Aerodynamic principles for the design of jet- engine induction systems
Jet engine induction systems investigations and relationship of air inlets, drag, airframe, pressure recovery, flow and interferences
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Jet engine induction systems investigations and relationship of air inlets, drag, airframe, pressure recovery, flow and interferences
Fatigue tests using load distributions from actual loading histories encountered in flight are programmed on punched electronic accounting machine cards. With this hydraulic loading system, airframe designers can apply up to 55 load levels to a test specimen.
Intumescent substances for short term ablative protection of airframe structures and avionics devices
Lift engine V/STOL configurations low speed characteristics, measuring exhaust reingestion, inlet pressure, engine and airframe effects in wind tunnels
FORTRAN matrix conversion for implementing FORMAT 2 on system 360 for airframe structural strain analysis
Airframe installation effects on exhaust nozzle systems mounted on underwing engine nacelles at transonic speeds
Damping system for control of structural motion in flexible airframes
F-106B aircraft in-flight study of airframes installation effects on propulsion system performance at transonic speeds
Complex airframe design for economic and safe operation and long life using fatigue and fracture mechanics
Airframe installation effects at transonic speeds on underwing supersonic cruise exhaust nozzles, using flight and wind tunnel tests
Complex airframe design for economic and safe operation and long life using fatigue and fracture mechanics
Airframe installation effects on underwing nacelle nozzle performance, using calibrated engines and load cells on F-106 for measurements
Feasibility assessment of hypersonic transports with actively cooled airframe structure, considering liquid hydrogen fuel use as coolant
A method of selectively reinforcing a conventional titanium airframe structure with unidirectional boron-aluminum composite attached by brazing was successfully demonstrated in compression tests of short skin-stiffener specimens. In a comparison with all-titanium specimens, improvements in structural performance recorded for the composite-reinforced specimens exceeded 25 percent on an equivalent-weight basis over the range from room temperature to 700 K (800 F) in terms of both initial buckling and maximum strengths. Performance at room temperature was not affected by prior exposure at 588 K (600 F) for 1000 hours in air or by 400 thermal cycles between 219 K and 588 K (-65 F and 600 F). The experimental results were generally predictable from existing analytical procedures. No evidence of failure was observed in the braze between the boron-aluminum composite and the titanium alloy.
A modified F-106B aircraft with underwing engine nacelles was flight tested to investigate airframe installation effects on ejector nozzles. Nozzle thrust coefficients, boattail drag coefficients, and boundary layer characteristics were obtained for the three nozzles. All the nozzles were geometrically similar and had 15 deg conical boattails with juncture radii of curvature equal to 0.5 maximum nozzle diameter. The effects of boattail location relative to the wing trailing edge and the ejector to primary nozzle exit diameter ratio were investigated. Shortening the length by 0.48 nozzle diameter lowered the transonic boattail drag rise Mach number from 0.97 to 0.95. Decreasing the nozzle exit diameter, which reduced the ejector to primary nozzle exit diameter ratio from 1.30 to 1.18, increased the gross thrust coefficient 4.8 percent.
The thermal aspects of using filamentary composite materials as primary airframe structures on advanced atmospheric entry spacecraft such as the space shuttle vehicle were investigated to identify and evaluate potential design approaches for maintaining composite structures within allowable temperature limits at thermal protection system (TPS) attachments and/or penetrations. The investigation included: (1) definition of thermophysical data for composite material structures; (2) parametric characterization and identification of the influence of the aerodynamic heating and attachment design parameters on composite material temperatures; (3) conceptual design, evaluation, and detailed thermal analyses of temperature limiting design concepts; and (4) the development of experimental data for assessment of the thermal design methodologies and data used for evaluation of the temperature-limiting design concepts. Temperature suppression attachment concepts were examined for relative merit. The simple isolator was identified as the most weight-effective concept and was selected for detail design, thermal analysis, and testing. Tests were performed on TPS standoff attachments to boron/aluminum, boron/polyimide and graphite/epoxy composite structures.
The structural and aerodynamic aspects of a general study of advanced transonic transports are presented. Aircraft designed to cruise at Mach numbers of 0.90, 0.98, and 1.15 were comparatively analyzed. The wings of all three aircraft employ supercritical sections, and the two aircraft with the highest cruise Mach numbers also employ fuselage area ruling. Structural/aerodynamic characteristics and interactions are investigated both parametrically and with the aid of an automated configuration optimization program. The effects of replacing conventional aluminum airframe structure by advanced filamentary composite (carbon/epoxy) structure receive particular attention. The methods employed in the structural/aerodynamic analysis are discussed.
Response of the Apollo command module, service and lunar module airframe while in a docked configuration in the flight environment was measured in a frequency band encompassing the first two bending modes. Transfer characteristics from thrust-application point to control-system sensor were examined. The frequency and the stability margins of the first two predominant structural resonances were verified by the test. This report describes the flight test that was performed and the postflight data analysis.