Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stellarators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

Optimized finite-build stellarator coils using automatic differentiation

A new stellarator coil design code is introduced that optimizes the position and winding pack orientation of finite-build coils. The new code, called flexible optimized curves in space using automatic differentiation (AD) and finite build (FOCUSADD), performs gradient-based optimization in a high-dimensional, non-convex space. The derivatives with respect to parameters of finite-build coils are easily and efficiently computed using AD. FOCUSADD parametrizes coil positions in free space using a Fourier series and uses a multi-filament approximation to the coil winding pack. The orientation of the winding pack is parametrized with a Fourier series and can be optimized as well. Optimized finite-build coils for a Wendelstein 7-X (W7-X)-like stellarator are found, and compared with filamentary coil results. The final positions of optimized finite-build W7-X-like coils are shifted, on average, by approximately 2.5 mm relative to optimized filamentary coils. These results suggest that finite-build effects should be accounted for in the optimization of stellarators with low coil tolerances.

43 PARTICLE ACCELERATORS↗

Study of plasma confinement in the L-2M stellarator during the formation of an edge transport barrier

A plasma confinement mode characterized by the formation of an edge transport barrier (ETB) was discovered in the L-2M stellarator after boronization of the vacuum vessel wall. The transition into this mode is accompanied by a jump in the electron temperature by 100-200 eV at the plasma edge and a sharp increase in the gradient of the electron temperature T{sub e} in this region. The threshold power for the transition into the ETB confinement mode with an increased electron temperature gradient is P{sub thr}{sup {nabla}Te} = (60 {+-} 15)n{sub e} [10{sup 19} m{sup -3}] kW. The formation of the ETB manifests itself also in a substantial change in the electron density profile. A density peak with a steep gradient at the outer side forms at the plasma edge. The threshold power for the transition into the ETB confinement mode corresponding to a substantial increase in the plasma density gradient near r = a is P{sub thr}{sup {nabla}Te} = (67 {+-} 9)n{sub e} [10{sup 19} m{sup -3}] kW, which agrees to within experimental error with the threshold power for the transition into the ETB confinement mode determined from the sharp increase in the gradient of the electron temperature T{sub e}. The value of P{sub thr} for the L-2M stellarator agrees to within 25% with that obtained from the tokamak scaling. In the ETB confinement mode, the plasma energy W and the energy confinement time {tau}{sub E} determined from diamagnetic measurements increase by 20-30% as compared to those obtained from the stellarator scaling for the confinement mode without an ETB. When the heating power increases by a factor of 2-3 above the threshold value, the effects related to improved energy confinement disappear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Overview of stellar nucleosynthesis in explosive environments and recent experimental highlights

Explosive stellar environments such as neutron star mergers, supernovae and X-ray bursts contribute significantly to the synthesis of many chemical elements known in the universe. Understanding the underlying explosion mechanisms and stellar conditions, as well as the observed signatures of chemical elements at a variety of these sites require a considerable effort from the nuclear physics community. An overview of several explosive stellar environments have been summarized, along with brief highlights of recent experimental efforts to better constrain the nucleosynthesis from these environments using recent advances of rare isotope beam facilities and measurement techniques.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Contribution of Gaia Sausage to the Galactic Stellar Halo Revealed by K Giants and Blue Horizontal Branch Stars from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope, Sloan Digital Sky Survey, and Gaia

We explore the contribution of the Gaia Sausage to the stellar halo of the Milky Way by making use of a Gaussian mixture model (GMM) and applying it to halo star samples of Large Sky Area Multi-Object Fiber Spectroscopic Telescope K giants, Sloan Extension for Galactic Understanding and Exploration K giants, and Sloan Digital Sky Survey blue horizontal branch stars. The GMM divides the stellar halo into two parts, of which one represents a more metal-rich and highly radially biased component associated with an ancient, head-on collision referred to as the Gaia Sausage, and the other one is a more metal-poor and isotropic halo. A symmetric bimodal Gaussian is used to describe the distribution of spherical velocity of the Gaia Sausage, and we find that the mean absolute radial velocity of the two lobes decreases with the Galactocentric radius. We find that the Gaia Sausage contributes about 41%–74% of the inner (Galactocentric radius r gc < 30 kpc) stellar halo. The fraction of stars of the Gaia Sausage starts to decline beyond r gc ~ 25–30 kpc, and the outer halo is found to be significantly less influenced by the Gaia Sausage than the inner halo. After the removal of halo substructures found by integrals of motion, the contribution of the Gaia Sausage falls slightly within r gc ~ 25 kpc but is still as high as 30%–63%. Finally, we select several possible Sausage-related substructures consisting of stars on highly eccentric orbits. The GMM/Sausage component agrees well with the selected substructure stars in their chemodynamical properties, which increases our confidence in the reliability of the GMM fits.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of Sodium Abundance Ratio from Low-resolution Stellar Spectra and Its Applications

We present a method to determine sodium abundance ratios ([Na/Fe]) using the Na i D doublet lines in low-resolution (R ~ 2000) stellar spectra. As stellar Na i D lines are blended with those produced by the interstellar medium, we developed a technique for removing the interstellar Na I D lines using the relationship between extinction, which is proportional to E(B – V), and the equivalent width of the interstellar Na i D absorption lines. When measuring [Na/Fe], we also considered corrections for nonlocal thermodynamic equilibrium (NLTE) effects. Comparisons with data from high-resolution spectroscopic surveys suggest that the expected precision of [Na/Fe] from low-resolution spectra is better than 0.3 dex for stars with [Fe/H] > –3.0. We also present a simple application employing the estimated [Na/Fe] values for a large number of stellar spectra from the Sloan Digital Sky Survey (SDSS). After classifying the SDSS stars into Na-normal, Na-high, and Na-extreme, we explore their relation to stars in Galactic globular clusters (GCs). We find that while the Na-high SDSS stars exhibit a similar metallicity distribution function (MDF) to that of the GCs, indicating that the majority of such stars may have originated from GC debris, the MDF of the Na-normal SDSS stars follows that of typical disk and halo stars. As there is a high fraction of carbon-enhanced metal-poor stars among the Na-extreme stars, they may have a non-GC origin, perhaps due to mass-transfer events from evolved binary companions.

79 ASTRONOMY AND ASTROPHYSICS↗

A Swing of the Pendulum: The Chemodynamics of the Local Stellar Halo Indicate Contributions from Several Radial Merger Events

We find that the chemical abundances and dynamics of APOGEE and GALAH stars in the local stellar halo are inconsistent with a scenario in which the inner halo is primarily composed of debris from a single massive, ancient merger event, as has been proposed to explain the Gaia-Enceladus/Gaia Sausage (GSE) structure. The data contain trends of chemical composition with energy that are opposite to expectations for a single massive, ancient merger event, and multiple chemical evolution paths with distinct dynamics are present. We use a Bayesian Gaussian mixture model regression algorithm to characterize the local stellar halo, and find that the data are fit best by a model with four components. We interpret these components as the Virgo Radial Merger (VRM), Cronus, Nereus, and Thamnos; however, Nereus and Thamnos likely represent more than one accretion event because the chemical abundance distributions of their member stars contain many peaks. Although the Cronus and Thamnos components have different dynamics, their chemical abundances suggest they may be related. We show that the distinct low- and high-α halo populations from Nissen & Schuster are explained by VRM and Cronus stars, as well as some in situ stars. Because the local stellar halo contains multiple substructures, different popular methods of selecting GSE stars will actually select different mixtures of these substructures, which may change the apparent chemodynamic properties of the selected stars. We also find that the Splash stars in the Solar region are shifted to higher v $\phi$ and slightly lower [Fe/H] than previously reported.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmological Simulations of Stellar Halos with Gaia Sausage–Enceladus Analogs: Two Sausages, One Bun?

Observations of the Milky Way’s stellar halo find that it is predominantly comprised of a radially biased population of stars, dubbed the Gaia Sausage–Enceladus, or GSE. These stars are thought to be debris from dwarf galaxy accretion early in the Milky Way’s history. Though typically considered to be from a single merger, it is possible that the GSE debris has multiple sources. To investigate this possibility, we use the IllustrisTNG50 simulation to identify stellar accretion histories in 98 Milky Way analogs—the largest sample for which such an identification has been performed—and find GSE-like debris in 32, with two-merger GSEs accounting for a third of these cases. Distinguishing single-merger GSEs from two-merger GSEs is difficult in common kinematic spaces, but differences are more evident through chemical abundances and star formation histories. This is because single-merger GSEs are typically accreted more recently than the galaxies in two-merger GSEs: the median infall times (with 16th and 84th percentiles) are $5.{9}_{-2.0}^{+3.3}$ and $10.{7}_{-3.7}^{+1.2}$ Gyr ago for single- and two-merger scenarios, respectively. The systematic shifts in abundances and ages that occur as a result suggest that efforts in modeling these aspects of the stellar halo prove ever-important in understanding its assembly.

galactic archaeology↗

Lithium Divertor Targets and Walls for the ASTER Liquid Stellarator Reactor, Distributed Divertor

Stellarators may have advantages for certain liquid metal options as Plasma Facing Components (PFC) for divertor targets and first walls due to the wide range of possible magnetic configurations, which additionally are free of disruptions and fast field variations. In a previous work (V. Queral et al., IEEE Trans. Plasma Sci. 52, 2024), a concept of stellarator reactor (ASTER-CP) based on swirling Li-molten salts and liquid lithium floating on the molten salt as PFC was presented. The divertor matters were not studied then and, thus, they are being studied and experimentally tested now. The ASTER-CP reactor concept, the initial liquid metal experiments and potential concepts for the ASTER-CP divertor and first wall are reported. Concerning the experiments, several small scale experiments of galinstan in a small rotating cylinder under magnetic field have been produced, including one experiment with high viscosity galinstan-mixture for increased thickness of layer. An experiment of floating lithium on the molten salt LiCl-PbCl2 gave fast volatilization/decomposition of the molten salt. Particularly for divertors, the traditional free-flow, Capillary Porous Systems and ‘divertorlets’ have been studied for application to ASTER-CP. Surface waves (hot spots), lack of enough surface fluid turbulence and excessive fluid speed are the main issues found in fast free-flow. The perhaps original concept of Distributed Divertor and Equi-power Surface is tentatively proposed and studied, taking advantage of stellarator fields and low recycling regime.

distributed divertor↗

Momentum correction techniques for neoclassical transport in stellarators

In the traditional neoclassical ordering for stellarators, monoenergetic transport coefficients are evaluated using the simplified Lorentz form of the pitch-angle collision operator which violates momentum conservation. In this paper, the parallel momentum balance with radial parallel momentum transport and viscosity terms is analyzed, in particular, with respect to the radial electric field. Next, the impact of momentum conservation in the stellarator long-mean-free-path regime is estimated for the radial transport and the parallel electric conductivity. Two different momentum correction techniques are described based on monoenergetic transport coefficients calculated by the DKES code [W. I. van Rij and S. P. Hirshman, Phys. Fluids B 1, 563 (1989)]. The benchmarking of the parallel electric conductivity and of the bootstrap current is presented for a tokamak as well as for two W7-X stellarator configurations [G. Grieger et al., Phys. Fluids B 4, 2081 (1992)]. Finally, the impact of the momentum correction on the expected total bootstrap current is briefly analyzed for two W7-X scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pfirsch-Schlueter impurity transport in stellarators

The Pfirsch-Schlueter transport of impurities is calculated for stellarator geometry. Contrary to the tokamak case, where the only contribution to the particle flux arises from friction between different species, in a stellarator there is another source of impurity transport due to pressure anisotropy. However, the pressure anisotropy term is usually smaller than the friction term, so that the impurity particle flux is comparable to that in a tokamak. The pressure anisotropy is nonetheless important as it causes the transport to be nonambipolar and thereby determines the radial electric field. The presence of impurities therefore affects the radial electric field in a stellarator. The heat flux is also affected qualitatively by impurities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional equilibria and transport in RFX-mod: A description using stellarator tools

RFX-mod self-organized single helical axis (SHAx) states provide a unique opportunity to advance 3D fusion physics and establish a common knowledge basis in a parameter region not covered by stellarators and tokamaks. The VMEC code has been adapted to the reversed-field pinch (RFP) to model SHAx equilibria in fixed boundary mode with experimental measurements as constraint. The averaged particle diffusivity over the helical volume, estimated with the Monte Carlo code ORBIT, has a neoclassical-like dependence on collisionality and does not show the 1/{nu} trend of un-optimized stellarators. In particular, the helical region boundary, corresponding to an electron transport barrier with zero magnetic shear and improved confinement, has been investigated using numerical codes common to the stellarator community. In fact, the DKES/PENTA codes have been applied to RFP for local neoclassical transport computations, including radial electric field, to estimate thermal diffusion coefficients in the barrier region for typical RFX-mod temperature and density profiles. A comparison with power balance estimates shows that residual chaos due to secondary tearing modes and small-scale turbulence still contribute to drive anomalous transport in the barrier region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma flow healing of magnetic islands in stellarators

Recent experiments from the large helical device (LHD) demonstrate a correlation between the 'healing' of vacuum magnetic islands in stellarators and changes in the plasma flow. A model explaining this phenomenon is developed based on self-consistent torque balance and island evolution equations. In conventional stellarators, neoclassical flow damping physics plays an important role in establishing the flow profiles. The balance of neoclassical damping and cross-field viscosity produces a radial boundary layer for the plasma rotation profile outside the separatrix of a locked magnetic island. The width of this boundary layer decreases as the plasma becomes less collisional. Associated with these flow effects are plasma currents flowing in the island region that attempt to suppress island formation. These currents are enhanced as the collisionality drops making magnetic island healing occur more readily in high temperature conventional stellarators. The analytic theory produces a critical {beta} for healing that scales monotonically with collisionality and is in qualitative agreement with LHD observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fusion neutron generation computations in a stellarator-mirror hybrid with neutral beam injection

In the paper [Moiseenko V.E., Noack K., Agren O. 'Stellarator-mirror based fusion driven fission reactor' J Fusion Energy 29 (2010) 65.], a version of a fusion driven system (FDS), i.e. a sub-critical fast fission assembly with a fusion plasma neutron source, is proposed. The plasma part of the reactor is based on a stellarator with a small mirror part. Hot ions with high perpendicular energy are assumed to be trapped in the magnetic mirror part. The stellarator part which connects to the mirror part and provides confinement for the bulk (deuterium) plasma. In the magnetic well of the mirror part, fusion reactions occur from collisions between a of hot ion component (tritium) with cold background plasma ions. RF heating is one option to heat the tritium. A more conventional method to sustain the hot ions is neutral beam injection (NBI), which is here studied numerically for the above-mentioned hybrid scheme. For these studies, a new kinetic code, KNBIM, has been developed. The code takes into account Coulomb collisions between the hot ions and the background plasma. The geometry of the confining magnetic field is arbitrary for the code. It is accounted for via a numerical bounce averaging procedure. Along with the kinetic calculations the neutron generation intensity and its spatial distribution are computed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Self-consistent simulations of nonlinear magnetohydrodynamics and profile evolution in stellarator configurations

Self-consistent extended MHD framework is used to investigate nonlinear macroscopic dynamics of stellarator configurations. In these calculations, initial conditions are given by analytical 3-D vacuum solutions. Finite beta discharges in a straight stellarator are simulated. Vacuum magnetic fields are applied to produce stellarator-like rotational transform profiles with iota(0) ≤ 0.5 and iota(0) ≥ 0.5. The vacuum magnetic fields are either helically symmetric or spoiled by the presence of magnetic harmonics of incommensurate helicity. As heat is added to the system, pressure-driven instabilities are excited when a critical β is exceeded. These instabilities may grow to large amplitude and effectively terminate the discharge, or they may saturate nonlinearly as the configuration evolves. In all of these studies, anisotropic heat conduction is allowed with κ{sub ∥}/κ{sub ⊥}=10{sup 4}−10{sup 7}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisionless microinstabilities in stellarators. I. Analytical theory of trapped-particle modes

This is the first in a series of papers about collisionless, electrostatic micro-instabilities in stellarators, with an emphasis on trapped-particle modes. It is found that, in so-called maximum-J configurations, trapped-particle instabilities are absent in large regions of parameter space. Quasi-isodynamic stellarators have this property (approximately), and the theory predicts that trapped electrons are stabilizing to all eigenmodes with frequencies below the electron bounce frequency. The physical reason is that the bounce-averaged curvature is favorable for all orbits, and that trapped electrons precess in the direction opposite to that in which drift waves propagate, thus precluding wave-particle resonance. These considerations only depend on the electrostatic energy balance and are independent of all geometric properties of the magnetic field other than the maximum-J condition. However, if the aspect ratio is large and the instability phase velocity differs greatly from the electron and ion thermal speeds, it is possible to derive a variational form for the frequency showing that stability prevails in a yet larger part of parameter space than what follows from the energy argument. Collisionless trapped-electron modes should therefore be more stable in quasi-isodynamic stellarators than in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of continuum damping of Alfvén eigenmodes in tokamak and stellarator equilibria

In an ideal magnetohydrodynamic (MHD) plasma, shear Alfvén eigenmodes may experience dissipationless damping due to resonant interaction with the shear Alfvén continuum. This continuum damping can make a significant contribution to the overall growth/decay rate of shear Alfvén eigenmodes, with consequent implications for fast ion transport. One method for calculating continuum damping is to solve the MHD eigenvalue problem over a suitable contour in the complex plane, thereby satisfying the causality condition. Such an approach can be implemented in three-dimensional ideal MHD codes which use the Galerkin method. Analytic functions can be fitted to numerical data for equilibrium quantities in order to determine the value of these quantities along the complex contour. This approach requires less resolution than the established technique of calculating damping as resistivity vanishes and is thus more computationally efficient. The complex contour method has been applied to the three-dimensional finite element ideal MHD Code for Kinetic Alfvén waves. In this paper, we discuss the application of the complex contour technique to calculate the continuum damping of global modes in tokamak as well as torsatron, W7-X and H-1NF stellarator cases. To the authors' knowledge, these stellarator calculations represent the first calculation of continuum damping for eigenmodes in fully three-dimensional equilibria. The continuum damping of global modes in W7-X and H-1NF stellarator configurations investigated is found to depend sensitively on coupling to numerous poloidal and toroidal harmonics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical investigation of non-perturbative kinetic effects of energetic particles on toroidicity-induced Alfvén eigenmodes in tokamaks and stellarators

The resonant interaction of shear Alfvén waves with energetic particles is investigated numerically in tokamak and stellarator geometry using a non-perturbative MHD-kinetic hybrid approach. The focus lies on toroidicity-induced Alfvén eigenmodes (TAEs), which are most easily destabilized by a fast-particle population in fusion plasmas. While the background plasma is treated within the framework of an ideal-MHD theory, the drive of the fast particles, as well as Landau damping of the background plasma, is modelled using the drift-kinetic Vlasov equation without collisions. Building on analytical theory, a fast numerical tool, STAE-K, has been developed to solve the resulting eigenvalue problem using a Riccati shooting method. The code, which can be used for parameter scans, is applied to tokamaks and the stellarator Wendelstein 7-X. High energetic-ion pressure leads to large growth rates of the TAEs and to their conversion into kinetically modified TAEs and kinetic Alfvén waves via continuum interaction. To better understand the physics of this conversion mechanism, the connections between TAEs and the shear Alfvén wave continuum are examined. It is shown that, when energetic particles are present, the continuum deforms substantially and the TAE frequency can leave the continuum gap. The interaction of the TAE with the continuum leads to singularities in the eigenfunctions. To further advance the physical model and also to eliminate the MHD continuum together with the singularities in the eigenfunctions, a fourth-order term connected to radiative damping has been included. The radiative damping term is connected to non-ideal effects of the bulk plasma and introduces higher-order derivatives to the model. Thus, it has the potential to substantially change the nature of the solution. For the first time, the fast-particle drive, Landau damping, continuum damping, and radiative damping have been modelled together in tokamak- as well as in stellarator geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The shape of LITTLE THINGS dwarf galaxies DDO 46 and DDO 168: Understanding the stellar and gas kinematics

Determining the shape of dwarf irregular (dIrr) galaxies is controversial because if one assumes that these objects are disks and if these disks are randomly distributed over the sky, then their projected minor-to-major axis ratios should follow a particular statistical distribution, which is not observed. Thus, different studies have led to different conclusions. Some believe that the observed distributions can be explained by assuming the dIrrs are thick disks while others have concluded that dIrrs are triaxial. Fortunately, the central stellar velocity dispersion, σ{sub z,0}, combined with maximum rotation speed, V{sub max}, provides a kinematic measure, V{sub max}/σ{sub z,0}, which gives the three-dimensional shape of a system. In this work, we present the stellar and gas kinematics of DDO 46 and DDO 168 from the Local Irregulars That Trace Luminosity Extremes; The H i Nearby Galaxy Survey (LITTLE THINGS) and determine their respective V{sub max}/σ{sub z,0} values. We used the Kitt Peak National Observatory's Mayall 4 m telescope with the Echelle spectrograph as a long-slit spectrograph, which provided a two-dimensional, 3′-long slit. We acquired spectra of DDO 168 along four position angles (PAs) by placing the slit over the morphological major and minor axes and two intermediate PAs. However, due to poor weather conditions during our observing run for DDO 46, we were able to extract only one useful data point from the morphological major axis. We determined a central stellar velocity dispersion perpendicular to the disk, σ{sub z,0}, of 13.5 ± 8 km s{sup −1} for DDO 46 and 〈σ{sub z,0}〉 of 10.7 ± 2.9 km s{sup −1} for DDO 168. We then derived the maximum rotation speed in both galaxies using the LITTLE THINGS H i data. We separated bulk motions from non-circular motions using a double Gaussian decomposition technique and applied a tilted-ring model to the bulk velocity field. We corrected the observed H i rotation speeds for asymmetric drift and found a maximum velocity, V{sub max}, of 77.4 ± 3.7 and 67.4 ± 4.0 for DDO 46 and DDO 168, respectively. Thus, we derived a kinematic measure, V{sub max}/σ{sub z,0}, of 5.7 ± 0.6 for DDO 46 and 6.3 ± 0.3 for DDO 168. Comparing these values to ones determined for spiral galaxies, we find that DDO 46 and DDO 168 have V{sub max}/σ{sub z,0} values indicative of thin disks, which is in contrast to minor-to-major axis ratio studies.

79 ASTRONOMY AND ASTROPHYSICS↗