RC rate generator for slow speed measurement Patent
Device utilizing RC rate generators for continuous slow speed measurement
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Device utilizing RC rate generators for continuous slow speed measurement
Slow mode shocks in interplanetary space detected by Mariner 5 spacecraft 3.5 and 27 million km from earth
Multimode slow wave planar spiral antenna design and radiation field characteristics
Collisionless magnetic slow shocks laminar wave train structure, using two-fluid hydromagnetics with ion cyclotron radius dispersion
Steady slow free molecule flow past sphere, obtaining distribution function and surface boundary conditions
Probable reverse and forward slow shocks were found in plasma and magnetic-field data from Pioneer 6. The shocks were oblique and weak (Mach of approximately 1.2). No reverse fast shocks were found. Numerous (50) other discontinuities were found, most of which are probably tangential, since all the plasma parameters changed across most of them.
Description of the performance of the silicon diode array vidicon - an imaging sensor which possesses wide spectral response, high quantum efficiency, and linear response. These characteristics, in addition to its inherent ruggedness, simplicity, and long-term stability and operating life make this device potentially of great usefulness for ground-base and spaceborne planetary and stellar imaging applications. However, integration and charged storage for periods greater than approximately five seconds are not possible at room temperature because of diode saturation from dark current buildup. Since dark current can be reduced by cooling, measurements were made in the range from -65 to 25 C. Results are presented on the extension of integration, storage, and slow scan capabilities achievable by cooling. Integration times in excess of 20 minutes were achieved at the lowest temperatures. The measured results are compared with results obtained with other types of sensors and the advantages of the silicon diode array vidicon for imaging applications are discussed.
Thirty-eight subjects were required to execute 120 head movements in a slow rotation room at each 1-rpm increase in velocity of the room between 0 and 6 rpm and, after a single-step gradual return to zero velocity, execute 120 head movements either immediately after the return or after delay periods varying from 1 to 24 hours unless, at any time, more than mild symptoms of motion sickness were elicited. A second stress profile differed by the sequential addition of an incremental adaptation schedule in which the direction of rotation was reversed. The experimental findings demonstrated the acquisition of direction-specific adaptation effects that underwent spontaneous decay with a short time constant (hours). Speculations are presented which could account for the simultaneous acquisition of short-term and long-term adaptation effects. The findings support the theory that motion sickness, although a consequence of vestibular stimulation, has its immediate origin in nonvestibular systems, implying a faculative or temporary linkage between the vestibular and nonvestibular systems.
A silicon vidicon camera was designed, built, and tested to determine its potential for use aboard future Mariner spacecraft. Slow scan operation is made possible by cooling the vidicon to -40 C. Cooling is achieved by a simple thermal condition path between the vidicon and a radiator mounted on top of the camera head. The camera was successfully operated under simulated space flight conditions and has survived vibration designed to simulate the launch of a Mariner spacecraft. A description of the camera and its operation along with the results of the testing is presented.
Thirty-eight subjects were required to execute 120 head movements in a slow rotation room at each 1-rpm increase in velocity of the room between 0 and 6 rpm and, after a single-step gradual return to zero velocity, execute 120 head movements either immediately after return or after delay periods varying from 1 to 24 hours unless, at any time, more than mild symptoms of motion sickness were elicited. A second stress profile differed by the sequential addition of an incremental adaptation schedule (identical to the first) in which the direction of rotation was reversed. The experimental findings demonstrated the acquisition of direction-specific adaptation effects that underwent spontaneous decay with a short time constant (hours). With their disappearance a nondirection-specific adaptation was revealed with a long-time constant (days). Speculations are presented which could account for the simultaneous acquisition of short-term and long-term adaptation effects.
A simple, inexpensive method for studying slow crack growth is described. The method entails measurements of load relaxation at constant displacement using a double torsion specimen. It is demonstrated that the data generated using this technique are in excellent agreement with data obtained using the more complex conventional techniques, for a range of materials - steel, titanium, glass, aluminum oxide, PMMA. These encouraging initial results suggest that additional and more detailed studies using this test procedure are merited.
Extension of the classical theory of fracture to viscoelastic and elastic-plastic materials in which the plasticity effects are confined to a narrow band encompassing the crack front. It is suggested that the Griffith-Irwin criterion of fracture, which requires that the energy release rate computed for a given boundary value problem equal the critical threshold, ought to be replaced by a differential equation governing the slow growth of a crack prior to the onset of rapid propagation. A new term which enters the equation of motion in the dissipative media is proportional to the energy lost within the end sections of the crack, and thus it reflects the extent of inelastic behavior of a solid. A concept of 'apparent' surface energy is introduced to account for the geometry-dependent and the rate-dependent phenomena which influence toughness of an inelastic solid. Three hypotheses regarding the condition for fracture in the subcritical range of load are compared.
The initial results of a terminal navigation analysis for the proposed 1980 solar electric slow flyby mission to the comet Encke are presented. The navigation technique employs onboard optical measurements with the scientific television camera, groundbased observations of the spacecraft and comet, and groundbased orbit determination and thrust vector update computation. The knowledge and delivery accuracies of the spacecraft are evaluated as a function of the important parameters affecting the terminal navigation. These include optical measurement accuracy, thruster noise level, duration of the planned terminal coast period, comet ephemeris uncertainty, guidance initiation time, guidance update frequency, and optical data rate.
The comet Encke at its apparition in 1980 is investigated as the target for a solar electric slow flyby mission having a flight time of approximately two years. Mission trade off studies are performed for two modes: namely the direct earth to Encke mode and the Venus gravity assist mode. Baseline missions for each mode are selected which flyby Encke at 4 km/s 30 days before perihelion. The direct mission baseline is investigated in detail for trajectory parameters related to spacecraft and science requirements. The Venus flyby mode can deliver the same payload with a total power requirement about 20% less than the direct mode. The cost is a longer flight time and a Venus flyby at about 500 km above the surface. One asteroid can be encountered at very close range on either mission. The asteroids available and the extra propellant required are determined.
The remarkable detail resemblence of the spectrum of the peculiar emission-line star He 2-177 to that of the slow nova RR Telescopii is illustrated by tabulated data and discussed. The evolution of the spectrum since 1965 closely resembles the evolution of RR Tel between 1951 and 1954. A newly determined position of X-ray source 2U 1639-62 makes its identification with He 2-177 less probable than before.
A technique is presented for improving navigation accuracy in the Solar Electric Encke Slow Flyby Mission proposed to encounter the comet Encke during its 1980 apparition. The effect of the dominant navigation error source, the high level thruster noise, is reduced through the introduction of a ballistic coast arc for the purpose of orbit determination enhancement. The placement and duration of the arc is investigated with respect to its impact on final delivery error and on control effort required for trajectory correction. Also examined are the changes in delivery accuracy and control effort as a result of the time lag between the state estimation process and the thrust control program update.
A method is presented for using simple electronic components to obtain the high sensitivity needed to measure very slow crack growth rates. The technique presented can reduce the experimental time considerably and also yield a greater amount of data more accurately than optical techniques for measuring crack growth rates.
The manual control was studied of a vehicle with slowly time-varying dynamics to develop analytic and computer techniques necessary for the study of time-varying systems. The human operator is considered as he controls a time-varying plant in which the changes are neither abrupt nor so slow that the time variations are unimportant. An experiment in which pilots controlled the longitudinal mode of a simulated time-varying aircraft is described. The vehicle changed from a pure double integrator to a damped second order system, either instantaneously or smoothly over time intervals of 30, 75, or 120 seconds. The regulator task consisted of trying to null the error term resulting from injected random disturbances with bandwidths of 0.8, 1.4, and 2.0 radians per second. Each of the twelve experimental conditons was replicated ten times. It is shown that the pilot's performance in the time-varying task is essentially equivalent to his performance in stationary tasks which correspond to various points in the transition. A rudimentary model for the pilot-vehicle-regulator is presented.