Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Airframes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Transonic transport study: Structures and aerodynamics

The structural and aerodynamic aspects of a general study of advanced transonic transports are presented. Aircraft designed to cruise at Mach numbers of 0.90, 0.98, and 1.15 were comparatively analyzed. The wings of all three aircraft employ supercritical sections, and the two aircraft with the highest cruise Mach numbers also employ fuselage area ruling. Structural/aerodynamic characteristics and interactions are investigated both parametrically and with the aid of an automated configuration optimization program. The effects of replacing conventional aluminum airframe structure by advanced filamentary composite (carbon/epoxy) structure receive particular attention. The methods employed in the structural/aerodynamic analysis are discussed.

Ardema, M. D.↗

Inflight dynamics testing of the Apollo spacecraft

Response of the Apollo command module, service and lunar module airframe while in a docked configuration in the flight environment was measured in a frequency band encompassing the first two bending modes. Transfer characteristics from thrust-application point to control-system sensor were examined. The frequency and the stability margins of the first two predominant structural resonances were verified by the test. This report describes the flight test that was performed and the postflight data analysis.

Peters, W. H.↗

The Boeing 747 fatigue integrity program

The fatigue integrity program which was established to insure economic operations and to provide foundation data for inspection and maintenance is discussed. Significant features of the 747 fatigue integrity program are: (1) fatigue analyses which are continually updated to reflect design changes, fatigue test results, and static and flight load survey measurements; (2) material selection and detail design by using initial fatigue analyses, service experience, and testing; and (3) fatigue testing to check detail design quality and to verify the analyses, culminated by the test of a structurally complete airframe. Fatigue stress analyses were performed with the aid of experimental as well as analytical procedures. Extensive application was made of the stress severity factor, developed at Boeing, for evaluating peak stresses in complex joints. A frame of reference was established by families of structural fatigue performance curves (S-N curves) encompassing the range of materials and fatigue qualities anticipated for the 747 airplane design.

Spencer, M. M.↗

Fatigue and fail-safe design features of the DC-10 airplane

The philosophy and methods used in the design of the DC-10 aircraft to assure structural reliability against cracks under repeated service loads are described in detail. The approach consists of three complementary parts: (1) the structure is designed to be fatigue resistant for a crack-free life of 60,000 flight hours; (2) inasmuch as small undetected cracks could develop from other sources, such as material flaws and manufacturing preloads, the structure also is designed to arrest and control cracks within a reasonable service-inspection interval; and (3) a meaningful service-inspection program has been defined on the basis of analysis and test experience from the design development program. This service-inspection program closes the loop to assure the structural integrity of the DC-10 airframe. Selected materials, fasteners, and structural arrangements are used to achieve these design features with minimum structural weight and with economy in manufacturing and maintenance. Extensive analyses and testing were performed to develop and verify the design. The basic design considerations for fatigue-resistant structure are illustrated in terms of material selection, design loads spectra, methods for accurate stress and fatigue damage analysis, and proven concepts for efficient detail design.

Stone, M. E.↗

Propulsion technology for an advanced subsonic transport

Engine design studies for future subsonic commercial transport aircraft were conducted in parallel with airframe studies. These studies surveyed a broad distribution of design variables, including aircraft configuration, payload, range, and speed, with particular emphasis on reducing noise and exhaust emissions without severe economic and performance penalties. The results indicated that an engine for an advanced transport would be similar to the currently emerging turbofan engines. Application of current technology in the areas of noise suppression and combustors imposed severe performance and economic penalties.

Beheim, M. A.↗

Rotor systems research aircraft predesign study. Volume 2: Conceptual study report

The overall feasibility of the technical requirements and concepts for a rotor system research aircraft (RSRA) was determined. The designs of two aircraft were then compared against the RSRA requirements. One of these is an all new aircraft specifically designed as an RSRA vehicle. A new main rotor, transmission, wings, and fuselage are included in this design. The second aircraft uses an existing Sikorsky S-61 main rotor, an S-61 roller gearbox, and a highly modified Sikorsky S-67 airframe. The wing for this aircraft is a new design. Both aircraft employ a fan-in-fin anti-torque/yaw control system, T58-GE-16 engines for rotor power, and TF34-GE-2 turbofans for auxiliary thrust. Each aircraft meets the basic requirements and goals of the program. The all new aircraft has inflight variable main rotor shaft tilt, a side-by-side cockpit seating arrangement, and is slightly faster in the compound mode. It is also somewhat lighter since it uses new dynamic components specifically designed for the RSRA. Preliminary development plans, including schedules and costs, were prepared for both of these aircraft.

Schmidt, S. A.↗

Compressive strength of titanium alloy skin-stringer panels selectively reinforced with boron-aluminum composite.

Description of a method of selectively reinforcing conventional titanium airframe structure with unidirectional boron-aluminum composite attached by brazing which has been successfully demonstrated based on compression tests of short skin-stringer panels. Improvements in structural performance exceeded 25% on an equivalent weight basis over the range from room temperature to 800 F, both in terms of initial buckling and maximum strengths. Room-temperature performance was not affected by prior exposure at 600 F for 1000 hours in air, or by 400 cycles between -65 and 600 F. The experimental results were generally predictable on the basis of existing analytical procedures. No evidence of failure was observed in the braze bond between the boron-aluminum composite and the titanium alloy.

Herring, H. W.↗

The NASA Advanced Transport Technology Program.

Review of an advanced technology program initiated by NASA to expedite the development and application of advanced technologies to the next generation of subsonic CTOL jet transports. The major technical elements of this program include airframe and engine system studies for identifying technology needs, technology development for providing the necessary base in those areas of the aeronautical disciplines offering significant payoffs, and exploratory flight vehicles for validating advanced concepts and demonstrating specific benefits associated with civil applications. The possible benefits and application of the NASA-developed supercritical aerodynamic technology are discussed in some detail. Early experimental aerodynamic results obtained from wind tunnel and flight investigations are included.

Ayers, T. G.↗

Advanced transport structures and materials technology.

A program was undertaken regarding the economic benefits attainable through the application of advanced technologies to the next generation of long-range transport aircraft in the Mach number range from 0.85 to 1.0. In addition to airframe studies, two parallel engine systems studies contracts are also in progress. The manufacturability of composites promises structural concepts which can take forms very similar to those employed in conventional structures or forms very different from conventional approaches. It is pointed out that the findings of the studies discussed justify a considerably expanded effort not only in composite materials but also in other technologies.

Goble, R. L.↗

Noise control technology for jet-powered STOL vehicles.

Progress report on the problem of community noise control for jet-powered STOL aircraft. Noise goals are discussed, along with noise control approaches for meeting these goals. Such significant noise control factors as the basic engine cycle, engine-airframe integration varieties, and certain details of the lift augmentation system are given special attention.

Hubbard, H. H.↗

Measurement of high altitude air quality using aircraft

The minor atmospheric constituents associated with and affected by aircraft exhaust emissions at altitudes from 6 to 20 km will be monitored in flight programs presently being implemented. Preliminary in situ data are available from flight tests of dedicated instruments to be used in these programs. A Global Atmospheric Sampling Program using Boeing 747 airliners was determined to be feasible in studies conducted by airlines and airframe companies. Worldwide monitoring in the troposphere and the lower stratosphere is planned. Stratospheric air sampling on a more local basis will be done with a U2 aircraft. Measuring system evaluations and improvements have been required to detect the low background levels.

Rudey, R. A.↗

V/STOL tilt rotor study. Volume 5: A mathematical model for real time flight simulation of the Bell model 301 tilt rotor research aircraft

A mathematical model for real-time flight simulation of a tilt rotor research aircraft was developed. The mathematical model was used to support the aircraft design, pilot training, and proof-of-concept aspects of the development program. The structure of the mathematical model is indicated by a block diagram. The mathematical model differs from that for a conventional fixed wing aircraft principally in the added requirement to represent the dynamics and aerodynamics of the rotors, the interaction of the rotor wake with the airframe, and the rotor control and drive systems. The constraints imposed on the mathematical model are defined.

P B Harendra↗

Structural technologies - Systems challenges and NASA thrusts.

Some significant areas of emphasis in the NASA airframes structures program are highlighted. The topics treated include automated analysis and design processes, building confidence in advanced composites, improving the technology base for future supersonic and hypersonic vehicles, validation of concepts for active control systems, development of predictive methods for aircraft loads and aeroelasticity, and generation of methodology to assure structural integrity as a part of the design process. An integrated long-range program for fatigue and fracture is recommended.

Brooks, G. W.↗

Research on future short-haul aircraft at the NASA Langley Research Center.

Some of the current research for improving our short-haul air-transportation system is reviewed. Promising aircraft range from helicopters, turbofan-powered STOL, through mechanical flap reduced take-off and landing (RTOL) concepts. Advanced rotorcraft technology can provide improved passenger, community, operational, and economic acceptability of civil transport helicopters. From wind-tunnel and design studies, techniques are available for achieving low-noise fixed-wing STOL and RTOL through proper engine and airframe design. Agreeable ride qualities, crosswind landing capability, and all-weather terminal operation are also goals of present effort.

Riebe, J. M.↗

Low-cost fabrication and installation of ablative heat shields for the space shuttle orbiter.

Description of the formulation and evaluation of low-density elastomeric ablative compounds and low-cost techniques for fabricating and installing ablative panels being considered for the Space Shuttle orbiter's thermal protection system. Sixteen large panels, both flat and contoured, were successfully fabricated and time-studied to develop and refine tooling and manufacturing methods and to establish a realistic baseline for estimating costs. Six of the panels were bonded to a DC-3 airframe. The work included a detailed estimate of fabrication and installation costs.

Norwood, L. B.↗

Measurement of high-altitude air quality using aircraft.

The minor atmospheric constituents associated with and affected by aircraft exhaust emissions at altitudes from 6 to 20 km will be monitored in flight programs presently being implemented. Preliminary in situ data are available from flight tests of dedicated instruments to be used in these programs. A Global Atmospheric Sampling Program using Boeing 747 airliners was determined to be feasible in studies conducted by airlines and airframe companies. Worldwide monitoring in the troposphere and the lower stratosphere is planned. Stratospheric air sampling on a more local basis will be done with a U2 aircraft. Measuring system evaluations and improvements have been required to detect the low background levels.

Rudey, R. A.↗

Shrouded fan propulsors for light aircraft.

Continued growth of general-aviation over the next 10-15 years is dependent upon continuing improvement in aircraft safety, utility, performance, and cost. An attractive, compact, low-noise propulsor concept, the Q-FAN, when matched to reciprocating or rotary combustion engines, opens up the exciting prospect of new, cleaner airframe designs for the next generation of general-aviation aircraft, which will provide these improvements and meet the expected noise and pollution restrictions of the 1980 time period. In this paper, Q-FAN propulsion system performance, weight, noise, and cost trends are discussed. The impact of this propulsion system on the complete aircraft is investigated for two representative aircraft size categories. Examples of conceptual designs for Q-FAN/engine integration and aircraft installations are presented.

Waters, M. H.↗

Refan program. Phase 1: Summary report

The Refan Program is aimed at a large reduction in aircraft approach and takeoff noise in the vicinity of airports caused by the JT3D-powered 707's and DC-8's and the JT8D-powered 727's, 737's and DC-9's. These aircraft represent a major part of the existing commercial fleet. The noise reductions can be achieved by engine and nacelle modifications in the form of aircraft retrofit kits. Engine turbomachinery noise is reduced by replacing the current two-stage fan with a larger single-stage fan and by nacelle acoustic treatment. Jet noise is reduced by the reduction on jet velocity caused by additional turbine work extraction to drive the larger bypass fan. The predicted net effect of these modifications on installed performance is large noise reductions on both approach and takeoff, increased takeoff thrust, decreased takeoff field length, and maintained or improved aircraft range depending on the amount of acoustic treatment included. The Refan Program is being conducted in two phases under contracts with one engine and two airframe companies. Results of the Phase I work are summarized in this report which describes the refan nacelle configurations studied, the airplane modifications required to install the nacelles, and the resulting airplane performance and noise reductions predicted for all five aircraft.

Sams, E. W.↗