Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Nucleation and growth of oxide islands during the initial-stage oxidation of (100)Cu-Pt alloys

The initial-stage oxidation of (100) Cu-Pt alloys has been examined by in situ environmental transmission electron microscopy and ex situ atomic force microscopy (AFM). It is shown that the oxidation proceeds via the nucleation and growth of Cu{sub 2}O islands that show dependence on the alloy composition and oxidation temperature. The kinetic measurements on the oxide nucleation reveal that both the nucleation density and surface coverage of Cu{sub 2}O islands can be promoted by alloying more Pt in the Cu-Pt alloys. Increasing the oxidation temperature above 700 °C results in the growth of large Cu{sub 2}O islands that transits to a dendritic growth morphology. The ex situ AFM studies reveal that the nucleation of oxide islands can occur on surface terraces and the subsequent oxide growth depletes local terrace Cu atoms that results in the formation of surface pits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stable Copper-Nitrosyl Formation By Nitrite Reductase in Either Oxidation State

Nitrite reductase (NiR) is an enzyme that uses type 1 and type 2 copper sites to reduce nitrite to nitric oxide during bacterial denitrification. A copper-nitrosyl intermediate is a proposed, yet poorly characterized feature of the NiR catalytic cycle. This intermediate is formally described as Cu(I)-NO{sup +} and is proposed to be formed at the type 2 copper site after nitrite binding and electron transfer from the type 1 copper site. In this study, copper-nitrosyl complexes were formed by prolonged exposure of exogenous NO to crystals of wild-type and two variant forms of NiR from Alcaligenes faecalis (AfNiR), and the structures were determined to 1.8 {angstrom} or better resolution. Exposing oxidized wild-type crystals to NO results in the reverse reaction and formation of nitrite that remains bound at the active site. In a type 1 copper site mutant (H145A) that is incapable of electron transfer to the type 2 site, the reverse reaction is not observed. Instead, in both oxidized and reduced H145A crystals, NO is observed bound in a side-on manner to the type 2 copper. In AfNiR, Asp98 forms hydrogen bonds to both substrate and product bound to the type 2 Cu. In the D98N variant, NO is bound side-on but is more disordered when observed for the wild-type enzyme. The solution EPR spectra of the crystallographically characterized NiR-NO complexes indicate the presence of an oxidized type 2 copper site and thus are interpreted as resulting from stable copper-nitrosyls and formally assigned as Cu(II)-NO{sup -}. A reaction scheme in which a second NO molecule is oxidized to nitrite can account for the formation of a CuD-NO{sup -} species after exposure of the oxidized H145A variant to NO gas.

08 HYDROGEN↗

Optical and electrical properties of Cu-based all oxide semi-transparent photodetector

Zero-bias operating Cu oxide-based photodetector was achieved by using large-scale available sputtering method. Cu oxide (Cu{sub 2}O or CuO) was used as p-type transparent layer to form a heterojunction by contacting n-type ZnO layer. All metal-oxide materials were employed to realize transparent device at room temperature and showed a high transparency (>75% at 600 nm) with excellent photoresponses. The structural, morphological, optical, and electrical properties of Cu oxides of CuO and Cu{sub 2}O are evaluated in depth by UV-visible spectrometer, X-ray diffraction, scanning electron microscopy, atomic force microscopy, Kelvin probe force microscopy, and Hall measurements. We may suggest a route of high-functional Cu oxide-based photoelectric devices for the applications in flexible and transparent electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-vitro study of copper doped SiO{sub 2}-CaO-P{sub 2}O{sub 5} system for bioactivity and antimicrobial properties

Samples of the xCuO-(45-x)CaO-10P{sub 2}O{sub 5}-45SiO{sub 2} system (x varies from 0 to 4 mole%) have been synthesized for application as biomaterials to slow or inhibit the growth of living organisms (fungi and other pathogenic microorganisms) by the combination of sol-gel and co-precipitation processes. Prepared samples have been characterized by X-Ray Diffraction, Fourier Transform Infra-Red and Field Emission Scanning Electron Microscopy techniques before and after immersion in simulated body fluid. Antimicrobial activity of samples has been investigated against Staphylococcus aureus. Releasing of Cu{sup 2+}and other ions in the simulated body fluid has been determined by Atomic Absorption Spectroscopy to ensure the use of prepared material as biomaterial with good antibacterial properties.

36 MATERIALS SCIENCE↗

Using first principles calculations to interpret XANES experiments: extracting the size-dependence of the ( p , T ) phase diagram of sub-nanometer Cu clusters in an O 2 environment

Here, we have used ab initio density functional theory together with ab initio atomistic thermodynamics, and in situ X-ray absorption near edge spectroscopy (XANES) experiments, to study the oxidation of sub-nanometer clusters of Cu n O x supported on a hydroxylated amorphous alumina substrate in an O 2 -rich environment. We obtain ( p , T ) phase diagrams; these differ notably for the nanoclusters compared to the bulk. Both theory and experiment suggest that in the presence of oxygen, the cluster will oxidize from its elemental state to the oxidized state as temperature decreases. We obtain a clear trend for the transition Cu n → Cu n O n/2 : we see that smaller the cluster, greater is the tendency toward oxidation. However, we do not see a monotonic size-dependent trend for the transition Cu n O n/2 → Cu n O n . We suggest that theoretically computed Bader charges constitute a simple yet quantitative way to align experimental measures of XANES edges with theoretical calculations, so as to yield oxidation states for nanoclusters. Our results have important implications for the use of small clusters in fields such as nanocatalysis and nanomedicine.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural studies of ZnS:Cu (5 at %) nanocomposites in porous Al{sub 2}O{sub 3} of different thicknesses

We present EXAFS, XANES, and X-ray diffraction data on nanoscale ZnS:Cu (5 at %) structures fabricated by the thermal deposition of a ZnS and Cu powder mixture in porous anodic alumina matrices with a pore diameter of 80 nm and thicknesses of 1, 3, and 5 μm. The results obtained are compared with data on ZnS:Cu films deposited onto a polycor surface. According to X-ray diffraction data, the samples contain copper and zinc compounds with sulfur (Cu{sub 2}S and ZnS, respectively); the ZnS compound is in the cubic (sphalerite) and hexagonal (wurtzite) modifications. EXAFS and XANES studies at the K absorption edges of zinc and copper showed that, in samples deposited onto polycor and alumina with thicknesses of 3 and 5 μm, most copper atoms form the Cu{sub 2}S compound, while, in the sample deposited onto a 1-μm-thick alumina layer, copper atoms form metallic particles on the sample surface. Copper crystals affect the Zn–S interatomic distance in the sample with a 1-μm-thick porous Al{sub 2}O{sub 3} layer; this distance is smaller than in the other samples.

36 MATERIALS SCIENCE↗

The onset of sub-surface oxidation induced by defects in a chemisorbed oxygen layer

We investigate the onset of internal oxidation of a Cu(110) surface induced by oxygen subsurface adsorption via defects in the Cu(110)–(2 × 1)–O chemisorbed layer. The presence of a boundary formed by merged add-row structure domains due to a mismatch of half unit-cell leads to preferred oxygen adsorption at the subsurface tetrahedral sites. The resulting distorted Cu–O tetrahedra along the domain boundary have comparable bond length and angles to those of the bulk oxide phase of Cu{sub 2}O. Our results indicate that the presence of defects in the oxygen-chemisorbed adlayer can lead to the internal oxidation via the formation of Cu{sub 2}O-like tetrahedra in between the topmost and second outermost atomic layers at the oxygen coverage θ = 0.53 and the second and third outermost atomic layers at θ = 0.56. These results show that the internal oxidation of a metal surface can occur in the very beginning of the oxygen chemisorption process enabled by the presence of defects in the oxygen chemisorbed layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Behavior of Ga, In, Sn, and Te in Copper Matte Smelting

The distributions of Ga, In, Sn, and Te between copper-iron mattes and silica-saturated iron silicate slags over a wide range of matte grades 55 to 75 pct Cu were determined at 1300 °C using a gas-phase equilibration-quenching technique and direct phase composition analysis by Electron Probe X-ray Microanalysis and Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry. Alumina from aluminum, a typical minor element of electric and electronic copper scrap, and lime were adopted as slag modifiers for increasing the trace element recoveries. Gallium and tin were distributed predominantly in the slag, indium preferred sulfide matte at low matte grades and slag at high, whereas tellurium strongly favored the sulfide matte in particular in high matte grades. The slag modifiers alumina and lime had a minor impact on the distribution coefficients of gallium and tin, but for indium and tellurium the distribution coefficients were more strongly affected by the basic oxides. The strong tendencies of tin and tellurium to vaporize at the experimental temperature were confirmed.

36 MATERIALS SCIENCE↗

Evaluation of reaction mechanism of coal-metal oxide interactions in chemical-looping combustion

The knowledge of reaction mechanism is very important in designing reactors for chemical-looping combustion (CLC) of coal. Recent CLC studies have considered the more technically difficult problem of reactions between abundant solid fuels (i.e. coal and waste streams) and solid metal oxides. A definitive reaction mechanism has not been reported for CLC reaction of solid fuels. It has often been assumed that the solid/solid reaction is slow and therefore requires that reactions be conducted at temperatures high enough to gasify the solid fuel, or decompose the metal oxide. In contrast, data presented in this paper demonstrates that solid/solid reactions can be completed at much lower temperatures, with rates that are technically useful as long as adequate fuel/metal oxide contact is achieved. Density functional theory (DFT) simulations as well as experimental techniques such as thermo-gravimetric analysis (TGA), flow reactor studies, in situ X-ray photo electron spectroscopy (XPS), in situ X-ray diffraction (XRD) and scanning electron microscopy (SEM) are used to evaluate how the proximal interaction between solid phases proceeds. The data indicate that carbon induces the Cu-O bond breaking process to initiate the combustion of carbon at temperatures significantly lower than the spontaneous decomposition temperature of CuO, and the type of reducing medium in the vicinity of the metal oxide influences the temperature at which the oxygen release from the metal oxide takes place. Surface melting of Cu and wetting of carbon may contribute to the solid-solid contacts necessary for the reaction. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cryostat system for investigation on new neutron moderator materials at reactor TRIGA PUSPATI

A simple continuous flow (SCF) cryostat was designed to investigate the neutron moderation of alumina in high temperature co-ceramic (HTCC) and polymeric materials such as Teflon under TRIGA neutron environment using a reflected neutron beam from a monochromator. Cooling of the cryostat will be carried out using liquid nitrogen. The cryostat will be built with an aluminum holder for moderator within stainless steel cylinder pipe. A copper thermocouple will be used as the temperature sensor to monitor the moderator temperature inside the cryostat holder. Initial measurements of neutron spectrum after neutron passing through the moderating materials have been carried out using a neutron spectrometer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Directed Assembly of Cuprous Oxide Nanocatalyst for CO 2 Reduction Coupled to Heterobinuclear ZrOCo II Light Absorber in Mesoporous Silica

Hierarchical assembly of an oxo-bridged binuclear ZrOCo II light absorber unit coupled to a cuprous oxide nanocluster catalyst for CO 2 reduction on mesoporous silica support is demonstrated here. The proper positioning of the Cu oxide cluster was achieved by photodeposition of a [Cu(NCCH 3 ) 4 ] 2+ precursor by visible light excitation of the ZrOCo charge transfer chromophore, followed by mild calcination at 350 C. Illumination of the Cu x O y -ZrOCo unit so formed in the presence of a diethylamine electron donor resulted in the reduction of surface Cu centers to Cu 0 as demonstrated by the characteristic infrared band of adsorbed 13 CO probe molecules at 2056 cm –1 . For analogous Cu x O y -TiOCo II units, the oxidation state makeup of the surface Cu centers was dominated by Cu I , and the Cu 0 , Cu I , and Cu II composition was found to depend on the wavelength of MMCT excitation. The observed strong dependence of the CO 2 photoreduction yield on the oxidation state of the surface Cu centers directly proves that CO 2 is reduced on the Cu x O y surface, thus establishing that the ZrOCo II unit functions as light absorber, donating electrons to the Cu x O y catalyst on whose surface CO 2 is reduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure synthesis, crystal structure and magnetic properties of double perovskite oxide Ba{sub 2}CuOsO{sub 6}

A new compositional double perovskite oxide Ba{sub 2}CuOsO{sub 6} was synthesized under high-pressure (6 GPa) and high-temperature (1500 °C) conditions. The polycrystalline Ba{sub 2}CuOsO{sub 6} was characterized by synchrotron X-ray diffraction, thermogravimetric analysis, and magnetic susceptibility, isothermal magnetization, and specific heat measurements. The oxide crystallizes in a double-perovskite structure with an I4/m space group, in which Os(VI) and Cu(II) are ordered in the perovskite B-site. Ba{sub 2}CuOsO{sub 6} is electrically insulating with an activation energy of 0.813(2) eV and shows antiferromagnetic-like characteristics at temperatures of ∼55 K and ∼70 K. The results of the first-principle calculation suggested that the spin–orbit interaction of Os(VI) plays a substantial role in the insulating state. The Jahn–Teller distortion of CuO{sub 6} octahedra influences the magnetic characteristics with regard to possible two-dimensional magnetic correlations. - Graphical abstract: A new compositional double perovskite oxide Ba{sub 2}CuOsO{sub 6} synthesized by a high-pressure (6 GPa) and high-temperature (1500 °C) method. - Highlights: • A new compositional double perovskite oxide Ba{sub 2}CuOsO{sub 6} was synthesized. • Ba{sub 2}CuOsO{sub 6} is electrically insulating and antiferromagnetic below ∼70 K. • The Jahn–Teller distortion of CuO{sub 6} has relevance to possible magnetic anisotropy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controllable growth and photocatalytic activity of Cu{sub 2}O solid microspheres

Graphical abstract: - Highlights: • 3 μm uniform Cu{sub 2}O solid microspheres with abundant nanopores are achieved. • NH{sub 2}OH·HCl and SDS are main factors that manipulate morphologies of Cu{sub 2}O particles. • Surface features of microspheres influenced the photocatalytic activity of Cu{sub 2}O. • Microspheres are transforming to polyhedrons with extended holding time. - Abstract: A series of Cu{sub 2}O solid microspheres with different surface features were prepared and their photocatalytic activities were studied. The experiment conditions were investigated and the formation mechanism was explored systematically. It was found that varying the amounts of NH{sub 2}OH·HCl reductant in alkaline solutions changed the reaction process and thus altered the surface features of Cu{sub 2}O microspheres. Sodium dodecyl sulfate (SDS) surfactant, introduced as a morphology directing agent, caused the nuclei aggregation and growth process of Cu{sub 2}O solid microspheres by precisely realizing the opposite charges’ directional attraction. This SDS-mediated method can be readily extended to synthesizing solid microspheres of other metal oxides. Meanwhile, it was found that Cu{sub 2}O solid microspheres with abundant nanopores on the surface showed much higher efficient catalytic activity for decoloring methyl orange (MO) aqueous solution than with other surface features under visible light irradiation. Furthermore, we found that prolonging the holding time made Cu{sub 2}O microspheres transform to polyhedrons.

36 MATERIALS SCIENCE↗

Fine Structure of Rydberg Excitons in Cuprous Oxide

In 1952, E.F. Gross and N.A. Karryev discovered excitons of big radius also called the Wannier–Mott excitons. Their energy spectrum, response to external electric and magnetic fields, and also elastic deformations of a crystal were extensively studied in the 1960s–1970s. The second wave of interest to excitons in Cu{sub 2}O crystals appeared comparatively recent, in 2014, after the “giant” highly excited exciton states had been observed in this material. A theoretical description of highly excited exciton states needs, as a rule, new approaches, because, for such states, a deviation from the exactly solved hydrogen-like model becomes substantial and a numerical solution of the Schrödinger equation with allowance made for the features of the crystal energy band structure becomes extremely resource consuming. This report is a brief review of recent theoretical and experimental studies of the fine structure of the exciton energy spectrum in copper protoxide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical Looping Combustion Reactions and Systems

Chemical Looping Combustion (CLC) is one promising fuel-combustion technology, which can facilitate economic CO2 capture in coal-fired power plants. It employs the oxidation/reduction characteristics of a metal, or oxygen carrier, and its oxide, the oxidizing gas (typically air) and the fuel source may be kept separate. This work focused on two classes of oxygen carrier, one that merely undergoes a change in oxidation state, such as Fe3O4/Fe2O3 and one that is converted from its higher to its lower oxidation state by the release of oxygen on heating, i.e., CuO/Cu2O. This topical report discusses the results of four complementary efforts: (1) the development of process and economic models to optimize important design considerations, such as oxygen carrier circulation rate, temperature, residence time; (2) the development of high-performance simulation capabilities for fluidized beds and the collection, parameter identification, and preliminary verification/uncertainty quantification (3) the exploration of operating characteristics in the laboratory-scale bubbling bed reactor, with a focus on the oxygen carrier performance, including reactivity, oxygen carrying capacity, attrition resistance, resistance to deactivation, cost and availability (4) the identification of mechanisms and rates for the copper, cuprous oxide, and cupric oxide system using thermogravimetric analysis.

Sarofim, Adel↗

Synthesis and magnetic properties of ALnO{sub 2} (A=Cu or Ag; Ln=rare earths) with the delafossite structure

Synthesis, structures, and magnetic properties of ternary rare earth oxides ALnO{sub 2} (A=Cu or Ag; Ln=rare earths) have been investigated. CuLnO{sub 2} (Ln=La, Pr, Nd, Sm, Eu) were synthesized by the direct solid state reaction of Cu{sub 2}O and Ln{sub 2}O{sub 3}, and AgLnO{sub 2} (Ln=Tm, Yb, Lu) were obtained by the cation-exchange reaction of NaLnO{sub 2} and AgNO{sub 3} in a KNO{sub 3} flux. These compounds crystallized in the delafossite-type structure with the rhombohedral 3R type (space group: R-3m). Magnetic susceptibility measurements showed that these compounds are paramagnetic down to 1.8 K. Specific heat measurements down to 0.4 K indicated that CuNdO{sub 2} ordered antiferromagnetically at 0.8 K. - Graphical abstract: Ternary rare earth oxides ALnO{sub 2} (A=Cu or Ag; Ln=rare earths) crystallized in the delafossite-type structure with the rhombohedral 3R poly-type (space group: R-3m). Magnetic susceptibility measurements showed that these compounds are paramagnetic down to 1.8 K. Specific heat measurements down to 0.4 K indicated that CuNdO{sub 2} ordered antiferromagnetically at 0.8 K.

36 MATERIALS SCIENCE↗

Structure Sensitivity of the Low-temperature Water-gas Shift Reaction on Cu–CeO2 catalysts

We have investigated the structure sensitivity of the water-gas shift (WGS) reaction on Cu-CeO{sub 2} catalysts prepared at the nanoscale by different techniques. On the surface of ceria, different CuO{sub x} structures exist. We show here that only the strongly bound Cu-[O{sub x}]-Ce species, probably associated with the surface oxygen vacancies of ceria, are active for catalyzing the low-temperature WGS reaction. Weakly bound CuO{sub x} clusters and CuO nanoparticles are spectator species in the reaction. Isolated Cu{sup 2+} ions doping the ceria surface are not active themselves, but they are important in that they create oxygen vacancies and can be used as a reservoir of copper to replenish surface Cu removed by leaching or sintering. Accordingly, synthesis techniques such as coprecipitation that allow for extensive solubility of Cu in ceria should be preferred over impregnation, deposition-precipitation, ion exchange or another two-step method whereby the copper precursor is added to already made ceria nanocrystals. For the synthesis of different structures, we have used two methods: a homogeneous coprecipitation (CP), involving hexamethylenetetramine as the precipitating agent and the pH buffer; and a deposition-precipitation (DP) technique. In the latter case, the ceria supports were first synthesized at the nanoscale with different shapes (rods, cubes) to investigate any potential shape effect on the reaction. Cu-CeO{sub 2} catalysts with different copper contents up to ca. 20 at.% were prepared. An indirect shape effect of CeO{sub 2}, manifested by the propensity to form oxygen vacancies and strongly bind copper in the active form, was established; i.e. the water-gas shift reaction is not structure-sensitive. The apparent activation energy of the reaction on all samples was similar, 50 {+-} 10 kJ/mol, in a product-free (2% CO-10% H{sub 2}O) gas mixture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphitic carbon nitride/Cu{sub 2}O heterojunctions: Preparation, characterization, and enhanced photocatalytic activity under visible light

As a metal-free semiconductor material, graphitic carbon nitride (C{sub 3}N{sub 4}), the high recombination rate of photogenerated charges and insufficient sunlight absorption limit its solar-based photocatalytic activity. Here, we reported the heterojunctions of C{sub 3}N{sub 4}–Cu{sub 2}O with a p–n junction structure, which was synthesized by a hydrothermal method. The HR-TEM result revealed an intimate interface between C{sub 3}N{sub 4} and Cu{sub 2}O in the heterojunction, and UV–vis diffuse reflection spectra showed their extended spectral response in the visible region compared with pure C{sub 3}N{sub 4}. These excellent structural and spectral properties, as well as p–n junction structures, endowed the C{sub 3}N{sub 4}–Cu{sub 2}O heterojunctions with enhanced photocatalytic activities. The possible photocatalytic mechanism that photogenerated holes as the mainly oxidant species in photocatalysis was proposed base on the trapping experiments. - Highlights: • A hydrothermal method was used to prepare C3N{sub 4}–Cu{sub 2}O heterojunction. • The resulting heterojunction possesses broader absorption in the visible region. • The material owns a high visible light activity and stability for dye degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗