Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Multiply reflected standing Alfven waves in the Io torus - Pioneer 10 observations

Observations from the Voyager 1 pass by the Io flux tube strongly suggest that large amplitude standing Alfven waves are generated as Jovian plasma flows past Io. It has recently been proposed by Gurnett and Goertz (1981) that this Io generated standing Alfven wave system extends an appreciable way around the Io L-shell. Observations are presented here of magnetic perturbations found in the Pioneer 10 record as it crossed the Io L-shell. The field perturbations are found to be qualitatively consistent with the passage of the spacecraft through a standing Alfven wave pattern. The observations suggest an Alfven Mach number of 0.03, which is 1/5 the value inferred from Voyager 1 observations. This implies a lower plasma density at the time of the flyby of Pioneer 10.

Walker, R.↗
NASA NTRS1982

The effect of non-linear propagation in jet noise

An experimental investigation of the nonlinear propagation effects which occur in the noise radiated from low and moderate Reynolds number supersonic jets has been performed. An array of three condenser microphones was used to measure the waveforms propagated by axisymmetric, cold model jets of Mach numbers 2.1 and 2.5. Relatively low Reynolds numbers were obtained by exhausting the jets into a low pressure anechoic test chamber. The results show that phenomena normally associated with nonlinear acoustic propagation, such as wave steepening, harmonic generation and wave merging, are measurable in the high speed model jets.

Gallagher, J. A.↗
NASA NTRS1984

Generation of instability waves in flows separating from smooth surfaces

This paper analyses the coupling between an imposed disturbance and an instability wave that propagates downstream on a shear layer which emanates from a separation point on a smooth surface. Since the wavelengths of the most-amplified instability waves will generally be small compared with the streamwise body dimensions, the analysis is restricted to this 'high-frequency' limit and the solution is obtained by using matched asymptotic expansions. An 'inner' solution, valid near the separation point, is matched onto an outer solution, which represents an instability wave on a slowly diverging mean flow. The analysis relates the amplitude of this instability to that of the imposed disturbance.

Goldstein, M. E.↗
NASA NTRS1987

Electric potential distributions at the interface between plasmasheet clouds

At the interface between two plasma clouds with different densities, temperatures, and/or bulk velocities, there are large charge separation electric fields which can be modeled in the framework of a collisionless theory for tangential discontinuities. Two different classes of layers were identified: the first one corresponds to (stable) ion layers which are thicker than one ion Lamor radius; the second one corresponds to (unstable) electron layers which are only a few electron Larmor radii thick. It is suggested that these thin electron layers with large electric potential gradients (up to 400 mV/m) are the regions where large-amplitude electrostatic waves are spontaneously generated. These waves scatter the pitch angles of the ambient plasmasheet electron into the atmospheric loss cone. The unstable electron layers can therefore be considered as the seat of strong pitch angle scattering for the primary auroral electrons.

Evans, D. S.↗
NASA NTRS1986

Three-dimensional, time-dependent, MHD model of a solar flare-generated interplanetary shock wave

A three-dimensional time-dependent MHD model of the propagation of an interplanetary shock wave into an ambient three-dimensional heliospheric solar wind is initialized with a peak velocity of 1000 km/s at the center of a right circular cone of 18 deg included angle at 18 solar radii. Differences from a previous 2-1/2 simulation (Wu et al., 1983; Gislason et al., 1984; Dryer et al., 1984) include diminuation of the solar peak velocity and concentration of the peak density at each radius. The IMF magnitude starts with high-latitude peaks, and helical-like IMF rotation is noted due to a large-amplitude nonlinear Alfven wave in the shocked plasma.

Dryer, M.↗
NASA NTRS1987

Generation of plasma waves by thick-target electron beams, and the expected radiation signature

The production of plasma waves by a nonthermal beam of high-energy electrons injected into a background thermal plasma was investigated. The coupled kinetic equations for nonthermal electrons were solved, and the level of the plasma waves produced by the bump-on-tail instability arising as a result of the Coulomb collisions of nonthermal electrons with background plasma was estimated. In addition, the radiation signatures of these waves were examined. It is shown that the wave-particle interactions have a significant effect on the overall distribution of the electrons and that it is unlikely that such effects can be discerned in the observed bremsstrahlung or synchrotron radiation of the nonthermal electrons. However, a significant fraction of the energy lost by the beam is transferred to plasma waves and is then dissipated by the thermal plasma.

Hamilton, Russell J.↗
NASA NTRS1990

Boundary layer receptivity due to three-dimensional convected gusts

Compressible fully three-dimensional interactions involving convected free-stream disturbances are analyzed by utilizing a rapid distortion theory in conjunction with triple-deck concepts. Only one class of regions where the boundary layer is receptive is considered; these regions are downstream from the leading edge, where a local feature, such as a wall hump, forces the boundary layer to make a short-scale adjustment. The results obtained are applicable to a variety of situations such as receptivity due to shallow three-dimensional roughness elements or three-dimensional wall-suction distributions. The influence of the gust orientation, frequency, and the type of mean flow disturbance on the amplitudes of the generated instability waves is demonstrated. It is found that a three-dimensional instability wave can be generated by the interaction of an oblique gust with a two-dimensional mean flow disturbance.

Choudhari, Meelan↗
NASA NTRS1994

Generation of electrostatic waves as a consequence of chaotic ion acceleration in the neutral sheet

The stability of ion distributions with velocity space holes caused by chaotic ion acceleration in the vicinity of the field reversal region in the Earth's magnetotail is investigated. It is shown that such distributions are unstable to electrostatic waves with wave vector directed along the Sun-Earth line. The solution of the quasi-linear equation shows that the saturation of the instability occurs due to velocity space trapping of the low-energy background ions and results in a flattening of the reduced ion distribution function in the region of the original velocity space hole. The energy level of the excited waves in the vicinity of the Earth's midplane is estimated as a function of the initial size of the empty velocity space region.

Burinskaya, T.↗
NASA NTRS2006

Control of Supersonic Boundary Layers Using Steady Suction

Control of supersonic boundary layers using steady suction through a series of very small two-dimensional strips is numerically investigated at a free stream Mach number of 1.8. The mean flow induced by rows of suction holes is also computed. Both the steady and unsteady solutions are obtained by solving the full Navier-Stokes equations using the 5th-order accurate weighted essentially non-oscillatory (WENO) scheme for space discretization and using third-order total-variationdiminishing (TVD) Runge-Kutta scheme for time integration. Computations for the two-dimensional cases are performed at suction coefficients 0.001 and 0.002 to investigate the stabilizing effects of suction. The simulation showed that a series of shock waves are generated at the slots. The stability results showed that the total amplification is reduced up to the end of the computational domain. However, the growth rates become larger at downstream distances away from the suction region. The computations for the suction holes showed the generation of Mach waves from each hole and the formation of longitudinal vortices.

Balakumar, P.↗
NASA NTRS2013

Parameter Estimation for Compact Binary Coalescence Signals with the First Generation Gravitational-Wave Detector Network

Compact binary systems with neutron stars or black holes are one of the most promising sources for ground-based gravitational-wave detectors. Gravitational radiation encodes rich information about source physics; thus parameter estimation and model selection are crucial analysis steps for any detection candidate events. Detailed models of the anticipated waveforms enable inference on several parameters, such as component masses, spins, sky location and distance, that are essential for new astrophysical studies of these sources. However, accurate measurements of these parameters and discrimination of models describing the underlying physics are complicated by artifacts in the data, uncertainties in the waveform models and in the calibration of the detectors. Here we report such measurements on a selection of simulated signals added either in hardware or software to the data collected by the two LIGO instruments and the Virgo detector during their most recent joint science run, including a blind injection where the signal was not initially revealed to the collaboration. We exemplify the ability to extract information about the source physics on signals that cover the neutron-star and black-hole binary parameter space over the component mass range 1M25M and the full range of spin parameters. The cases reported in this study provide a snapshot of the status of parameter estimation in preparation for the operation of advanced detectors.

Aasi, J.↗
DOE OSTI2021

Probing Microstructure-induced Swelling & Thermal Property Changes in Ion-Irradiated Oxide Fuels using Laser-generated Surface Acoustic Waves

Radiation of fuel rods with neutrons during a fission reaction in a nuclear reactor is known to affect the material microstructure of the fuel as a result of fission fragment damage, and lead to the formation of atomic-level defects such as voids, dislocation loops, and lattice swelling from fission-gas release. A consequence of the radiation-induced damage in nuclear fuels is the drastic alteration of material properties, in particular, the reduction of the thermal conductivity – a key parameter that governs the transport of thermal energy released from fissile fuel atoms to the surrounding coolant. Swelling can induce high stresses and ultimate failure of the cladding. A fundamental understanding of the role of radiation-induced damage on the thermal transport and mechanical properties of nuclear fuels is therefore critical for efficient, reliable and safe operation of a nuclear power plant. As opposed to conventional post-irradiation examination techniques that are often time-consuming and require significant sample preparation, laser-based characterization methods have emerged as promising non-contact, non-destructive tools to measure the evolution of microstructure-induced material property changes. Moreover, laser methods offer the promise of in-situ characterization while the material is being irradiated. This project aims to develop an improved understanding of the impact of radiation-induced changes to material microstructure on the thermal and elastic properties of nuclear materials. A laser ultrasonic technique, known as the transient grating (TG) spectroscopy method, is used to simultaneously measure thermal diffusivity and elastic properties in unirradiated and ion-irradiated oxide nuclear fuel samples. The results will complement on-going investigations on electron- and phonon-mediated thermal transport in nuclear materials and will provide foundational work for incorporating the influence of defects in fuel performance codes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2000

Modeling Planetary Waves in the Middle Atmosphere

In our 3D Numerical Spectral Model (NSM) that incorporates the Doppler Spread Parameterization of Hines, planetary waves are generated with zonal wavenumbers 1-4 that have amplitudes as large as 25 m/s and periods between 50 and 2 days. The waves are generated spontaneously, i.e., without external source, and presumably represent normal modes. Numerical experiments are discussed to shed light on the generation mechanisms. For the wavenumbers 1 and 2 with periods primarily between 4 and 15 days, both eastward and westward propagating waves are generated and their amplitudes are affected significantly by the gravity wave source. For the wavenumbers, 3 and 4 in the upper mesosphere, the waves are virtually monochromatic, with periods around 2.5 days and they propagate westward. These waves behave like Rossby gravity waves; their amplitudes are largest during solstice where the baroclinic instability is playing an important role, but the waves decay when the gravity wave momentum source is turned off. The planetary waves generated in the model produce large amplitude modulations of the diurnal tides at altitudes above 80 km, but contrary to expectations they are not playing an important role for the seasonal variations of the tides. Preliminary results show that such Rossby gravity waves are also generated near the tropopause and are influencing significantly the QBO that is generated in the model.

Mengel, J. G.↗