Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AGGLOMERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Comparison of structural and luminescence properties of Dy{sub 2}O{sub 3} nanopowders synthesized by co-precipitation and green combustion routes

Highlights: • Dy{sub 2}O{sub 3} nanopowders were prepared by co-precipitation and eco-friendly green combustion route using plant latex. • Both the products show excellent chromaticity coordinates in the white region, which were quite useful for white LED’s. • Thermoluminescence response of the Dy{sub 2}O{sub 3} product prepared by green synthesis was higher when compared to co-precipitation route. • Structural parameters of Dy{sub 2}O{sub 3} were estimated using Rietveld refinement. • The development of nanosize materials using eco-friendly resources was an attractive non-hazardous chemical route. - Abstract: Dysprosium oxide (Dy{sub 2}O{sub 3}) nanopowders were prepared by co-precipitation (CP) and eco-friendly green combustion (GC) routes. SEM micrographs prepared by CP route show smooth rods with various lengths and diameters while, GC route show porous, agglomerated particles. The results were further confirmed by TEM. Thermoluminescence (TL) responses of the nanopowder prepared by both the routes were studied using γ-rays. A well resolved glow peak at 353 °C along with less intense peak at 183 °C was observed in GC route while, in CP a single glow peak at 364 °C was observed. The kinetic parameters were estimated using Chen’s glow peak route. Photoluminescence (PL) of Dy{sub 2}O{sub 3} shows peaks at 481, 577, 666 and 756 nm which were attributed to Dy{sup 3+} transitions of {sup 4}F{sub 9/2}⟶{sup 6}H{sub 15/2}, {sup 6}H{sub 13/2}, {sup 6}H{sub 11/2} and {sup 6}H{sub 9/2}, respectively. Color co-ordinate values were located in the white region as a result the product may be useful for the fabrication of WLED’S.

36 MATERIALS SCIENCE↗

TiO{sub 2} flower-like nanostructures decorated with CdS/PbS nanoparticles

Highlights: • TiO{sub 2} flower-like nanostructures were prepared with the use of Ti foil and 30% H{sub 2}O{sub 2}. • QDs of CdS and PbS were deposited using the SILAR method. • The SILAR method makes it possible to control the size of QDs. • Band gap energy of CdS was found to be 2.35 eV. • Sensitization of TiO{sub 2} with CdS or PbS improves the photoelectrochemical properties. - Abstract: Flower-like nanostructures of TiO{sub 2} were prepared by immersing Ti foil in 30% H{sub 2}O{sub 2} at 80 °C for times varying from 15 to 240 min. Upon annealing at 450 °C in an Ar atmosphere, the received amorphous samples crystallized in an anatase structure with rutile as a minority phase. SEM images revealed that partially formed flowers were present at the surface of the prepared samples as early as after 15 min of immersion. The size of the individual flowers increased from 400–800 nm after 15 min of reaction to 2.5–6.0 μm after 240 min. It was also found that surface is very rough and surface development is considerable. After 45 min of immersion, the nanoflowers were sensitized with CdS and PbS quantum dots (QDs-CdS/QDs-PbS) deposited using the SILAR method from water- and methanol-based precursor solutions at different concentrations (0.001–0.1 M). QDs-CdS crystallized in the hawleyite structure, while QDs-PbS in the galena form. SEM analysis showed the tendency of quantum dots to agglomerate at high concentrations of the precursor in water-based solutions. QDs obtained from methanol-based solutions were uniformly distributed. The produced QDs-PbS were smaller than QDs-CdS. Based on the optical reflectance spectra, the band-gap energies of TiO{sub 2} nanostructures with and without QDs were calculated to be 3.32 eV for flower-like TiO{sub 2} nanostructures and 2.35 eV for QDs-CdS. The photoelectrochemical behaviour of nanoflowers was found to improve significantly after the deposition of QDs-CdS.

36 MATERIALS SCIENCE↗

Luminescence improvement in Pr{sup 3+} and Gd{sup 3+} activated Sr{sub 2}Mg(BO{sub 3}){sub 2} inorganic phosphor

Highlights: • Sr{sub 2}Mg(BO{sub 3}){sub 2} doped Gd{sup 3+} and Pr{sup 3+} have been synthesized by solution combustion synthesis technique. • Effect of doping concentration of Gd{sup 3+} and Pr{sup 3+} on the luminescence of synthesized material is discussed. • Effect of charge compensation by Li{sup +}, Na{sup +} and K{sup +} on emission intensity is studied in detail. • Efficient energy transfer from Pr{sup 3+} to Gd{sup 3+} in Sr{sub 2}Mg(BO{sub 3}){sub 2} was observed. • Optimum concentration and critical transfer distance for optimum concentration have been determined. - Abstract: The photoluminescence properties of (Sr{sub 1−x}Pr{sub x}){sub 2}Mg(BO{sub 3}){sub 2}; (Sr{sub 1−2x}Pr{sub x}M{sub x}){sub 2}Mg(BO{sub 3}){sub 2,} (M = Li, Na, K); (Sr{sub 1−x}Gd{sub x}){sub 2}Mg(BO{sub 3}){sub 2}; (Sr{sub 1−2x}Gd{sub x}M{sub x}){sub 2}Mg(BO{sub 3}){sub 2}, (M = Li, Na, K) and (Sr{sub 1−4x}Pr{sub x}Gd{sub x}Na{sub 2x}){sub 2}Mg(BO{sub 3}){sub 2} inorganic phosphors prepared by solution combustion synthesis technique are discussed. The structure of the prepared phosphor characterized using Thermogravimetric–differential thermal analysis, X-ray diffraction and fourier transform-infrared. Scanning electron microscopy images of the prepared materials show irregular grains with agglomerate phenomena. Photoluminescence properties were studied at room temperature. Optimum concentration and critical transfer distance of the synthesized phosphors were determined.

36 MATERIALS SCIENCE↗

Chemical degradation of trimethyl phosphate as surrogate for organo-phosporus pesticides on nanostructured metal oxides

Nanostructured TiO{sub 2} and mixed oxides of Ti and Fe, Hf, In, Mn or Zr -were prepared by homogeneous hydrolysis of aqueous solution of metal sulphates with urea. The oxides were characterised by X-ray powder diffraction (XRD), scanning electron microscopy, particle size distribution, surface area and porosity. The oxide materials consists of a few nanometre primary crystals (mainly anatase) arranged in a few micrometre regular spherical agglomerates with specific surface area 133–511 m{sup 2} g{sup −1}. The FTIR diffuse spectroscopy was used for monitoring chemical degradation of trimethylphosphate (TMP) as a surrogate for organo-phosphorus pesticides under ambient and higher temperatures. Undoped TiO{sub 2} and Ti,Mn-mixed oxide were most active in cleavage (hydrolysis) of CH{sub 3}O from TMP at room temperature and 100 °C. Cleavage of CH{sub 3}O in the other studied mixed oxides was not complete until temperature exceeds the boiling point of TMP.

36 MATERIALS SCIENCE↗

A simple route for making surfactant free lead sulfide (PbS) quantum dots

Highlights: • Surfactant free PbS NCs were successfully synthesised using CoSP technique. • The technique eliminates the requirements of washing to remove the ligands. • Grinding using mortar and pestle creates well separated PbS QDs. • Surfactant free PbS NCs are stable and do not show any degradation with time. - Abstract: An efficient, cost effective and less time consuming method suitable for mass production of surfactant free quantum dots (QDs) of lead sulfide (PbS) is reported. PbS nanocrystals (NCs) are first synthesised by continuous spray pyrolysis (CoSP) technique and de-agglomeration into PbS quantum dots (QDs) is achieved by vigorous mechanical grinding using mortar and pestle. Lead acetate and thiourea were used as the precursor materials for preparation of surfactant free PbS NCs. The broadening in XRD peaks of ground NCs as compared to as synthesized PbS NCs clearly indicated the reduction in particle size to be QDs of PbS. The TEM images also showed that ground PbS NCs were nearly spherical in shape having an average diameter in the range of 4–6 nm. The shift in optical gap from 0.41 eV to 1.47 eV supported the QD formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of persistent luminescence of ZnTa{sub 2}O{sub 6}:Pr{sup 3+} by addition Li{sup +}, Na{sup +}, K{sup +} and Cs{sup +} ions

Graphical abstract: The incorporation of the alkali metals (Li, Na, K and Cs) as co-dopants in ZnTa{sub 2}O{sub 6}:Pr{sup 3+} phosphor improved the lifetime of the persistent emission by increasing the quantity of the electron trapping centres. - Highlights: • ZnTa{sub 2}O{sub 6}:Pr{sup 3+} was co-doped with Li{sup +}, Na{sup +}, K{sup +} or Cs{sup +} ions. • Phase pure samples were synthesised. • Enhancement of the persistent emission was achieved by co-doping. • Corresponding electron trapping centres were quantified by a TL reader. - Abstract: Enhancement of the persistent emission was achieved by co-doping ZnTa{sub 2}O{sub 6}:Pr{sup 3+} with Li{sup +}, Na{sup +}, K{sup +} or Cs{sup +} ions. Phase pure samples were synthesised and it was confirmed by the X-ray diffraction pattern which matches that of the standard data. Incorporation of the co-dopant ions introduced strain into the phosphor, which increased with an increase in the ionic radius of the co-dopant ion. The scanning electron microscope image shows that the particles were agglomerated, and the surface images obtained using the Time of flight secondary ion mass spectroscopy showed that the dopant and the co-dopant ions in the phosphor were homogeneously distributed. The persistent emission was enhanced by the co-dopant ions as shown by the lifetime values calculated from the phosphorescence decay curves, and the corresponding electron trapping centres were quantified by thermoluminescence reader.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photocatalytic activity of SnO{sub 2} nanoparticles in methylene blue degradation

Highlights: • Nanosized SnO{sub 2} photocatalysts were prepared with a precipitation method. • SnO{sub 2} nanoparticles displayed high photocatalytic activities for the MB degradation. • OH radicals are the main active species in photocatalysis on the SnO{sub 2} nanoparticles. - Abstract: Nanosized SnO{sub 2} photocatalysts were prepared with a precipitation method and were characterized by performing transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The powder XRD results revealed that the SnO{sub 2} nanoparticles have a typical tetragonal rutile (cassiterite) structure and the average crystallite size was found to be approximately 4.5 nm by using the Debye–Scherrer equation. The prepared SnO{sub 2} nanoparticles consist of agglomerated particles with a mean diameter of around 4–5 nm according to the analysis of TEM images. The XAS data confirmed that the prepared samples have cassiterite structures with tin oxidation state of +4. The prepared SnO{sub 2} nanoparticles were found to exhibit approximately 3.8 times higher activity than bulk SnO{sub 2} in the photodegradation of methylene blue. On the basis of a trapping experiment, we developed a possible mechanism for the photodegradation on SnO{sub 2} nanoparticles.

36 MATERIALS SCIENCE↗

New methods for the preparation and dielectric properties of La{sub 2−x}Sr{sub x}NiO{sub 4} (x = 1/8) ceramic

Highlights: • A new fuel in solution combustion synthesis of fine powder La{sub 15/8}Sr{sub 1/8}NiO{sub 4}. • Changes in the morphology of the ceramic La{sub 15/8}Sr{sub 1/8}NiO{sub 4} after thermobaric treatment. • Changes in structural parameters of the La{sub 15/8}Sr{sub 1/8}NiO{sub 4} after thermobaric treatment. • Increase of the dielectric constant of the thermobaric treated ceramic La{sub 15/8}Sr{sub 1/8}NiO{sub 4}. • Using of dielectric modulus and impedance formalisms, of equivalent circuits method. - Abstract: The perovskite-type oxide La{sub 2−x}Sr{sub x}NiO{sub 4} (x = 1/8) was prepared by a new precursor route. The reaction proceeds in the self-ignition mode. Single-phase powder and gas-tight ceramic samples can be produced by single annealing of decomposition products. It was shown that as a result of thermobaric treatment of La{sub 2−x}Sr{sub x}NiO{sub 4} (x = 1/8) the solid solution La{sub 2−x}Sr{sub x}NiO{sub 4} with a higher concentration of strontium and the second phase La{sub 3}Ni{sub 2}O{sub 7} are formed. Short-term (5 min) thermobaric treatment (P = 2.5 GPa) at t° = 900 °C changes the unit cell parameters, but is not accompanied by structural transitions. At the same time, morphological restructuring of the sample occurs—the agglomerates delaminate into thin plates crystals. It was established that the permittivity of the material exposed to thermobaric treatment is much higher compared to that of the sample annealed at atmospheric pressure and virtually does not depend on frequency in a wide temperature range.

36 MATERIALS SCIENCE↗

Growth and characterization of ZnO nanostructure on TiO{sub 2}-ZnO films as a light scattering layer for dye sensitized solar cells

Graphical abstract: Pictorial representation of (a,b) electron transport path in nanoparticles and nanorods (red arrow marks), and (c,d) light scattering effect on TiO2-ZnO film without and with light scattering layer (blue, red and green arrow marks are incident, transmit and scattering light, respectively). - Abstract: In the present work, we studied the effect of light scattering layer on the performance of DSSCs. TiO{sub 2}-ZnO thin films were coated onto FTO glass substrate by spin coating technique as a photoanode for DSSCs. ZnO nanorods with flower structures were potentiostatically grown on TiO{sub 2}-ZnO films at various potentials from −1.1 to 1–1.3 V as a light scattering layer. XRD patterns reveal that as the deposition potentials increase the growth of ZnO nanorods increases along with (101) plane orientation. FE-SEM images display agglomerated grains and nanorods with flower structures for TiO{sub 2}-ZnO film, and ZnO has grown on TiO{sub 2}-ZnO film at a deposition potential of −1.3 V. UV–vis spectra confirm the TiO{sub 2}-ZnO with ZnO nanorods having a higher light scattering effect, absorbance and dye loading than that of another film. The efficiency of the DSSCs consisting of without and with scattering layer is estimated to be 0.79 and 1.81%, respectively.

36 MATERIALS SCIENCE↗

Thermoluminescence studies of solid-state reaction derived and γ-irradiated SrGd{sub 2}O{sub 4}: Eu{sup 3+} phosphor

Graphical abstract: Effect of heating rates on TL glow curve for SrGd2O4: Eu3+ doped samples exposed with 3 kGy gamma dose. - Highlights: • SrGd{sub 2}O{sub 4}: Eu{sup 3+} phosphors have been prepared by solid-state reaction method. • The TL properties of γ-irradiated SrGd{sub 2}O{sub 4}: Eu{sup 3+} phosphors were studied in detail. • Linear dose response, less fading and high reusability of SrGd{sub 2}O{sub 4}:Eu{sup 3+} phosphors unfold its applicability as TL dosimeters. - Abstract: Eu{sup 3+} activated SrGd{sub 2}O{sub 4} phosphors were synthesized by conventional high-temperature solid-state reaction method in air ambiance. The structural and thermoluminescence (TL) aspects of as-prepared phosphors were explored by XRD, FESEM, TEM and TL techniques. Orthorhombic phase formation and agglomerated ginger-like morphology of as-synthesized SrGd{sub 2}O{sub 4}: Eu{sup 3+} samples were unfolded by X-ray diffraction (XRD) and microscopic studies, respectively. The effect of impurity (Eu{sup 3+}) contents and heating rates for the TL glow curves was also studied. The TL glow curve of γ-irradiated SrGd{sub 2}O{sub 4}: Eu{sup 3+} shows two well-resolved peaks at 393 K and 598 K with a shoulder at 537 K. The Linear behaviour of as-formed SrGd{sub 2}O{sub 4}: Eu{sup 3+} samples are observed in the dose range 500 Gy–3 kGy. The different trapping parameters were calculated by employing computerized glow curve deconvolution (CGCD) methods Linear dose response, less fading and high reproducibility of SrGd{sub 2}O{sub 4}: Eu{sup 3+} samples broadly indicated its suitability for TL dosimetry applications.

36 MATERIALS SCIENCE↗

Enhanced catalytic activity of mesoporous graphitic carbon nitride on thermal decomposition of ammonium perchlorate via copper oxide modification

Highlights: • Novel mpg-C{sub 3}N{sub 4}/rod-like CuO nanocomposites were synthesized via a facile precipitation method for the first time. • The BET surface area of as-synthesized mpg-C{sub 3}N{sub 4}/CuO is 111.33 m{sup 2} g{sup −1}, which is beneficial for catalyzing the thermal decomposition process of ammonium perchlorate (AP). • The synergistic effect between mpg-C{sub 3}N{sub 4} and CuO was the origin of the high catalytic activity. • The mpg-C{sub 3}N{sub 4}/CuO nanocomposites were applied in catalyzing the thermal decomposition of AP and the proposed catalytic mechanism was also proposed. - Abstract: Aiming at enhancing the catalytic activity of mpg-C{sub 3}N{sub 4} on thermal decomposition of ammonium perchlorate, mpg-C{sub 3}N{sub 4} was successfully modified by CuO nanorods, via a facile precipitation method. The structure, morphology and composition of mpg-C{sub 3}N{sub 4} and mpg-C{sub 3}N{sub 4}/CuO nanocomposites were characterized by nitrogen adsorption-desorption measurements, transmission electron microscopy, scanning electron microscope, X-ray power diffraction, fourier transform infrared spectroscopy, as well as X-ray photoelectron spectroscopy. The results demonstrated that CuO nanorods (length of 200–300 nm, diameter of 10–15 nm) were uniformly dispersed throughout mpg-C{sub 3}N{sub 4}, efficiently avoiding the agglomeration. Finally, it was demonstrated that the high weight-loss decomposition temperature of AP was decreased up to 118.5 °C in the presence of 2 wt% mpg-C{sub 3}N{sub 4}/CuO nanocomposites, which was higher than that of pure mpg-C{sub 3}N{sub 4} and CuO, respectively, demonstrating the catalytic performances of the nanocomposites was enhanced via the synergistic catalysis between mpg-C{sub 3}N{sub 4} and CuO.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of nanocrystalline Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) synthesized by a mechanochemical route

Highlights: • A mechanochemical reaction produces Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl in ambient conditions. • Heating at 600 °C and ulterior washing yields ferrite phase for all the compositions. • The synthesized powders consist of agglomerates of Bi{sub 1-x}La{sub x}FeO{sub 3} nanoparticles. • La-content influences the crystal structure and Néel temperature of the materials. • The presence of two canting levels of antiparallel spins causes a complex magnetism. - Abstract: Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) powders were prepared by means of a solid acid-base reaction induced by mechanochemical energy. Bi, La and Fe chlorides were high-energy ball-milled with NaOH, yielding a mixture of Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl. After heating and washing, nanoparticles of Bi{sub 1-x}La{sub x}FeO{sub 3} were obtained as a main product, with low contents of secondary phases. Structural characterization was performed by X-ray diffraction (Rietveld refinement) and Raman spectroscopy. The hyperfine magnetic behavior was analyzed by means of Mössbauer spectroscopy and the microstructure of the particles was evaluated by transmission electron microscopy. Differential scanning calorimetry was employed to investigate the thermal behavior of the samples and magnetic measurements at room temperature were also carried out. Crystal structure transitions as a function of composition were identified. Moreover, an intricate magnetic behavior was observed, which was explained on the basis of the concomitant contribution of two different canting levels of the antiparallel spins.

36 MATERIALS SCIENCE↗

Characteristics of Co3O4 and cobalt nanostructured microspheres: Morphology, structure, reduction process, and magnetic properties

Highlights: • The metal cobalt samples consist in both α-Co with a hexagonal close-packed lattice and β-Co face-centered cubic crystal at reduction temperatures 220, 240, 300 and 350 °C. • Co{sub 3}O{sub 4} reduction proceeded in successive stages: water removal, residual salt removal, Co{sub 3}O{sub 4} → CoO and CoO → Co transitions. • Inheritance of morphology may have droplet–Co{sub 3}O{sub 4}–Co association. - Abstract: Nanostructured magnetic cobalt microspheres were synthesized using a two-stage method. First, nanostructured cobalt oxide Co{sub 3}O{sub 4} microspheres were produced by ultrasonic spray pyrolysis at different temperatures from 800 to 1100C. Second, the nanostructured powders obtained were reduced to metal cobalt in an hydrogen atmosphere at different temperatures from 220 to 350C. In this study the evolution of the morphology from Co{sub 3}O{sub 4} nanostructured microspheres to nanostructured Co, resulting from the Co{sub 3}O{sub 4} reduction process, and the structure of metal cobalt, were investigated. It was found that the metal cobalt agglomerates have the same shape and mean diameter (∼ 1,5 μm) as those of the cobalt oxide, Co{sub 3}O{sub 4}. The amount of Co microspheres with smaller diameters decreased with increasing reduction temperature. Also, the β-Co content increased with increasing reduction temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synergistic effect of hierarchical SnO2 nanorods/Fe2O3 hexahedrons with enhanced performance as lithium ion battery anodes

Highlights: • SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites were fabricated by a two-step hydrothermal method. • SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites show high capacity and excellent cycling stability. • The enhanced performances benefit from the synergistic effect of SnO{sub 2} and Fe{sub 2}O{sub 3}. • The reduced Fe nanoparticles facilitate the fully conversion reaction of SnO{sub 2}. - Abstract: Hierarchical SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites composed of SnO{sub 2} nanorods and Fe{sub 2}O{sub 3} hexahedrons are successfully prepared by a two-step hydrothermal method. The lithium ion batteries (LIBs) based on as-synthesized products are fabricated to investigate their electrochemical performance. As an anode material for LIBs, SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites deliver a high capacity of 1022 mAh g{sup −1} at 100 mA g{sup −1} after 100 cycles. The cycling stability and rate performance of the nanocomposites are significantly improved. The enhanced performances benefit from the synergistic effect of SnO{sub 2} nanorods and Fe{sub 2}O{sub 3} hexahedrons. The iron (Fe) nanoparticles reduced from Fe{sub 2}O{sub 3} not only facilitate the conversion reaction of SnO{sub 2}, resulting in the high capacity, but also increase the conductivity of the material. In addition, SnO{sub 2} serves as a matrix to protect Fe{sub 2}O{sub 3} from agglomeration, and the hierarchical structure effectively buffers volume changes, thus enhancing the cycling life of LIBs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Biogas reforming over Ni catalysts dispersed in different mixed oxides containing Zn2+, Al3+ and Zr4+cations

Highlights: • The oxides mixture containing NiO, ZnO, Al{sub 2}O{sub 3}, NiAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4} was detected. • The results exhibited intermediate interactions between Ni0 and other phases. • Dry reforming of methane was applied to production of synthesis gas. • Deposition of the carbon filamentous on the catalysts surface was observed. - Abstract: The active phase plays an important role in the catalytic activity. However, its applicability is directly associated with other present phases in the mixture. In view of this, we report the performance of Ni catalysts dispersed on mixed oxides containing Zn{sup 2+}, Al{sup 3+} and Zr{sup 4+}cations in biogas reforming. For this purpose, the samples were characterized by X-ray powder diffraction, which showed the formation of a homogeneous mixture of binary (NiO, ZnO, ZrO{sub 2} and Al{sub 2}O{sub 3}) and ternary (NiAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4}) oxides. The temperature-programmed reduction (H{sub 2}-TPR) provided information on the catalyst reduction. The performance of the catalysts was evaluated using two reduction temperatures (650 °C and 750 °C). The reactions were carried out at 750 °C, where the Ni/ZnAlZr catalyst presented the highest CO{sub 2} conversion attributed to the basic sites, which favored the CO{sub 2} adsorption. Otherwise, the Ni/ZnZr catalyst (reduced at 650 °C) showed a high CH{sub 4} conversion. The catalysts were also reduced at 750 °C and a lower conversion of both reactants (CH{sub 4} and CO{sub 2}) was observed. We argued that the agglomeration process during the reduction condition deteriorates the performance of the catalysts reduced at 750 °C.

09 BIOMASS FUELS↗

Growth and characterization of Cu3SbSe4 thin films through thermally diffusing Sb2Se3 – CuSe by chemical bath deposition (CBD)

Highlights: • Cu{sub 3}SbSe{sub 4} films were formed by chemical bath deposition followed by a heat treatment. • Prepared Cu{sub 3}SbSe{sub 4} thin films have promising properties to absorbing layer in a solar cell or thermoelectric material. • Electrical conductivity values of Cu{sub 3}SbSe{sub 4} are high, considering its manufacturing method and the previous reports in the field. - Abstract: In the present work, Cu{sub 3}SbSe{sub 4} thin films have been successfully synthesized by chemical bath deposition (CBD) involving a sequential deposition of antimony selenide (Sb{sub 2}Se{sub 3}) and copper selenide (CuSe) films and then annealing in a vacuum atmosphere. The influence of CuSe deposition time on the previously deposited Sb{sub 2}Se{sub 3} films was investigated to obtain the ternary phase. A study of the structural, morphological, optical and electrical properties of these films was carried out using appropriate characterization techniques. X-ray diffraction analysis revealed that the films show a tetragonal crystalline crystalline structure corresponding to the Permingeatite phase (Cu{sub 3}SbSe{sub 4}). The crystal size increases with the CuSe deposition time. It is identified by Raman spectroscopy that at low CuSe deposition times a low concentration of Sb{sub 2}Se{sub 3} coexists in the thin film. The optical band gap energy of these films was evaluated in the range of 0.67–1.18 eV, decreasing by increasing CuSe deposition time. By field-emission scanning electron microscopy (FESEM) a morphological study was carried out, observing that by increasing the deposition time of CuSe there is an increase of agglomerates and decrease the porosity in the samples. An elemental analysis was carried out by energy dispersive X-ray spectroscopy to observe the composition and elemental distribution in the ternary compound. The films showed a p-type electrical conductivity with values between 0.417 and 55.55 (Ω cm{sup −1}). The mobility and carrier density were performed by Hall Effect and Thermoelectric measurements observing a slight increase in the values by increasing the time of CuSe deposition. All results obtained for thin films of Cu{sub 3}SbSe{sub 4} suggest that it could be used as an absorber material in a solar cell or thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-assembled hierarchical Sn3O4-multi-wall carbon nanotubes: Facile fabrication, promoted charge separation, and enhanced photocatalytic performances

Highlights: • Controlled self-assembly of Sn{sub 3}O{sub 4} nanoflakes over CNTs was achieved. • The SO-CNT-4 hybrid exhibits the best activity under visible light. • Promoted charge separation efficiency lead to the activity enhancement. - Abstract: Controlled assembling of Sn{sub 3}O{sub 4} nanoflakes over multi-wall carbon nanotubes (CNTs) was achieved for the first time by using a facile hydrothermal method. The SEM and TEM images showed that numerous Sn{sub 3}O{sub 4} nanoflakes were widely assembled over the surface of CNTs. In these hybrids, the CNTs served as dispersing-template could reduce the agglomeration of Sn{sub 3}O{sub 4} nanoflakes, as well as facilitate the interfacial charge transfer because of its high electrical conductivity. The Sn{sub 3}O{sub 4}-CNTs photocatalysts have exhibited remarkably promoted performances in decomposing organic contaminant under visible or solar light. The Sn{sub 3}O{sub 4}-CNTs hybrid with CNTs mass ratio of 4.37% exhibited the best activity under visible light, while that with CNTs mass ratio of 1.41% was more efficient when irradiated by solar light, the activity of which was about 3.47 times higher than that of pristine Sn{sub 3}O{sub 4} under identical conditions. Controlled experiments proved that O{sub 2}{sup −} and h{sup +} played the chief role in decomposing organic pollutants.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of aluminum hydroxide and oxide nanostructures with controllable morphology by wet oxidation of AlN/Al nanoparticles

Highlights: • Aluminum hydroxide nanoparticles were synthesized by wet oxidation methods. • The oxidation conditions of AlN/Al affect the morphologies of the reaction products. • No changes in the synthesized materials morphology occurred up to 1000 °C. • The maxima specific surface areas for the nanostructures were achieved at 500 °C. - Abstract: A simple and environmentally friendly method to prepare aluminum oxyhydroxide and trihydroxide nanostructures by wet oxidation of AlN/Al composite nanoparticles was developed. The AlN/Al nanoparticles used were produced by electrical explosion of an aluminum wire in nitrogen atmosphere. The obtained nanostructures were characterized employing X-ray diffraction (XRD), transmission and high-resolution scanning electron microscopy (TEM and HRSEM), thermogravimetric analysis (TGA) and N{sub 2} adsorption-desorption technique (BET). By changing the wet oxidation conditions, aluminum hydroxides with different phase composition, morphology and texture characteristics were synthesized. After calcination at different temperatures, a range of transition and stable alumina nanostructures were obtained that preserved the morphology of the aluminum hydroxide precursors - agglomerated nanosheets, nanoplates or hexagonal nanorods, up to 1000 °C. Optimal process parameters for maximum surface area development for all the precursor materials have been established.

77 NANOSCIENCE AND NANOTECHNOLOGY↗