Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Thermal Processing Conditions for the Synthesis of Near Theoretical Density Li 5 La 3 Ta 2 O 12 Ceramics for Ceramic Dual-Mode Detectors

A family of Li-containing garnet compounds, extensively investigated for Li-ion solid electrolyte applications, show great potential to be developed into transparent ceramic dual-mode scintillators. In particular, Li 5 La 3 Ta 2 O 12 (LLTaO) shows promise as an efficient dual-mode scintillator due to its high Li content, high density, non-hygroscopicity, and high effective-Z. Often the synthesis of LLTaO ceramics involves solid state processing techniques starting with oxide and carbonate powders, calcining, sintering for the removal of residual porosity, and post-processing. This study focuses on two objectives: (1) establishing thermal processing boundary conditions for a flexible alkoxide-based sol-gel method for synthesizing fine-grained powders; and (2), consolidating powders via hot-pressing to form high-density ceramics. In this study, near single-phase ceramics were achieved by hot-pressing sol-gel powders with varying amounts of excess Li. Rietveld refinements were used to analyze X-ray diffraction data and provide a quantitative evaluation of the phases present in the hot pressed ceramics. Some of the diffraction data showed large low angle peak asymmetry, suggesting the presence of two cubic Li 5 La 3 Ta 2 O 12 garnet phases with different lattice parameters. Depending on the synthesis and processing conditions, the refinement revealed ~ 90 wt% concentration of a phase with a ≈ 12.8 Å and ~ 10 wt% concentration of a phase with a ≈ 12.9 Å, indicating a remaining excess of Li in the hot pressed ceramics in the large lattice parameter phase. These synthesis experiments allowed for the determination of a baseline for Li loss during hot-pressing. X-ray excited radioluminescence and photoluminescence excitation and emission spectra were obtained from the hot pressed ceramics. In conclusion, the measured emission spectra featured broad tantalate emission and line emissions likely from a rare-earth impurity.

36 MATERIALS SCIENCE↗

Novel Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation

Catalysts for the dehydrogenation of light alkanes were prepared by dispersing Pt on the surface of a calcined hydrotalcite-like support containing indium, Mg(In)(Al)O. Upon reduction in H{sub 2} at temperatures above 673 K, bimetallic particles of PtIn are observed by TEM, which have an average diameter of 1 nm. Analysis of Pt LIII-edge extended X-ray absorption fine structure (EXAFS) data shows that the In content of the bimetallic particles increases with increasing bulk In/Pt ratio and reduction temperature. Pt LIII-edge X-ray absorption near edge structure (XANES) indicates that an increasing donation of electronic charge from In to Pt occurs with increasing In content in the PtIn particles. The activity and selectivity of the Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation reactions are strongly dependent on the bulk In/Pt ratio. For both reactants, maximum activity was achieved for a bulk In/Pt ratio of 0.48, and at this In/Pt ratio, the selectivity to alkene was nearly 100%. Coke deposition was observed after catalyst use for either ethane or propane dehydrogenation, and it was observed that the alloying of Pt with In greatly reduced the amount of coke deposited. Characterization of the deposit by Raman spectroscopy indicates that the coke is present as highly disordered graphite particles <30 nm in diameter. While the amount of coke deposited during ethane and propane dehydrogenation are comparable, the effects on activity are dependent on reactant composition. Coke deposition had no effect on ethane dehydrogenation activity, but caused a loss in propane dehydrogenation activity. This difference is attributed to the greater ease with which coke produced on the surface of PtIn nanoparticles migrates to the support during ethane dehydrogenation versus propane dehydrogenation.

01 COAL, LIGNITE, AND PEAT↗

Following the movement of Cu ions in a SSZ-13 zeolite during dehydration, reduction and adsorption: a combined in situ TP-XRD, XANES/DRIFTS study

Cu-SSZ-13 has been shown to possess high activity and superior N2 formation selectivity in the selective catalytic reduction of NOx under oxygen rich conditions. Here, a combination of synchrotron-based (XRD and XANES) and vibrational (DRIFTS) spectroscopy tools have been used to follow the changes in the location and coordination environment of copper ions in a Cu-SSZ-13 zeolite during calcinations, reduction with CO, and adsorption of CO and H2O. XANES spectra collected during these procedures provides critical information not only on the variation in the oxidation state of the copper species in the zeolite structure, but also on the changes in the coordination environment around these ions as they interact with the framework, and with different adsorbates (H2O and CO). Time-resolved XRD data indicate the movement of copper ions and the consequent variation of the unit cell parameters during dehydration. DRIFT spectra provide information about the adsorbed species present in the zeolite, as well as the oxidation states of and coordination environment around the copper ions. A careful analysis of the asymmetric T-O-T vibrations of the CHA framework perturbed by copper ions in different coordination environments proved to be especially informative. The results of this study will aid the identification of the location, coordination and oxidation states of copper ions obtained during in operando catalytic studies. Financial support was provided by the US Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Program. Part of this work (sample preparation) was performed in the Environmental Molecular Sciences Laboratory (EMSL) at Pacific Northwest National Laboratory (PNNL). The EMSL is a national scientific user facility supported by the US DOE, Office of Biological and Environmental Research. PNNL is a multi-program national laboratory operated for the US DOE by Battelle. All of the spectroscopy work reported here was carried out at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL). NSLS is a national scientific user facility supported by the US DOE.

cation coordination↗

Enhancing the stability of copper chromite catalysts for the selective hydrogenation of furfural with ALD overcoating (II) – Comparison between TiO2 and Al2O3 overcoatings

TiO2 atomic layer deposition (ALD) overcoatings were applied to copper chromite catalysts to increase the stability for 2-furfuraldehyde (“furfural”) hydrogenation. After overcoating, about 75% activity was preserved compared to neat copper chromite: much higher activity than an alumina ALD overcoated catalyst with a similar number of ALD cycles. The effects of ALD TiO2 on the active Cu nanoparticles were studied extensively using both in-situ TPR/isothermal-oxidation and in-situ furfural hydrogenation via Cu XAFS. The redox properties of Cu were modified only slightly by the TiO2 ALD overcoat. However, a subtle electronic interaction was observed between the TiO2 ALD layers and the Cu nanoparticles. With calcination at 500 °C the interaction between the TiO2 overcoat and the underlying catalyst is strong enough to inhibit migration and site blocking by chromite, but is sufficiently weaker than the interaction between the Al2O3 overcoat and copper chromite that it does not strongly inhibit the catalytic activity of the copper nanoparticles.

Zhang, Hongbo↗

Phosphate-passivated mordenite for tandem-catalytic conversion of syngas to ethanol or acetic acid

Selective and stable production of C 2 oxygenates from syngas is enabled by a phosphate-passivated mordenite catalyst used in tandem with a commercial Cu/ZnO/AlMgO x catalyst. Unmodified mordenite used in this arrangement is accompanied by substantial hydrocarbon formation and carbon deposition. Therefore, phosphate groups are used to remove or significantly reduce Brønsted acidity in mordenite by capping aluminum sites. Such groups are stable to calcination and catalyst regeneration. Here, trimethylphosphite is used as a phosphate precursor because it is able to enter the 12 membered-ring pores of mordenite where hydrocarbon formation occurs, but not enter the 8 membered-ring sidepockets, where methanol carbonylation occurs selectively. The catalyst was characterized using X-ray fluorescence, X-ray diffraction, and thermal gravimetric analysis. Optionally, a third bed of Cu/ZnO/AlMgO x catalyst is able to hydrodeoxygenate acetic acid to ethanol. The C 2 oxygenate selectivity is over 96% and among the best reported in a single reactor with a syngas feed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating the impact of micropore volume of aminosilica functionalized SBA-15 on catalytic activity for amine-catalyzed reactions

Mesoporous materials such as SBA-15 are used in many applications since the materials are robust and have tunable properties. Whereas these materials are thought to be ideal, the materials are complex with the common synthesis methods producing materials that contain micropores. This work will investigate the impact of micropores on catalytic activity of aminosilica materials. For comparison, materials are formed using a standard method that produces materials with micropores (REG-SBA-15) and using a modified method that produces materials with negligible micropore volume (NMP-SBA-15). After grafting the calcined support with an aminosilane (either (N-methyl amino propyl) trimethoxy silane (denoted as 2°Am) or (N,N-diethyl-3-amino propyl) trimethoxy silane (3°Am)), catalytic testing experiments reveal that NMP-SBA-15 functionalized materials are more active than REG-SBA-15 functionalized materials for a range of reactions. The reactions include (a) glucose isomerization where amines interacting with surface silanols limit catalytic activity and (b) aldol and Knoevenagel chemistry where amine-silanol interactions increase the reaction rate. For aldol chemistry, the observed difference in rate is further investigated using site quantification experiments. Interestingly, the results reveal that three types of sites exist for each material, including sites that are (1) highly active, (2) intermediate active, and (3) inactive. Additionally, NMR experiments indicate that amines immobilized on REG-SBA-15 supports are less mobile than amines on NMP-SBA-15. For REG-SBA-15, the materials are found to have aminosilanes that have limited mobility and the largest fraction of inactive sites, which suggests that the inactive catalytic sites are in the micropores. Overall, the design of highly active catalytic materials can be achieved using materials that have limited micropore volumes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A pilot-process for calcium hydroxide production from iron slag by low-temperature precipitation

The production of Ca(OH) 2 via thermal decomposition of limestone is an energy intensive process resulting in significant CO 2 emissions. However, if produced in a manner that obviates the need for the thermal decomposition of limestone, Ca(OH) 2 could be a “CO 2 -negative” material. Herein, we design and demonstrate the operation of a continuous, low-temperature (< 100 °C), aqueous-phase pilot-process to produce Ca(OH) 2 using calcium extracted from alkaline industrial wastes. The three-step process encompasses unit operations including: (i) calcium leaching from basic oxygen furnace BOF slag, (ii) leachate concentration by reverse osmosis (RO), and (iii) Ca(OH) 2 precipitation by temperature swing. Here this process presents several advantages compared to the traditional route. First, it advances the recycling of waste from the steel industry. Second, it operates significantly below the temperature used in conventional lime production (900 °C) as it bypasses limestone calcination, responsible for ~65% of the CO 2 emissions from the current process. Thus, the new process has a lower CO 2 footprint and enables the use of industrial waste heat. The mass and energy balances were quantified to reveal that increasing the calcium concentration of the feed solution and the precipitation temperature, decrease the energy demands of the RO step, thereby reducing the process’s overall CO 2 footprint. The pilot system operated continuously and achieved a production rate of nearly 1 kg per day of Ca(OH) 2 with a purity greater than 95 wt%. The average particle size of the precipitates depended on the residence time in the precipitation reactor, demonstrating an ability to produce size-controlled particulates. Importantly, the process achieved full water recirculation/reutilization level indicative of a low-consumable water demand. The outcomes offer new insights and understanding relevant to developing and upscaling low-CO 2 processes for cement, lime, and portlandite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Densification of the entropy stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O

The first entropy-stabilized oxide, (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O, was reported in 2015. Initial studies synthesized this material using solid state processing and were limited to densities < 80%. Here, we report a straightforward solid state route to sinter samples to densities up to 98% of the theoretical by identifying the role of oxygen and promoting the resulting mechanisms in densification. Previous works have studied effects of cation stoichiometry on the entropy-driven reaction to form a single phase, but few have explored the associated effects of anion stoichiometry and/or redox chemistry on both phase stability and densification. We demonstrate here that tuning heating rate and pO 2 during heating of initially-homogeneous calcined powders can enhance densifying diffusion processes and enable reliable sintering of dense (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O samples.

MATERIALS SCIENCE↗

Sonochemical synthesis of highly luminescent Ln 2 O 3 :Eu 3+ (Y, La, Gd) nanocrystals

In this study, sonication of Ln(CH 3 COO) 3 ·H 2 O, Eu(CH 3 COO) 3 ·H 2 O and NaOH dissolved in the ionic liquid-butyl-3-methylimidazolium bis(trifluoromethane)sulfonylamide lead to Ln(OH) 3 :Eu (Ln: Gd, La, Y) nanoparticles. Subsequent calcination at 800 °C for 3 h allowed to obtain Ln 2 O 3 :Eu nanopowders. Gd 2 O 3 and Y 2 O 3 were obtained in the C-type lanthanide sequioxide structure, whereas La 2 O 3 crystallized in the A-type. Structure, morphology, and luminescent properties of the nano-oxides were investigated by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), dispersive X-ray (EDX), and photoluminescence (PL). SEM studies revealed that the synthesized Gd 2 O 3 :Eu, La 2 O 3 :Eu, and Y 2 O 3 :Eu formed nano-spindle, -sheets, and -rods in shape, respectively. The nanoscale materials show very efficient red emission due to the intraconfigurational f–f transitions of Eu 3+ . The quantum yields for Ln 2 O 3 :Eu (5%) were determined to be 4.2% for Ln=Gd, 13.8% for Ln=Y and 5.2% for Ln=La. The asymmetric ratio I 02 /I 01 of Eu 3+ varies from 5.3 for Gd 2 O 3 , to 5.6 for Y 2 O 3 to 6.5 for La 2 O 3 , which increased the color chromaticity.

36 MATERIALS SCIENCE↗

The Addition of Silicon Carbide to Surrogate Nuclear Fuel Kernels Made by the Internal Gelation Process

The US Department of Energy plans to use the internal gelation process to make tristructural isotropic (TRISO)-coated transuranic (TRU) fuel particles. The focus of this work is to develop TRU fuel kernels with high crush strengths, good ellipticity, and adequately dispersed silicon carbide (SiC). The submicron SiC particles in the TRU kernels are to serve as getters for excess oxygen and to potentially sequester palladium, rhodium, and ruthenium, which could damage the coatings during irradiation. Zirconium oxide microspheres stabilized with yttrium were used as surrogates because zirconium and TRU microspheres from the internal gelation process are amorphous and encounter similar processing problems. The hardness of SiC required modifications to the experimental system that was used to make uranium carbide kernels. Suitable processing conditions and equipment changes were identified so that the SiC could be homogeneously dispersed in gel spheres for subsequent calcination into strong spherical kernels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantification of process variables for carbothermic synthesis of UC 1-x N x fuel microspheres

This report details the continued investigation of process variables involved in converting sol-gel-derived, urania-carbon microspheres to ~820-μm-dia. UC 1-x N x fuel kernels in flow-through, vertical Mo and W crucibles at temperatures up to 2123 K. Experiments included calcining of air-dried UO 3 -H 2 O-C microspheres in Ar and H 2 -containing gases, conversion of the resulting UO 2 -C kernels to dense UO2:2UC in the same gases and vacuum, and its conversion in N 2 to UC 1-x N x (x = ~0.85). The thermodynamics of the relevant reactions were applied extensively to interpret and control the process variables. Producing the precursor UO 2 :2UC kernel of ~96% theoretical density was required, but its subsequent conversion to UC 1-x N x at 2123 K was not accompanied by sintering and resulted in ~83-86% of theoretical density. Increasing the UC 1-x N x kernel nitride component to ~0.98 in flowing N 2 -H 2 mixtures to evolve HCN was shown to be quantitatively consistent with present and past experiments and the only useful application of H 2 in the entire process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Surface area and particle size distribution of plutonium oxides derived from the direct oxidation of Pu metal (LA-UR-18-22581)

The intent of this paper is to interrogate the physical characteristics of PuO 2 powders and aggregates produced by direct metal oxidation to examine possible relationships between process parameters and the physical characteristics of the product. The majority of the PuO 2 samples considered were generated during the pre-production and production phases of the Advanced Recovery and Integrated Extraction System (ARIES) program at Los Alamos National Laboratory (LANL). Oxide formed passively on Pu metal surfaces at ambient atmospheric conditions is also characterized. Plutonium oxide powders from the ARIES Direct Metal Oxidation (DMO) furnace and muffle furnace process lines are very consistent in terms of their bulk and tapped density, specific surface area (SSA) and particle size distribution (PSD). The SSAs of calcined PuO 2 generated in the ARIES DMO-2 and muffle furnaces are between 0.1 and 0.5 m2/g. Oxides from both the DMO-2 and muffle furnaces also had similar tri-modal PSDs with maxima at 0.73–3.16 μm, 10.9–18.5 μm, and 41.3–63.0 μm. The PSDs of the oxide formed passively on Pu metal surfaces at ambient conditions were unimodal, with near-Gaussian distributions and D50 close to 1 μm. In conclusion, the oxide formed passively at ambient conditions also had significantly higher SSAs (6–8 m 2 /g).

36 MATERIALS SCIENCE↗

Uranium Oxide Synthetic Pathway Discernment through Unsupervised Morphological Analysis

We present a novel unsupervised machine learning method for quantitative representation of scanning electron micrographs and its applications and performance for nuclear forensic analysis of uranium ore concentrates. The method uses a vector quantizing variational autoencoder followed by a histogram operation to encode a micrograph into a single dimensional representation, called the latent vector. The method requires no extant labeling of the data and can be applied over large datasets of micrographs with minimal human interaction. The representations generated are broadly descriptive of each micrograph and the microstructure of the material imaged. In the case of uranium ore concentrate analysis, the representations were amenable to processing reagent and ore concentrate species classification with accuracy of 81:8%, which is competitive with state-of-the-art supervised networks. The representations were also used to classify previously unseen processing routes, were able to classify imaging parameters such as magnification (to 76:0% accuracy), were able to classify fine grained process parameters such as calcining temperature (to 74:4% accuracy), and their informatic properties indicate that they are generally descriptive of the image represented. This method can be applied across microstructure analysis fields to perform quantitative analysis without the need for labor intensive and possibly biased human analysis.

Scanning Electron Microscopy, Vector Quantizing Va↗

Computational insights into the structure of anhydrous Pu(III) oxalate

Despite the plutonium oxalate method's wide use in plutonium reprocessing, the method's mechanistic details remain unclear, particularly the identity of the plutonium oxidation state during conversion from an oxalate hydrate to the oxide. Recently, the optical vibrational spectra of Pu(III) oxalate during calcination were measured, providing an experimental reference for computational studies aimed at elucidating the oxalate structure. Here, in this work, we compare the vibrational and electronic properties of two candidate anhydrous Pu(III) oxalate structures calculated using density functional theory with recent experiments. We find that both structures are plausible and may coexist at experimental temperatures, providing insights into the broad features measured in the Raman and infrared spectra.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simply AlF3-treated Li4Ti5O12 composite anode materials for stable and ultrahigh power lithium-ion batteries

The commercial Li4Ti5O12 (LTO) is successfully modified by AlF3 via a low temperature process. After being calcined at 400oC for 5 hours, AlF3 reacts with LTO to form a composite material which mainly consists of Al3+ and F- co-doped LTO with small amounts of anatase TiO2 and Li3AlF6. Al3+ and F- co-doped LTO demonstrates largely improved rate capability comparing to the pristine LTO. Since the amount of the byproduct TiO2 is relatively small, the modified LTO electrodes retain the main voltage characteristics of LTO with a minor feature similar to those of anatase TiO2. The doped LTO anodes deliver higher discharge capacity and significantly improved high-rate performance when compared to the pristine LTO anode. They also demonstrate excellent long-term cycling stability at elevated temperatures. Therefore, Al3+ and F- co-doped LTO synthesized at low temperature is an excellent anode for stable and ultra-high power lithium-ion batteries.

Anode↗

Succinic acid-based leaching system: A sustainable process for recovery of valuable metals from spent Li-ion batteries

A hydrometallurgical method involving natural organic acid leaching has been developed for recovery of lithium and cobalt from the cathode active materials in spent lithium-ion batteries. Succinic acid is employed as leaching agent and H2O2 as reductant. The cobalt and lithium contents from the succinic acid-based treatment of spent batteries are determined by inductively coupled plasma-optical emission spectroscopy to calculate the leaching efficiency. The spent LiCoO2 samples after calcination and the residues after leaching are characterized by X-ray diffraction and scanning electron microscopy. The results show that nearly 100% of cobalt and more than 96% of lithium are leached under optimal conditions: succinic acid concentration of 1.5 mol L-1, H2O2 content of 4 vol.%, solid-to-liquid ratio of 15 g L-1, temperature of 70 °C, and reaction time of 40 min. Results are also given for fitting of the experimental data to acid leaching kinetic models.

25 ENERGY STORAGE↗

Ultraporous nitrogen-rich carbon nanosheets derived from the synergy of eutectic liquid and zeolitic imidazolate for energy applications

This report presents a unique and novel synthetic method for the preparation of highly porous nitrogen-rich carbon nanosheets from ZIF-8 (ZIF, zeolitic imidazolate framework) with the assistance of eutectic liquid. Due to the low melting temperature, a mixture of eutectic salts can provide a special atmosphere for the carbonization process and function as the template to support the ZIF-8 framework. The formation of the ultraporous nanosheets can be ascribed to the excellent miscibility between the eutectic salts and ZIF-8 framework, thus helping convert the ordered calcined intermediate species into extended carbon sheets at high temperature while inheriting the microporous structure from the prototypical ZIF-8. Furthermore, by controlling the ratio of eutectic liquid to ZIF-8 framework, the BET surface area of carbon nanosheets can be systematically tuned, with the highest BET surface area up to 2960 m 2 g -1 . In addition to this impressive high surface area, the pore size distribution follows well with the pristine ZIF-8. The nitrogen content varies from 9.9 wt. % to 13.4 wt. %. These characteristics contribute to the excellent performance of CO2 adsorption (5.45 mmol g -1 at 1atm and 273K) and oxygen reduction reaction (ORR) catalysis due to the large numbers of accessible active sites.

36 MATERIALS SCIENCE↗

Nanostructured ligament and fiber Al–doped Li 7 La 3 Zr 2 O 12 scaffolds to mediate cathode-electrolyte interface chemistry

In this study, scaffold structures of electrospun aluminum–substituted lithium lanthanum zirconate Li 7 La 3 Zr 2 O 12 (Al-LLZO) were synthesized and used as an additive in a LiNi 0.6 Mn 0.2 Co 0.2 O 2 composite cathode. The scaffolds were crystalized in the cubic phase after calcination at 700 °C. The Al-LLZO scaffold morphology was dependent on the precursor formulation (aqueous and dimethylformamide. The aqueous precursors resulted in scaffolds of densely coalesced ligaments, whereas the dimethylformamide precursors resulted in high–aspect ratio nanofiber scaffolds. The long-term cycling stability and rate performance of the cells were found to depend on the Al-LLZO scaffold morphology. The uniformly dispersed Al-LLZO fibers resulted in a more stable cathode electrolyte interface formation through the reduced decomposition of the LiPF 6 salt during cycling, resulting in a better high-rate and long-term cycling performance.

25 ENERGY STORAGE↗