Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “test procedure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Testing techniques for determining static mechanical properties of Pneumatic tires

Fore-aft, lateral, and vertical spring rates of model and full-scale pneumatic tires were evaluated by testing techniques generally employed by industry and various testing groups. The purpose of this experimental program was to investigate what effects the different testing techniques have on the measured values of these important static tire mechanical properties. The testing techniques included both incremental and continuous loadings applied at various rates over half, full, and repeated cycles. Of the three properties evaluated, the fore-aft stiffness was demonstrated to be the most affected by the different testing techniques used to obtain it. Appreciable differences in the fore-aft spring rates occurred using both the increment- and continuous-loading techniques; however, the most significant effect was attributed to variations in the size of the fore-aft force loop. The dependence of lateral stiffness values on testing techniques followed the same trends as that for fore-aft stiffness, except to a lesser degree. Vertical stiffness values were found to be nearly independent of testing procedures if the nonlinear portion of the vertical force-deflection curves is avoided.

Dodge, R. N.↗
NASA NTRS1974

Ovonic switching in tin selenide thin films

Amorphous tin selenide thin films which possess Ovonic switching properties were fabricated using vacuum deposition techniques. Results obtained indicate that memory type Ovonic switching does occur in these films the energy density required for switching from a high impedance to a low impedance state is dependent on the spacing between the electrodes of the device. The switching is also function of the magnitude of the applied voltage pulse. A completely automated computer controlled testing procedure was developed which allows precise control over the shape of the applied voltage switching pulse. A survey of previous experimental and theoretical work in the area of Ovonic switching is also presented.

Baxter, C. R.↗
NASA NTRS1974

Draw forming of scale shuttle external tank dome gores

The process for manufacturing external tank dome gores is discussed. The test fixture and test procedure are described. The characteristics of the draw forming die are analyzed. The specific subjects included are: (1) forming, (2) trimming, (3) cleaning, and (4) heat treatment.

Garfield, G.↗
NASA NTRS1974

Research on the elastic stability of large shells

Tests were conducted to determine the elastic stability of large shell structures. The configuration of the shells and the instrumentation used in the measurements are described. The testing procedures are explained. Results of the stress analysis are plotted in polar graph form to show the areas of strain in micro inches at the outer surface of the skin and the inner lip of the stringer.

Horton, W. H.↗
NASA NTRS1974

Non-engine aerodynamic noise investigation of a large aircraft

A series of flyover noise measurements have been accomplished utilizing a large jet transport aircraft with engine power reduced to flight idle. It was determined that the aerodynamic (nonengine) noise levels did occur in the general range that had been predicted by using small aircraft (up to 17,690 kg gross weight) prediction techniques. The test procedures used are presented along with discussions of the effects of aerodynamic configuration on the radiated noise, identification of noise sources, and predicted aerodynamic noise as compared with measurements.

Gibson, J. S.↗
NASA NTRS1974

Evaluation of coated columbium alloy heat shields for space shuttle thermal protection system application. Volume 3, phase 3: Full size TPS evaluation

The thermal protection system (TPS), designed for incorporation with space shuttle orbiter systems, consists of one primary heat shield thermally and structurally isolated from the test fixture by eight peripheral guard panels, all encompassing an area of approximately 12 sq ft. TPS components include tee-stiffened Cb 752/R-512E heat shields, bi-metallic support posts, panel retainers, and high temperature insulation blankets. The vehicle primary structure was simulated by a titanium skin, frames, and stiffeners. Test procedures, manufacturing processes, and methods of analysis are fully documented. For Vol. 1, see N72-30948; for Vol. 2, see N74-15660.

Baer, J. W.↗
NASA NTRS1974

Testing for hydrogen environment embrittlement - Primary and secondary influences

A somewhat phenomological overview of the hydrogen embrittlement process, both internal as well as external, is presented in a effort to make more clear the type of parameters which must be considered in the selection of a test method and test procedure so that the resulting data may be meaningfully applied to real engineering structures. What are believed to be the three primary influences on the embrittlement process are considered - the original location and form of the hydrogen, the transport reactions involved in the transport of hydrogen from its origin to some point it can interact with the metal to cause embrittlement, and the embrittlement interaction itself. Additionally, a few of the large number of secondary influences on the embrittlement process are discussed, for example, the influence of impurity species in the environment, surface hydride films, and surface oxide films.

Nelson, H. G.↗
NASA NTRS1974

Centrifugal pumps for rocket engines

The use of centrifugal pumps for rocket engines is described in terms of general requirements of operational and planned systems. Hydrodynamic and mechanical design considerations and techniques and test procedures are summarized. Some of the pump development experiences, in terms of both problems and solutions, are highlighted.

Campbell, W. E.↗
NASA NTRS1974

Experimental determination of the principal moments of inertia of the Helios prototype spacecraft

The moment of inertia of the Helios Spacecraft about its spin axis was determined by use of a roll-fixture using two sets of crossed flexure pivots as elastic constraints. The test procedure entailed measurement of a system oscillation period with each of a set of added moment-of-inertia increments. The tare effect of the fixture was determined by a like process and was subtracted from the gross value to yield the spacecraft roll moment of inertia to an estimated accuracy of 0.2%. Lateral moments of inertia (i.e., about each of three axes normal to the spin axis) were determined by a gravity pendulum method that makes use of the fact that any physical pendulum has a minimum period of oscillation determined by a particular distance from the axis of rotation to the system center of gravity.

Gayman, W. H.↗
NASA NTRS1975

Heat transfer tests of a 0.0175-scale space shuttle orbiter model (29-0) to determine the effect of surface temperature on boundary layer transition at Mach 8.0 in the AEDC VKF tunnel B (test OH4A)

Wind tunnel tests were conducted to determine the heat transfer characteristics of a 0.0175-scale model of the space shuttle orbiter and to analyze the effect of wall temperature on the point of boundary layer transition. The tests were conducted at Mach 8.0 over a range of Reynolds numbers from 1.0 to 3.7 million per foot. Two regions of initial model wall temperature were investigated. Eighteen runs were obtained at each region to support the test objectives. Tabulated data are presented along with a description of the test procedure. Preliminary data indicated that the initial model wall temperature did not obviously affect the point of boundary layer transition.

Foust, J. W.↗
NASA NTRS1975

Automatic exposure control for space sequential camera

The final report for the automatic exposure control study for space sequential cameras, for the NASA Johnson Space Center is presented. The material is shown in the same sequence that the work was performed. The purpose of the automatic exposure control is to automatically control the lens iris as well as the camera shutter so that the subject is properly exposed on the film. A study of design approaches is presented. Analysis of the light range of the spectrum covered indicates that the practical range would be from approximately 20 to 6,000 foot-lamberts, or about nine f-stops. Observation of film available from space flights shows that optimum scene illumination is apparently not present in vehicle interior photography as well as in vehicle-to-vehicle situations. The evaluation test procedure for a breadboard, and the results, which provided information for the design of a brassboard are given.

Mcatee, G. E., Jr.↗
NASA NTRS1975

Signal processing and display interface studies

Signal processing equipment specifications, operating and test procedures, and systems design and engineering are described. Five subdivisions of the overall circuitry are treated: (1) the spectrum analyzer; (2) the spectrum integrator; (3) the velocity discriminator; (4) the display interface; and (5) the formatter. They function in series: (1) first in analog form to provide frequency resolution, (2) then in digital form to achieve signal to noise improvement (video integration) and frequency discrimination, and (3) finally in analog form again for the purpose of real-time display of the significant velocity data. The formatter collects binary data from various points in the processor and provides a serial output for bi-phase recording. Block diagrams are used to illustrate the system.

Source record↗
NASA NTRS1974

An evaluation of potentially useful separator materials for nickel-cadmium (Ni-Cd] satellite batteries

An evaluation intended to determine the potential suitability and probable efficacy of a group of separator materials for use in nickel-cadmium (Ni-Cd) satellite batteries was carried out. These results were obtained using test procedures established in an earlier evaluation of other separator materials, some of which were used in experimental battery cells subjected to simulated use conditions. The properties that appear to be most important are: high electrolyte absorptivity, good electrolyte retention, low specific resistivity, rapid wettability and low resistance to air permeation. Wicking characteristics and wet-out time seem to be more important with respect to the initial filling of the battery with the electrolyte.

Baker, H. A.↗
NASA NTRS1974

Linear system identification - The application of Lion's identification scheme to a third order system with noisy input-output measurements

A linear system identification technique developed by Lion is adapted for use on a third-order system with six unknown parameters and noisy input-output measurements. A digital computer is employed so that rapid identification takes place with only two state variable filters. Bias in the parameter estimates is partially eliminated by a signal-to-noise ratio testing procedure.

Brown, C. M., Jr.↗
NASA NTRS1974

Design of the Skylab MDA window

Description of the optical and structural design requirements, mechanical and thermal response analyses, final design features, and testing procedures employed in the development of a large window mounted on the earth-facing side of the multiple docking adapter (MDA) of the Skylab manned space vehicle. This window was designed for the S190 earth resources multispectral camera and was protected from the space environment during nonuse periods by a hinged cover operated from within the MDA. The camera required a viewing area approximately 43 by 58 cm. A single glass pane 4.1 cm thick was selected to minimize optical distortions. Heaters on the glass and frame were designed to control distortions caused by thermal gradients in the glass.

Trent, D. J.↗
NASA NTRS1974

Launch Vehicle Operations Simulator

The Saturn Launch Vehicle Operations Simulator (LVOS) was developed for NASA at Kennedy Space Center. LVOS simulates the Saturn launch vehicle and its ground support equipment. The simulator was intended primarily to be used as a launch crew trainer but it is also being used for test procedure and software validation. A NASA/contractor team of engineers and programmers implemented the simulator after the Apollo XI lunar landing during the low activity periods between launches.

Blackledge, J. W.↗
NASA NTRS1975

Ride-quality testing under controlled flight conditions

As part of a NASA program to develop the technology of ride quality, a flight-test program has been conducted to obtain subjective reactions of a significant number of test passengers to a variety of controlled and repeatable flight conditions. For these experiments, the computer of a variable-stability research aircraft was programmed to precisely control the aircraft's in-flight motions as specified by motion command signals prerecorded on magnetic tape. Problems initially encountered derived primarily from the quality of the motion command signals and tape playback device, plus the aircraft motion response in degrees of freedom other than that desired. Problem solutions were obtained through the use of filtering and compensating networks. The variable-stability-system modifications, problems encountered, and their solutions are described. The test procedure is described and sample results are presented which illustrate the usefulness of this technique for ride-quality research.

Schoonover, W. E., Jr.↗
NASA NTRS1976

Guidelines for multiple LSI packaging

Handbook provides specific guidelines related to ceramic multilayer circuit fabrication in terms of packaging density and interconnection methods, guiding the designer from initial stages of ceramic multilayer interconnection and artwork generation through test pattern utilization, assembly operations, and final inspection and test procedures.

Peckinpaugh, C. J.↗