SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Here, the solid electrolyte interphase (SEI) layer on a silicon anode is investigated by SERS. Gold electrodeposition on a silicon electrode is confirmed by SEM, and Raman enhancement is proved, allowing determination of the partial composition of its SEI. For the first time, organophosphate-derivatives seem to be detected by Raman.
The application of Electrospray and Electrosonic Spray Ionization Mass Spectrometry (ESI-MS and ESSI-MS) to study accelerated reaction kinetics in droplets is examined using numerical models, new experimental data, and prior literature.
Many recent studies have highlighted the timescale for stress relaxation of biomaterials on the microscale as an important factor in regulating a number of cell-material interactions, including cell spreading, proliferation, and differentiation. Relevant timescales on the order of 0.1–100 s have been suggested by several studies. While such timescales are accessible through conventional mechanical rheology, several biomaterials have heterogeneous structures, and stress relaxation mechanisms of the bulk material may not correspond to that experienced in the cellular microenvironment. Here we employ X-ray photon correlation spectroscopy (XPCS) to explore the temperature-dependent dynamics, relaxation time, and microrheology of multicomponent hydrogels comprising of commercial poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) triblock copolymer F127 and alginate. Previous studies on this system have shown thermoreversible behavior in the bulk oscillatory shear rheology. At physiological temperatures, bulk rheology of these samples shows behavior characteristic of a soft solid, with G' > G" and no crossover between G' and G" over the measurable frequency range, indicating a relaxation time >125 s. By contrast, XPCS-based microrheology shows viscoelastic behavior at low frequencies, and XPCS-derived correlation functions show relaxation times ranging from 10–45 s on smaller length scales. Finally, we are able to use XPCS to effectively probe the viscoelasticity and relaxation behavior within the material microenvironments.
Energy and environmental issues have attracted increasing attention globally, where sustainability and low-carbon emissions are seriously considered and widely accepted by government officials. In response to this situation, the development of renewable energy and environmental technologies is urgently needed to complement the usage of traditional fossil fuels. While a big part of advancement in these technologies relies on materials innovations, new materials discovery is limited by sluggish conventional materials synthesis methods, greatly hindering the advancement of related technologies. To address this issue, this review introduces and comprehensively summarizes emerging ultrafast materials synthesis methods that could synthesize materials in times as short as nanoseconds, significantly improving research efficiency. We discuss the unique advantages of these methods, followed by how they benefit individual applications for renewable energy and the environment. We also highlight the scalability of ultrafast manufacturing towards their potential industrial utilization. Finally, we provide our perspectives on challenges and opportunities for the future development of ultrafast synthesis and manufacturing technologies. Here, we anticipate that fertile opportunities exist not only for energy and the environment but also for many other applications.
Coal combustion byproducts are known to be enriched in arsenic (As) and selenium (Se). This enrichment is a concern during the handling, disposal, and reuse of the ash as both elements can be harmful to wildlife and humans if mobilized into water and soils. The leaching potential and bioaccessibility of As and Se in coal fly ash depends on the chemical forms of these elements and their association with the large variety of particles that comprise coal fly ash. The overall goal of this research was to determine nanoscale and microscale solid phase mineral associations and oxidation states of As and Se in fly ash. We utilized nanoscale 2D imaging (30–50 nm spot size) with the Hard X-ray Nanoprobe (HXN) in combination with microprobe X-ray capabilities (~5 μm resolution) to determine the As and Se elemental associations. Speciation of As and Se was also measured at the nano- to microscale with X-ray absorption spectroscopy. The enhanced resolution of HXN showed As and Se as either diffusely located around or comingled with Ca- and Fe-rich particles. The results also showed nanoparticles of Se attached to the surface of fly ash grains. Overall, a comparison of As and Se species across scales highlights the heterogeneity and complexity of chemical associations for these trace elements of concern in coal fly ash.
This perspective focuses on electrokinetic methods for separating the smallest microplastics (<10 μm) on the basis of charge. Advantages, limitations, and future research opportunities regarding electrokinetic separation methods are discussed.
A series of medium- and long-chain zinc carboxylates (zinc octanoate, zinc nonanoate, zinc decanoate, zinc undecanoate, zinc dodecanoate, zinc pivalate, zinc stearate, zinc palmitate, zinc oleate, and zinc azelate) was analyzed by ultra-high-field 67 Zn NMR spectroscopy up to 35.2 T, as well as 13 C NMR and FTIR spectroscopy. We also report the single-crystal X-ray diffraction structures of zinc nonanoate, zinc decanoate, and zinc oleate—the first long-chain carboxylate single-crystals to be reported for zinc. The NMR and X-ray diffraction data suggest that the carboxylates exist in three distinct geometric groups, based on structural and spectroscopic parameters. The ssNMR results presented here present a future for dynamic nuclear polarization (DNP)-NMR-based minimally invasive methods for testing artwork for the presence of zinc carboxylates.
Exploring the dynamic interaction of non-thermal plasma (NTP) with catalytic processes is critical to unravelling elusive catalyst structure–function relationships under NTP conditions, specifically dielectric barrier discharges (DBD).
van der Waals two-dimensional materials and heterostructures combined with polymer films continue to attract research attention to elucidate their functionality and potential applications. This study presents the fabrication and mechanical testing of 2D material heterostacks, consisting of few-layer boron nitride and graphene heterostructures synthesized via chemical vapor deposition, capped with a polymethyl methacrylate layer and suspended across ∼200 μm wide trenches using a combined wet–dry transfer method. The mechanical characterization of the heterostacks was performed using two independent approaches: (a) non-local testing with a custom-built tensile testing platform and (b) local load–displacement testing employing atomic force microscopy probes, complemented by finite element simulations. Both approaches provided new results, which are in good agreement with each other. Overall, our findings offer new insights into a combined load capacity in complex multi-material two-dimensional systems, and can contribute to advancing micro and nano-scale device designs and implementations.
Abstract Fast and accurate fault location in DC power systems is of particular importance to ensure their reliable operation. One of the approaches for implementing a fast‐tripping protection scheme is to use Traveling waves (TW) initiated by a fault scenario. This paper proposes a physics‐informed machine learning approach that utilizes TWs for fault location in DC microgrids. TWs are extracted by the so‐called multiresolution analysis which identifies the TW's wavelet coefficients for multiple frequency ranges. This paper deploys Parseval's theorem to find the energy of wavelet coefficients as a quantitative metric for describing TWs. The hypothesis of this paper is that once the Parseval energy curves for a specific cable are extracted, they can be utilized to locate faults along with that cable regardless of the DC system in which the cable is deployed. The fault location algorithm uses Parseval energy curves to train a Gaussian Process (GP) estimator. With the Parseval energy values of measured current at the protection device location, the GP estimator is able to estimate fault locations with high accuracy. The effectiveness of the proposed algorithm is verified by simulating a DC microgrid system in PSCAD/EMTDC.
We present the porting to heterogeneous architectures of the algorithm used for applying linear transformations of raw energy deposits in the CMS High Granularity Calorimeter (HGCAL). This is the first heterogeneous algorithm to be fully integrated with HGCAL’s reconstruction chain. After introducing the latter and giving a brief description of the structural components of HGCAL relevant for this work, the role of the linear transformations in the calibration is reviewed. The many ways in which parallelization is achieved are described, and the successful validation of the heterogeneous algorithm is covered. Detailed performance measurements are presented, including throughput and execution time for both CPU and GPU algorithms, therefore establishing the corresponding speedup. We finally discuss the interplay between this work and the porting of other algorithms in the existing reconstruction chain, as well as integrating algorithms previously ported but not yet integrated.
The formation of nuclei in slightly proton-rich regions of the neutrino-driven wind of core-collapse supernovae could be attributed to the neutrino-p process (νp-process). As it proceeds via a sequence of (p,γ) and (n,p) reactions, it may produce elements in the range of Ni and Sn, considering adequate conditions. Recent studies identify a number of decisive (n,p) reactions that control the efficiency of the νp-process. The study of one such (n,p) reaction via the measurement of the reverse (p,n) in inverse kinematics was performed with SECAR at NSCL/FRIB. Proton-induced reaction measurements, especially at the mass region of interest, are notably difficult since the recoils have nearly identical masses as the unreacted projectiles. Such measurements are feasible with the adequate separation level achieved with SECAR, and the in-coincidence neutron detection. Adjustments of the SECAR system for the first (p,n) reaction measurement included the development of new ion beam optics, and the installation of the neutron detection system. The aforementioned developments along with a discussion on the preliminary results of the p(58Fe,n)58Co reaction measurement are presented.
Despite its availability as a solid bead or ingot, non-isotopic thallium metal is no longer commercially produced as a foil because of its high toxicity. To conduct fundamental studies on the material, the Stable Isotope Materials and Chemistry Group (SIMC) at Oak Ridge National Laboratory (ORNL) was approached to develop a safe method to process thallium and produce 40 non-isotopic thallium foils. The commercially sourced metal was consolidated into an ingot by melting the material in a special tube furnace under a reducing atmosphere. The resulting ingot was cold rolled using a work-hardened, stainless-steel pack and oil lubricant before cutting the final foils to 2.5 × 2.5 cm2 area and thickness of 50–75 mg/cm2. The appropriate safeguards used at each step are outlined to ensure the safe and consistent production of high-quality foils. The low-loss process enables future requests for isotopic thallium and other hazardous and rare materials.
Here, this study examines the application of the recently developed next-generation intensity-duration-frequency (NG-IDF) curves in hydrological design, focusing on a small snow-dominated basin in Washington state. Four methods are used to assess the NG-IDF performance: (1) basin outlet flood frequency analysis, (2) use of standard precipitation-based intensity-duration-frequency (PREC-IDF) curves following surface water design manuals typically used in the basin, (3) utilization of locally constructed PREC-IDF curves, and (4) use of locally constructed NG-IDF curves. The standard PREC-IDF design method assumes precipitation as rainfall and neglecting snowmelt or rain-on-snow (ROS) events that can lead to significant flood underestimations in the test basin. In contrast, the NG-IDF method incorporates snow processes and shows promising improvements in accurately estimating design floods. The validation analysis demonstrates the superiority of NG-IDF over standard and local PREC-IDF in this test basin. The study highlights the necessity for adjustments in current design manuals to ensure sufficient flood protection, particularly in light of the planned substantial investments in US infrastructure.
Complex high-precision mechanical devices can be fabricated using 3-dimensional printing technology with the help of computer-aided design. Using 3D stereolithography, we have constructed a cryogenic goniometer for measurements in pulsed magnetic fields of up to 100 T, at temperatures as low as 0.5 K. We review the properties of several materials tested in developing the goniometer and report on its design and performance. The goniometer allows samples to be rotated in situ to a precision of 0.2 deg, so that the field can be applied at many different angles to the samples’ symmetry directions. Following its success, we establish that 3D printing is now a viable technology for pulsed-field and other cryogenic probes.
An up-to-date overview of the CFOUR program system is given. After providing a brief outline of the evolution of the program since its inception in 1989, a comprehensive presentation is given of its well-known capabilities for high-level coupled-cluster theory and its application to molecular properties. Subsequent to this generally well-known background information, much of the remaining content focuses on lesser-known capabilities of CFOUR, most of which have become available to the public only recently or will become available in the near future. Each of these new features is illustrated by a representative example, with additional discussion targeted to educating users as to classes of applications that are now enabled by these capabilities. Lastly, some speculation about future directions is given, and the mode of distribution and support for CFOUR are outlined in the appendix.
In this paper, we discuss extending the sub-system embedding sub-algebra coupled cluster (SES-CC) formalism and the double unitary coupled cluster (DUCC) ansatz to the time domain. As we demonstrated in earlier studies, it is possible, using these formalisms, to calculate the energy of the entire system as an eigenvalue of downfolded/effective Hamiltonian in the active space, that is identifiable with the sub-system of the composite system. In these studies, we demonstrated that downfolded Hamiltonians integrate out Fermionic degrees of freedom that do not correspond to the physics encapsulated by the active space. We extend these results to the time-dependent Schrödinger equation, showing that a similar construct is possible to partition a system into a sub-system that varies slowly in time and a remaining subsystem that corresponds to fast oscillations. This time dependent formalism allows coupled cluster quantum dynamics to be extended to larger systems and for the formulation of novel quantum algorithms based on the quantum Lanczos approach, which have recently been considered in the literature.