SEARCH · Engineering Papers

Results for “Aggregates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Utilizing remote sensing of thematic mapper data to improve our understanding of estuarine processes and their influence on the productivity of estuarine-dependent fisheries

The land-water interface of coastal marshes may influence the production of estuarine-dependent fisheries more than the area of these marshes. To test this hypothesis, a spatial model was created to explore the dynamic relationship between marshland-water interface and level of disintegration in the decaying coastal marshes of Louisiana's Barataria, Terrebonne, and Timbalier basins. Calibrating the model with Landsat Thematic Mapper satellite imagery, a parabolic relationship was found between land-water interface and marsh disintegration. Aggregated simulation data suggest that interface in the study area will soon reach its maximum and then decline. A statistically significant positive linear relationship was found between brown shrimp catch and total interface length over the past 28 years. This relationship suggests that shrimp yields will decline when interface declines, possibly beginning about 1995.

Browder, Joan A.↗

NASA NTRS1989

Proceedings of the Scientific Data Compression Workshop

Continuing advances in space and Earth science requires increasing amounts of data to be gathered from spaceborne sensors. NASA expects to launch sensors during the next two decades which will be capable of producing an aggregate of 1500 Megabits per second if operated simultaneously. Such high data rates cause stresses in all aspects of end-to-end data systems. Technologies and techniques are needed to relieve such stresses. Potential solutions to the massive data rate problems are: data editing, greater transmission bandwidths, higher density and faster media, and data compression. Through four subpanels on Science Payload Operations, Multispectral Imaging, Microwave Remote Sensing and Science Data Management, recommendations were made for research in data compression and scientific data applications to space platforms.

Ramapriyan, H. K.↗

NASA NTRS1989

Advanced double layer capacitors

There is a need for large amounts of power to be delivered rapidly in a number of airborne and space systems. Conventional, portable power sources, such as batteries, are not suited to delivering high peak power pulses. The charge stored at the electrode-electrolyte double layer is, however, much more assessible on a short time scale. Devices exploiting this concept were fabricated using carbon and metal oxides (Pinnacle Research) as the electrodes and sulfuric acid as the electrolyte. The approach reported, replaces the liquid sulfuric acid electrolyte with a solid ionomer electrolyte. The challenge is to form a solid electrode-solid ionomer electrolyte composite which has a high capacitance per geometric area. The approach to maximize contact between the electrode particles and the ionomer was to impregnate the electrode particles using a liquid ionomer solution and to bond the solvent-free structure to a solid ionomer membrane. Ruthenium dioxide is the electrode material used. Three strategies are being pursued to provide for a high area electrode-ionomer contact: mixing of the RuOx with a small volume of ionomer solution followed by filtration to remove the solvent, and impregnation of the ionomer into an already formed RuOx electrode. RuOx powder and electrodes were examined by non-electrochemical techniques. X-ray diffraction has shown that the material is almost pure RuO2. The electrode structure depends on the processing technique used to introduce the Nafion. Impregnated electrodes have Nafion concentrated near the surface. Electrodes prepared by the evaporation method show large aggregates of crystals surrounded by Nafion.

Sarangapani, S.↗

NASA NTRS1989

Fuzzy set applications in engineering optimization: Multilevel fuzzy optimization

A formulation for multilevel optimization with fuzzy objective functions is presented. With few exceptions, formulations for fuzzy optimization have dealt with a one-level problem in which the objective is the membership function of a fuzzy set formed by the fuzzy intersection of other sets. In the problem examined here, the goal set G is defined in a more general way, using an aggregation operator H that allows arbitrary combinations of set operations (union, intersection, addition) on the individual sets Gi. This is a straightforward extension of the standard form, but one that makes possible the modeling of interesting evaluation strategies. A second, more important departure from the standard form will be the construction of a multilevel problem analogous to the design decomposition problem in optimization. This arrangement facilitates the simulation of a system design process in which different components of the system are designed by different teams, and different levels of design detail become relevant at different time stages in the process: global design features early, local features later in the process.

Diaz, Alejandro R.↗

NASA NTRS1989

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 1, part 2:] Technical communications in aeronautics: Results of an exploratory study

A study was undertaken that explored several aspects of technical communications in aeronautics. The study, which utilized survey research in the form of a self-administered questionnaire, was sent to 2,000 randomly selected members of the American Institute of Aeronautics and Astronautics. Six hundred and six usable questionnaires (30.3 percent) were received by the established cut off date. Part 2 of this study lists appendices to part 1, including survey instrument, aggregate totals, cross tabulations, and open-ended comments.

Pinelli, Thomas E.↗

NASA NTRS1988

Nature and origin of C-rich ordinary chondrites and chondritic clasts

The abundance and the isotopic compositions of C, O, and noble gases were investigated together with the petrologic characteristics of four carbon-rich ordinary chondrites (Sharps and Allan Hills A77011, A78119, and A81024) and three C-rich chondritic clasts. The results of the analyses suggest that all of the chondrites and clasts analyzed belong to petrologic type 3 and contain abundant carbon-rich aggregates, which, in at least two of these samples, consist of poorly graphitized carbon commonly associated with metallic Fe,Ni. The data also suggest that the four C-rich chondrites originated on the H, L, and LL parental bodies, but that clasts in Dimmitt and Plainview and other regolith breccias may come from different bodies. The results obtained are consistent with the view that graphite is not a common nebular phase.

Scott, E. R. D.↗

NASA NTRS1988

Manganese oxidation in pH and O2 microenvironments produced by phytoplankton

This paper reports on the oxidation of Mn(II) by pure cultures of Chlorella. It is shown that these cultures establish strong microgradients of pH and O2 concentration due to their photosynthetic activity, and it is demonstrated that Mn oxidation in the pelagic zone of Oneida Lake, New York, is limited to a microzone of high pH and O2 associated with the near-surface aggregates of phytoplankton cells. The data suggest that visible light is important in catalyzing Mn oxidation by driving the photosynthetic removal of CO2 with concomitant increases in pH.

Richardson, Laurie L.↗

NASA NTRS1989

The identification of meteorite inclusions with isotope anomalies

Ca-Al refractory inclusions with characteristic chemical and mineralogical compositions show an enhanced occurrence of 20 pct of isotope anomalies reflecting unknown nucleosynthetic effects for O and Mg. The anomalies are characterized by large isotope fractionation in Mg, apparent deficits in Mg-26/Mg-24, and large correlated effects for isotopes of Ca, Ti, and Cr. These isotope patterns define exotic components depleted in the most neutron-rich isotopes of Ca, Ti, and Cr, or components depleted in isotopes produced in explosive O and Si burning. An opaque assemblage within one of the inclusions yields isotope anomalies in Cr similar to the bulk inclusion and must be intrinsically part of the inclusion and not a trapped, foreign grain aggregate.

Papanastassiou, D. A.↗

NASA NTRS1988

Formation processes and time scales for meteorite parent bodies

The transition from small particles suspended in the solar nebula to the planetesimals (asteroids) that became the parent bodies of meteorites is examined. Planetesimals probably grew by coagulation of grain aggregates that collided due to different rates of settling and drag-induced orbital decay. Their growth was accompanied by radial transport of solids, possibly sufficient to deplete the primordial mass in the asteroid zone, but with relatively little mixing. The formation of asteroid-sized planetesimals was probably rapid, on a time scale less than 1 Myr.

Weidenschilling, S. J.↗

NASA NTRS1989

Origin of opaque assemblages in C3V meteorites - Implications for nebular and planetary processes

The results of analyses of meteoritic opaque assemblages (OAs) are presented and used in conjunction with literature data on phase equilibria and diffusion to further develop the hypothesis of Blum et al. (1989) for the origin of OAs in Ca,Al-rich inclusions (CAIs). Based on the results of the analyses, it is suggested that OAs formed after the crystallization of host CAIs by exsolution, sulfidation, and oxidation of precursor alloys at low temperatures (about 770 K) and higher than solar gas sulfur and oxygen fugacities. This model contrasts with previous models that call upon the formation of CAI OAs by aggregation of previously formed phases in the solar nebula prior to the crystallization of CAIs.

Blum, Joel D.↗

NASA NTRS1989

Stereological characterization of dry alpine snow for microwave remote sensing

A persistent problem in investigations of electromagnetic properties of snow, from reflectance at visible wavelengths to emission and backscattering in the microwave, has been the proper characterization of the snow's physical properties. It is suggested that the granular and laminar structure of snow can be measured in its aggregated state by stereology performed on sections prepared from snow specimens, and that these kinds of measurements can be incorporated into models of the electromagnetic properties. With careful sampling, anisotropy in the snow microstructure at various scales can be quantified. It is shown how stereological parameters can be averaged over orientation and optical depth for radiative transfer modeling.

Davis, Robert E.↗

NASA NTRS1989

Testing of reliability - Analysis tools

An outline is presented of issues raised in verifying the accuracy of reliability analysis tools. State-of-the-art reliability analysis tools implement various decomposition, aggregation, and estimation techniques to compute the reliability of a diversity of complex fault-tolerant computer systems. However, no formal methodology has been formulated for validating the reliability estimates produced by these tools. The author presents three states of testing that can be performed on most reliability analysis tools to effectively increase confidence in a tool. These testing stages were applied to the SURE (semi-Markov Unreliability Range Evaluator) reliability analysis tool, and the results of the testing are discussed.

Hayhurst, Kelly J.↗

NASA NTRS1989

Nonlinear fracture of concrete and ceramics

The nonlinear fracture process zones in an impacted unnotched concrete bend specimen, a prenotched ceramic bend specimen, and an unnotched ceramic/ceramic composite bend specimen were estimated through hybrid experimental numerical analysis. Aggregate bridging in concrete, particulate bridging in ceramics, and fiber bridging in ceramic/ceramic composite are modeled by Barenblatt-type cohesive zones which are incorporated into the finite-element models of the bend specimens. Both generation and propagation analyses are used to estimate the distribution of crack closure stresses in the nonlinear fracture process zones. The finite-element models are then used to simulate fracture tests consisting of rapid crack propagation in an impacted concrete bend specimen, and stable crack growth and strain softening in a ceramic and ceramic/ceramic composite bend specimens.

Kobayashi, Albert S.↗

NASA NTRS1989

Nature and origin of matrix in the unique type 3 chondrite, Kakangari

The characteristics of the matrix of the Kakangari type-3 chondrite were investigated using high-resolution TEM and AEM. It was found that the textural and mineralogical characteristics of the fine-grained matrix of Kakangari are different from those of the other chondrite groups. Unlike the matrix phases present in the CV3 and CO3 chondrites, the matrix mineralogy of Kakangari contains clear information regarding its possible origin and thermal history. Data obtained are most consistent with an origin of Kakangari by annealing, without melting at high temperature (possibly during a chondrule-forming thermal event), of clusters or aggregates of ultrafine-grained amorphous or crystalline phases. The precursor materials were most likely to have been a mixture of nebula and presolar dust. Chondrules in Kakangari were probably formed from identical precursors to the matrix, but reached temperatures sufficiently high to produce melting.

Brearley, Adrian J.↗

NASA NTRS1990

Pressure Gauges Monitor Leakage Past Seals

Method devised to measure leakage of gas past each of two sets of primary and secondary seals into common volume from which aggregate flow measured. Although method applicable only to specific combination of flow configuration and thermal conditions, it serves as example of more general approach involving use of statistical analysis to extract additional information from measurements.

Smith, Steven A.↗

NASA NTRS1989

Three ages of Venus

A central question for any planet is the age of its surface. Based on comparative planetological arguments, Venus should be as young and active as the Earth (Wood and Francis). The detection of probable impact craters in the Venera radar images provides a tool for estimating the age of the surface of Venus. Assuming somewhat different crater production rates, Bazilevskiy et al. derived an age of 1 + or - 0.5 billion years, and Schaber et al. and Wood and Francis estimated an age of 200 to 400 million years. The known impact craters are not randomly distributed, however, thus some area must be older and others younger than this average age. Ages were derived for major geologic units on Venus using the Soviet catalog of impact craters (Bazilevskiy et al.), and the most accessible geologic unit map (Bazilevskiy). The crater counts are presented for (diameters greater than 20 km), areas, and crater densities for the 7 terrain units and coronae. The procedure for examining the distribution of craters is superior to the purely statistical approaches of Bazilevskiy et al. and Plaut and Arvidson because the bins are larger (average size 16 x 10(6) sq km) and geologically significant. Crater densities define three distinct groups: relatively heavily cratered (Lakshmi, mountain belts), moderately cratered (smooth and rolling plains, ridge belts, and tesserae), and essentially uncratered (coronae and domed uplands). Following Schaber et al., Grieve's terrestrial cratering rate of 5.4 + or - 2.7 craters greater than 20 km/10(9) yrs/10(6) sq km was used to calculate ages for the geologic units on Venus. To improve statistics, the data was aggregated into the three crater density groups, deriving the ages. For convenience, the three similar age groups are given informal time stratigraphic unit names, from youngest to oldest: Ulfrunian, Sednaian, Lakshmian.

Wood, Charles A.↗

NASA NTRS1988

Telescience Testbed Pilot Program

The Telescience Testbed Pilot Program (TTPP) is intended to develop initial recommendations for requirements and design approaches for the information system of the Space Station era. Multiple scientific experiments are being performed, each exploring advanced technologies and technical approaches and each emulating some aspect of Space Station era science. The aggregate results of the program will serve to guide the development of future NASA information systems.

Gallagher, Maria L.↗

NASA NTRS1988

Coherent phasing of segmented mirrors

The technical issues associated with a coherently phased segmented mirror can be divided into two types. The first involves the issues of manufacturing the surface quality of the mirror segments themselves (coherent phasing of individual segments). The second involves assembly issues of initializing in 1 G and retaining in 0 G an aggregate segmented mirror (coherent phasing between individual segments). Using a rectangular coordinate system at the vertex of a mirror segment, the rigid body motions are the six translational and rotational degrees of freedom. A first cut primary mirror wavefront error budget is presented. For a minimum operational wavelength of 30 micrometers, the derived values from the budget are: segment surface quality (0.45 micrometers RMS), radius mismatch (50 PPM), segment piston error (1.3 micrometers, segment tip/tilt error (0.6 microrad). Either active or passive segmented mirrors can be addressed, but if the surface quality of the off-axis segment and the radius matching requirements can be passively met, then only segment alignment need be sensed and controlled during operation in orbit. For the active mirror case, dimensional stability of the mirror material during operation is a key factor in establishing the degree of active figure control required.

Jones, Peter A.↗