Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLLIMATORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Initial observations of low energy charged particles near the earth's bow shock on ISEE-1

Initial measurements from the ULECA sensor of the Max-Planck-Institut/University of Maryland experiment on ISEE 1 are reported. ULECA is an electrostatic deflection - total energy sensor consisting of a collimator, a deflection analyzer, and an array of solid-state detectors. The position of a given detector, which determines the energy per charge of an incident particle, together with the measured energy, determines the particle's charge state. It is found that a rich variety of phenomena are operative in the transthermal energy regime (about 10 keV/Q to 100 keV/Q) covered by ULECA. Specifically, observations are presented of locally accelerated protons, alpha particles, and heavier ions in the magnetosheath and upstream of earth's bow shock. Preliminary analysis indicates that the behavior of these locally accelerated particles is most similar at the same energy per charge.

Ipavich, F. M.↗

Observations of the structure of the diffuse X-ray emission from the Coma cluster

The Coma cluster has been scanned by an array of large X-ray proportional counters equipped with 10 min x 4 deg (FWHM) collimators. The results suggest the peak surface brightness is not coincident with one of the two giant elliptical galaxies, NGC 4889 and 4874, and show the X-ray emission to be more extended in the 0.5-1.5-keV band than in the 1.5-5-keV band. No evidence is found for concentrated X-ray sources, like those in M87 and NGC 1275. The X-ray surface brightness contours have an ellipticity which resembles that of the galaxy mass distribution, and evidence is found for clumpiness in the intracluster gas.

Johnson, M. W.↗

The optical identification of 2A 0311-227 with a new AM Herculis-type object

The X-ray source 2A 0311-227 has been precisely positioned by using the HEAO 1 scanning modulation collimator, resulting in an optical candidate with a B magnitude of about 15. Medium-resolution optical spectra of this star show remarkable similarity to the spectrum of AM Her, a short-period binary containing a magnetic white dwarf. The Balmer decrement in 2A 0311-227 is also similar to that in AM Her and may likewise be attributed to collisional excitation in a plasma with an electron density of the order of 10 to the 13th per cu cm.

Griffiths, R. E.↗

An evaluation of some display parameters for an advanced landing display

This paper discusses the results of a series of tests conducted to better understand some of the design parameters related to presenting an aircraft landing display on a cathode ray tube (CRT). The study was conducted on an aircraft simulator and the results were evaluated in terms of touchdown performance, pilot control activity, and scanning behavior, that is, how the pilot used the display. The results of the study indicate that magnification, presentation of symbols representing aircraft state, and whether the display is presented in a conventional CRT head-down configuration or a collimated head-up configuration, all play a role in the pilot's performance.

Waller, M. C.↗

Future progress in the development of the Lixiscope

Some of the potential of the lixiscope in astrophysics as well as in space medicine are reported. The positioning of the lixiscope as a sensitive detector placed at the focal plane of a focusing or collimating X-ray telescope, and studies of the inter-coastal spacing during weightlessness are described.

Trombka, J. I.↗

Computational methods for analyzing the transmission characteristics of a beta particle magnetic analysis system

Computational methods were developed to study the trajectories of beta particles (positrons) through a magnetic analysis system as a function of the spatial distribution of the radionuclides in the beta source, size and shape of the source collimator, and the strength of the analyzer magnetic field. On the basis of these methods, the particle flux, their energy spectrum, and source-to-target transit times have been calculated for Na-22 positrons as a function of the analyzer magnetic field and the size and location of the target. These data are in studies requiring parallel beams of positrons of uniform energy such as measurement of the moisture distribution in composite materials. Computer programs for obtaining various trajectories are included.

Singh, J. J.↗

A-3 scientific results

The scanning modulation collimator experiment designed to identify the optical counterparts of celestial X-ray sources is described. Identification of galactic sources is discussed. Results concerning active galaxies are presented.

Doxsey, R.↗

Conceptual development of the Laser Beam Manifold (LBM)

The laser beam manifold, a device for transforming a single, narrow, collimated beam of light into several beams of desired intensity ratios is described. The device consists of a single optical substrate with a metallic coating on both optical surfaces. By changing the entry point, the number of outgoing beams can be varied.

Campbell, W.↗

Lear jet boundary layer/shear layer laser propagation experiments

Optical degradations of aircraft turbulent boundary layers with shear layers generated by aerodynamic fences are analyzed. A collimated 2.5 cm diameter helium-neon laser (0.63 microns) traversed the approximate 5 cm thick natural aircraft boundary layer in double pass via a reflective airfoil. In addition, several flights examined shear layer-induced optical degradation. Flight altitudes ranged from 1.5 to 12 km, while Mach numbers were varied from 0.3 to 0.8. Average line spread function (LSF) and Modulation Transfer Function (MTF) data were obtained by averaging a large number of tilt-removed curves. Fourier transforming the resulting average MTF yields an LSF, thus affording a direct comparison of the two optical measurements. Agreement was good for the aerodynamic fence arrangement, but only fair in the case of a turbulent boundary layer. Values of phase variance inferred from the LSF instrument for a single pass through the random flow and corrected for a large aperture ranged from 0.08 to 0.11 waves (lambda = .63 microns) for the boundary layer. Corresponding values for the fence vary from 0.08 to 0.16 waves. Extrapolation of these values to 10.6 microns suggests negligible degradation for a CO2 laser transmitted through a 5 cm thick, subsonic turbulent boundary layer.

Gilbert, K.↗

Cycle II.5 aircraft aero-optical turbulent boundary-layer/shear-layer measurements

The aero-optical effects associated with propagating a laser beam through aircraft turbulent boundary layers and shear layers were examined. Observed laser optical performance levels were compared with those inferred from aerodynamic measurements of unsteady densities and correlation lengths within these random flows. Optical instrumentation included a fast shearing interferometer (FSI). A 9 cm diameter collimated helium neon laser beam made a double pass through the aircraft random flow via an airfoil mirror located one meter from the fuselage. Typical aircraft turbulent boundary layer thickness measured 0.3 meters. Averaging many FSI generated modulation transfer functions (MTFs) and Fourier transforming, this average yields the expected far field intensity degradation associated with an aircraft mounted laser system. Aerodynamic instrumentation included fine wire probes to measure unsteady temperature and mass flux. A laser doppler velocimeter measured unsteady velocity within the flows. An analysis of these data yielded point measurements of unsteady density and correlation length.

Gilbert, K.↗

An experimental evaluation of head-up display formats

Three types of head-up display format are investigated. Type 1 is an unreferenced (conventional) flight director, type 2 is a ground referenced flight path display, and type 3 is a ground referenced director. Formats are generated by computer and presented by reflecting collimation against a simulated forward view in flight. Pilots, holding commercial licenses, fly approaches in the instrument flight mode and in a combined instrument and visual flight mode. The approaches are in wind shear with varied conditions of visibility, offset, and turbulence. The displays are equivalent in pure tracking but there is a slight advantage for the unreferenced director in poor conditions. Flight path displays are better for tracking in the combined flight mode, possibly because of poor director control laws and the division of attention between superimposed fields. Workloads is better for the type 2 displays. The flight path and referenced director displays are criticized for effects of symbol motion and field limiting. In the subjective judgment of pilots familiar with the director displays, they are rated clearly better than path displays, with a preference for the unreferenced director. There is a fair division of attention between superimposed fields.

Naish, J. M.↗

Feasibility of modifying the high resolution infrared radiation sounder (HIRS/2) for measuring spectral components of Earth radiation budget

The concept of adding four spectral channels to the 20 channel HIRS/2 instrument for the purpose of determining the origin and profile of radiant existence from the Earth's atmosphere is considered. Methods of addition of three channels at 0.5, 1.0 and 1.6 micron m to the present 0.7 micron m visible channel and an 18-25 micron m channel to the present 19 channels spaced from 3.7 micron m to 15 micron m are addressed. Optical components and physical positions were found that permit inclusion of these added channels with negligible effect on the performance of the present 20 channels. Data format changes permit inclusion of the ERB data in the 288 bits allocated to HIRS for each scan element. A lamp and collimating optic assembly may replace one of the on board radiometric black bodies to provide a reference source for the albedo channels. Some increase in instrument dimensions, weight and power will be required to accommodate the modifications.

Koenig, E. W.↗

Effects of magnification and visual accommodation on aimpoint estimation in simulated landings with real and virtual image displays

Twenty professional pilots observed a computer-generated airport scene during simulated autopilot-coupled night landing approaches and at two points (20 sec and 10 sec before touchdown) judged whether the airplane would undershoot or overshoot the aimpoint. Visual accommodation was continuously measured using an automatic infrared optometer. Experimental variables included approach slope angle, display magnification, visual focus demand (using ophthalmic lenses), and presentation of the display as either a real (direct view) or a virtual (collimated) image. Aimpoint judgments shifted predictably with actual approach slope and display magnification. Both pilot judgments and measured accommodation interacted with focus demand with real-image displays but not with virtual-image displays. With either type of display, measured accommodation lagged far behind focus demand and was reliably less responsive to the virtual images. Pilot judgments shifted dramatically from an overwhelming perceived-overshoot bias 20 sec before touchdown to a reliable undershoot bias 10 sec later.

Randle, R. J.↗

Pulsed plasma thruster contamination studies

The exhaust plume of the one millipound pulsed plasma thruster has a measurable backflow upstream of the nozzle exit plane which may deposit on and degrade the performance of exposed spacecraft surfaces. High speed photographs and Faraday cup measurements suggest that this backflow is predominantly an electrically neutral, relatively low energy vapor. Articulated collimator quartz crystal microbalance measurements of this backflow were made for a thruster with a radically modified nozzle and a flat plate backflow shield, to determine the backflow sensitivity to nozzle design changes. The results are compared with the original nozzle backflow and show a measurable reduction in the backflow directly upstream of the shield.

Rudolph, L. K.↗

Evidence for variability of hard X-rays from NGC 4151

A search for gamma-rays in the 35-keV to 8.7-MeV energy range from the Seyfert galaxy NGC 4151 was made using an actively collimated scintillation detector. Upper limits to the flux in the 100-200-keV energy range are inconsistent with previous observations. Variability on a time scale of several months is indicated. Implications in terms of current models of NGC 4151 are discussed.

Meegan, C. A.↗

A search for low energy gamma rays from CG 195+4

A 13-deg-wide region of sky containing the high-energy gamma-ray source CG 195+4 was searched for X-ray and gamma-ray emission in the energy interval from 0.035 to 8.737 MeV. The balloon-altitude measurements were undertaken on October 4, 1977, at Palestine, Texas, and used an actively collimated scintillation counter. As a result of the measurements, low upper limits have been found for the spectrum from the source. Combined with the positive detections made with satellites at high energies, the measurements show that the photon number spectrum must have a spectral index harder than 2.0. The data appear inconsistent with models of the source in which the presumed neutron star is surrounded by a cloud thick to X-rays. Negative results of the search for periodicity are discussed.

Haymes, R. C.↗

Observations of Cygnus X-3 above 50 keV

Cygnus X-3 was observed in the energy range 50-400 keV using a balloon-borne, actively collimated, NaI(Tl) scintillation detector. The observation was made from phase 0.45-0.91 of the 4.8 hour period. The photon number spectrum was well represented by a power law with index -2.2. The flux increased throughout the observation, consistent with a highly asymmetric light curve with a peak near phase 0.9.

Meegan, C. A.↗