Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radiality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

X-ray spectrographs using radial groove gratings

A high efficiency spectrograph design for the EUV and soft X rays is presented. This grazing incidence system uses a plane surface reflection grating with rulings that are radial, like the spokes of a wheel. The grating is placed in a beam of light that is converging to a focus. The single reflection off the grating is in the conical diffraction mount ensuring maximum performance from the system. Aberrations and performance levels are discussed. The gratings can be manufactured with existing ruling engines. Sample applications to an X-ray monochromator and an EUV stellar spectrograph are discussed.

Cash, W. C., Jr.↗
NASA NTRS1984

Transient behavior of a flare-associated solar wind. I - Gas dynamics in a radial open field region

A numerical investigation is conducted into the way in which a solar wind model initially satisfying both steady state and energy balance conditions is disturbed and deformed, under the assumption of heating that correspoonds to the energy release of solar flares of an importance value of approximately 1 which occur in radial open field regions. Flare-associated solar wind transient behavior is modeled for 1-8 solar radii. The coronal temperature around the heat source region rises, and a large thermal conductive flux flows inward to the chromosphere and outward to interplanetary space along field lines. The speed of the front of expanding chromospheric material generated by the impingement of the conduction front on the upper chromosphere exceeds the local sound velocity in a few minutes and eventually exceeds 100 million cm/sec.

Nagai, F.↗
NASA NTRS1984

Large scale temporal and radial gradients in the IMF - Helios 1, 2, ISEE-3, and Pioneer 10, 11

Recent investigations using measurements at 1 AU have discovered three types of long term variation in the interplanetary magnetic field: solar minimum decreases, solar maximum enhancements, and small decreases around solar reversal. In this study the 1972-1982 Helios 1, 2, ISEE-3, and Pioneer 10, 11 observations between 0.3 and 12 AU are examined to further investigate these changes. It was found that all three IMF solar cycle effects are also present in the Helios and Pioneer measurements, confirming that these variations occur throughout the low latitude heliosphere. In addition, the comparison of measurements by identical magnetometers on ISEE-3, Pioneer 10 and Pioneer 11 has revealed a more rapid decrease in IMF intensity than predicted by classical Parker theory. Causes and ramifications of both the long term variations and steeper-than-expected radial gradients in the interplanetary magnetic field are discussed.

Slavin, J. A.↗
NASA NTRS1983

Aerodynamic effects of moveable sidewall nozzle geometry and rotor exit restriction on the performance of a radial turbine

Attention is given to the experimental results obtained with a high work capacity radial inflow turbine of known performance, whose baseline configuration was modified to accept a variety of movable nozzle sidewall, diffusing or accelerating rotor inlet ramp, and rotor exit restriction ring combinations. The performance of this variable geometry turbine was measured at constant speed and pressure ratio for 31 different test configurations, yielding test data over a nozzle area range from 50 to 100 percent of maximum depending on the movement of the nozzle assembly's forward and rearward sidewalls. Performance comparisons with data for a variable stagger angle vane concept indicate the present system's viability.

Rogo, C.↗
NASA NTRS1983

Composite casting/bonding construction of an air-cooled, high temperature radial turbine wheel

A composite casting/bonding technique has been developed for the fabrication of a unique air-cooled, high temperature radial inflow turbine wheel design applicable to auxilliary power units with small rotor diameters and blade entry heights. The 'split blade' manufacturing procedure employed is an alternative to complex internal ceramic coring. Attention is given to both aerothermodynamic and structural design, of which the latter made advantageous use of the exploration of alternative cooling passage configurations through CAD/CAM system software modification.

Hammer, A. N.↗
NASA NTRS1984

Response of long shallow cylindrical panels to radial line loads

The large displacement static response of shallow orthotropic panels subjected to lateral loading is examined both theoretically and experimentally. The panels are circular cylindrical open shells which are also thin and long. The straight edges are simply supported at a fixed distance apart, and the curved edges are free. The lateral load is a spatially uniform line load acting along the generator direction of the cylinder, and is directed radially inward toward the center of curvature. The load induces a circumferential thrust, and the panel can, and does, snap-through to an inverted configuration at the buckling load. The effect of load position on the response is also examined. The test panels discussed in the paper are /(90/0)3/S graphite-epoxy laminates. Nominal dimensions are a radius of 60 in., a thickness of 0.060 in., and an arc length of 12 in. Very good agreement between theory and experiment is achieved.

Johnson, E. R.↗
NASA NTRS1984

Relationship of dusk sector radial electric field to energy dispersion at the inner edge of the electron plasma sheet

It is shown that, by assuming that the magnetospheric particle boundaries are the result of steady state convection, the electron boundaries in the dusk sector are essentially sensitive to the local, not the global, electric field configuration. A simple, direct relationship is obtained between the dusk sector radial electric field and the inner edge of electron boundaries at various energies.

Horwitz, J. L.↗
NASA NTRS1984

Radial gradient of cosmic ray intensity from a comparative study of data from Voyager 1 and 2 and IMP 8

The IMP 8 satellite and Voyager 1 and 2 space probes obtained cosmic ray measurements during the late 1977 to mid-1982 period. Comparisons of 27-day averages of the data show that a positive radial intensity gradient existed on the average during this period, and that the cosmic ray intensity decrease toward solar maximum in 1980-1981 proceeds in a stepwise fashion. The cosmic ray minimum reached in late 1980/early 1981 appears almost simultaneously at 1 AU and at 10 AU, with and without propagation time delay effects, between IMP 8 and the Voyager spacecraft. These data are generally consistent with a heliolatitudinal gradient of 0 + or - 1 percent/deg. Attention is given to the implications of these results in the overall context of cosmic ray modulation theory.

Venkatesan, D.↗
NASA NTRS1984

Performance of a high-work low aspect ratio turbine tested with a realistic inlet radial temperature profile

Experimental results are presented for a 0.767 scale model of the first stage of a two-stage turbine designed for a high by-pass ratio engine. The turbine was tested with both uniform inlet conditions and with an inlet radial temperature profile simulating engine conditions. The inlet temperature profile was essentially mixed-out in the rotor. There was also substantial underturning of the exit flow at the mean diameter. Both of these effects were attributed to strong secondary flows in the rotor blading. There were no significant differences in the stage performance with either inlet condition when differences in tip clearance were considered. Performance was very close to design intent in both cases. Previously announced in STAR as N84-24589

Stabe, R. G.↗
NASA NTRS1984

Transient thermal stresses in a reinforced hollow disk or cylinder containing a radial crack

The transient thermal stress problem in a hollow cylinder or a disk containing a radial crack is considered. It is assumed that the cylinder is reinforced on its inner boundary by a membrane which has thermoelastic constants different than those of the base material. The transient temperature, thermal stresses and the crack tip stress intensity factors are calculated in a cylinder which is subjected to a sudden change of temperature on the inside surface. The results are obtained for various dimensionless parameters and material constants. The special cases of the crack terminating at the cylinder-membrane interface and of the broken membrane are separately considered and some examples are given.

Tang, R.↗
NASA NTRS1985

Numberical simulation of the effects of radially injected barium plasma in the ionosphere

The morphology of the ion cloud in the radial shaped charge barium injection was studied. The shape of the ion cloud that remains after the explosive products and neutral barium clears away was examined. The ion cloud which has the configuration of a rimless wagon wheel is shown. The major features are the 2.5 km radius black hole in the center of the cloud, the surrounding ring of barium ion and the spokes of barium ionization radiating away from the center. The cloud shows no evolution after it emerges from the neutral debris and it is concluded that it is formed within 5 seconds of the event. A numerical model is used to calculate the motion of ions and electrons subject to the electrostatic and lorenz forces.

Swift, D. W.↗
NASA NTRS1985

Radial and latitudinal gradients of anomalous oxygen during 1977 - 1985

The radial gradient of anomalous O remained constant during 1977 to 85 at approximately 10 to 15%/AU although the intensity changes by more than a factor of 100. These results can be used to deduce that most of the modulation of the intensities of these particles is occurring beyond 27 AU. Evidence for a latitudinal gradient of approximately +3%/degree at low energies (7.1 to 10.6 MeV/nucl) was also found.

Webber, W. R.↗
NASA NTRS1985

The galactic gamma-ray distribution and the radial cosmic ray gradient

The radial distribution is derived of gamma ray emissivity and the cosmic ray intensity in the Galaxy using the final SAS-2 results, the recently corrected COS-B results, and recent CO surveys of the Northern and Southern Galactic Hemispheres. In addition to the 5 kpc ring of enhanced emission, there is evidence for spiral features. A strong increase in the cosmic ray flux is found in the inner Galaxy, particularly in the 5 kpc region, in both halves of the plane.

Harding, A. K.↗
NASA NTRS1985

Radial distribution of cosmic ray intensity in the galaxy from gamma-ray data

The radial distributions of Galactic gamma-ray emissivity and cosmic ray intensity are derived by unfolding the SAS2 line flux data. The results show a marked gradient, with the cosmic ray intensity in the region 3,R,7 kpc being 3 to 4 times as much as locally. There is also an indication for a higher gradient for cosmic rays of lower energy.

Goned, A.↗
NASA NTRS1985

Radial and latitudinal gradients of anomalous oxygen during 1977 - 1985

It is found that the radial gradient of anomalous O remains during 1977 to 1985 at approx. 10% to 15%/AU although the intensity changes by more than a factor of 100. These results can be used to deduce that most of the modulation of the intensities of these particles is occurring beyond 27 AU. Evidence is also found for a latitudinal gradient of approx. +3%/degree at low energies (7.1 to 10.6 MeV/nuc).

Webber, W. R.↗
NASA NTRS1985

The cosmic ray interplanetary radial gradient from 1972 - 1985

It is now established that the solar modulation of cosmic rays is produced by turbulent magnetic fields propagated outward by the solar wind. Changes in cosmic ray intensity are not simultaneous throughout the modulation region, thus requiring time dependent theories for the cosmic ray modulation. Fundamental to an overall understanding of this observed time dependent cosmic ray modulation is the behavior of the radial intensity gradient with time and heliocentric distance over the course of a solar modulation cycle. The period from 1977 to 1985 when data are available from the cosmic ray telescopes on Pioneer (P) 10, Voyager (V) 1 and 2, and IMP 8 spacecraft is studied. Additional data from P10 and other IMP satellites for 1972 to 1977 can be used to determine the gradient at the minimum in the solar modulation cycle and as a function of heliocentric distance. All of these telescopes have thresholds for protons and helium nuclei of E 60 MeV/nucleon.

Webber, W. R.↗
NASA NTRS1985

Galactic cosmic ray radial gradients and the anomalous He component near maximum solar modulation and to radii beyond 34 AU from the Sun

Radial gradients for relativistic galactic cosmic rays (E 70 MeV) remained nearly constant at approx. 2.5%/AU from 1978-84, which includes the period of maximum solar modulation in 1981-82. For energies 30-70 MeV/n, gradients decreased at solar maximum to values of 1%/AU (protons) and 4%/AU (helium), and appear to be increasing again in 1983-84 toward the values found for solar minimum. The anomalous helium component has not reappeared, either at 1 AU or at Pioneer 10 at R 34 AU.

Mckibben, R. B.↗
NASA NTRS1984

The effect of line-tying on the radiative MHD stability of coronal plasmas with radial pressure profile

The role of photospheric line-tying, i.e., solar coronal loop structures, was investigated in terms of the effect on radiative modes and the influence that different radial pressure profiles exert on the effects of line-tying on radiative MHD stability. Energy is assumed dissipated by heat conduction and radiation and zero- and first-order solutions are obtained for the radiative time scales. Line-tying is a magnetic tension in the zero-order MHD mode and produces stability. Heat conduction occurs along bent field lines in first-order MHD modes when plasmas cross the field lines. Irradiated cool-core loops can experience MHD instabilities in the cylinder center, while line-tying can stabilize the plasma in the surrounding hot medium. Line-tying also adds stability to magnetosonic and condensation modes.

An, C.-H.↗