Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Algae”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Scarcity of fixed carbon transfer in a model microbial phototroph–heterotroph interaction

Although the green alga Chlamydomonas reinhardtii has long served as a reference organism, few studies have interrogated its role as a primary producer in microbial interactions. Here, we quantitatively investigated C. reinhardtii’s capacity to support a heterotrophic microbe using the established coculture system with Mesorhizobium japonicum, a vitamin B 12 -producing α-proteobacterium. Using stable isotope probing and nanoscale secondary ion mass spectrometry (nanoSIMS), we tracked the flow of photosynthetic fixed carbon and consequent bacterial biomass synthesis under continuous and diurnal light with single-cell resolution. We found that more 13 C fixed by the alga was taken up by bacterial cells under continuous light, invalidating the hypothesis that the alga’s fermentative degradation of starch reserves during the night would boost M. japonicum heterotrophy. 15 NH 4 assimilation rates and changes in cell size revealed that M. japonicum cells reduced new biomass synthesis in coculture with the alga but continued to divide—a hallmark of nutrient limitation often referred to as reductive division. Despite this sign of starvation, the bacterium still synthesized vitamin B 12 and supported the growth of a B 12 -dependent C. reinhardtii mutant. Finally, we showed that bacterial proliferation could be supported solely by the algal lysis that occurred in coculture, highlighting the role of necromass in carbon cycling. Collectively, these results reveal the scarcity of fixed carbon in this microbial trophic relationship (particularly under environmentally relevant light regimes), demonstrate B 12 exchange even during bacterial starvation, and underscore the importance of quantitative approaches for assessing metabolic coupling in algal–bacterial interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Identification of an algal xylan synthase indicates that there is functional orthology between algal and plant cell wall biosynthesis

Summary Insights into the evolution of plant cell walls have important implications for comprehending these diverse and abundant biological structures. In order to understand the evolving structure–function relationships of the plant cell wall, it is imperative to trace the origin of its different components. The present study is focused on plant 1,4‐β‐xylan, tracing its evolutionary origin by genome and transcriptome mining followed by phylogenetic analysis, utilizing a large selection of plants and algae. It substantiates the findings by heterologous expression and biochemical characterization of a charophyte alga xylan synthase. Of the 12 known gene classes involved in 1,4‐β‐xylan formation, XYS 1/ IRX 10 in plants, IRX 7, IRX 8, IRX 9, IRX 14 and GUX occurred for the first time in charophyte algae. An XYS 1/ IRX 10 ortholog from Klebsormidium flaccidum , designated K. flaccidum XYLAN SYNTHASE ‐1 ( Kf XYS 1), possesses 1,4‐β‐xylan synthase activity, and 1,4‐β‐xylan occurs in the K. flaccidum cell wall. These data suggest that plant 1,4‐β‐xylan originated in charophytes and shed light on the origin of one of the key cell wall innovations to occur in charophyte algae, facilitating terrestrialization and emergence of polysaccharide‐based plant cell walls.

59 BASIC BIOLOGICAL SCIENCES↗

A Systems Biology and Pond Culture-based Understanding and Improvement of Metabolic Processes Related to Productivity in Diverse Microalgal Classes for Viable Biofuel Production

The overarching goal of this project was to understand and manipulate fundamental molecular mechanisms involved in maximizing growth rate and lipid accumulation in diverse classes of microalgae under authentic diurnal conditions to enhance production capabilities for biofuels. The research was aimed at filling two critical knowledge gaps by addressing fundamental cellular issues that govern growth and fuel molecule accumulation in conjunction with realistic climate-simulated cultivation: 1) The insufficient understanding of the effect of metabolic topology on cellular carbon partitioning and its regulation with regards to productivity. 2) The understudied effect of the diurnal and cell cycles on cellular metabolism, resource allocation, and resource mobilization under simulated production conditions. To unravel broader as well as lineage-specific regulatory mechanisms that determine productivity, we compared green algae with diatoms. Complementing the systems approach with a pond-based cultivation method under authentic diurnal conditions, we anticipated an understanding of how the effect of diurnal and cell cycles affects growth and lipid productivity. Elucidation of the topology and regulation of relevant metabolic networks in proposed new model organisms was expected to enable improvements in functional capabilities and biosynthetic pathways. The major goals of the project were achieved by the following accomplishments. Genome assemblies and functional annotations for the green algae S. obliquus strain DOE0152Z and Coleastrella sp. strain DOE0202. Development of a metabolic map for the core carbon metabolism for S. obliquus. Analyzed the cellular topology for the core carbon network and proposed differences in core carbon metabolism for the Chlorophyceae versus the Trebouxiophyceae. Discovered the genes for enzymes involved in dicarboxylic acid metabolism and proposed the existence of C4-type metabolism for S. obliquus. Calculated the energy and reducing equivalencies for TAG and isoprenoid biosynthesis based on the core carbon network created in this project. Identified one newly created strain SOM-P004 (UV-Mutagenesis), which performed better at higher culture densities than wild type in LEAPS reactors under simulated environmental conditions. Results obtained within the course of this project were used in 2017 to apply for a Community Science Program (CSP) at the DOE Joint Genome Institute (JGI). The project (JGI Proposal Id: 503423) with the Title “Comparative genomics and germ plasm diversity in Acutodesmus, a green microalgal bioenergy feedstock candidate with potential for breeding and hybridization.” was selected for CSP 2018 for sequencing of up to 30 genomes of the alga A. obliquus (=S. obliquus). Our genome of the strain DOE0152Z serves as a reference for this new CSP project. Characterization of synchronized cultures of Cyclotella cryptica and the implications on productivity. Determination that some cellular pigments respond to light, but others to the cell cycle. Characterization of productivity of C. cryptica in PNNL ponds. Genome sequence and metabolic mapping of Marinichlorella kaistiae KAS603. Demonstration that some green algae store and utilize starch in the cytoplasm. Photorespiratory pathway clarified in T. pseudonana leading to a better understanding of carbon flux pathways in diatoms. Genome sequence determination, annotation, and comparison completed for C. cryptica, identifying potential metabolic differences that lead to high biomass and lipid accumulation ability for this species. Transcriptomic comparison of silicon (Si) and nitrogen (N) limited triacylglycerol accumulation in Cyclotella cryptica.

59 BASIC BIOLOGICAL SCIENCES↗

Direct Ink Write and Processing of Complex 3D Marine Compatible Structures with Calcium Carbonate Slurries

Ocean acidification heavily impacts marine ecosystems by reducing calcification. Many coral-algae symbiotic relationships are in jeopardy due to the destruction of coral reefs. Here, a ceramic ink compatible with the direct ink write additive manufacturing technique was formulated and used to print marine compatible structures that could grow algae and restore that relationship. A diacrylate polymer was mixed with calcium carbonate, a material that comprises a coral skeleton, to create a slurry with shear thinning properties. Rheology studies were conducted to confirm printing properties and characterize the slurry. Printed parts demonstrated strong control over print features, including size and infill design. Various infill patterns and percentages were attempted to optimize printability and potential algae growth. Thermogravimetric analysis helped determine a logical burnout and sintering procedure to avoid large cracking. This project developed a printable and sinter-able calcium carbonate ceramic slurry for complex marine-compatible structures and algae growth. This research was conducted in the support of the Eco Reef project.

36 MATERIALS SCIENCE↗

Underlying data for characterization of phycocyanobilin (PCB) biosynthesis in Galdieria sulphuraria

This dataset contains data for studies of phycocyanobilin (PCB) synthesis in the red alga Galdieria sulphuraria. Red algae such as G. sulphuraria utilize phycobilisomes for light harvesting. The phycobilisomes of early-branching organisms such as G. sulphuraria or Cyanidioschyzon merolae contain PCB chromophores but not phycoerythrobilin (PEB), in contrast to the phycobilisomes of other red algae. The studies reported in this dataset examine biosynthesis of PCB in G. sulphuraria and C. merolae, starting from biliverdin IX-alpha (BV), the last known common precursor for PCB and PEB. In cyanobacteria, phages, green algae, and land plants, conversion of BV into PCB or PEB is carried out by a family of enzymes called ferredoxin-dependent bilin reductases (FDBRs). The current studies demonstrate that G. sulphuraria, but not C. merolae, require the action of an additional isomerase to synthesize PCB.

59 BASIC BIOLOGICAL SCIENCES↗

Observations on gas exchange and element recycle within a gas-closed algal-mouse system

Life support systems based on bioregeneration rely on the control and manipulation of organisms. Algae are potentially useful for a variety of Closed Ecological Life Support System (CELSS) functions including the revitalization of atmospheres, production of food and for nitrogen fixation. The results of experiments conducted with a gas-closed algal-mouse system designed to investigate gas exchange phenomena under varying algal environmental conditions, and the ability of algae to utilize oxidized mouse solid waste are reported. Inherent instabilities exist between the uptake and release of carbon dioxide (CO2) and oxygen (O2) by the mouse and algae in a gas-closed system. Variations in light intensity and cell density alter the photosynthetic rate of the algae and enable short-term steady-state concentrations of atmospheric CO2 and O2. Different nitrogen sources (urea and nitrate) result in different algal assimilatory quotients (AQ). Combinations of photosynthetic rate and AQ ratio manipulations were examined for their potential in stabilizing atmospheric gas concentrations in the gas-closed algal-mouse system.

Smernoff, D. T.↗

Algal Accessory Pigment Detection Using AVIRIS Image-Derived Spectral Radiance Data

Visual and derivative analyses of AVIRIS spectral data can be used to detect algal accessory pigments in aquatic communities. This capability extends the use of remote sensing for the study of aquatic ecosystems by allowing detection of taxonomically significant pigment signatures which yield information about the type of algae present. Such information allows remote sensing-based assessment of aquatic ecosystem health, as in the detection of nuisance blooms of cyanobacteria or toxic blooms of dinoflagellates. Remote sensing of aquatic systems has traditionally focused on quantification of chlorophyll a, a photoreactive (and light-harvesting) pigment which is common to all algae as well as cyanobacteria (bluegreen algae). Due to the ubiquitousness of this pigment within algae, chl a is routinely measured to estimate algal biomass both during ground-truthing and using various airborne or satellite based sensors, including AVIRIS. Within the remote sensing and aquatic sciences communities, ongoing research has been performed to detect algal accessory pigments for assessment of algal population composition. This research is based on the fact that many algal accessory pigments are taxonomically significant, and all are spectrally unique. Aquatic scientists have been refining pigment analysis techniques, primarily high performance liquid chromatography, or HPLC, to detect specific pigments as a time-saving alternative to individual algal cell identifications and counts. Remote sensing scientists are investigating the use of pigment signatures to construct pigment libraries analogous to mineral spectral libraries used in geological remote sensing applications. The accessory pigment approach has been used successfully in remote sensing using data from the Thematic Mapper, low-altitude, multiple channel scanners, field spectroradiometers and the AVIRIS hyperspectral scanner. Due to spectral and spatial resolution capabilities, AVIRIS is the sensor of choice for such studies. We present here our results on detection of algal accessory pigments using AVIRIS data.

Richardson, Laurie L.↗

Method of producing purified carotenoid compounds

A method of producing a carotenoid in solid form includes culturing a strain of Chlorophyta algae cells in a minimal inorganic medium and separating the algae comprising a solid form of carotenoid. In one embodiment f the invention, the strain of Chlorophyta algae cells includes a strain f Chlamydomonas algae cells.

Eggink, Laura↗

Quantifying Spatiotemporal Variability of Glacier Algal Blooms and the Impact on Surface Albedo in Southwestern Greenland

Albedo reduction due to light-absorbing impurities can substantially enhance ice sheet surface melt by increasing surface absorption of solar energy. Glacier algae have been suggested to play a critical role in darkening the ablation zone in southwestern Greenland. It was very recently found that the Sentinel-3 Ocean and Land Colour Instrument (OLCI) band ratio R709 nm∕R673 nm can characterize the spatial patterns of glacier algal blooms. However, Sentinel-3 was launched in 2016, and current data are only available over three melting seasons (2016–2019). Here, we demonstrate the capability of the MEdium Resolution Imaging Spectrometer (MERIS) for mapping glacier algae from space and extend the quantification of glacier algal blooms over southwestern Greenland back to the period 2004–2011. Several band ratio indices (MERIS chlorophyll a indices and the impurity index) were computed and compared with each other. The results indicate that the MERIS two-band ratio index (2BDA) R709 nm∕R665 nm is very effective in capturing the spatial distribution and temporal dynamics of glacier algal growth on bare ice in July and August. We analyzed the interannual (2004–2011) and summer (July–August) trends of algal distribution and found significant seasonal and interannual increases in glacier algae close to the Jakobshavn Isbrae Glacier and along the middle dark zone between the altitudes of 1200 and 1400 m. Using broadband albedo data from the Moderate Resolution Imaging Spectroradiometer (MODIS), we quantified the impact of glacier algal growth on bare ice albedo, finding a significant correlation between algal development and albedo reduction over algae-abundant areas. Our analysis indicates the strong potential for the satellite algal index to be used to reduce bare ice albedo biases in regional climate model simulations.

surface albedo↗

High yield algal biomass production without concentrated CO2 supply under open pond conditions

Methods and systems for efficient culturing of algae in open ponds. Further, the methods include a method for culturing algae in an open pond medium that is free of any concentrated supply of CO2, and no concentrated source of CO2 is used to supply carbon for culturing the algae. Also, the algae are cultured in the open pond which has a pH above 9.5. In addition, the open pond medium has incorporated therein an inorganic carbon buffer at a specified concentration under conditions for obtaining an increased biomass. Also, the pH above 9.5 permits sufficient increased fixation of atmospheric CO2 into the open pond medium.

Pendyala, Brahmaiah↗

BIOPLASTIC PRODUCTION FROM MICROALGAE WITH FUEL CO-PRODUCTS: A TECHNO-ECONOMIC AND LIFE-CYCLE ASSESSMENT

Concerns over depleting oil reserves and national security have spurred renewed vigor in developing bio-based products. One specific area of growing concern is the consumption of petroleum based plastics, which is expected to consume 20% of global annual oil by 2050. Algae systems represent a promising pathway for the development of a bioplastic feedstock but have many technological challenges. Algae-based plastics offer a promising alleviate that would decrease oil consumption, improve environmental impact, and in some cases even improve plastic performance. This study investigates the economic viability and environmental impact of an algae biorefinery that integrates the complementary functions of bioplastic and fuel production. The bioplastic and biofuel biorefinery modeled herein includes nine different production scenarios. Performance of the facility was validated based on experimental systems with modeling work focusing on mass and energy balances of all required sub-processes in the production pathway. Results show the minimum selling price of the bioplastic feedstock is within the realm of economic competition with prices as low as $970 USD tonne-1. Additionally, LCA results indicate drastic improvements in environmental performance of the produced bioplastic feedstock, with reductions ranging between 67-116% compared to petroleum based plastics. These results indicate that an algae biorefinery focused on bioplastic feedstock production and fuels has the potential to operate both economically and sustainably. Sensitivity analysis results, alternative co-products (given that fuels represent minimal value) and product market potential are discussed.

09 BIOMASS FUELS↗

Multicriteria-Based Selection of Microalgae Biorefineries: Biomass Composition Defines the Most Suitable Product Portfolios

The supply of microalgae-derived biofuels and bioproducts will be vital in a global-scale bioeconomy. As the diversity of microalgae strains and their compositional plasticity may yield a wide array of products of market interest, the design of effective biorefineries is a central aspect in the path to making microalgae-based products available in the market. In this way, the conversion of microalgae biomass should be planned to employ mature technologies, while maximizing economic and environmental benefits obtained from a diverse product portfolio. This study applied sequential, hybrid Multicriteria Decision Analyses (MCDA) to aid the decision-making process of outlining the most suitable biorefining pathways for specific compositional profiles. For this, the methodology simultaneously considered multiple technical, economic, and environmental criteria, such as market aspects for the main algae-derived products, potential reduction in greenhouse gas (GHG) emissions provided by the biobased alternatives, and technology readiness level of conversion routes, among others. The framework was tested using productivity and compositional data for 13 high-productivity summer strains cultivated under varying nutrient availability. The analysis pointed to compositional profile being a key driver in defining the core biorefining strategy of algae biomass, with lipid-to-carbohydrate ratios higher than roughly 1 warranting the preferential processing of lipids into hydrocarbon fuels with the remainder of the algae biomass compounds being sent to higher-value applications, such as carboxylic acids and renewable thermoplastic substitutes. An in-depth process simulation, techno-economic assessment (TEA), and life-cycle analysis (LCA) effort was carried out as a closing step to corroborate the results stemming from the proposed framework. This study validates the use of MCDAs as a screening method prior to implementing more time-consuming analysis techniques and makes a compelling case for this approach as a product selection tool on a wide range of algae species, thus helping establish species-agnostic (but composition-driven) biorefineries.

biofuels↗

Evaluation of a high-moisture stabilization strategy for harvested microalgae blended with herbaceous biomass: Part I—Storage performance

Here, algal biomass is becoming increasingly attractive as a feedstock for biofuel production. However, the swing in algal biomass production between summer and winter months poses a challenge for delivering predictable, constant feedstock supply to a conversion facility. Drying is one approach for stabilizing algal biomass produced in excess during high productivity summer months for utilization during low productivity months, yet drying is energy intensive and thus costly. Wet, anaerobic storage, or ensiling, is a low-cost approach that is commonly used to preserve high moisture herbaceous feedstock. The potential for microalgae stabilization without the need for drying was investigated in this study by simulating ensiling, in which oxygen limitation drives anaerobic fermentation of soluble sugars to organic acids, dropping the pH and thereby stabilizing the material. Algal biomass, Scenedesmus obliquus , was blended with corn stover and stored in acidic, anaerobic conditions at 60% moisture (wet basis) to simulate wet storage by means of ensiling. Results demonstrate that algae and corn stover blends were successfully preserved in anaerobic, acidic conditions for 30 days with < 2% dry matter loss occurring during storage compared to 21% loss in aerobic, non-acidified conditions. Likewise, Scenedesmus obliquus stored alone at 80% moisture (wet basis) in acidified, anaerobic conditions for 30 days, resulted in dry matter losses of 6–14%, compared to 44% loss in neutral pH, anaerobic storage and 37% loss in a neutral pH, aerobically stored condition. Additional experiments were performed at a larger scale in which an algae and corn stover blend was subject to mechanical oxygen exclusion and a Lactobacillus acidophilus inoculum, resulting in 8% loss over 35 days and further indicating that acidic, anaerobic conditions can stabilize microalgae biomass. In summary, the stabilization of harvested algae can be achieved through anaerobic storage, securing a feedstock that is labile yet of high value.

09 BIOMASS FUELS↗

Environmental indicators for sustainable production of algal biofuels

For analyzing sustainability of algal biofuels, we identify 16 environmental indicators that fall into six categories: soil quality, water quality and quantity, air quality, greenhouse gas emissions, biodiversity, and productivity. Indicators are selected to be practical, widely applicable, predictable in response, anticipatory of future changes, independent of scale, and responsive to management. Major differences between algae and terrestrial plant feedstocks, as well as their supply chains for biofuel, are highlighted, for they influence the choice of appropriate sustainability indicators. Algae strain selection characteristics do not generally affect which indicators are selected. The use of water instead of soil as the growth medium for algae determines the higher priority of water- over soil-related indicators. The proposed set of environmental indicators provides an initial checklist for measures of biofuel sustainability but may need to be modified for particular contexts depending on data availability, goals of the stakeholders, and financial constraints. Ultimately, use of these indicators entails defining sustainability goals and targets in relation to stakeholder values in a particular context and can lead to improved management practices.

09 BIOMASS FUELS↗

Maximizing the Hydrogen Photoproduction Yields in Chlamydomonas Reinhardtii Cultures: The Effect of the H2 Partial Pressure

Photoproduction of H{sub 2} gas has been examined in sulfur/phosphorus-deprived Chalmydomonas reinhardtii cultures, placed in photobioreactors (PhBRs) with different gas phase to liquid phase ratios (V{sub g.p.}/V{sub l.p.}). The results demonstrate that an increase in the ratio stimulates H{sub 2} photoproduction activity in both algal suspension cultures and in algae entrapped in thin alginate films. In suspension cultures, a 4x increase (from {approx}0.5 to {approx}2) in V{sub g.p.}/V{sub l.p} results in a 2x increase (from 10.8 to 23.1 mmol l{sup -1} or 264-565 ml l{sup -1}) in the total yield of H{sub 2} gas. Remarkably, 565 ml of H{sub 2} gas per liter of the suspension culture is the highest yield ever reported for a wild-type strain in a time period of less than 190 h. In immobilized algae, where diffusion of H{sub 2} from the medium to the PhBR gas phase is not affected by mixing, the maximum rate and yield of H{sub 2} photoproduction occur in PhBRs with V{sub g.p.}/V{sub l.p} above 7 or in a PhBR with smaller headspace, if the H{sub 2} is effectively removed from the medium by continuous flushing of the headspace with argon. These experiments in combination with studies of the direct inhibitory effect of high H{sub 2} concentrations in the PhBR headspace on H{sub 2} photoproduction activity in algal cultures clearly show that H{sub 2} photoproduction in algae depends significantly on the partial pressure of H{sub 2} (not O{sub 2} as previously thought) in the PhBR gas phase.

08 HYDROGEN↗

Final Technical Report, DE-SC0005319

The CEHMM algae to biodiesel project is a research and development endeavor investigating renewable fuels and a host of high-value co-products from the propagation, harvesting, and extraction of oil from a salt/brine water algae in open raceway ponds. Use of algae as renewable fuel feedstock complementary to petroleum diesel has great potential to make fuels and a host of valuable co-products, thereby reducing American dependence on foreign oil, sequestering carbon, and providing attractive multi-market returns for potential investors. This project is a green energy project thereby supporting the national agenda of a clean and renewable source of energy and will not compete with traditional food crops.

02 PETROLEUM↗

Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Ex Situ Catalytic Fast Pyrolysis, Hydrothermal Liquefaction, Combined Algal Processing, and Biochemical Conversion: Update of the 2018 State-of-Technology Cases and Design Cases

This technical report describes the SCSAs for the production of renewable hydrocarbon transportation fuels via a range of conversion technologies: (1) renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of woody lignocellulosic biomass (note that the IDL pathway in this SCSA represents the syngas conversion design in the 2018 SOT and 2022 design cases [Tan et al., 2018]); (2) renewable gasoline (RG) and diesel (RD) blendstocks via ex situ catalytic fast pyrolysis of woody lignocellulosic biomass; (3) RD via hydrothermal liquefaction (HTL) of wet sludge from a wastewater treatment plant; (4) renewable hydrocarbon fuels via biochemical conversion of herbaceous lignocellulosic biomass; (5) renewable diesel via HTL of a blend of algae and woody biomass; and (6) renewable diesel via combined algae processing (CAP). This technical report focuses on the environmental performance of these six biofuel production pathways in their 2018 SOT cases, as well as in their design cases (future target projections). The results of these renewable hydrocarbon fuel pathways in these SCSA analyses update those for the respective 2015 and 2016 SOT cases (Edward Frank et al. 2016; Hao Cai et al. 2016, 2017; Cai et al. 2018) in the case of IDL, algae CAP, and biochemical conversion pathways. They also provide an opportunity to examine the impact of technology improvements in both biomass feedstock production and biofuel production that have been achieved in 2018 SOTs on the sustainability performance of these renewable transportation fuels, and they reflect updates to Argonne National Laboratory's Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET[R]) model, which was released in October 2018 (Wang et al. 2018). These GREET updates include production of natural gas, electricity, and petroleum-based fuels that can influence biofuels' supply chain greenhouse gas (GHG) (CO 2 , CH 4 , and N 2 O) emissions, water consumption and air pollutant emissions. GHG emissions, water consumption, and 2 nitrogen oxides (NO x ) emissions are the main sustainability metrics assessed in this analysis. In this analysis, we define water consumption as the amount of water withdrawn from a freshwater source that is not returned (or returnable) to a freshwater source at the same level of quality. Life-cycle fossil energy consumption and net energy balance, which is the life-cycle fossil energy consumption deducted from the renewable biofuel energy produced, are also assessed.

09 BIOMASS FUELS↗