Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “single layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The study of microstrip antenna arrays and related problems

In February, an initial computer program to be used in analyzing the four-element array module was completed. This program performs the analysis of modules composed of four rectangular patches which are corporately fed by a microstrip line network terminated in four identical load impedances. Currently, a rigorous full-wave analysis of various types of microstrip line feed structures and patches is being performed. These tests include the microstrip line feed between layers of different electrical parameters. A method of moments was implemented for the case of a single dielectric layer and microstrip line fed rectangular patches in which the primary source is assumed to be a magnetic current ribbon across the line some distance from the patch. Measured values are compared with those computed by the program.

Lo, Y. T.↗
NASA NTRS1975

Spinning mode sound propagation in ducts with acoustic treatment and sheared flow

The propagation of spinning mode sound was considered for a cylindrical duct with sheared steady flow. Calculations concentrated on the determination of the wall optimum acoustic impedance and the maximum possible attenuation. Both the least attenuated and higher radial modes for spinning lobe patterns were considered. A parametric study was conducted over a wide range of Mach numbers, spinning lobe numbers, sound frequency, and boundary layer thickness. A correlation equation was developed from theoretical considerations starting with the thin boundary layer approximation of Eversman. This correlation agrees well with the more exact calculations for inlets and provides a single boundary layer refraction parameter which determines the change in optimum wall impedance due to refraction effects.

Rice, E. J.↗
NASA NTRS1975

Spinning mode sound propagation in ducts with acoustic treatment and sheared flow

The propagation of spinning mode sound was considered for a cylindrical duct with sheared steady flow. The calculations concentrated on the determination of the wall optimum acoustic impedance and the maximum possible attenuation. Both the least attenuated and higher radial modes for spinning lobe patterns were considered. A parametric study was conducted over a wide range of Mach numbers, spinning lobe numbers, sound frequency, and boundary layer thickness. A correlation equation was developed from theoretical considerations starting with the thin boundary layer approximation of Eversman. This correlation agrees well with the more exact calculations for inlets and provides a single boundary layer refraction parameter which determines the change in optimum wall impedance due to refraction effects.

Rice, E. J.↗
NASA NTRS2004

Novel High-Voltage, High-Power Piezoelectric Transformer Developed and Demonstrated for Space Communications Applications

Improvements in individual piezoelectric transformer (PT) performance and the combination of these PTs in a unique modular topology under a Phase I contract with the NASA Glenn Research Center have enabled for the first time the simultaneous achievement of both high voltage and high power at much higher levels than previously obtained with any PT. Feasibility was demonstrated by a prototype transformer (called a Tap-Soner), which is shown in the preceding photograph as part of a direct-current to direct-current (dc-dc) converter having two outputs rated at 1.5 kV/5 W and 4.5 kV/20 W. The power density of 3.5 W/cm3 is significantly lower than for magnetic transformers with the same voltage and power output. This development, which is being done under a Small Business Innovation Research (SBIR) contract by Face Electronics, LC (Norfolk, VA), is based on improvements in the materials and design of Face's basic patented Transoner-T3 PT, shown in the left in the following figure. The T3 PT is most simply described as a resonant multilayer transducer where electrical energy at the input section is efficiently mechanically coupled to the output section, which then vibrates in a fundamental longitudinal mode to generate a high gain in voltage. The piezoelectric material used is a modified lead-zirconium-titanate-based ceramic. One of the significant improvements in PT design was the incorporation of a symmetrical double input layer, shown on the right in the following figure, which eliminated the lossy bending vibration modes characteristic of a single input layer. The performance of the improved PT was optimized to 1.5 kV/5 W. The next step was devising a way to combine the individual PTs in a modular circuit topology needed to achieve the desired high voltage and power output. Since the optimum performance of the individual PT occurs at resonance, the most efficient operation of the modular transformer was achieved by using a separate drive circuit for each PT. The output section consists of a separate output rectifier for each PT connected in series.

Carazo, Alfredo V.↗
DOE OSTI2026

Novel Cell-Type-Specific Drought-Responsive Proteins in Root Tips of Field-Grown Perennial Switchgrass

The root-tip region of plants, including the root cap, forms the most basal terminal of the root and exhibits a high degree of cellular complexity in terms of morphology, cytological function, and interaction with environmental cues in the soil. Cells in this region follow a developmental trajectory, transitioning from stem cells to meristematic cells, and ultimately to fully differentiated cell types. However, our understanding of root-tip cell-type specific proteomic responses to abiotic stresses, such as drought, particularly under field conditions, remains limited. This study aimed to identify spatially resolved, cell type-specific proteomes in switchgrass (Panicum virgatum) root tips under drought stress. Root tips were collected from seven-year-old, field-grown switchgrass ‘Alamo’ plants excavated under both well-watered and long-term drought conditions. Cell type-specific proteins were identified using laser capture microdissection (LCM) coupled with nanoPOTS (Nanodroplet Processing in One Pot for Trace Samples) and nano-LC-MS proteomics analysis. Five distinct cell types were targeted: (1) cells in the quiescent center and stem cell niche (QuC), (2) protodermal epidermal cells (PEC) in the meristematic zone, (3) epidermal cells in the transition and elongation zones above the root cap (Epi), (4) peripheral root cap cells (PRC), forming 2–3 layers below the PEC and 1–2 layers above the root border cells, and (5) columella root cap cells (Col) comprising of the columella initials and a single underlying layer of cells undergoing active growth. Principal component analysis (PCA) revealed clear separation among the five targeted cell types, confirming distinct proteomic profiles. Proteins predominantly enriched in each cell type were linked to distinct cellular functions, with QuC cells showing involvement in chromosomal behavior, DNA replication, and mitosis—key processes for stem cell niche regulation. Drought stress resulted in alterations of proteostasis, as evidenced by significant decreases in ribosomal proteins and increases in protein synthesis inhibitors. Moreover, drought stress induced unique cell-type–specific proteins involved in phytohormone biosynthesis and signaling pathways, including auxin, cytokinin, and jasmonic acid. In particular, QuC cells were more highly enriched in proteins associated with DNA repair and mitotic processes. Metabolic pathways related to amino acids, carbohydrates, and lipids were differentially affected in a cell-type–dependent manner, whereas general stress-responsive proteins exhibited consistent changes across all five cell types. Overall, this study provides unique spatially resolved, cell-type-specific proteomic profiles in root tips, representing a significant advancement in our understanding of the cellular mechanisms underlying plant responses to drought stress in natural field conditions.

perennial grass↗
DOE OSTI2022

Synthesis of La 2–x Sr x CuO 4 films via atomic layer-by-layer molecular beam epitaxy

Atomic layer-by-layer molecular beam epitaxy (ALL-MBE) is a sophisticated technique to synthesize high-temperature superconductor (HTS) materials. ALL-MBE produces single-crystal HTS films with atomically smooth surfaces and interfaces, as well as precise multilayer heterostructures engineered down to a single atomic layer level. This enables the fabrication of tunnel junctions, nanowires, nanorings, and other HTS devices of interest. Our group has focused on ALL-MBE synthesis and materials science of La 2–x Sr x CuO 4 (LSCO), a representative HTS cuprate. In the past two decades, we have synthesized over three thousand LSCO thin films and characterized them by a range of analytical techniques. Here, we present in full detail a systematic process for the synthesis and engineering of atomically perfect LSCO films. The procedure includes the preparation of substrates, calibration of the elemental sources, the recipe for ALL growth of LSCO films without any secondary-phase precipitates, post-growth annealing of the films, and ex situ film characterization. This report should aid replication and dissemination of this technique of synthesizing single-crystal LSCO films for basic research as well as for HTS electronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRSDate not supplied

TPSAS-NF1676L-11082-DND

Analysis of one decade of radar-lidar and Geostationary Operational Environmental Satellite (GOES) observations at the Atmospheric Radiation Measurement (ARM) Program Southern Great Plains (SGP) site reveals that there is excellent agreement in the long-term mean cloud fractions (CF) derived from the surface and GOES data, and the CF is independent of temporal resolution and spatial scales for grid boxes of size 0.5o to 2.5°. When computed over a 0.5-hr (4-hr) period, cloud frequency of occurrence (FREQ) and amount when present (AWP) derived from the point surface data agree very well with the same quantities determined from GOES for a 0.5o (2.5o) region centered on the ARM SGP site. The values of FREQ (AWP) derived from the radar-lidar observations at a given altitude increase (decrease) as the averaging period increases from 5 min to 6 hours. Similarly, CF at a given altitude increases as the vertical resolution increases from 90 to 1000 m. The profiles of CF have distinct bimodal vertical distributions with a lower peak between 1 and 2 km and a higher one between 8 and 11 km. The 10-year mean total CF, 46.9%, varies seasonally from a summer minimum of 39.8% to a maximum of 54.6% during the winter. The annual mean CF is 1-2% less than that from previous studies, ~48-49%, because fewer clouds occurred during 2005 and 2006, especially during winter. The differences in single- and multi-layered CFs between this study and an earlier analysis can be explained by the different temporal resolutions used in the two studies where single-layered CFs decrease but multilayered CFs increase from a 5-min resolution to a 1-hr resolution. The vertical distribution of nighttime GOES high-cloud tops agrees well with surface observations, but during daytime, fewer high clouds are retrieved by the GOES analysis than seen from the surface observations. The frequencies of occurrence for both daytime and nighttime GOES low-cloud tops are significantly higher than surface observations, but the cloud fractions are in good agreement.

B Xi↗
NASA NTRS1993

Remote sensing of multilevel clouds during FIRE IFO 2

An unresolved difficulty in the remote sensing of clouds concerns the inability of the cloud retrieval algorithms to adequately recognize and analyze scenes containing overlapping cloud layers. Most cloud retrieval schemes, such as that used by the International Satellite Cloud Climatology Project (ISCCP) assume that each picture element (pixel) contains a single cloud layer. The current study begins to address the complexities of multilayered cloud property retrieval through the application of a modified multispectral, multiresolution (MSMR) method, first detailed in Baum et al. (1992), which merges 1.1 -km (at nadir) spectral data from the Advanced Very High Resolution Radiometer (AVHRR) with 17.4-km (at nadir) High Resolution Infrared Radiometer Sounder (HIRS/2, henceforth HIRS). Both instruments are flown aboard the National Oceanic and Atmospheric Administration (NOAA) polar-orbiting platforms. An ideal case study for this investigation is provided by the NOAA-11 overpass at 20:48 UTC on November 28, 1991. At this time, a large-scale cirrostratus veil overlaid a low-level stratus deck over much of the IFO region. There were both surface lidar and radar observations of the clouds as well as University of North Dakota (UND) Citation aircraft measurements. The presence of overlapping cloud layers within a HIRS FOV is determined from colocated AVHRR spectral data through the use of a fuzzy logic expert system. Conventional algorithms such as spatial coherence and CO2 slicing are used to retrieve cloud pressure and height for each identified cloud layer. The results from the satellite cloud retrieval analysis are compared to results from both surface- and aircraft-based measurements.

Baum, Bryan A.↗
NASA NTRS1997

Noise from Supersonic Coaxial Jets: Normal Velocity Profile - Part 2

Instability waves have been established as noise generators in supersonic jets. Recent analysis of these slowly diverging jets has shown that these instability waves radiate noise to the far field when the waves have components with phase velocities that are supersonic relative to the ambient speed of sound. This instability wave noise generation model has been applied to supersonic jets with a single shear layer and is now applied to supersonic coaxial jets with two initial shear layers. In this paper the case of coaxial jets with normal velocity profiles is considered, where the inner jet stream velocity is higher than the outer jet stream velocity. To provide mean flow profiles at all axial locations, a numerical scheme is used to calculate the mean flow properties. Calculations are made for the stability characteristics in the coaxial jet shear layers and the noise radiated from the instability waves for different operating conditions with the same total thrust, mass flow and exit area as a single reference jet. The effects of changes in the velocity ratio, the density ratio and the area ratio are each considered independently.

Dahl, M. D.↗
DOE OSTI2020

Single Ru Atoms Stabilized by Hybrid Amorphous/Crystalline FeCoNi Layered Double Hydroxide for Ultraefficient Oxygen Evolution

Abstract In view of the sluggish kinetics suppressing the oxygen evolution reaction (OER), developing efficient and robust OER catalysts is urgent and essential for developing efficient energy conversion technologies. Herein, hybrid amorphous/crystalline FeCoNi layered double hydroxide (LDH)‐supported single Ru atoms (Ru SAs/AC‐FeCoNi) are developed for enabling a highly efficient electrocatalytic OER. The amorphous outer layer in Ru SAs/AC‐FeCoNi is composed of abundant defect sites and unsaturated coordination sites, which can serve as anchoring sites to stabilize single Ru atoms. The crystalline inner has a highly symmetric rigid structure, thereby strengthening the stability of support for a long‐lasting OER. The synergistic effects endow this hybrid catalyst with extremely low overpotential (205 mV at 10 mA cm −2 ). Density functional theory calculation indicates that single Ru atoms stabilized by hybrid amorphous/crystalline FeCoNi LDH facilitate the formation of Ru–O* (rate‐determining step), thus accelerating the OER process.

Hu, Yidong↗
NASA NTRS2003

Thermal-Structural Analysis of Sunshield Membranes

Future large infrared space telescopes, such as the James Webb Space Telescope (JWST), will require deployable sunshields to provide passive cooling for optics and instruments. Deployable sunshield structures for such applications typically consist of multiple thin-film membrane layers supported by deployable booms. The mechanical design of the sunshield must accommodate thermal strains due to layer-to-layer temperature differences as well as potentially large in-plane temperature gradients within individual film layers. This paper describes a thermal-structural analysis for predicting the stress state in a thin-film membrane subject to both mechanical thermal loads that could aid in the mechanical design of future sunshield structures. First the temperature field predicted by a thermal analysis is mapped to a structural finite element model, and then the structural response is predicted using a nonlinear static analysis. The structural model uses membrane elements in conjunction with a tension field material model to predict the response of the thin-film membrane layer. The tension field material model accounts for no-compression behavior associated with wrinkling and slackness. This approach was used to study the problem of a single membrane layer from the NASA reference concept for the JWST sunshield. Results from the analysis show that the membrane can experience a loss of tensile preload due to the presence of an in-plane temperature gradient representative of the cold-side layer temperature distribution predicted for the reference concept JWST.

Johnston, John↗
NASA NTRS1994

Delta-Doped CCDs for Enhanced UV Performance

Thin, backside-illuminated CCds are modified by growing a delta-doped silicon layer on the back surface using molecular beam epitaxy. Delta-doped CCDs exhibit stable and uniform 100 percent internal quantum efficiency. The process consists of growth of an epitaxial silicon layer on a fully-processed commercial CCd die in which 30 percent of a monolayer of boron atoms are incorporated into the lattice nominally in a single atomic layer. Long term stability was tested and showed no degradation of the device quantum efficiency over sixteen months.

silicon↗
NASA NTRS2010

InGaP Heterojunction Barrier Solar Cells

A new solar-cell structure utilizes a single, ultra-wide well of either gallium arsenide (GaAs) or indium-gallium-phosphide (InGaP) in the depletion region of a wide bandgap matrix, instead of the usual multiple quantum well layers. These InGaP barrier layers are effective at reducing diode dark current, and photogenerated carrier escape is maximized by the proper design of the electric field and barrier profile. With the new material, open-circuit voltage enhancements of 40 and 100 mV (versus PIN control systems) are possible without any degradation in short-circuit current. Basic tenets of quantum-well and quantum- dot solar cells are utilized, but instead of using multiple thin layers, a single wide well works better. InGaP is used as a barrier material, which increases open current, while simultaneously lowering dark current, reducing both hole diffusion from the base, and space charge recombination within the depletion region. Both the built-in field and the barrier profile are tailored to enhance thermionic emissions, which maximizes the photocurrent at forward bias, with a demonstrated voltage increase. An InGaP heterojunction barrier solar cell consists of a single, ultra-wide GaAs, aluminum-gallium-arsenide (AlGaAs), or lower-energy-gap InGaP absorber well placed within the depletion region of an otherwise wide bandgap PIN diode. Photogenerated electron collection is unencumbered in this structure. InGaAs wells can be added to the thick GaAs absorber layer to capture lower-energy photons.

Welser, Roger E.↗
DOE OSTI2025

Pyrochlore NaYbO2: A Potential Quantum Spin Liquid Candidate

The search for quantum spin liquids (QSL) and chemical doping in such materials to explore superconductivity have continuously attracted intense interest. Here, we report the discovery of a potential QSL candidate, pyrochlore-lattice β-NaYbO2. Colorless and transparent NaYbO2 single crystals, layered α-NaYbO2 (∼250 μm on edge) and octahedral β-NaYbO2 (∼50 μm on edge), were grown for the first time. Synchrotron X-ray single-crystal diffraction unambiguously determined that the newfound β-NaYbO2 belongs to the three-dimensional pyrochlore structure characterized by the R3̅m space group, corroborated by synchrotron X-ray and neutron powder diffraction and pair distribution function. Magnetic measurements revealed no long-range magnetic order or spin glass behavior down to 0.4 K with a low boundary spin frustration factor of 17.5, suggesting a potential QSL ground state. Under high magnetic fields, the potential QSL state was broken and spins order. Our findings reveal that NaYbO2 is a fertile playground for studying novel quantum states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Relation between interfacial shear and friction force in 2D materials

Understanding the interfacial properties between an atomic layer and its substrate is of key interest at both the fundamental and technological levels. From Fermi level pinning to strain engineering and superlubricity, the interaction between a single atomic layer and its substrate governs electronic, mechanical and chemical properties. Here, we measure the hardly accessible interfacial transverse shear modulus of an atomic layer on a substrate. By performing measurements on bulk graphite, and on epitaxial graphene films on SiC with different stacking orders and twisting, as well as in the presence of intercalated hydrogen, we find that the interfacial transverse shear modulus is critically controlled by the stacking order and the atomic layer–substrate interaction. Importantly, we demonstrate that this modulus is a pivotal measurable property to control and predict sliding friction in supported two-dimensional materials. The experiments demonstrate a reciprocal relationship between friction force per unit contact area and interfacial shear modulus. As a result, the same relationship emerges from simulations with simple friction models, where the atomic layer– substrate interaction controls the shear stiffness and therefore the resulting friction dissipation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

System and method for repeated metal deposition-dewetting steps to form a nano-particle etching mask producing thicker layer of engraved metasurface

A method and system is disclosed for creating an optical component having a spatially controlled refractive index and uniform anti-reflective layer. The method may involve alternately depositing and dewetting two or more thin metal material layers on the substrate to form a mask having a spatially varying nano-particle distribution, and with an increased thickness beyond what could be achieved using a single, thick layer of the same material. The substrate may then be etched, using the mask, to imprint a spatially patterned nanostructure pattern on a surface the substrate in accordance with the mask.

Feigenbaum, Eyal↗