SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
ProtoDUNE Single-Phase (ProtoDUNE-SP) is full-scale prototype of a DeepUnderground Neutrino Experiment (DUNE) Far Detector module.• Operates as a liquid argon time projection chamber.
The Short-Baseline Near Detector (SBND) is the first Liquid Argon Time Projection Chamber (LArTPC) with high enough resolution and large enough neutrino flux to measure the cross-section for production of heavier-than-proton fragments in neutrino interactions. SBND is an 112-ton LArTPC, and lies 110 m downstream from the Booster Neutrino Beam target, where it is collecting more than two million neutrino interactions per year. As a result of both the intranuclear cascade and nuclear de-excitation, neutrino interactions with argon can produce nuclear clusters such as deuterons, tritons, helions and alpha particles, which have so far only been seen as vertex activity or mis-reconstructed as protons. With LArTPC technology's excellent reconstruction capabilities and SBND's unprecedented neutrino statistics, a measurement of these nuclear clusters could distinguish between nuclear models and improve neutrino energy reconstruction. This poster presents the status of simulation and reconstruction of nuclear clusters in SBND.
The major goal of the project was to investigate the nonsequential ionization dynamics of atomic systems with two active electrons under intense laser irradiation. In order to gain insights into such nonlinear dynamical systems, one must resort to clever numerical methods due to the poor scaling of computational memory and time. Accordingly, we have extended the virtual detector method of Feuerstein and Thumm by incorporating quasi-classical “virtual” particles that evolve alongside the Schrödinger wavefunction. A major and recent part of this research effort was to further extend the virtual-detector method to model a two-active-electron atomic system.
urrent and upcoming neutrino experiments at Fermilab will rely on liquid argon time projection chambers (LArTPCs) as the primary detector technology. To reach the ambitious precision required for their physics goals, a detailed understanding of neutrino-argon scattering must be achieved. For the present Short-Baseline Neutrino program, the dominant reaction channel is charged-current muon neutrino interactions leading to mesonless final states with and without protons. Using a large data set of neutrino interactions recorded by the MicroBooNE LArTPC detector at Fermilab, we report progress towards new measurements of differential cross sections in this channel. The analysis leverages multiple event reconstruction paradigms and observables specifically chosen to maximize sensitivity to nuclear effects of interest for improving neutrino scattering models. Related previous cross-section results from MicroBooNE and a preview of what to expect from the new analysis will both be featured in this presentation.
Production of nuclear clusters such as deuterons, tritons, helions and alpha particles has only recently been simulated for neutrino-nucleus interactions, and has not yet been measured in neutrino experiments. The Short-Baseline Near Detector (SBND) is the first Liquid Argon Time Projection Chamber (LArTPC) with high enough resolution and a large enough neutrino flux to accurately measure the cross-section for the production of heavier-than-proton fragments in neutrino interactions. SBND is a 112-ton LArTPC, and lies 110 m downstream from the Booster Neutrino Beam target, where it has already collected the world's largest dataset of neutrino-argon interactions. In these processes, the intranuclear cascade and nuclear de-excitation stages can both produce nuclear clusters. With LArTPC technology's excellent reconstruction capabilities and SBND's unprecedented neutrino statistics, a measurement of these nuclear clusters could distinguish between nuclear models and improve neutrino energy reconstruction. This poster presents the status of simulation, reconstruction, and prospects for a measurement of nuclear clusters in SBND.
The Deep Underground Neutrino Experiment (DUNE) is a cutting-edge, long-baseline experiment under construction in the United States, based on large liquid-argon time projection chambers (LArTPCs). The DUNE Near Detector LArTPC (ND-LAr) will employ a novel modular architecture using a pixelated LArPix charge readout. To validate this design and characterize detector response, the 2×2 demonstrator—an array of eight optically isolated LArTPC modules—was deployed at Fermilab in 2024. During winter 2025, the 2x2 demonstrator was operated for a second data-taking campaign (Run 2) with the aim of studying the low-energy response of the detector. Run 2 focused on calibration and response studies using a suite of deployed radioactive sources. Gamma sources (²²Na, ⁶⁰Co, and ⁸⁸Y) were used to probe module-to-module performance variations, energy resolution, and calibrations. Neutron sources (AmBe and a pulsed neutron generator) enabled studies of neutron interactions in liquid argon, including inelastic scatters and neutron capture signals, relevant for low-energy backgrounds and detector modeling. In addition, the detector was doped with ²²⁰Rn, providing Bi–Po coincidence signals that allow precise calibration of the charge and scintillation response. This poster will present results from these calibration campaigns. These studies provide critical validation of the ND-LAr modular LArTPC concept and inform calibration and reconstruction strategies for the full DUNE near detector.
MicroBooNE is the first phase of Fermilab’s Short Baseline Neutrino (SBN) Liquid Argon Time Projection Chamber (LArTPC) programme.This proceeding outlays the first characterisation of electron neutrinos in a muon neutrino beam with the LArTPC detector technology. The Booster Neutrino Beam has an energy peaking around 1GeV and an electron content of approximately 0.5%. The analysis investigates electrons produced in charged-current electron neutrino interactions. The kinematics of the electrons are measured along with comparisons to simulation. Most of the systematic uncertainties are constrained using a data-driven sample of charged-current muon neutrino events. The measurement of electron neutrinos originating from the Booster Neutrino Beam is a crucial component to understand the nature of the observed excess of low energy electromagnetic-like events at MiniBooNE.
In high energy physics experiment trigger systems, track segment seeding is a resource consuming function and the primary reason is the computing complexity of the segment finding process. As the Moore's Law is reaching its physical limit, reducing computing complexity should be carefully considered, rather than keep piling up silicon resources. The Tiny Triplet Finder is a scheme that reduces the computing complexity of the segment seeding. As a proof of concept, a 3D track segment seeding engine core based on the Tiny Triplet Finder has been implemented and tested in a low-cost FPGA device. The seeding engine is designed to preselect and group hits (stubs) from detector layers to feed subsequent track fitting stage. The seeding engine consists of a Hough transform space for r-z view and a Tiny Triplet Finder for r-phi view to implement 3D constraints. The seeding engine is organized as a pipeline so that each hit is processed in a single clock cycle. Taking advantage of the register-like storage block scheme which enables effectively resetting of a block RAM within a single clock cycle, clearing or refreshing the seeding engine takes only one clock cycles between two events. The Tiny Triplet Finder is also a generic coincidence finding scheme that can be used for many tasks. As a versatility demonstration, track segment finding performances for two distinctive detector geometries are tested in our seeding engine. In a collider barrel-layer geometry, the fake segment rates are studied for 3D (i.e., both r-phi and r-z views) and 2D (i.e., r-phi or r-z view only) configurations for high hit multiplicity events (>4000 hits/layer in the barrel region). Another detector geometry contains strip plane layers with timing information. The numbers of coincidences, both real or fake, with or without timing ("3D" or "2D") information at various hit multiplicities are studied.
The NEXT-DEMO++ detector, a high-pressure xenon gas time projection chamber serving as a prototype for the NEXT-100 experiment, was used to measure the electroluminescence (EL) yield as a function of reduced electric field ($E/p$) across pressures from 2.0 to 9.4 bar, utilizing the 41.5 keV de-excitation peak of $^{83m}$Kr. These measurements were made to examine the pressure dependence of the slope of the reduced EL yield $Y/p$, which has shown inconsistencies in the literature. The reduced yield was fitted with a linear model, revealing a modest ($\sim$5%) change in slope, beginning around 5 bar and increasing with pressure up to 9.4 bar.
Understanding neutrino-nucleus interactions is critical for conducting precise neutrino oscillation ex- periments. However, uncertainties in neutrino-nucleus cross section measurements and our incomplete understanding of nuclear effects remain a significant challenge in neutrino physics. In this paper, we investigate contributions from quantum interference between one-body and two-body interactions in charged-current quasi-elastic (CCQE) neutrino scattering amplitudes, using the ACHILLES event gen- erator. Simulations are performed using muon neutrino flux from Fermilab’s Booster Neutrino Beam (BNB), as well as Long-Baseline Neutrino Facility (LBNF) flux. We observe the neutrino flux interact- ing with Argon nuclei as detected by the Short Baseline Near Detector (SBND) and DUNE Near Detector (DUNE-ND), both Liquid Argon Time Projection Chambers (LArTPC). We focus on one muon and one proton final states with cascade interactions. We analyze multiple experimental observables including outgoing kinematic variables, energy-momentum transfer variables, and Transverse Kinematic Imbalance (TKI) variables. In this study, we also investigate the effects of PRISM (a method of sampling flux from multiple off-axis angles which creates different neutrino energy spectra). We find that the ratio of in- terference to quasi-elastic contributions gives a non-flat distribution across a 0-3.5 GeV energy range, indicating that effects of interference vary with the neutrino energy sampled. Our ultimate goal is to reduce systematic uncertainties from neutrino interactions when conducting oscillation experiments by working to disentangle the effects of quantum interference from the quasi-elastic signature.
A golden standard in science is to repeat an experiment a statistically significant number of times, recording data using the same set of detectors and the same data analysis methodology. In such case experimental error includes both the range of true values generated by repetitions of the experiment, and measurement uncertainty caused by the detector. They are independent. It is a huge and too frequently used simplification, to assume that one can measure multiple repetitions of an identical experiment, resulting in identical true experimental value. Repetitions, as similar is it is experimentally achievable result in a range of the true values rather than in a single value. When modern, very sensitive and well calibrated measurement systems are used, this range is not negligible, and sometimes dominates, in comparison to the measurement uncertainty. Range of true values depends on the physics of the experiment, while measurement uncertainty depends on the measurement method (properties of the detector not of the experiment). When data from one–of–a kind experiment are analyzed, only the measurement uncertainty is reported. It gives no information about the range, in which the true values of experiment would spread if the experiment was repeated. A frequently used approximation, that if a physical quantity is measured as a function of time, only measurement of this quantity, produces uncertainty is also in some real experiments fare to strong. Example: In reaction history time measurement uncertainty propagated to alpha dominated under certain conditions over the flux measurement uncertainty propagated to alpha. Reliability of a data point is in general independent from its measurement uncertainty. However, in practice reliable measurement methods frequently have high measurement uncertainty, while low reliability methods are applied to limit measurement uncertainty. Comparison of reliable data with high measurement uncertainty to not so reliable data measured with low uncertainty is discussed – in different scenarios different data analysis methods are applicable.
In preparation for the launch of the ICARUS -T600 far detector in the Short Baseline Neutrino program, (SBN), it is important to monitor the performance of the detector and quality of the data in real-time. Particularly important to monitor are noise levels of the TPC readout electronics, and the purity of the liquid argon in the TPC, as these can affect the overall sensitivity of the detector to detecting and reconstructing neutrino interactions.
The Electron–Ion Collider (EIC) will be a novel experimental facility to explore the properties of gluons in nucleons and nuclei, shedding light on their structure and dynamics. The EIC community outlined the physics program of the EIC in a White Paper, and the demanding detector re quirements and potential technologies to deploy at an EIC detector were published in a comprehensive Yellow Report. The general-purpose detector resulting from these efforts, ePIC, is designed to perform a broad physics program. At the same time, the wider EIC community is strongly in favor of a second detector at the EIC. Having two general-purpose collider detec tors to support the EIC science program allows us to have cross-checks and control of systematic uncertainties for potential scientific discoveries. The second detector should feature complementary technologies where possible. It can also focus on specific measurements that are less well-addressed by ePIC. The second interaction region provides potentially improved forward detector acceptance at low pT and a secondary beam focus that enables to enhance the exclusive, tagging, and diffractive physics program. Hereby, I will present the potential capabilities of the second detector and discuss studies related to its diffractive physics program.
Advanced ACTPol is the second-generation polarization-sensitive upgrade to the 6m aperture Atacama Cosmology Telescope (ACT), which increased detector count and frequency coverage compared to the previous ACTPol receiver. Advanced ACTPol utilizes a new two-stage time-division multiplexing readout architecture based on superconducting quantum interference devices to achieve a multiplexing factor as high as 64 (rows), fielding a 2012 detector camera at 150/220 GHz and two 90/150 GHz cameras containing 1716 detectors each. In a time-domain system, aliasing introduces noise to the readout. Here in this work we present a figure of merit to measure this noise contribution and present measurements of the aliased noise fraction of the Advanced ACTPol receiver as deployed.
The MiniBooNE experiment at Fermilab reports a total excess of $638.0 \pm 132.8$ electron-like events ($4.8 \sigma$) from a data sample corresponding to $18.75 \times 10^{20}$ protons-on-target in neutrino mode, which is a 46% increase in the data sample with respect to previously published results, and $11.27 \times 10^{20}$ protons-on-target in antineutrino mode. The additional statistics allow several studies to address questions on the source of the excess. First, we provide two-dimensional plots in visible energy and cosine of the angle of the outgoing lepton, which can provide valuable input to models for the event excess. Second, we test whether the excess may arise from photons that enter the detector from external events or photons exiting the detector from $\pi^0$ decays in two model independent ways. Beam timing information shows that almost all of the excess is in time with neutrinos that interact in the detector. The radius distribution shows that the excess is distributed throughout the volume, while tighter cuts on the fiducal volume increase the significance of the excess. We conclude that models of the event excess based on entering and exiting photons are disfavored.
In the particle detectors at the Large Hadron Collider, hundreds of millions of proton-proton collisions are produced every second. If one could store the whole data stream produced in these collisions, tens of terabytes of data would be written to disk every second. The general-purpose experiments ATLAS and CMS reduce this overwhelming data volume to a sustainable level, by deciding in real-time whether each collision event should be kept for further analysis or be discarded. We introduce a dataset of proton collision events that emulates a typical data stream collected by such a real-time processing system, pre-filtered by requiring the presence of at least one electron or muon. This dataset could be used to develop novel event selection strategies and assess their sensitivity to new phenomena. In particular, we intend to stimulate a community-based effort towards the design of novel algorithms for performing unsupervised new physics detection, customized to fit the bandwidth, latency and computational resource constraints of the real-time event selection system of a typical particle detector.
Following the first science results of the LUX-ZEPLIN (LZ) experiment, a dual-phase xenon time projection chamber operating from the Sanford Underground Research Facility in Lead, South Dakota, USA, we report the initial limits on a model-independent nonrelativistic effective field theory describing the complete set of possible interactions of a weakly interacting massive particle (WIMP) with a nucleon. These results utilize the same 5.5 t fiducial mass and 60 live days of exposure collected for the LZ spin-independent and spin-dependent analyses while extending the upper limit of the energy region of interest by a factor of 7.5 to 270 keV. No significant excess in this high energy region is observed. Using a profile-likelihood ratio analysis, we report 90% confidence level exclusion limits on the coupling of each individual nonrelativistic WIMP-nucleon operator for both elastic and inelastic interactions in the isoscalar and isovector bases. Published by the American Physical Society 2024
The Fission Wire Measurement System is a custom measurement system designed in the 1960s to measure the beta-particle activity of irradiated uranium-aluminum fission wires. This measurement is conducted to determine the fission rate profile of the Advanced Reactor Test Critical facility. The Advanced Test Reactor Critical facility is an open-pool, low-power test reactor used to qualify experiment configurations and verify core models prior to full-power experiment irradiations in the Advanced Test Reactor. Power distribution measurements in ATR-C use uranium-aluminum wires that are distributed throughout the core to validate simulation and modeling results. These measurements require from 340 to 1500 wires to be irradiated and measured within a 12-hour window. The system consists of 4 measurement channels and one reference channel, each with a 2-pi proportional gas flow detector and the measurement channels each have an automated sample changer. The gas flow detectors are of a custom design for this detector system that use methane gas with a large anode wire compared to modern proportional counters. These detectors, which are nearly 60 years old are irreplaceable. The measurements from these gas detectors are affected by the gas flow rate, atmospheric and line pressure, and are very sensitive to the applied high voltage. Recent improvements have been made to the control and data acquisition system, but the detectors have remained the same. The nature of the measurement of the fission product decay activity is such that the energy spectrum of the signal is changing with time. Thin, 250-um thick, plastic scintillators were commercially obtained as a potential replacement for the gas flow detectors. The original calibration of the uranium-aluminum fission wires was conducted in 1965 using a series of irradiations of gold foils and the wires in a well-characterized thermal neutron field. These measurements provided a time-dependent fission rate conversion factor from the gold foil data to calibrate the fission wires based on the response from the 2-pi proportional gas detectors. Transitioning to the new detectors requires qualification and testing. The sensitivity of the scintillators to changes in the energy spectrum of the fission wires and translation of the calibration factor have been completed. These measurements indicated that the sensitivity of the scintillators over time changes at a different rate than the sensitivity of the gas flow detectors. However, the inverse activity of measurements of both detector types is linear with time. Initial results indicate that the scintillator detectors will be a sufficient replacement for the gas detectors with minor adjustments to the fission rate conversion factor. Replacement of the detectors will improve the fission wire measurements and provide a more stable and reliable measurement system.