Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spacecraft materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Cryogenic Thermal Conductivity Measurements on Candidate Materials for Space Missions

Spacecraft and instruments on space missions are built using a wide variety of carefully-chosen materials. It is common for NASA engineers to propose new candidate materials which have not been totally characterized at cryogenic temperatures. In many cases a material's cryogenic thermal conductivity must be known before selecting it for a specific space-flight application. We developed a test facility in 2004 at NASA's Goddard Space Flight Center to measure the longitudinal thermal conductivity of materials at temperatures between 4 and 300 Kelvin, and we have characterized many candidate materials since then. The measurement technique is not extremely complex, but proper care to details of the setup, data acquisition and data reduction is necessary for high precision and accuracy. We describe the thermal conductivity measurement process and present results for ten engineered materials, including alloys, polymers, composites, and a ceramic.

James Tuttle↗
NASA NTRS1974

The interplanetary and near-Jupiter meteoroid environments

The meteoroid penetration detectors on the Pioneer 10 spacecraft recorded 67 meteoroid penetrations through the 25-micron stainless steel test material while the spacecraft was between 1.0 and 5.1 AU. Ten of these penetrations occurred during the encounter with Jupiter. The cumulative spatial density of meteoroids with masses greater than 2 nanograms has been calculated from these data for interplanetary space and for the near-Jupiter space. The spatial density is found to be essentially constant in interplanetary space between 1 and 5 AU, approximately 1 meteoroid per cubic km, and 1-2 orders of magnitude greater near Jupiter. There was no increase in the spatial density of meteoroids in the asteroid belt and hence no evidence that there is a significant asteroidal component of 2-nanogram meteoroids. It is uncertain whether the meteoroids detected near Jupiter were in orbit about Jupiter or were gravitationally focused toward the planet from solar orbits.

Humes, D. H.↗
NASA NTRS1995

Spacecraft Jitter Attenuation Using Embedded Piezoelectric Actuators

Remote sensing from spacecraft requires precise pointing of measurement devices in order to achieve adequate spatial resolution. Unfortunately, various spacecraft disturbances induce vibrational jitter in the remote sensing instruments. The NASA Langley Research Center has performed analysis, simulations, and ground tests to identify the more promising technologies for minimizing spacecraft pointing jitter. These studies have shown that the use of smart materials to reduce spacecraft jitter is an excellent match between a maturing technology and an operational need. This paper describes the use of embedding piezoelectric actuators for vibration control and payload isolation. In addition, recent advances in modeling, simulation, and testing of spacecraft pointing jitter are discussed.

Belvin, W. Keith↗
NASA NTRS1996

What Drives Spacecraft Cost: A Look Into How Material Characteristics Relate to the Material Complexity Multipliers

Today a variety of engineered materials are used to build the space vehicles and satellites that NASA, DOD and the aerospace community will use in future projects. These materials can be a significant part of the cost when designing and building these systems. Current cost models such as NASCOM, SEER-H and PRICE allow the cost analysis to select materials requirements during the development of the cost model. It should be noted however that some of these models do not always give the most detailed information with respect to material specifications for the given cost model. Instead the materials are defined within broad classification, giving questionable data with regard to specific material cost. It is the objective of this paper to present a summary of basic information on materials to assist the cost analyst in the development of their models. Specifically, this paper will compare materials and their complexity multipliers to some specific material properties.

Rosmait, Russell L.↗
NASA NTRS2003

Radiation Shielding for Manned Deep Space Missions

The arrival of the Expedition 1 Crew at the International Space Station represents the beginning of the continuous presence of man in space. Already we are deploying astronauts and cosmonauts for missions of approx. 6 months onboard the ISS. In the future we can anticipate that more people will be in space and they will be there for longer periods. Even with 6-months deployments to the ISS, the radiation exposure that crew members receive is approaching the exposure limits imposed by the governments of the space- faring nations. In the future we can expect radiation protection to be a dominant consideration for long manned missions. Recognizing this, NASA has expanded their research program on radiation health. This program has three components, bioastronautics, fundamental biology and radiation shielding materials. Bioastronautics is concerned with the investigating the effects of radiation on humans. Fundamental biology investigates the basic mechanisms of radiation damage to tissue. Radiation shielding materials research focuses on developing accurate computational tools to predict the radiation shielding effectiveness of materials. It also investigates new materials that can be used for spacecraft. The radiation shielding materials program will be described and examples of results from the ongoing research will be shown.

Adams, James H., Jr.↗
NASA NTRS2018

Atomic Oxygen Environments, Effects, and Mitigation

Atomic oxygen is the most predominant specie in low Earth orbit (LEO) and is contained in the upper atmosphere of many other planetary bodies. Formed by photo-dissociation of molecular oxygen, it is highly reactive and energetic enough to break chemical bonds on the surface of many materials and react with them to form either stable or volatile oxides. The extent of the damage for spacecraft depends a lot on how much atomic oxygen arrives at the surface, the energy of the atoms, the reactivity of the material that is exposed to it and other constituents in the atmosphere. Oxide formation can result in shrinkage, cracking, or erosion which can also result in changes in optical, thermal, or mechanical properties of the materials exposed. The extent of the reaction can be affected by mechanical loading, temperature, and other environmental components such as ultraviolet radiation or charged particles. Atomic oxygen generally causes a surface reaction, but it can scatter under coatings and into crevices causing oxidation much farther into a spacecraft surface or structure than would be expected. Atomic oxygen effects for LEO atomic oxygen compared to atomic oxygen effects in a Mars environment, effects atomic oxygen can have on typical spacecraft materials, and mitigation techniques will be presented.

Oxygen atoms↗
NASA NTRS1991

Midinfrared spectral investigations of carbonates: Analysis of remotely sensed data

Recent airborne thermal infrared observations of Mars from the Kuiper Airborne Observatory (KAO) have provided evidence for the presence of carbonates, sulfates, and hydrates. Using the optical properties of calcite and anhydrite, it was estimated that CO3's and SO4's constituted about 1 to 3 and 10 to 15 wt. percent, repectively of the materials composing the atmospheric dust. Using the derived value as an estimate of total CO3 abundance, and making an assumption that the CO3's were uniformly distributed within the Martian regolith, it was estimated that such a CO3 reservoir could contain roughly 2 to 5 bars of CO2. While the results indicate that several volatile-bearing materials are present on Mars, the observations from the KAO are inherently limited in their ability to determine the spatial distributions of these materials. However, previous spacecraft observations of Mars provide both the spectral coverage necessary to identify these materials, as well as the potential for investigating their spatial variability. This has prompted us to pursue a reinvestigation of the Mariner 6 and 7 infrared spectrometer and Mariner 9 infrared interferometer spectrometer observations. The former data have been recently made available in digital format and calibration of wavelengths and intensities are almost complete. Additionally, we are pursuing the derivation of optical constants of more appropriate carbonates and sulfates.

Roush, T.↗
NASA NTRS1995

The Long Duration Exposure Facility (LDEF) photographic survey special publication

During the construction, integration, launch, retrieval and deintegration of the Long Duration Exposure Facility (LDEF), photographic surveys were made. Approximately 10,000 photographs were taken during the various phases of the LDEF project. These surveys are of technical and scientific importance because they revealed the pre and post flight conditions of the experiment trays as well as the spacecraft. Visual inspection of the photographs reveal valuable data such as space environment's effects and the earth atmosphere's effects post-retrieval. Careful files and records have been kept of these photographs. Each photograph has a Kennedy Space Center photo number or a Johnson Spaceflight Center photo number as well as a Langley Research Center photo number. The tray number, row number, and experiment number are also noted. Out of the 10,000 photographs taken, approximately 700 selected photographs were chosen for publication in a NASA Special Publication (SP) because they reveal the effects of space exposure to the viewer. These photographs will give researchers and spacecraft designers visual images of the effects of the space environment on specific materials, systems and spacecraft in general. One can visually see the degradation of thermal blankets, meteoroid craters, outgassing discoloration, atomic oxygen erosion, etc.

Oneal, Robert L.↗
NASA NTRS1974

Environment of a spacecraft produced by its own outgassing

The effect of material outgassing on the spacecraft internal pressure, on contamination of critical surfaces, on detection of distant weak radiation sources and other problems are discussed. The internal and external outgassing fluxes are examined in relation to their variation with time, temperature, and location. Methods for estimating the total outgassing of a spacecraft are reported. These methods are supported by results obtained in vacuum chamber tests.

Scialdone, J. J.↗
NASA NTRS2006

Space Environment Effects on Materials : An Overview

A general overview on the space environment and its effects on materials is presented. The topics include: 1) Impact of Space Effects on Spacecraft Costs; 2) Space Environment Effects on Spacecraft by Source; 3) Primary Source of Space Effects: The Sun; 4) The Earth's Environment; 5) Trapped Radiation Belts; 6) Aurora Are Everywhere; 7) Spacecraft Interactions; 8) Atmospheric Effects; 9) Contaminant Effects on Materials; 10) Meteoroid/Debris Effects on Materials; 11) Spacecraft Surface Charging; 12) Surface Discharge Effects; 13) Internal Electrostatic Discharge--Satellite Killer; 14) Plasma Interactions DS-1 Ion Engines; 15) Radiation Effects on Spacecraft Systems and Materials; 16) Total Ionizing Dose Effects Total Ionizing Dose Effects; 17) Man-Made Sources of Space Effects Man-Made Sources of Space Effects; and 18) Space Environments Versus Interactions.

charged particles↗
NASA NTRS1992

Performance and properties of atomic oxygen protective coatings for polymeric materials

Such large LEO spacecraft as the Space Station Freedom will encounter high atomic oxygen fluences which entail the use of protective coatings for their polymeric structural materials. Such coatings have demonstrated polymer mass losses due to oxidation that are much smaller than those of unprotected materials. Attention is here given to protective and/or electrically conductive coatings of SiO(x), Ge, and indium-tin oxide which have been exposed to atomic oxygen in order to ascertain mass loss, electrical conductivity, and optical property dependence on atomic oxygen exposure.

Banks, Bruce A.↗
NASA NTRS1972

Proposed specification for the solar constant and air mass zero solar spectral irradiance

The specification defines the solar constant and the zero air mass solar spectral irradiance for use in thermal analysis, thermal balance testing, and other tests of spacecraft and spacecraft components and materials. It is based upon data from experimental measurements made from high altitude aircraft, balloons, spacecraft, and the earth's surface. The stated accuracies are based on the estimated accuracies of the measurements, calibrations, and radiometric scales.

Source record↗
NASA NTRS1990

Plasma interactions and effects for large systems

Information on plasma-spacecraft interactions and the effects on spacecraft systems and materials is given in viewgraph form. Information is given on plasma characteristics, ionospheric charge density, spacecraft floating potential, floating potentials of self-biased solar arrays, and geosynchronous earth orbit issues.

Snyder, David B.↗