Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AROMATICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Super oxidation and solidification of organic solvents, polycyclic aromatic hydrocarbons and pesticides at an abandoned chemical factory site

Large quantities of organic chemical such as VOCs, SVOCs and POPs were found in the soil of land at an abandoned Chemical Plant. Technology of super oxidation was applied to the soil for cleanup. Fenton process was utilized to treat soil contaminated heavily by BHC, benzene, chlorobenzene, dichlorobenzene, hexachlorobenzene, dichloroethane, dichloropropane, trichlorobenzene and dichloroether, etc. Super oxidation was coupled with method of stabilization for this case to enhance the remediation effect, which proved to be successful. Concentration of concerned pollutants was brought down below the national regulation level by approximately 8 folds. To make the treated soil strong and effective layer preventing pollutants breaking through, Iron powder was mixed in the soil, forming PBR (Permeable Barrier Reactor), to lower the risk to human health. The site after enhanced super oxidation above was totally safe to be developed into a residential community and/or commercial area. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Effect of Aromatic Solvents Residuals on Electron Mobility of Organic Single Crystals

Balanced electron and hole transport properties are essential for various organic electrical/optoelectrical applications such as organic solar cells, complementary circuits, and light-emitting transistors. However, the electron transport in organic semiconductor lags far behind the hole side, making it with vital significance to seek the factors that limit the electron mobility. Here, the authors demonstrate that the π-conjugated solvents, as essential components in the widely-used solution processing techniques, can significantly suppress the electron transport if they are not properly removed and trapped as residuals. Single crystals of typical p-type materials exhibit a transition from p-type behavior to ambipolar conductance via reducing the amount of solvent residuals, and the same effect is confirmed by varied p-type materials and solvents. The highest electron mobility reaches 0.027 cm 2 V –1 s –1 and 0.029 cm 2 V –1 s –1 for 6,13-bis(triisopropylsilylethynyl)pentacene and 5,15-bis(triisopropylsilylethynyl)tetrabenzoporphyrin, respectively. Finally, this work discloses the non-negligible existence of solvent residuals even in high quality, long-range ordered organic single crystals, and further provides efficient strategies to harvest the n-type behaviors of organic semiconductor materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Electronic Tuning of Mixed Quinoida-Aromatic Conjugated Polyelectrolytes: Direct Ionic Substitution on Polymer Main-Chains

The synthesis of conjugated polymers with ionic substituents directly bound to their main chain repeat units is a strategy for generating strongly electron-accepting conjugated polyelectrolytes, as demonstrated through the synthesis of a series of ionic azaquinodimethane (iAQM) compounds. The introduction of cationic substituents onto the quinoidal para-azaquinodimethane (AQM) core gives rise to a strongly electron-accepting building block, which can be employed in the synthesis of ionic small molecules and conjugated polyelectrolytes (CPEs). Electrochemical measurements alongside theoretical calculations indicate notably low-lying LUMO values for the iAQMs. The optical band gaps measured for these compounds are highly tunable based on structure, ranging from 2.30 eV in small molecules down to 1.22 eV in polymers. The iAQM small molecules and CPEs showcase the band gap reduction effects of combining the donor-acceptor strategy with the bond-length alternation reduction strategy. Finally, as a demonstration of their utility, the iAQM CPEs so generated were used as active agents in photothermal therapy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Electronic Tuning of Mixed Quinoidal-Aromatic Conjugated Polyelectrolytes: Direct Ionic Substitution on Polymer Main-Chains

The synthesis of conjugated polymers with ionic substituents directly bound to their main chain repeat units is a strategy for generating strongly electron-accepting conjugated polyelectrolytes, as demonstrated through the synthesis of a series of ionic azaquinodimethane (iAQM) compounds. The introduction of cationic substituents onto the quinoidal para -azaquinodimethane (AQM) core gives rise to a strongly electron-accepting building block, which can be employed in the synthesis of ionic small molecules and conjugated polyelectrolytes (CPEs). Electrochemical measurements alongside theoretical calculations indicate notably low-lying LUMO values for the iAQMs. The optical band gaps measured for these compounds are highly tunable based on structure, ranging from 2.30 eV in small molecules down to 1.22 eV in polymers. Here, the iAQM small molecules and CPEs showcase the band gap reduction effects of combining the donor-acceptor strategy with the bond-length alternation reduction strategy. As a demonstration of their utility, the iAQM CPEs so generated were used as active agents in photothermal therapy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

σ‐Aromaticity‐Induced Stabilization of Heterometallic Supertetrahedral Clusters [Zn 6 Ge 16 ] 4− and [Cd 6 Ge 16 ] 4−

Abstract In this work, the largest heterometallic supertetrahedral clusters, [Zn 6 Ge 16 ] 4− and [Cd 6 Ge 16 ] 4− , were directly self‐assembled through highly‐charged [Ge 4 ] 4− units and transition metal cations, in which 3‐center–2‐electron σ bonding in Ge 2 Zn or Ge 2 Cd triangles plays a vital role in the stabilization of the whole structure. The cluster structures have an open framework with a large central cavity of diameter 4.6 Å for Zn and 5.0 Å for Cd, respectively. Time‐dependent HRESI‐MS spectra show that the larger clusters grow from smaller components with a single [Ge 4 ] 4− and ZnMes 2 units. Calculations performed at the DFT level indicate a very large HOMO–LUMO energy gap in [M 6 Ge 16 ] 4− (2.22 eV), suggesting high kinetic stability that may offer opportunities in materials science. These observations offer a new strategy for the assembly of heterometallic clusters with high symmetry.

Xu, Hong‐Lei↗
DOE OSTI2019

Polycyclic Aromatic Heterocycles with a Benzo[ c ][1,2]azaborinine Core

2‐Formylphenylboronic acid condenses with active methylene reagents like α‐amino esters, ketones, and lactams directly to give benzo‐fused 1‐hydroxy‐2,1‐azaborines in good yields within minutes under microwave‐accelerated conditions. The new stable boron heterocycles prepared to demonstrate this approach were characterized by NMR spectroscopy. Three members of a new diboron heteropentacyclic ring system, 5a,12a‐diaza‐5,12‐dibora‐5,12‐dihydroxypentacene‐6,13‐dione, were prepared, and one of these highly fluorescent compounds was characterized by X‐ray crystallography. Some key solid‐state structural features revealed by the X‐ray analysis provide a basis for explaining the limited solubility of these pentaheterocycles in common organic solvents.

de Lescure, Louis R.↗
DOE OSTI2017

Density Tunable Graphene Aerogels Using a Sacrificial Polycyclic Aromatic Hydrocarbon

In this paper, we demonstrate a new strategy to tune the density of graphene aerogels. This facile method is capable of producing graphene aerogels over a wide density range without compromising the morphology or quality of the material. Perylenetetracarboxylic acid dianydride serves as a sacrificial filler material that can be thermally decomposed to yield a graphene aerogel with tunable density.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Carbon Nanotube Fiber Ionization Mass Spectrometry: A Fundamental Study of a Multi-Walled Carbon Nanotube Functionalized Corona Discharge Pin for Polycyclic Aromatic Hydrocarbons Analysis

Mass spectrometry continues to tackle many complicated tasks, and ongoing research seeks to simplify its instrumentation as well as sampling. The desorption electrospray ionization (DESI) source was the first ambient ionization source to function without extensive gas requirements and chromatography. Electrospray techniques generally have low efficiency for ionization of nonpolar analytes and some researchers have resorted to methods such as direct analysis in real time (DART) or desorption atmospheric pressure chemical ionization (DAPCI) for their analysis. In this work, a carbon nanotube fiber ionization (nanoCFI) source was developed and was found to be capable of solid phase microextraction (SPME) of nonpolar analytes as well as ionization and sampling similar to that of direct probe atmospheric pressure chemical ionization (DP-APCI). Conductivity and adsorption were maintained by utilizing a corona pin functionalized with a multi-walled carbon nanotube (MWCNT) thread. Quantitative work with the nanoCFI source with a designed corona discharge pin insert demonstrated linearity up to 0.97 (R{sup 2}) of three target PAHs with phenanthrene internal standard. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗