Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “system code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Prediction and Enhancement of Thermal Protection Systems from Meteoroid Damage using a Smooth Particle Hydrodynamic Code

Interplanetary spacecraft are exposed to meteoroid fluxes that range in speeds from 10 to 72 km/sec, far above the capability of today’s test facilities to provide predictions for the likelihood of spacecraft critical penetration. Of special interest are sample return missions, which (though protected by shielding) must often survive years of exposure to the meteoroid environment in order to re-enter Earth’s atmosphere with their scientific cargo. This paper describes the simulation of meteoric material damage to thermal protection systems (TPS) housed beneath protective “garage” (shielding) enclosures using the Smooth Particle Hydrodynamics Code (SPHC) operated by the Institute for Defense Analyses and Stellingwerf Consulting in support of ongoing NASA tasks. The study outlined in this paper considered the impact effect of both meteoric materials such as iron, ice, and chondrites (dunnite), and non-meteoric materials such as aluminum and nylon against both external shielding materials (single and dual aluminum bumpers) and Heat shield for Extreme Entry Environments Technology (HEEET) TPS materials, used alone and in conjunction with shielding. A general predictive damage equation to HEEET TPS is developed from these SPHC simulations for velocities up to 70 km/sec.

Hypervelocity Impact, hydrocode, meteoroid and orb↗
NASA NTRS1990

Code For Analysis Of Wing-And-Flap Systems

SUBAERF2 program developed to provide for analysis of subsonic aerodynamics and design by iteration of low-speed wing/flap systems. Based on linearized-theory lifting-surface solution but also accounts for some nonlinear characteristics. Effects of leading- and trailing-edge flaps included. New and improved version of programs described in LAR-13116 and LAR-12987, and replaces both of them. Written in FORTRAN V.

Darden, Christine M.↗
NASA NTRS1998

A 2-D Interface Element for Coupled Analysis of Independently Modeled 3-D Finite Element Subdomains

Over the past few years, the development of the interface technology has provided an analysis framework for embedding detailed finite element models within finite element models which are less refined. This development has enabled the use of cascading substructure domains without the constraint of coincident nodes along substructure boundaries. The approach used for the interface element is based on an alternate variational principle often used in deriving hybrid finite elements. The resulting system of equations exhibits a high degree of sparsity but gives rise to a non-positive definite system which causes difficulties with many of the equation solvers in general-purpose finite element codes. Hence the global system of equations is generally solved using, a decomposition procedure with pivoting. The research reported to-date for the interface element includes the one-dimensional line interface element and two-dimensional surface interface element. Several large-scale simulations, including geometrically nonlinear problems, have been reported using the one-dimensional interface element technology; however, only limited applications are available for the surface interface element. In the applications reported to-date, the geometry of the interfaced domains exactly match each other even though the spatial discretization within each domain may be different. As such, the spatial modeling of each domain, the interface elements and the assembled system is still laborious. The present research is focused on developing a rapid modeling procedure based on a parametric interface representation of independently defined subdomains which are also independently discretized.

Kandil, Osama A.↗
NASA NTRS1994

CLIPS template system for program understanding

Program understanding is a subfield of software reengineering and attempts to recognize the run-time behavior of source code. To this point, success in this area has been limited to very small code segments. An expert system, HLAR (High-Level Algorithm Recognizer), has been written in CLIPS and recognizes three sorting algorithms, selection sort, quicksort, and heapsort. This paper describes the HLAR system in general and, in depth, the CLIPS templates used for program representation and understanding.

Finkbine, Ronald B.↗
NASA NTRS1985

A VLSI single chip (255,223) Reed-Solomon encoder

A description of a working single chip implementation of a Reed-Solomon encoder. The code used is the Consultative Committee on Space Data Systems (CCSDS) standard (255,223) code. The architecture that leads to this single very large scale integration chip design makes use of a bit-serial finite field multiplication algorithm of E. R. Berlekamp.

Deutsch, L. J.↗
NASA NTRS1989

Computational fluid dynamics at the Lewis Research Center: An overview

Lewis is a multidisciplinary Center with strong research and development programs in aeronautical and space propulsion, power, space communications, space experiments and materials. Computational fluid dynamics (CFD) is playing an important and growing role in most of these areas. Described here is how CFD is integrated into these programs and highlights elements of the CFD activities. Examples are presented of codes developed to predict flow fields in advanced propulsion systems and several of the code validation experiments are described. The CFD effort at Lewis ranges from basic research on new and improved algorithms through code development to the application of these codes to specific engineering problems. Because of the substantial improvement in CFD's predictive capability, its use at Lewis is on a steep growth path, spreading rapidly into new areas which had not traditionally taken advantage of the techniques of numerical simulation. Multidisciplinary codes and the future direction of CFD at Lewis are discussed.

Stubbs, Robert M.↗
NASA NTRS1994

Summary report of mission acceleration measurements for Spacehab-01, STS-57 launched 21 June 1993

The maiden voyage of the commercial Spacehab laboratory module onboard the STS-57 mission was integrated with several accelerometer packages, one of which was the Space Acceleration Measurement System (SAMS). The June 21st 1993, launch was the seventh successful mission for the Office of Life and Microgravity Sciences and Application's (OLMSA) SAMS unit. This flight was also complemented by a second accelerometer system. The Three Dimensional Microgravity Accelerometer (3-DMA), a Code C funded acceleration measurement system, offering an on-orbit residual calibration as a reference for the unit's four triaxial accelerometers. The SAMS accelerometer unit utilized three remote triaxial sensor heads mounted on the forward Spacehab module bulkhead and on one centrally located experiment locker door. These triaxial heads had filter cut-offs set to 5, 50, and 1000 Hz. The mission also included other experiment specific accelerometer packages in various locations.

Finley, Brian↗
NASA NTRS1978

Potential digitization/compression techniques for Shuttle video

The Space Shuttle initially will be using a field-sequential color television system but it is possible that an NTSC color TV system may be used for future missions. In addition to downlink color TV transmission via analog FM links, the Shuttle will use a high resolution slow-scan monochrome system for uplink transmission of text and graphics information. This paper discusses the characteristics of the Shuttle video systems, and evaluates digitization and/or bandwidth compression techniques for the various links. The more attractive techniques for the downlink video are based on a two-dimensional DPCM encoder that utilizes temporal and spectral as well as the spatial correlation of the color TV imagery. An appropriate technique for distortion-free coding of the uplink system utilizes two-dimensional HCK codes.

Habibi, A.↗
NASA NTRS1998

Fault-tolerant computation with higher-dimensional systems

Instead of a quantum computer where the fundamental units are 2-dimensional qubits, the author considers a quantum computer made up of d-dimensional systems. There is a straightforward generalization of the class of stabilizer codes to d-dimensional systems, and he discusses the theory of fault-tolerant computation using such codes. He proves that universal fault-tolerant computation is possible with any higher-dimensional stabilizer code for prime d.

CORRECTIONS↗
NASA NTRS1971

ERTS direct readout ground station study

A system configuration which provides for a wide variety of user requirements is described. Two distinct user types are considered and optimized configurations are provided. Independent satellite transmission systems allow simultaneous signal transmission to Regional Collection Centers via a high data rate channel and to local users who require near real time consumption of lower rate data. In order to maximize the ultimate utility of this study effort, a parametric system description is given such that in essence a shopping list is provided. To achieve these results, it was necessary to consider all technical disciplines associated with high resolution satellite imaging systems including signal processing, modulation and coding, recording, and display techniques. A total systems study was performed.

Source record↗
NASA NTRS1977

Survey of adaptive image coding techniques

The general problem of image data compression is discussed briefly with attention given to the use of Karhunen-Loeve transforms, suboptimal systems, and block quantization. A survey is then conducted encompassing the four categories of adaptive systems: (1) adaptive transform coding (adaptive sampling, adaptive quantization, etc.), (2) adaptive predictive coding (adaptive delta modulation, adaptive DPCM encoding, etc.), (3) adaptive cluster coding (blob algorithms and the multispectral cluster coding technique), and (4) adaptive entropy coding.

Habibi, A.↗
NASA NTRS1983

Modeling a Li/SOCl2 battery for design purposes

A generalized code applicable to many different electrochemical systems and geometric designs is discussed. The code is to be set up so that physical property data such as thermal conductivity, viscosity, density, and configuration (e.g. physical dimensions) are the input data. Thus, by changing these parameters many different battery configurations can be handled. The outputs, as a function of time and space, are voltage, current, temperature, pressure, velocity, and species concentration.

Ernst, D. W.↗
NASA NTRS1985

An investigation of vortex-induced aerodynamic characteristics of supersonic cruise configurations

The linear lifting surface theory which predicts the life in supersonic flow, even though the drag is usually underpredicted, is described. A method for calculating the nonlinear wave drag was developed to remedy this deficiency. The calculated sectional drag is modified by adding the difference between the exact two dimensional (2-D) and the linear 2-D wave drag at the calculated sectional lift coefficient. Improvement in the supersonic drag prediction is shown. The VORCAM code was modified for the FORTRAN 77 language and its input stream was rearranged. The Boeing code was adapted to the computer system. All CDC special features in the code are replaced with standard FORTRAN algorithms. It is suggested that because of the nonlinearity the solution appears to be nonunique crowding of two vortices, a mechanism of vortex asymmetry, is investigated.

Lan, C. E.↗
NASA NTRS1984

Viscous transonic flow computation over Space Shuttle configuration

A thin-layer Navier-Stokes code capable of predicting steady-state viscous flows is applied to the transonic flow over a Space Shuttle configuration. The code is written in the generalized coordinate system, and the grid-generation code of Fujii (1983) is used for the discretization of the flow field. The flow-field computation is done using the CRAY 1S computer at NASA Ames. The computed result is physically reasonable, even though no experimental data is available for the comparison purpose.

Fujii, K.↗
NASA NTRS1995

Multimedia Information eXchange for I-NET, Inc. at the Kennedy Space Center: A continuing study of the application of worldwideweb technology

Multimedia Information eXchange (MIX) is a multimedia information system that accommodates multiple data types and provides consistency across platforms. Information from all over the world can be accessed quickly and efficiently with the Internet-based system. I-NET's MIX uses the World Wide Web and Mosaic graphical user interface. Mosaic is available on all platforms used at I-NET's Kennedy Space Center (KSC) facilities. Key information system design concepts and benefits are reviewed. The MIX system also defines specific configuration and helper application parameters to ensure consistent operations across the entire organization. Guidelines and procedures for other areas of importance in information systems design are also addressed. Areas include: code of ethics, content, copyright, security, system administration, and support.

Metcalf, David↗
NASA NTRS1987

Expert systems built by the Expert: An evaluation of OPS5

Two expert systems were written in OPS5 by the expert, a Ph.D. astronomer with no prior experience in artificial intelligence or expert systems, without the use of a knowledge engineer. The first system was built from scratch and uses 146 rules to check for duplication of scientific information within a pool of prospective observations. The second system was grafted onto another expert system and uses 149 additional rules to estimate the spacecraft and ground resources consumed by a set of prospective observations. The small vocabulary, the IF this occurs THEN do that logical structure of OPS5, and the ability to follow program execution allowed the expert to design and implement these systems with only the data structures and rules of another OPS5 system as an example. The modularity of the rules in OPS5 allowed the second system to modify the rulebase of the system onto which it was grafted without changing the code or the operation of that system. These experiences show that experts are able to develop their own expert systems due to the ease of programming and code reusability in OPS5.

Jackson, Robert↗
NASA NTRS2009

LDPC-PPM Coding Scheme for Optical Communication

In a proposed coding-and-modulation/demodulation-and-decoding scheme for a free-space optical communication system, an error-correcting code of the low-density parity-check (LDPC) type would be concatenated with a modulation code that consists of a mapping of bits to pulse-position-modulation (PPM) symbols. Hence, the scheme is denoted LDPC-PPM. This scheme could be considered a competitor of a related prior scheme in which an outer convolutional error-correcting code is concatenated with an interleaving operation, a bit-accumulation operation, and a PPM inner code. Both the prior and present schemes can be characterized as serially concatenated pulse-position modulation (SCPPM) coding schemes. Figure 1 represents a free-space optical communication system based on either the present LDPC-PPM scheme or the prior SCPPM scheme. At the transmitting terminal, the original data (u) are processed by an encoder into blocks of bits (a), and the encoded data are mapped to PPM of an optical signal (c). For the purpose of design and analysis, the optical channel in which the PPM signal propagates is modeled as a Poisson point process. At the receiving terminal, the arriving optical signal (y) is demodulated to obtain an estimate (a^) of the coded data, which is then processed by a decoder to obtain an estimate (u^) of the original data.

Barsoum, Maged↗