Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Characterizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Comprehensive Characterization of Mixed Metal Oxide Catalysts for Enhanced Catalyst Lifetime During Bio-Based C2-C6 Oxygenates to Olefins Processes (CRADA CRD-18-00728 Final Report)

Participant has developed mixed metal oxide (MMO) catalysts to selectively convert biomass-derived C2-C6 oxygenates to olefins and then hydrocarbon fuels to meet DOE 2022 fuel targets. Selective conversion ethanol to isobutylene with MMO catalysts (ZnOZrOx) requires low ethanol feeds to maintain performance. Increasing the feed results in rapid catalyst deactivation. Participant has increased catalyst stability by adding additional metal oxides. However, variations in performance based on the level and type of additive and catalytic conditions have been observed. This project will use advanced catalyst characterization methods through the ChemCatBio Advanced Catalyst Synthesis and Characterization (ACSC) project to gain insight into key catalyst features and deactivation modes with the goal of tailoring catalyst composition to improve performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Characterization of Extreme Hydroclimate Events in Earth System Models using ML/AI

Focal Area(s): (1) We put forward the concepts of data assimilation enabled by machine learning, AI, and advanced methods including experimental/network design/optimization and unsupervised learning applied to downscale information within Earth System Models (ESMs). (2) We discuss predictive modeling through the use of AI techniques and other tools to design a prediction system comprising of a hierarchy of models (e.g., AI-driven model/component/parameterization selection) to improve the characterization of extreme hydroclimate events in ESMs. The AI-based models will run five-six order of magnitude times faster, yet will provide similar accuracy, allowing us to provide range bounds on uncertainty faster and thus enabling faster extreme event identification. (3) Further, we consider the insight gleaned from complex data (observed/simulated) using AI, big data analytics, and other advanced methods, including explainable AI and physics- or knowledge-guided AI to improve the characterization of extreme hydroclimate events in ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Development and Application of a Data-Driven Methodology for Validation of Risk-Informed Safety Margin Characterization Models

The document is the Final Technical Progress Report for the Nuclear Energy University Program’s Integrated Research Project (IRP) on “Development and Application of a Data-Driven Methodology for Validation of Risk-Informed Safety Margin Characterization Models” that supports the LWR Sustainability Program’s RISMC R&D Pathway. The project goal is to develop and demonstrate a data-driven methodology for validation of advanced computer models used in nuclear power plant safety analysis. Specifically, the advanced computer models are those in the toolkit developed to support risk-informed safety margin characterization (RISMC), an integrated deterministic/probabilistic safety analysis methodology developed in the Department of Energy’s Light Water Reactor Sustainability (LWR-S) program. The report reflects the progress made towards the project’s stated goal by contributions by researchers and graduate students from universities, with support from researchers from national laboratories and industry companies. The project organization, effort coordination and technical implementation are summarized, followed by discussion of main findings, issues, and path forward. Selected chapters provide a more detailed description of tasks, approaches and respective findings and recommendations. Noteworthy are contributions that serve as guidelines for methodology development. It is also noted that this report is complemented by other milestone reports (as stand-alone deliverables) that provide detailed discussion of the technical developments. The project results have been documented in a number (12) dissertations and these, 50+ peer-reviewed publications in technical journals and conference proceedings.

42 ENGINEERING↗
DOE OSTI2021

Laser-based Adhesion Strength Measurements for Advanced Manufactured Sensor Adhesion Characterization

As part of the advanced manufacturing (AM) focus of the Nuclear Energy Enabling Technologies (NEET) Advanced Sensors and Instrumentation (ASI) Program, new in-house capabilities to fabricate and test novel active and passive in-pile sensors are being developed at the Idaho National Laboratory (INL). These advanced-manufactured sensors, such as peak temperature monitors and strain gauges, must be miniaturized and be able to provide real-time feedback, all while withstanding the coupled extremes of temperature and radiation typically observed in the environment of a nuclear test reactor. Fabricating durable and robust in-pile sensors with high fidelity requires a fundamental understanding of the optimal process parameters required in the AM technique, as well as the effect of deviations from optimal process parameters on the sensor-substrate adhesion and the ultimate robustness of the sensor. This report presents the use of a laser-based, non-contact approach for characterizing the adhesion of sensors manufactured using aerosol jet printing (AJP) that comprise of silver nanoparticle inks deposited and sintered on austenitic stainless steel (SS) 316L substrates. The effect of substrate surface roughness, surface energy, ink sintering time and sintering temperature on the printed sensor topography and the sensor-substrate adhesion has been systematically investigated. The sensor-substrate interfacial adhesion strength was determined from the critical laser pulse energy required to ablate/ detach the printed sensor from the substrate. Measurements of the sensor topography using optical profilometry revealed that post-deposition sintering at 400°C for 60 minutes resulted in a reduced sensor thickness, while plasma treating the substrate prior to printing yielded sensors with uniform thickness profiles transverse to the print direction. Sintering temperature and time were found to be the dominant parameters that affected sensor-substrate adhesion, followed by substrate surface roughness. The laser-based and locally-destructive approach for adhesion strength measurements shows promise in overcoming the challenges and limitations of current standardized peel tests and can be developed into a post-fabrication process control protocol for evaluating the durability of AM printed sensors in a high throughput fashion. Future studies will investigate the use of laser-induced spallation techniques as well as non-destructive laser ultrasonic methods for sensor-substrate adhesion characterization on sensors manufactured using AJP and other AM techniques such as plasma jet printing (PJP).

42 ENGINEERING↗
DOE OSTI2021

Commissioning of a Cask Enabling Characterization of Irradiated Nuclear Fuels with Pulsed Neutrons

Irradiation tests are a key component of nuclear fuel development and identifying typical and atypical regions in the irradiated fuel volume relies on very few characterization techniques. The goal of the effort reported here is to provide complementary measurements adding to the available parameter space for post irradiation examination as well as to inform subsequent hot cell PIE examinations by identifying typical and atypical regions with respect to microstructure, tomographic data, or isotope densities. Pulsed neutrons, enabling diffraction as well as energy-resolved neutron imaging and neutron absorption resonance spectroscopy, offer unique capabilities for this purpose. Time-of-flight neutron diffraction has the potential to offer efficient, non-destructive and non-contact microstructural characterization of irradiated fuel pins with spatial resolution of 1 mm 3 to 1 cm 3 while for energy-resolved neutron imaging (and by extension tomography) a resolution of 100 μm was demonstrated. The potential results include crystallinity vs. amorphous volumes and microstructural information such as phase compositions, lattice strains (indicative of residual stresses or chemistry variations) and textures from the diffraction data as well as distances (e.g. pellet to cladding), cracks, and isotopic distributions of minor actinides, fission products as well as fission gas partial pressures e.g. in the plenum from energy resolved neutron imaging.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

3D orthorhombic earth model effects on seismic source characterization

Most earth materials are anisotropic with regard to seismic wave-speeds, especially materials such as shales, or where oriented fractures are present. However, the base assumption for many numerical simulations is to treat earth materials as isotropic media. This is done for simplicity, the apparent weakness of anisotropy in the far field, and the lack of well-characterized anisotropic material properties for input into numerical simulations. One approach for addressing the higher complexity of actual geologic regions is to model the material as an orthorhombic medium. We have developed an explicit time-domain, finite-difference (FD) algorithm for simulating three-dimensional (3D) elastic wave propagation in a heterogeneous orthorhombic medium. The objective of this research is to investigate the errors and biases that result from modeling a non-isotropic medium as an isotropic medium. This is done by computing “observed data” by using synthetic, anisotropic simulations with the assumption of an orthorhombic, anisotropic earth model. Green’s functions for an assumed isotropic earth model are computed and then used an inversion designed to estimate moment tensors with the “observed” data. One specific area of interest is how shear waves, which are introduced in an anisotropic model even for an isotropic explosion, affect the characterization of seismic sources when isotropic earth assumptions are made. This work is done in support of the modeling component of the Source Physics Experiment (SPE), a series of underground chemical explosions at the Nevada National Security Site (NNSS).

58 GEOSCIENCES↗
DOE OSTI2023

Characterization of the Soluble and Insoluble Portions of Solids from the Salt Waste Processing Facility Tank 201 and Tank 202 Samples

The Salt Waste Processing Facility (SWPF) Tank 201 and Tank 202 samples have been characterized using X-ray diffraction (XRD), scanning electron microscope/energy dispersive x-ray (SEM/EDX), particle size analysis (PSA-Microtrac), Fourier transform-infrared (FT-IR) and nuclear magnetic resonance ( 1 H NMR) spectroscopic techniques to characterize and identify organic and inorganic components in Tanks 201 and 202 as part of efforts to understand the problems occurring at SWPF due to the presence of solids in the recovered solvent.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Characterization of the Fusion Zone in Laser Beam Welds on SS304L

Designing a welded joint requires consideration of the welding process, component/assembly structure and weld geometry, material composition, properties, and desired joint performance. The designer must also specify a set of acceptance criteria used to evaluate the welds. This study was conducted to support the design team responsible for specifying the spot weld profile by investigating the relationship between weld process parameters and the weld geometry and properties to further inform design optimization. The subjects of this study are two thin stainless steel 304L (SS304L) components joined by Laser Beam Welding (LBW). The components are the Housing, which contains flexible circuitry, and the Cover that protects the circuitry during handling, installation, and under service loads. Figure 1 illustrates coupon versions of the Cover and Housing used to simulate the interface between these components for weld testing. These coupon representations of assembly components were designed to match the material and relevant geometry related to the welded joint while other features not relevant to the welded joint are excluded.The objective of this study was to characterize the sensitivity of the weld geometry and mechanical properties to the input weld parameters to inform further Finite Element Analysis (FEA) efforts in balancing joint strength against assembly deformation caused by the welding process. Characterization was accomplished by varying laser welding parameters around the current design values and measuring weld geometry on the cross-sections. Nanoindentation with a spherical and flat-ended tip was used on polished section cuts of the weld to obtain direct estimates of the stress-strain response of the Fusion Zone (FZ) for comparison to the Base Metal (BM).

42 ENGINEERING↗
DOE OSTI2022

U.S. Building Stock Characterization Study: A National Typology for Decarbonizing U.S. Buildings

To support the U.S. Department of Energy's (DOE's) Advanced Building Construction (ABC) Collaborative, the National Renewable Energy Laboratory (NREL) has been tasked with characterizing the U.S. building stock and developing a national typology of buildings. The potential use cases of such a typology are flexible and evolving, but in this initial phase, the primary intention is to help identify technology requirements and engineering solutions for moving the U.S. building stock toward a zero-carbon future by mid-century. This typology will also support the development of appropriate ABC research goals for existing buildings, such as cost targets for new technology development, and in a later phase, the typology can be used to support the implementation of ABC solutions by informing market aggregation and business model development. The ABC Initiative invests in new technologies that enable high building performance, can be deployed quickly with minimal onsite construction time, and are affordable and appealing to building owners, investors, and occupants. Funding awardees use many innovations, including new building materials, 3D printing, offsite manufacturing, robotics, and digital art-to-part. Although the goals of ABC cover a broad range of objectives around energy, comfort, and health, the primary ABC-related application of this national building characterization study is the development of retrofit packages that can be applied to reduce thermal loads in buildings. Retrofit packages will be determined collaboratively by the DOE and the ABC Collaborative. We anticipate a range of upgrade measures covering envelope-, HVAC-, and water-heating-related loads.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

SDU 7 Shotcrete Sample Characterization

On 12/26/2021, pieces of the outer layer of shotcrete (Layer 8) fell off bottom of SDU7. The affected area was about 5 ft by 40 ft. The non-conforming condition was documented in 2021-NCR-05-0042 on 12/27/2021. Subsequently, additional shotcrete sections delaminated. Savannah River National Laboratory was requested to characterize the delaminated shotcrete by Saltstone Engineering in Technical Assistance Request U-TAR-Z-00003, Rev. 0. After the initial collection of delaminated pieces of Layer 8 on January 7 , 2022, additional questions arose related to the bond integrity between SDU 7 Layers 6, 7, and 8 and through layer cracking. As a result, two additional sampling efforts were conducted which resulted in additional characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of Multi-Material Interfaces Within Fibrous Structures (CRADA Final Report)

This project aimed to characterize the electrical, ionic, and thermal material properties of printed materials onto various textile and leather substrates. Furthermore, the material interfaces were investigated as well via characterization techniques such as SEM, TEM, and FTIR for example. Results from these studies will be utilized to properly formulate and tune process variables for enhancing the durability of devices and mitigate risks during commercial scale manufacturing studies of interest to Funxion’s product development.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Functional characterization and regulatory modeling of lignocellulose deconstruction in the saprophytic bacterium Cellvibrio japonicus (Final Technical Report)

The goal of this project was to establish a fundamental systems-level model of lignocellulose deconstruction by saprophytic soil bacteria while simultaneously identifying and characterizing novel enzymes that can be used for applied bioenergy technologies. This project was significant because it elevated our mechanistic and regulatory understanding of bacterial plant biomass degradation and led to technologies to enable bottlenecks in biofuel production R&D. Furthermore, the completed work was novel because it integrated in vivo, in vitro, and in silico approaches with bioenergy-relevant substrates. We identified the required enzymes for lignocellulose degradation and mechanisms of regulation through a combination of transcriptomic profiling (RNAseq), enzymatic analysis, the functional characterization of mutants, and modeling of the regulatory networks used to detect and degrade lignocellulose. This project employed the lignocellulose-degrading bacterium Cellvibrio japonicus to dissect the functional properties and underlying regulatory networks saprophytic bacteria use to depolymerize and utilize lignocellulose. There were four Objectives to this project, the specific metrics of which are summarized in this report.

09 BIOMASS FUELS↗
DOE OSTI2022

Characterization of DWPF Melter Primary Off-Gas Line Pluggage Deposits

This report details results from characterization of the Defense Waste Processing Facility (DWPF) melter off-gas pluggage deposits collected in late calendar year 2021 from the outlet of the jumper immediately preceding the quencher. DWPF requested through a technical assistance request characterization of the melter off-gas deposits by X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDAX), chemical analysis and both aqueous and organic leaching of the solids.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Development of a Novel Electrical Characterization Technique for Measuring Hidden Joint Contacts in Weapons Cavities (LDRD Final Report 218470)

This report summarizes research performed in the context of a REHEDS LDRD project that explores methods for measuring electrical properties of vessel joints. These properties, which include contact points and associated contact resistance, are “hidden” in the sense that they are not apparent from a computer-assisted design (CAD) description or visual inspection. As is demonstrated herein, the impact of this project is the development of electromagnetic near-field scanning capabilities that allow weapon cavity joints to be characterized with high spatial and/or temporal resolution. Such scans provide insight on the hidden electrical properties of the joint, allowing more detailed and accurate models of joints to be developed, and ultimately providing higher fidelity shielding effectiveness (SE) predictions. The capability to perform high-resolution temporal scanning of joints under vibration is also explored, using a multitone probing concept, allowing time-varying properties of joints to be characterized and the associated modulation to SE to be quantified.

42 ENGINEERING↗
DOE OSTI2022

Cross-Cutting Metrology Tools for In Operando Characterization of Carrier Dynamics in Photovoltaic Devices (Final Technical Report)

Understanding the nature of recombination and its dependence on defects and interfaces is essential for engineering materials and contacts for higher V oc and photovoltaic (PV) efficiency. Time-resolved photoluminescence (TRPL) has conventionally been used to evaluate recombination, but not all materials are strongly emissive or otherwise suitable. Time-resolved terahertz spectroscopy is a pump – probe method that presents valuable complementary information, wherein an optical pump pulse photoexcites carriers within the absorber and the transient photoconductivity is probed with a terahertz pulse. Until now, experimental constraints have prohibited the use of terahertz probes to interrogate full device stacks, and measurements were instead made on exfoliated films or films grown on unconventional substrates. However, interfaces are critical to the behavior of photoexcited carriers in solar cells, and the substrates themselves often influence the film growth and bulk properties. Therefore, it is important to probe the behavior of PV absorbers as close as possible to their normal operating conditions. Here we have developed cross-cutting metrology that enable in operando characterization of carrier dynamics and recombination mechanisms in working PV devices. Through a combination of complementary non-contact TRTS and TRPL experiments and modeling, we have obtained key parameters including photoexcited carrier bulk lifetime and interface and back surface recombination velocities with greater precision and accuracy than can be achieved with conventional TRPL alone. By varying pulsed photoexcitation conditions, the contributions of interface and bulk recombination mechanisms can be determined. We have developed and refined this characterization approach by investigating CdTe PVs, which is a well-established technology but with significant margin for further improvements in efficiency. Results were published in Journal of Applied Physics (DOI: 10.1063/5.0064730) and Proceedings of the IEEE PVSC (DOI: 10.1109/PVSC43889.2021.9518559). After validating the approach, we have applied it to correlate recombination rates to processing conditions and material properties, including composition and defects as well as interfaces and surface treatments. Such feedback can inform processing and design choices to enable higher PV efficiency, not only for CdTe, but also CdSe x Te 1-x , CIGS, perovskites, kesterites, and future technologies. A perspective on predicting solar cell performance from terahertz spectroscopy was published in Advanced Energy Materials (DOI: 10.1002/aenm.202102776). The cross-cutting metrology tools developed here will enable determination of the locus and mechanism of performance-limiting recombination in thin film PV devices. This feedback can guide the engineering of PV devices with higher V oc and efficiency, thereby leading to reductions in levelized cost of electricity to meet the SunShot 2030 target of $0.03/kWh for utility-scale PV. Lower costs will enable rapid expansion of renewable electricity generation that is nearly free of carbon emissions. Reducing carbon emissions of the electricity sector is one of the most important solutions to climate change. The project’s specific focus on CdTe PV can benefit First Solar, the US company that is the global leader in CdTe technology, through both technology and workforce development.

14 SOLAR ENERGY↗
DOE OSTI2022

Characterization of Saltstone Grout Line Samples

During a prestart recirculation operation in the Saltstone Processing Facility (SPF), operations staff noticed hardened scaling falling into the hopper. As a result, SPF operators and Saltstone Engineering decided to postpone operation and conduct a process room hopper cleanout. During the cleanout effort personnel noted greater than normal buildup of damp solid material in the transfer line. A borescope investigation was conducted and confirmed buildup was present throughout the transfer line to the downstream valves. Savannah River National Laboratory personnel were asked to characterize the scale material and samples collected from the saltstone grout line and provide recommendations and/or further guidance as to whether additional corrosion testing is needed for useful equipment operating life information. Based on the samples characterized results, the plug material contained only the 60:40 slag:fly ash saltstone. Portland cement in the original 10:45:45 Portland cement:slag:fly ash mix may result in a less abrasive slurry compared to the 60:40 slag:fly ash mix because the slag is > 95 % crushed angular, sharp edged glass. Saltstone grout erosion and corrosion testing of A36 carbon steel is needed to determine if the 60:40 mix is more abrasive and corrosive for A36 carbon steel than the 10:45:45 mix.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Characterization of the Soluble and Insoluble Portions of Solids from the Salt Waste Processing Facility Tank 201 and Tank 202 Samples

The Salt Waste Processing Facility (SWPF) Tank 201 and Tank 202 samples have been characterized using X-ray diffraction (XRD), scanning electron microscope/energy dispersive x-ray (SEM/EDX), particle size analysis (PSA-Microtrac), Fourier transform-infrared (FT-IR) and nuclear magnetic resonance ( 1 H NMR) spectroscopic techniques to characterize and identify organic and inorganic components in Tanks 201 and 202 as part of efforts to understand the problems occurring at SWPF due to the presence of solids in the recovered solvent.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Research tool development for catalyst, catalyst/ionomer, and ionomer characterization above 100°C (CRADA Final Report)

There is a need to develop experimental tools that address the catalyst and ionomer interface under high-temperature proton-exchange-membrane (HT-PEM) operating conditions (dry, >100°C). These conditions mean traditional water-based measurements for membrane and ionomer properties are insufficient; new ex-situ techniques are required to address and characterize expected novel materials. In this project we develop a microelectrode cell for high temperature kinetics and gas transport properties and ex-situ ionomer thin-film characterization under these conditions. We use baseline Nafion and phosphoric-acid imbibed membranes as prototype materials for measuring the membrane/acid/ionomer systems with Pt microelectrodes and demonstrate feasibility of the tools.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗