Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Computed lateral rate and acceleration power spectral response of conventional and STOL airplanes to atmospheric turbulence

Power-spectral-density calculations were made of the lateral responses to atmospheric turbulence for several conventional and short take-off and landing (STOL) airplanes. The turbulence was modeled as three orthogonal velocity components, which were uncorrelated, and each was represented with a one-dimensional power spectrum. Power spectral densities were computed for displacements, rates, and accelerations in roll, yaw, and sideslip. In addition, the power spectral density of the transverse acceleration was computed. Evaluation of ride quality based on a specific ride quality criterion was also made. The results show that the STOL airplanes generally had larger values for the rate and acceleration power spectra (and, consequently, larger corresponding root-mean-square values) than the conventional airplanes. The ride quality criterion gave poorer ratings to the STOL airplanes than to the conventional airplanes.

Lichtenstein, J. H.↗
NASA NTRS1973

Measurements of surface-pressure fluctuations on the XB-70 airplane at local Mach numbers up to 2.45

Measurements of surface-pressure fluctuations were made at two locations on the XB-70 airplane for nine flight-test conditions encompassing a local Mach number range from 0.35 to 2.45. These measurements are presented in the form of estimated power spectral densities, coherence functions, and narrow-band-convection velocities. The estimated power spectral densities compared favorably with wind-tunnel data obtained by other experimenters. The coherence function and convection velocity data supported conclusions by other experimenters that low-frequency surface-pressure fluctuations consist of small-scale turbulence components with low convection velocity.

Lewis, T. L.↗
NASA NTRS1994

Thin shell formation in radiative shocks. 1: Supernova remnants in low-density media

This paper explores the onset of thin-shell formation in interstellar shocks associated with supernova explosions. We outline a simple but useful scheme that indicates the time at which thin shell formation begins for supernova remnants (SNRs) evolving in a range of interstellar environments, extending the previous analytical models to arbitrary power-law density media. The result depends on the gas cooling properties and the shock velocity and radius. This is then applied to the specific case of SNRs in low-density media. The procedure for defining the time for the onset of shell formation, t(sub sf), equates the value of the adiabat, kappa = p/rho(exp gamma), to zero using the known time dependence of the shock radius and velocity. For the case of a power-law density ambient medium of the form rho(r) = Br(exp -omega), it is found that shell formation can be prevented when the ambient density drops faster than a critical rate. For a cooling function of the form Lambda = Lambda(sub 0) tau(exp beta), with beta = -0.5 (appropriate for line cooling), shell formation never occurs for omega greater than or equal to 9/5. The shell formation time is then computed for spherical shocks in a power-law density medium. For omega = 0, the onset of shell formation is found to be at t(sub sf) approx. equal to 2.87 x 10(exp 4) E51(exp 3/14) n(sub 0 exp -4.7) yr, which agrees well with previous estimates derived by other means. We compare the analytical shell formation time with the results of detailed numerical models for omega = 0 and three different ambient densities and find good agreement. The extension of the criterion for the onset of thin shell formation using the ratio of cooling to swept-up column density is also described. This method provides a useful approximation for cases when the exact solution is not known.

Franco, Jose↗
NASA NTRS2008

Digital Receiver Phase Meter

The software of a commercially available digital radio receiver has been modified to make the receiver function as a two-channel low-noise phase meter. This phase meter is a prototype in the continuing development of a phase meter for a system in which radiofrequency (RF) signals in the two channels would be outputs of a spaceborne heterodyne laser interferometer for detecting gravitational waves. The frequencies of the signals could include a common Doppler-shift component of as much as 15 MHz. The phase meter is required to measure the relative phases of the signals in the two channels at a sampling rate of 10 Hz at a root power spectral density <5 microcycle/(Hz)1/2 and to be capable of determining the power spectral density of the phase difference over the frequency range from 1 mHz to 1 Hz. Such a phase meter could also be used on Earth to perform similar measurements in laser metrology of moving bodies. To illustrate part of the principle of operation of the phase meter, the figure includes a simplified block diagram of a basic singlechannel digital receiver. The input RF signal is first fed to the input terminal of an analog-to-digital converter (ADC). To prevent aliasing errors in the ADC, the sampling rate must be at least twice the input signal frequency. The sampling rate of the ADC is governed by a sampling clock, which also drives a digital local oscillator (DLO), which is a direct digital frequency synthesizer. The DLO produces samples of sine and cosine signals at a programmed tuning frequency. The sine and cosine samples are mixed with (that is, multiplied by) the samples from the ADC, then low-pass filtered to obtain in-phase (I) and quadrature (Q) signal components. A digital signal processor (DSP) computes the ratio between the Q and I components, computes the phase of the RF signal (relative to that of the DLO signal) as the arctangent of this ratio, and then averages successive such phase values over a time interval specified by the user.

Marcin, Martin↗
NASA NTRS1973

Computer enhancement of radiographs

Examination of three relevant noise processes and the image degradation associated with Marshall Space Flight Center's (MSFC) X-ray/scanning system was conducted for application to computer enhancement of radiographs using MSFC's digital filtering techniques. Graininess of type M, R single coat and R double coat X-ray films was quantified as a function of density level using root-mean-square (RMS) granularity. Quantum mottle (including film grain) was quantified as a function of the above film types, exposure level, specimen material and thickness, and film density using RMS granularity and power spectral density (PSD). For various neutral-density levels the scanning device used in digital conversion of radiographs was examined for noise characteristics which were quantified by RMS granularity and PSD. Image degradation of the entire pre-enhancement system (MG-150 X-ray device; film; and optronics scanner) was measured using edge targets to generate modulation transfer functions (MTF). The four parameters were examined as a function of scanning aperture sizes of approximately 12.5 25 and 50 microns.

Dekaney, A.↗
NASA NTRS1973

Remote sensing of stream flow rates - Correlation of meander and discharge spectra

Results of a study of river meander patterns and discharges, in which attempt was made to correlate the discharge spectrum of a river with the river meander power spectrum determined from aerial and satellite imagery. Some significant characteristics of both the discharge and the meander spectra have been discovered. Discharge frequency spectra based on long-term records of daily streamflow are found to have an inverse power-law dependence on discharge. This is shown to reflect the short-term decay of individual floods which are found to have an inverse power-law dependence on time. Meander power spectra for a number of river reaches, digitized from aerial photography, also show significant structure, the power spectral density having an inverse power-law dependence on wave number over one or more portions of the spectrum with breaks in the spectra at characteristic wave numbers. A number of examples of typical discharge and meander spectra are shown.

Lingenfelter, R. E.↗
NASA NTRS1974

Magnetic measurements in model experiments

Plasma parameters for modeling of the interaction between the solar wind and the earth's magnetic field are selected on the limited modeling principle (plasma velocity 3 x 10 to the 7th power cm/sec, density 10 to the 13th power cm/3, electron temperature approximately 15 eV). Measurements were made with magnetic probes capable of developing all 3 components inside the magnetic field. The resulting magnetic field charts indicate that a neutral layer forms on the night side in the model experiments. A magnetosphere free of plasma streams is established on the daytime side. A shock wave forms on the boundary of the magnetosphere, its width c/omega sub 0 in accordance with theory, where omega sub 0 is the total Langmuir width.

Dubinin, E. M.↗
NASA NTRS1977

Fluctuating loads on the flap surfaces of an externally-blown-flap configuration

An experimental program to obtain the fluctuating loads on the surfaces of a triple-slotted externally-blown-flap powered-lift STOL configuration was conducted. A large model of a wing/flap system and a TF-34 medium bypass ratio engine was investigated. Measurements of the fluctuating pressure, static pressure, and surface temperature resulting from the jet impingement were obtained at several locations on the surfaces of the second and third flaps. Fluctuating pressure data include overall level, power-spectral density (PSD), cross-correlation coefficient, coherency, and phase angle of the cross power-spectral density. These data indicate that more than one mechanism contributes to the fluctuating pressure levels on the flaps. In the immediate area above the intersection of the engine centerline and the flap, low frequency pressures dominate the overall fluctuating pressure levels. In other areas, such as below this intersection and outboard on the flaps, the PSD curve reaches a peak value at a Strouhal number ranging from 0.22 to 0.45.

Schoenster, J. A.↗
NASA NTRS1992

Studies on spectral analysis of randomly sampled signals: Application to laser velocimetry data

Spectral analysis is very useful in determining the frequency characteristics of many turbulent flows, for example, vortex flows, tail buffeting, and other pulsating flows. It is also used for obtaining turbulence spectra from which the time and length scales associated with the turbulence structure can be estimated. These estimates, in turn, can be helpful for validation of theoretical/numerical flow turbulence models. Laser velocimetry (LV) is being extensively used in the experimental investigation of different types of flows, because of its inherent advantages; nonintrusive probing, high frequency response, no calibration requirements, etc. Typically, the output of an individual realization laser velocimeter is a set of randomly sampled velocity data. Spectral analysis of such data requires special techniques to obtain reliable estimates of correlation and power spectral density functions that describe the flow characteristics. FORTRAN codes for obtaining the autocorrelation and power spectral density estimates using the correlation-based slotting technique were developed. Extensive studies have been conducted on simulated first-order spectrum and sine signals to improve the spectral estimates. A first-order spectrum was chosen because it represents the characteristics of a typical one-dimensional turbulence spectrum. Digital prefiltering techniques, to improve the spectral estimates from randomly sampled data were applied. Studies show that the spectral estimates can be increased up to about five times the mean sampling rate.

Sree, David↗
NASA NTRS1988

Densities of some molten fluoride salt mixtures suitable for heat storage in space power applications

Liquid densities were determined for a number of fluoride salt mixtures suitable for heat storage in space power applications, using a procedure that consisted of measuring the loss of weight of an inert bob in the melt. The density apparatus was calibrated with pure LiF and NaF at different temperatures. Density data for safe binary and ternary fluoride salt eutectics and congruently melting intermediate compounds are presented. In addition, a comparison was made between the volumetric heat storage capacity of different salt mixtures.

Misra, Ajay K.↗
NASA NTRS1973

Full scale hover test of a 25 foot tilt rotor

The tilt rotor underwent a hover performance test on the Aero Propulsion Laboratory whirl stand at Wright-Patterson Air Force Base. The maximum thrust over density ratio measured at the design tip speed of 740 feet per second was 10,016 pounds. This occurred when the power over density ratio was 1721 horsepower. At the hover overspeed rpm, the thrust and power, over density ratio, were 11,008 pounds and 1866 horsepower. During the test, the maximum measured thrust coefficient was 0.177, and the rotor figure of merit exceeded 0.81. Measured lifting efficiency was 8.35 pounds per horsepower at the thrust a 13,000-pound aircraft would require for hover at sea level on a standard day. No effect of compressibility on performance is discernible in the test results (the range of tip Mach numbers tested was 0.55 to 0.71).

Helf, S.↗
NASA NTRS2004

Hybrid Power Management Program Evaluated Fuel Cell/Ultracapacitor Combinations and Developed Other New Applications

In fiscal year 2003, the continuation of the Hybrid Power Management (HPM) Program through NASA Glenn Research Center's Commercial Technology Office resulted in several new successful applications of this pioneering technology. HPM is the innovative integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications. The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The advanced power devices include ultracapacitors, fuel cells, and photovoltaics. HPM has extremely wide potential, with applications from nanowatts to megawatts--including power generation, transportation systems, biotechnology systems, and space power systems. HPM has the potential to significantly alleviate global energy concerns, improve the environment, and stimulate the economy. Fuel cells provide excellent efficiency and energy density, but do not have good power density. In contrast, ultracapacitors have excellent power density and virtually unlimited cycle life. To improve the power density of the fuel cell, the combination of fuel cells and ultracapacitors was evaluated.

Eichenberg, Dennis J.↗
NASA NTRSDate not supplied

Comparison of Ring Diagrams Based on the Doppler Shifts of Synthetic Data Obtained with Bisector Method and SDO/HMI Pipeline

Ring diagrams are cross-sections of three-dimensional spatiotemporal power spectra of solar oscillations. The rings reveal information about sub-surface flows and represent an important tool for helioseismology. Ring diagrams can be constructed using Doppler velocity or intensity maps of spectral lines. How the velocities are computed is an important factor for accuracy of information we can retrieve on subsurface flows. In our work, the ring diagrams are generated from Doppler shift data of synthesized Fe I 6173 Å line. We compare ring diagrams computed by two methods–HMI line-of-sight pipeline and the bisector of Fe line. Fe I line is synthesized for StellarBox 3D Radiative hydrodynamic simulations under LTE assumption. We aim to answer the following questions: 1.How do power spectra obtained from velocities computed with the HMI pipeline and bisector of the Fe I 6173Å compare? 2.How do the power spectral density retrieved with each method vary with heliocentric angle? 3.What is the effect of changing resolution on the power spectral density in ring diagrams obtained with the two methods?

SMD↗
NASA NTRS1972

Correlation techniques and measurements of wave-height statistics

Statistical measurements of wave height fluctuations have been made in a wind wave tank. The power spectral density function of temporal wave height fluctuations evidenced second-harmonic components and an f to the minus 5th power law decay beyond the second harmonic. The observations of second harmonic effects agreed very well with a theoretical prediction. From the wave statistics, surface drift currents were inferred and compared to experimental measurements with satisfactory agreement. Measurements were made of the two dimensional correlation coefficient at 15 deg increments in angle with respect to the wind vector. An estimate of the two-dimensional spatial power spectral density function was also made.

Guthart, H.↗
NASA NTRS1987

Quasi-Lagrangian measurements of density surface fluctuations and power spectra in the stratosphere

Pressure and temperature data from eight superpressure balloon flights at 26 km in the southern hemisphere stratosphere are analyzed. The balloons, which float on a constant density surface, travel steadily westward during summer and eastward during winter, as expected from local climatology. Two types of fluctuations are observed: neutral buoyancy oscillations (NBO) of around 4 min, and 0.1- to 1-hour oscillations that are characterized as small-amplitude density surface fluctuations. Lapse rates and densities are calculated and found to agree well with the expected values. Examples of wave damping and simultaneous fluctuation at two nearby balloons are presented. Spectral analysis is performed clearly showing the NBO and that the majority of the power is in the mesoscale range. Spectral slopes of power versus frequency are measured to be on the average -2.18 + or - 0.24 for pressure and -1.72 + or - 0.24 for temperature. These slopes are compared to the predictions of turbulence theories and the theory of a universal gravity wave spectrum.

Quinn, Elizabeth P.↗
NASA NTRS1997

Temporal and spectral properties of Comptonized radiation

Relationships are found between the temporal and spectral properties of radiation Compontonized in an extended atmosphere associated with compact accreting sources. It is demonstrated that the power spectrum density imposes constraints on the atmosphere's scale and profile. It is indicated that the slope and low frequency break of the power spectrum density are related to the Thomson depth of the atmosphere and the radius of its physical size, respectively. This relationship allows an independent estimate to be made of the accreting matter Thomson depth. The temporal properties of the high and low state of black hole sources are discussed.

Kazanas, Demos↗
NASA NTRS1996

(abstract) An All Sky Cirrus Confusion Noise Map for WIRE

The Wide Field Infrared Explorer (WIRE) is a Small Explorer (SMEX) satellite scheduled for launch in 1998 which will carry out a sky survey of at least 100 square degrees in the wavelength regions of 9-15(micro)m and 21-27(micro)m with spatial resolution of approximately 20 arcsec and sensitivity exceeding 0.6mJy. At this sensitivity level WIRE observations can be seriously affected by the confusion noise contribution from the infrared cirrus emission, so the WIRE survey must be planned with some knowledge of the expected level of cirrus confusion. Production of a cirrus confusion noise map with 0.5 degree resolution based on the spatial power spectral density of the cirrus emission in the IRAS ISSA data is in progess using the method described by Gauthier, et al. Spectrally resolved power spectra density data is obtained from the ISSA maps with a wavelet transform technique.

Wide Field Infrared Explorer WIRE infrared sky sur↗
NASA NTRS1993

Spectral study of Venus global topography and geoid from Magellan and PVO data

An analysis of newly available global harmonic models for topography and geoid on Venus was conducted. It was found that the power spectral density for Venus topography has a power law dependence on wave-number characteristic of Brown Noise, similar to what is found for the Earth. However, the Venus topography spectrum presents a rollover at lower degree (l = 3) than is observed for the Earth spectrum and has smaller amplitudes than that of the Earth's. The Venus geoid also obeys a power law relationship, at least for small values of l, but with a smaller slope and more power (for l greater than 3) than the Earth geoid.

Kucinskas, A. B.↗