Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “portions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

An investigation of drag reduction for tractor trailer vehicles with air deflector and boattail

A wind tunnel investigation was conducted to determine the influence of several physical variables on the aerodynamic drag of a trailer model. The physical variables included: a cab mounted wind deflector, boattail on trailer, flow vanes on trailer front, forced transition on trailer, and decreased gap between tractor and trailer. Tests were conducted at yaw angles (relative wind angles) of 0, 5, 10, 20, and 30 degrees and Reynolds numbers of 3.58 x 10 to the 5th power 6.12 x 10 to the 5th power based upon the equivalent diameter of the vehicles. The wind deflector on top of the cab produced a calculated reduction in fuel consumption of about 5 percent of the aerodynamic portion of the fuel budget for a wind speed of 15.3 km/hr (9.5 mph) over a wind angle range of 0 deg to 180 deg and for a vehicle speed of 88.5 km/hr (55 mph). The boattail produced a calculated 7 percent to 8 percent reduction in fuel consumption under the same conditions. The decrease in gap reduced the calculated fuel consumption by about 5 percent of the aerodynamic portion of the fuel budget.

Muirhead, V. U.↗
NASA NTRS1980

Phase-angle controller for Stirling engines

An actuator includes a restraint link adapted to be connected with a pivotal carrier arm for a force transfer gear interposed between the crankshaft for an expander portion of a Stirling engine and a crankshaft for the displacer portion of the engine. The restraint link is releasably trapped hydraulic fluid for selectively establishing a phase angle relationship between the crankshaft. A second embodiment incorporates a hydraulic coupler for use in varying the phase angle of gear-coupled crank fpr a Stirling engine whereby phase angle changes are obtainable.

Mcdougal, A. R.↗
NASA NTRS1980

Pressure control valve

A control valve is provided which is adapted to be connected between a pressure source, such as a vacuum pump, and a pressure vessel so as to control the pressure in the vessel. The valve comprises a housing having a longitudinal bore which is connected between the pump and vessel, and a transversely movable valve body which controls the air flow through an air inlet in the housing. The valve body includes cylindrical and conical shaped portions which cooperate with reciprocally shaped portions of the housing to provide flow control. A filter in the air inlet removes foreign matter from the air. The bottom end of the valve body is screwed into the valve housing control knob formed integrally with the valve body and controls translation of the valve body, and the opening and closing of the valve.

Lambson, K. H.↗
NASA NTRS1980

Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 3, appendix B: State of the art, trends, and potential growth of selected DSG technologies

Present and future relatively small (30 MW) energy systems, such as solar thermal electric, photovoltaic, wind, fuel cell, storage battery, hydro, and cogeneration can help achieve national energy goals and can be dispersed throughout the distribution portion of an electric utility system. Based on current projections, it appears that dispersed storage and generation (DSG) electrical energy will comprise only a small portion, from 4 to 10 percent, of the national total by the end of this century. In general, the growth potential for DSG seems favorable in the long term because of finite fossil energy resources and increasing fuel prices. Recent trends, especially in the institutional and regulatory fields, favor greater use of the DSGs for the future.

Source record↗
NASA NTRS1980

Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 5, appendix D: Cost-benefit considerations for providing dispersed storage and generation for electric utilities

Cost benefit considerations are extremely important in obtaining the acceptance of dispersed storage and generation (DSG) by the electric utilities. These considerations involved somewhat different economic analyses depending on whether the generation is utility, customer, or combined ownership. It is necessary to get acceptance of more easily understood methods for evaluating the economics of DSG because much of the benefits of DSG may accrue in the generation and transmission portions of the utility system while the costs tend to be centered in the distribution portion of that system. The influence of factors, such as reliability, capital costs, and other economic measures were also investigated.

Source record↗
NASA NTRS1978

Infrared Imagery of Shuttle (IRIS). Task 2

An opto-electronic breadboard of 10 channels of the IR temperature measuring system was produced as well as a scaled up portion of the tracking system reticle in order to verify Task 1 assumptions. The breadboards and the tests performed on them are described and both raw and reduced data are presented. Tests show that the electronics portion of the imaging system will provide a dc to 10,000 Hz bandwidth that is flat and contributes no more than 0.4% of full-scale uncertainty to the measurement. Conventional packaging is adequate for the transresistance amplifier design. Measurement errors expected from all sources tested are discussed.

Chocol, C. J.↗
NASA NTRS1981

Interstellar abundance determination using IUE data

Analysis of the silicon interstellar abundances was made for more heavily reddened lines of sight than were accessible to the Copernicus satellite. Silicon rarely had accurate column densities determined from Copernicus data because the available lines all lie on the flat portion of the curve of growth. With International Ultraviolet Explorer (IUE) it is possible to reach color excesses of E(B-V) approximately 0.5-0.7, and in addition obtain data on the weak SiII line at 1808 A, so that a wide range of oscillator strengths is available. The lower resolving power of the IUE causes difficulties in that several of the SiII lines are blended with strong lines of other species. Data on the lines of sight analyzed suggested that some of the absorption lines fall on the damped portion of the curve of growth, implying that silicon may not be as highly depleted as expected.

Joseph, C. L.↗
NASA NTRS1981

Application of the mixing-reaction in series model to NO/x/-O3 plume chemistry

The mixing-reaction in series model developed by Ghodsizadem (1978) is successfully applied to the study of NO oxidation in the near-source portion of the Potomac Electric Company's Morgantown, Maryland power plant plume. The model employs a single parameter. With initial conditions consistent with the plume data measured by Davis et al. (1974) and utilizing the mixing parameter estimated from the study by Shu et al. (1978), the predicted temporal profiles of the ratio of the concentration of NO2 to NO, of NO2 to NO plus NO2, in-plume concentrations of NO and O3, and fraction of NO remaining are consistent with field study data. In addition, the model predicts large deviations from the photostationary state in the near-source portion of the plume, also consistent with field study data. In the far field region of this plume (t greater than approximately 20 min), the mixing processes are essentially complete over much of the plume cross-section.

Carmichael, G. R.↗
NASA NTRS1981

Saturn's rings - Azimuthal variations, phase curves, and radial profiles in four colors

Four-color photographic photometry, at effective wavelengths of 5900, 5350, 4150, and 3560 A, obtained during the 1977, 1978, and 1979 Saturn apparitions, were analyzed to determine the ring brightness as a function of wavelength, solar phase angle, ring particle orbital phase (the azimuthal effect), declination of the earth relative to the ring plane (tilt effect), and radial distance from Saturn. Data were obtained using the International Planetary Patrol network when the ring tilt angle B was approximately 16.5, 11.5, and 6 deg, respectively. From the approximately 40,000 original images, 364 were scanned and digitized, along with corresponding calibration exposures. The smearing correction technique used achieved better signal-to-noise by utilizing such constraints as the known width of Cassini's Division on the major axis. The most important observational results were summarized, and included the following: the azimuthal brightness variations for the brighter portion of ring A increased as the ring tilt decreased from B = 26 deg to less than 16 deg, reaching the order of + or 20% with respect to the ansae; they are not detectable for ring B or the outer portion of ring A.

Thompson, W. T.↗
NASA NTRS1982

A computer program for wing subsonic aerodynamic performance estimates including attainable thrust and vortex lift effects

Numerical methods incorporated into a computer program to provide estimates of the subsonic aerodynamic performance of twisted and cambered wings of arbitrary planform with attainable thrust and vortex lift considerations are described. The computational system is based on a linearized theory lifting surface solution which provides a spanwise distribution of theoretical leading edge thrust in addition to the surface distribution of perturbation velocities. The approach used relies on a solution by iteration. The method also features a superposition of independent solutions for a cambered and twisted wing and a flat wing of the same planform to provide, at little additional expense, results for a large number of angles of attack or lift coefficients. A previously developed method is employed to assess the portion of the theoretical thrust actually attainable and the portion that is felt as a vortex normal force.

Carlson, H. W.↗
NASA NTRS1982

Method of bonding plasticized elastomer to metal and articles produced thereby

Plasticized elastomer was securely bonded to a metal surface by interposing between the adhesive-coated metal surface and the elastomer sheet of material obtained by combining adhesive with a portion of the elastomer that was treated to remove plasticizers therefrom and heating the assembly in a mold under pressure. The sheet material is made up by dissolving a portion of the plasticized elastomer in an organic solvent, casting the solution, exposing it to a vacuum to remove the solvent and plasticizers, dissolving the deplasticized material in liquid adhesive and casting and drying the resulting liquid.

White, W. T.↗
NASA NTRS1981

Annular wing

An annular wing particularly suited for use in supporting in flight an aircraft characterized by the absence of directional stabilizing surfaces is described. The wing comprises a rigid annular body of a substantially uniformly symmetrical configuration characterized by an annular positive lifting surface and cord line coincident with the segment of a line radiating along the surface of an inverted truncated cone. A decalage is established for the leading and trailing semicircular portions of the body, relative to instantaneous line of flight, and a dihedral for the laterally opposed semicircular portions of the body, relative to the line of flight. The direction of flight and climb angle or glide slope angle are established by selectively positioning the center of gravity of the wing ahead of the aerodynamic center along the radius coincident with an axis for a selected line of flight.

Walker, H. J.↗
NASA NTRS1982

Random digital encryption secure communication system

The design of a secure communication system is described. A product code, formed from two pseudorandom sequences of digital bits, is used to encipher or scramble data prior to transmission. The two pseudorandom sequences are periodically changed at intervals before they have had time to repeat. One of the two sequences is transmitted continuously with the scrambled data for synchronization. In the receiver portion of the system, the incoming signal is compared with one of two locally generated pseudorandom sequences until correspondence between the sequences is obtained. At this time, the two locally generated sequences are formed into a product code which deciphers the data from the incoming signal. Provision is made to ensure synchronization of the transmitting and receiving portions of the system.

Doland, G. D.↗
NASA NTRS1982

Experimental evaluation of the concept of supevisory manipulation

A computer-controlled teleoperator system which is based on task-referenced sensor-aided control has been developed to study supervisory manipulation. This system, called SUPERMAN, is capable of performing complicated tasks in real-time by utilizing the operator for high-level functions related to the unpredictable portions of a task, while the subordinate machine performs the more well-defined subtasks under human supervison. To determine whether supervisory control schemes such as these offer any advantage over manual control under real-time conditions, a number of experiments involving both simple and complicated tasks were performed. Six representative tasks were chosen for the study: (1) obtaining a tool from a rack, (2) returning the tool to the rack, (3) removing a nut, (4) placing samples in a storage bin, (5) opening and closing a valve, and (6) digging with a shovel. The experiments were performed under simulated conditions using four forms of manual control (i.e., switch rate, joystick rate, master-slave position control, and master-slave with force feedback), as well as supervisory control. Through these experiments the effectiveness and quality of control were evaluated on the basis of the time required to complete each portion of the task and the type and number of errors which occurred.

Brooks, T. L.↗
NASA NTRS1981

Numerical simulation of a radially injected barium cloud

Electrostatic two-dimensional numerical simulations of a radially symmetric barium injection experiment demonstrate that ions created by solar UV irradiation are electrostatically bound to the electrons which remain tied to the field lines on which they are created. Two possible instabilities are identified, but neither of them causes the barium plasma cloud to polarize in a way that would permit the plasma to keep up with the neutrals. In a second model, the velocity of the neutrals is allowed to be a function of the azimuthal angle. Here, a portion of the cloud does polarize in a way that allows a portion of the plasma to detach and move outward at the approximate speed of the neutrals. No rapid detachment is found when only the density of the neutrals is given an azimuthal asymmetry.

Swift, D. W.↗
NASA NTRS1981

Status of the microwave power transmission components for the solar power satellite

During the 1970-1980 time period a substantial advance has been made in developing all portions of a microwave power transmission system for the solar power satellite (SPS). The most recent advances pertain to the transmitting portion of the system in the satellite and are based upon experimental observations of the use of the magnetron combined with a passive directional device to convert it into a highly efficient directional amplifier with excellent low-noise properties and potentially very long life. The ability of its microwave output to track a phase reference makes it possible to combine it with many other radiating units to provide a highly coherent microwave beam. The ability of its output to track an amplitude reference while operating from a dc power source with varying voltage makes it possible to eliminate most of the power conditioning equipment that would otherwise be necessary.

Brown, W. C.↗
NASA NTRS1982

Studies of lunar regolith dynamics using measurements of cosmogenic radionuclides in lunar rocks, soils and cores

The present investigation is concerned with two types of measurements. The first deals with the use of Al-26 to define regolith gardening processes which have occurred in the upper portion of the lunar cores that were collected both by the deep drilling and drive tube operations. The second portion of the study involves the use of Mn-53 and Al-26 concentrations to determine the surface exposure histories of individual rocks over the past ten million years. It is found that during the past two million years, 15011 has had a history of simple gardening with an accumulation rate of 2 cm/m.y. The Apollo 15 Station 2 boulder appears to have been in place for about five million years. The 'shadowed' soil (75237) shows a shielding effect of about 40%. The Apollo 16 Station 9 boulder appears to have been in place for about four million years and thus is apparently not related to the South Ray Crater event.

Fruchter, J. S.↗
NASA NTRS1982

The Reiner Gamma Formation - Composition and origin as derived from remote sensing observations

In order to investigate the composition and origin of Reiner Gamma, near-infrared spectra and vidicon images were obtained and interpreted. The 0.40/0.56 micron ratio image shows that the high albedo portion of Reiner Gamma is surrounded by a 'red halo' and the 0.95/0.56 micron image indicates that Reiner Gamma exhibits a strong pyroxene absorption band. Analysis of the near-infrared spectra of various portions of the formation indicated the presence of major amounts of fresh mare basalt. Spectral mixing models demonstrate that the Reiner Gamma spectra can be reproduced by mixing major amounts of local fresh mare material (Reiner K crater) with small amounts of fresh highlands material (Oelbers A crater). No evidence was found for the presence of 'exotic' components (i.e., magnetite, free iron, cometary material). Together with photogeologic considerations, these results suggest that Reiner Gamma is quite young and is composed of a mixture of fresh highland materials with much larger quantities of local mare basalt.

Bell, J. F.↗