gives rise to new complexities with both native and extrinsic defects, such as disorder on the cation sublattice. Here, depth-resolved cathodoluminescence spectroscopy and surface photovoltage spectroscopy measurements of defect energy levels in ZnGeN 2 combined with transmission microscopy and crystal lattice diffraction reveal optical signatures of mid-gap states that can be associated with cation sublattice disorder. The energies of these characteristic optical signatures in ZnGeN 2 thin films grown by metal-organic chemical vapor deposition are in good agreement with energy levels predicted by density functional theory for specific thermodynamically stable native point defects. To test the dependence of these defect signatures on crystal atomic composition, we correlated spatially-resolved optical and atomic composition measurements using spatially resolved x-ray photoelectron spectroscopy with systematically varied growth conditions on the same ZnGeN 2 films. The resultant elemental maps versus defect spectral energies and intensities suggest that cation antisite complexes (Zn Ge -Ge Zn ) versus isolated native point defects form preferentially and introduce mid-gap states that dominate electron-hole pair recombination. Complexing of Zn Ge and Ge Zn antisites manifests as disorder in the cation sub-lattice and leads to the formation of wurtzitic ZnGeN 2 as indicated by transmission electron microscopy diffraction patterns and x-ray diffraction (XRD) reciprocal space maps. Furthermore, these findings emphasize the importance of growth conditions to control cation place exchange.

42 ENGINEERING↗

Defects in Semiconductors

All semiconductors, whether by design or by accident, contain defects. The fundamental properties of defects, such as impurities, native defects, and extended defects, affect a broad range of applications. These technologically important defects may be introduced during growth and processing. Electrical, optical, and magnetic phenomena related to defects have been observed experimentally and studied theoretically in a variety of materials. In addition to traditional semiconductors (elemental, III–V, and II–VI), emerging materials include organic semiconductors, nitrides, oxides, and topological insulators, in bulk crystal and thin-film forms as well as low-dimensional and nanoscale structures.

36 MATERIALS SCIENCE↗