Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Studies on Thorium Adsorption Characteristics upon Activated Titanium Hydroxide Prepared from Rosetta Ilmenite Concentrate

The titanium hydroxide prepared from Rosetta ilmenite concentrate has been applied for Th (IV) adsorption from its acid aqueous solutions. The prepared hydroxide is first characterized by both Fourier transform infrared (FT-IR) spectrum and thermogravimetric analysis. The relevant factors affecting the adsorption process have been studied. The obtained equilibrium data fits well with the Langmuir isotherm rather than Freundlich isotherm, while the adsorption kinetic data follow the pseudo-second order model. The different thermodynamic parameters have also been calculated and indicate that the adsorption process is spontaneous.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective adsorption of L- and D-amino acids on calcite: Implications for biochemical homochirality

The emergence of biochemical homochirality was a key step in the origin of life, yet prebiotic mechanisms for chiral separation are not well constrained. Here we demonstrate a geochemically plausible scenario for chiral separation of amino acids by adsorption on mineral surfaces. Crystals of the common rock-forming mineral calcite (CaCO(3)), when immersed in a racemic aspartic acid solution, display significant adsorption and chiral selectivity of d- and l-enantiomers on pairs of mirror-related crystal-growth surfaces. This selective adsorption is greater on crystals with terraced surface textures, which indicates that d- and l-aspartic acid concentrate along step-like linear growth features. Thus, selective adsorption of linear arrays of d- and l-amino acids on calcite, with subsequent condensation polymerization, represents a plausible geochemical mechanism for the production of homochiral polypeptides on the prebiotic Earth.

Calcium Carbonate/metabolism↗

Evaluating the Adsorptive Capacities of Chemsorb 1000 and Chemsorb 1425

The Air Revitalization Lab at KSC tested Chemsorb 1000 and 1425, two candidate sorbents for use in future air revitalization technologies being evaluated by the ARREM project. Chemsorb 1000 and 1425 are granular coconut-shell activated carbon sorbents produced by Molecular Products, Inc. that may be used in the TCCS. Chemsorb 1000 is a high grade activated carbon for organic vapor adsorption. In contrast, Chemsorb 1425 is a high-grade impregnated activated carbon for adsorption of airborne ammonia and amines. Chemsorb 1000 was challenged with simulated spacecraft gas streams in order to determine its adsorptive capacities for mixtures of volatile organics compounds. Chemsorb 1425 was challenged with various NH3 concentrations to determine its adsorptive capacity.

Evaluating↗

CO2 Adsorption, Diffusion and Electron-Induced Chemistry on Rutile TiO2(110) – A Low-Temperature Scanning Tunneling Microscopy Study

Low-temperature scanning tunneling microscopy (STM) has been used to study the adsorption of CO{sub 2} on rutile TiO{sub 2}(110) from 80 to 180 K. For low CO{sub 2} doses, two molecular adsorption sites with different binding energies are identified, which are effectively isolated from one another by an apparent activation barrier to their interconversion. We identify the less tightly bound adsorption site as CO{sub 2} adsorbed atop 5-fold coordinated titanium surface atoms (Ti{sub 5f}), without binding preferentially near oxygen vacancies. CO{sub 2} desorption from Ti{sub 5f} occurs at 140 K. The more strongly bound site involves molecular CO{sub 2} binding at bridging oxygen vacancies (V{sub O,br}). We observe two distinct configurations of V{sub O,br} bound CO{sub 2} molecules. Despite its being bound to the vacancy, CO{sub 2} does not dissociate thermally but remains intact up to the desorption temperature of {approx}175 K. At an elevated tunneling bias, the STM tip can selectively dissociate these CO{sub 2} molecules and thus trigger the healing of individual V{sub O,br}. At higher coverage, CO{sub 2} adsorption occurs predominantly at the more abundant Ti{sub 5f} sites, with the distribution of CO{sub 2} molecules being determined by interactions both along the [001] and [110] directions.

36 MATERIALS SCIENCE↗

Adsorption of Iodine and Potassium on Bi2Sr2CaCu2O8+δ Investigated by Low Energy Alkali Ion Scattering

The adsorption of K and I on the surface of the high-T{sub c} cuprate BSCCO-2212 is investigated with low-energy (0.8 to 2 keV) Na{sup +} ion scattering and density functional theory (DFT). Samples were cleaved in ultrahigh vacuum and charge-resolved spectra of the scattered ions were collected with time-of-flight. The spectra contain a single peak representing Na scattered from Bi, as the clean surfaces are terminated by BiO. The neutralization of scattered Na depends on the local potential above the target site, and the angular dependence indicates that the clean surface has an inhomogeneous potential. Neutralization is dependent on the coverage of I, but independent of K adsorption. DFT suggests high-symmetry sites for the adsorption of both I and K, and that the potential above the Bi sites is altered by I by an amount consistent with the experimental findings, while the potential is not affected by K adsorption. DFT also enables an experimental determination of the 'freezing distance,' which is the effective point beyond which charge exchange does not occur, to be 1.6 {+-} 0.1 {angstrom} from the outermost Bi layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the adsorption mechanism of a peptide in reversed phase liquid chromatography, from pH controlled and uncontrolled solutions

The single-component equilibrium adsorption of the tripeptide Leucyl-Leucyl-Leucine (LLL) on a high-efficiency Jupiter Proteo column (C{sub 12}) was investigated experimentally and modeled theoretically. The experimental equilibrium isotherms of LLL for adsorption on a C{sub 12} packing material from an aqueous solution of methanol (48%) and trifluoroacetic acid (0.1%) were measured by frontal analysis (FA). The FA measurements were done with two solutions, one in which the pH was controlled, the other in which it was not. Two solutions of LLL in the mobile phase were prepared (4.3 and 5.4 g/L) and their pH measured (2.94 and 2.88), respectively. The first solution was titrated with TFA to match the pH of the mobile phase (2.03), so its pH was controlled. The pH of the other solution was left uncontrolled. In both cases the isotherms could be modeled by a bi-Langmuir equation, a choice consistent with the bimodal affinity energy distribution (AED) obtained for LLL. The isotherm parameters derived from the inverse method (IM) of isotherm determination under controlled pH conditions (by fitting calculated profiles to experimental breakthrough profiles) are in a good agreement with those derived from the FA data. Under uncontrolled pH conditions, the application of IM suggests the coexistence of two different adsorption mechanisms. According to the isotherm parameters found by these three methods (FA, AED and IM), the C{sub 12}-bonded silica can adsorb around 500 and 70 g/L of LLL under controlled and uncontrolled pH conditions, respectively. The adsorption of LLL on the C{sub 12} material strongly depends on the pH of the mobile phase and on the quantity of TFA added, which plays the role of an ion-pairing agent.

10 SYNTHETIC FUELS↗

Off-gas Adsorption Model and Simulation - OSPREY

The absence of industrial scale nuclear fuel reprocessing in the U.S. has precluded the necessary driver for developing the advanced simulation capability now prevalent in so many other countries. Thus, it is essential to model complex series of unit operations to simulate, understand, and predict inherent transient behavior. A capability of accurately simulating the dynamic behavior of advanced fuel cycle separation processes is expected to provide substantial cost savings and many technical benefits. To support this capability, a modeling effort focused on the off-gas treatment system of a used nuclear fuel recycling facility is in progress. The off-gas separation consists of a series of scrubbers and adsorption beds to capture constituents of interest. Dynamic models are being developed to simulate each unit operation involved so each unit operation can be used as a stand-alone model and in series with multiple others. Currently, an adsorption model has been developed within Multi-physics Object Oriented Simulation Environment (MOOSE) developed at the Idaho National Laboratory (INL). Off-gas Separation and REcoverY (OSPREY) models the adsorption of offgas constituents for dispersed plug flow in a packed bed under non-isothermal and non-isobaric conditions. Inputs to the model include gas composition, sorbent and column properties, equilibrium and kinetic data, and inlet conditions. The simulation outputs component concentrations along the column length as a function of time from which breakthrough data can be obtained. The breakthrough data can be used to determine bed capacity, which in turn can be used to size columns. In addition to concentration data, the model predicts temperature along the column length as a function of time and pressure drop along the column length. A description of the OSPREY model, results from krypton adsorption modeling and plans for modeling the behavior of iodine, xenon, and tritium will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Gold and palladium adsorption from leached electronic scrap using ordered mesoporous carbon nanoscaffolds

Ordered mesoporous carbon (OMC) nanoscaffolds are engineered agglomerates of carbon nanotubes held together by small carbon nanofibers with uniform pore sizes, high pore volume, and high channel permeability. These materials exhibit very high affinity for the adsorption of gold from aqueous acidic mixtures. The efficiency of gold recovery is comparable to those typically accomplished using biopolymer-based adsorbents. The adsorption efficiency for other precious metals such as palladium and platinum is lower. Studies on the precious metal (Au, Pd) adsorption on OMC materials from actual liquors of leached electronics will be presented. Adsorption properties will be compared for several different sorbents used for the recovery of precious metals. The leach liquor compositions for three different types of electronic scrap materials (personal computer board, cell phone and tv input/output board) will be presented. The sorption efficiencies for Au, Pd, together with a spectrum of competing and non-competing metals, from such leach mixtures will be compared.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Smoothed Particle Hydrodynamics Model of Competitive Adsorption in Porous Media

Competitive adsorption in porous media occurs in many different areas of science and engineering. Understanding competitive adsorption on the pore scale provides insight into how the porous microstructure and the local conditions effect the overall distribution of species. A smoothed particle hydrodynamics model of competitive adsorption in porous media has been developed, which includes the gas diffusion, advection and surface adsorption of species. The model investigates the effects of the Peclet number and relative reaction rates on the dispersion of a plume of two competitively adsorbing species in a porous medium.

adsorption↗

Two 3D network complexes of Y(III) and Ce(III) with 2-fold interpenetration and reversible desorption-adsorption behavior of lattice water

Two novel inorganic-organic 3D network, namely{l_brace}[Ln(L){sub 1.5}(H{sub 2}O){sub 2}].5H{sub 2}O{r_brace}n [Ln=Y (1), Ce (2); Ln(L){sub 1.5}(H{sub 2}O){sub 2}].5H{sub 2}O [Ln=Y (1), Ce (2)], have been prepared through the assembly of the ligand 1,2-bis[3-(1,2,4-triazolyl)-4-amino-5-carboxylmethylthio]ethane (H{sub 2}L) and lanthanide (III) salts under hydrothermal condition and structurally characterized by single-crystal X-ray diffractions. In complexes 1 and 2, the L{sup 2-} anions adopt three different coordination fashions (bidentate chelate, bidentate bridging and bidentate chelate bridging) connecting Ln(III) ions via the oxygen atoms from carboxylate moieties. Both 1 and 2 exhibit 3D network structures with 2-fold interpenetration. Interestingly, the reversible desorption-adsorption behavior of lattice water is significantly observed in the two compounds. The result shows their potential application as late-model water absorbent in the field of adsorption material. - Graphical abstract: Two inorganic-organic 3D network, namely {l_brace}[Ln(L){sub 1.5}(H{sub 2}O){sub 2}].5H{sub 2}O{r_brace}n [Ln=Y (1), Ce (2)], have been prepared under hydrothermal condition and structurally characterized by single-crystal X-ray diffractions. Both 1 and 2 exhibit 3D network structures with 2-fold interpenetration. Interestingly, the reversible desorption-adsorption behavior of lattice water is significantly observed in the two compounds. The result shows their potential application as late-model water absorbent in the field of adsorption material.

36 MATERIALS SCIENCE↗

Off-gas adsorption model and simulation - OSPREY

A capability of accurately simulating the dynamic behavior of advanced fuel cycle separation processes is expected to provide substantial cost savings and many technical benefits. To support this capability, a modeling effort focused on the off-gas treatment system of a used nuclear fuel recycling facility is in progress. The off-gas separation consists of a series of scrubbers and adsorption beds to capture constituents of interest. Dynamic models are being developed to simulate each unit operation involved so each unit operation can be used as a stand-alone model and in series with multiple others. Currently, an adsorption model has been developed within Multi-physics Object Oriented Simulation Environment (MOOSE) developed at the Idaho National Laboratory (INL). Off-gas Separation and Recovery (OSPREY) models the adsorption of offgas constituents for dispersed plug flow in a packed bed under non-isothermal and non-isobaric conditions. Inputs to the model include gas composition, sorbent and column properties, equilibrium and kinetic data, and inlet conditions. The simulation outputs component concentrations along the column length as a function of time from which breakthrough data can be obtained. The breakthrough data can be used to determine bed capacity, which in turn can be used to size columns. In addition to concentration data, the model predicts temperature along the column length as a function of time and pressure drop along the column length. A description of the OSPREY model, results from krypton adsorption modeling and plans for modeling the behavior of iodine, xenon, and tritium will be discussed. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Adsorption Modeling at the Front and Back Ends of the Nuclear Fuel Cycle

Adsorption is a diverse and complex physicochemical process that has many different applications in chemical, environmental, and nuclear sciences. For example, adsorption can be found at both the front and back ends of the nuclear fuel cycle for (i) capturing uranium from seawater to use as a new source of nuclear fuel and (ii) treatment of the off-gases produced when reprocessing used nuclear fuel. Accurate modeling of these processes is important for the design of efficient capture, recovery, and removal systems for the particular aqueous or gaseous species of interest. A set of algorithms and methods designed for flexibility and portability will greatly improve the ability to rigorously model such a complex set of systems. This approach allows more specific models to be built upon the more generic methods, which gives the overall modeling effort larger breadth and greater usability. Due to the complexity of adsorption processes, it is necessary to develop relatively complex mechanistic models to accurately predict the behavior of engineered adsorption systems. Capture and recovery systems designed for nuclear energy need to have a high level of accuracy to reduce uncertainties and aid in the implementation of separations technologies for efficient nuclear energy systems. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Adsorption and Transport Properties of Zeolite SAPO-34 for Krypton/Xenon Separations

Nuclear power is an economical means of providing carbon-free energy, but requires effective ways to deal with the radioactive waste products. As part of the overall process for recycling used nuclear fuel (UNF), it is necessary to develop technologies to separate the off-gases formed during the fission of uranium and plutonium in nuclear power reactors. The off-gas contains {sup 129}I (radioisotope), NO, NO{sub 2}, CO{sub 2} containing {sup 14}C (radioisotope), {sup 3}H{sub 2}O (radioactive tritium oxide), {sup 85}Kr (radioisotope), and {sup 136}Xe. Separating and capturing each gas is essential to reduce the volume of radioactive waste for storage. Currently there exist economical technologies to separate {sup 129}I and {sup 14}CO{sub 2}. However, Kr and Xe separation is challenging because they are chemically inert and physically very similar. The Kr/Xe mixture is approximately 10/90 by volume and hence the separation of Kr would reduce the volume of radioactive {sup 85}Kr waste by a factor of 10. One way of separating them is by cryogenic distillation wherein they are condensed out as pure streams at very low temperature (Kr boiling point: -153 deg. C, Xe: -108 deg. C). Cryogenic distillation has intensive power requirements and a large system volume, resulting in high capital, operating, and disposal costs. Membrane-based separation using radiation-stable materials such as nanoporous zeolites is an attractive alternative, if membranes with sufficient Kr flux and selectivity can be fabricated. An ideal membrane process would permeate a stream of pure Kr for storage and also produce a retentate of pure Xe which has commercial value (> $8/g at 99+% purity from Airgas{sup R}). Zeolites are nanoporous crystalline aluminosilicate materials with pores that are capable of separating molecules by shape and size. SAPO-34 is a silicoaluminophosphate zeolite with pore size of 0.38 nm. The SAPO-34 is a molecular sieve composed of 3D networks with CHA frame structure containing uniform micropores. Since this pore size is intermediate between the kinetic diameters of krypton (0.36 nm) and xenon (0.396 nm), it was hypothesized that SAPO-34 membranes can separate krypton and xenon by diffusivity differences. Previously we fabricated SAPO-34 membranes and showed that they are capable of separating Kr from Xe. Here we describe a more detailed study of the fundamental adsorption and transport properties of SAPO34. In particular, the permeabilities of Kr and Xe in SAPO-34 are dependent on both their adsorption and diffusion characteristics in the nanoporous zeolite. Typically, nanoporous materials show stronger adsorption of Xe than Kr (due to stronger van der Waals forces) but faster diffusion of Kr (due to smaller kinetic diameter). Therefore the overall membrane selectivity towards Kr will be determined by competition between these two effects. A main objective of this study is to quantify and understand adsorption, diffusion, and permeation in detail and thereby obtain: (1) fundamental parameters useful for design calculations of a Kr/Xe separation membrane process, and (2) an experimental and modeling framework that can provide guidance on the expected limits of performance of SAPO-34 and other zeolite materials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

X-ray Spectromicroscopy Study of Protein Adsorption to a Polystyrene-Polylactide Blend

Synchrotron-based X-ray photoemission electron microscopy (X-PEEM) was used to study the adsorption of human serum albumin (HSA) to polystyrene-polylactide (40:60 PS-PLA, 0.7 wt percent) thin films, annealed under various conditions. The rugosity of the substrate varied from 35 to 90 nm, depending on the annealing conditions. However, the characteristics of the protein adsorption (amounts and phase preference) were not affected by the changes in topography. The adsorption was also not changed by the phase inversion which occured when the PS-PLA substrate was annealed above Tg of the PLA. The amount of protein adsorbed depended on whether adsorption took place from distilled water or phosphate buffered saline solution. These differences are interpreted as a result of ionic strength induced changes in the protein conformation in solution.

36 MATERIALS SCIENCE↗

A Transferable Force Field for Predicting Adsorption and Diffusion of Water in Cationic Zeolites with Coupled Cluster Accuracy

We present a transferable force field for water in proton-exchanged, alkali (Li, Na, K, Rb, and Cs) metal-exchanged, and alkaline-earth (Mg, Ca, Sr, and Ba) metal-exchanged zeolites. The fitting methodology is based on adsorbate–adsorbent interaction energies obtained from periodic density functional theory calculations and corrected using the coupled-cluster method applied to small model clusters. To ensure an accurate prediction of both adsorption and diffusion properties of water, sets of configurations that sample both adsorption sites and intracrystalline hopping transition states were used in the fitting. The quality of the force field is assessed for a wide range of zeolites with different topologies and chemical compositions, demonstrating good agreement between theoretical predictions and experimental measurements of water adsorption and diffusion.

Adsorption↗

CO{sub 2} adsorption-based separation by metal organic framework (Cu-BTC) versus zeolite (13X)

The potential for the metal organic framework (MOF) Cu-BTC to selectively adsorb and separate CO{sub 2} is considered. Isotherms for CO{sub 2}, CH{sub 4}, and N{sub 2} were measured from 0 to 15 bar and at temperatures between 25 and 105{sup o}C. The isotherms suggest a much higher working capacity (x4) for CO{sub 2} adsorption on Cu-BTC relative to the benchmark zeolite 13X over the same pressure range. Higher CO{sub 2}/N{sub 2} and CO{sub 2}/CH{sub 4} selectivities in the higher pressure range (1-15 bar) and with lower heats of adsorption were also demonstrated. Cu-BTC was observed to be stable in O{sub 2} at 25{sup o}C, but its crystallinity was reduced in humid environments. The CO{sub 2} adsorption capacity was progressively reduced upon cyclic exposure to water vapor at low relative humidity (<30%), but leveled out at 75% of its original value after several water adsorption/desorption cycles. 27 refs., 1 fig.

01 COAL, LIGNITE, AND PEAT↗

Data for: Competitive and Cooperative Effects of Chloride on Palladium(II) Adsorption to Iron (Oxyhydr)oxides: Implications for Mobility During Weathering

Data package for manuscript "Competitive and Cooperative Effects of Chloride on Palladium(II) Adsorption to Iron (Oxyhydr)oxides: Implications for Mobility During Weathering" by Emily G. Wright, Xicheng He, Elaine D. Flynn, Daniel E. Giammar, and Jeffrey G. Catalano. The manuscript will be submitted to Geochimica et Cosmochimica Acta. This dataset contains adsorption results from experiments designed to investigate the effect of chloride on Pd(II) adsorption to hematite and 2-line ferrihydrite. This includes lab experiments reacting suspensions of the minerals with various amounts of Pd and chloride at pH 4. We also characterized adsorbed Pd with X-ray absorption fine structure spectroscopy.

58 GEOSCIENCES↗

Geometry-Dependent Nonequilibrium Steady-State Diffusion and Adsorption of Lipid Vesicles in Micropillar Arrays

Micro-and nanofabricated sample environments are useful tools for characterizing diffusion in confined aqueous environments. The steady-state diffusion and adsorption of unilamellar lipid vesicles in arrays of hydrophilic micropillars is investigated. Gradients in the coverage of fluorescently labeled, pillar-supported lipid films, formed from vesicle fusion, are determined from 3D z-stack images using confocal microscopy. The gradients are the result of preferential adsorption of vesicles near the tops of the pillars, which progressively deplete them from solution as they diffuse toward the base of the array. However, the increased propensity for vesicle adsorption near the pillar tops compared to the confined spaces between pillars results in the formation of confluent supported lipid bilayers at the pillar tops that resist the adsorption of additional vesicles while leaving the pillar surfaces below available for binding. This results in a reduction in the numbers of depleted vesicles compared to what one would anticipate based on diffusive fluxes. The resulting inhomogeneous spatial profiles of lipid structures on the pillars are the result of the system being maintained in a dissipative, nonequilibrium steady state during incubation of the pillar arrays in the vesicle solution, which is ultimately quenched by rinsing away the unbound, freely diffusing vesicles.

36 MATERIALS SCIENCE↗