Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma jet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Analysis of the Shattered Pellet Injection Fragment Plumes Generated by Machine Specific Shatter Tube Designs

Shattered pellet injector systems have been installed on DIII-D, JET, and KSTAR and used to experimentally determine the effectiveness of the shattered pellet injection (SPI) process in mitigating the deleterious effects of a tokamak plasma disruption. Pellets are fired, and before entering the plasma, strike a bent tube known as a shatter tube causing the pellet to shatter. The process of pellet fragmentation is a chaotic process that can be described in terms of fragment size distribution through a statistical model that incorporates the effects of the pellet material and impact characteristics. In addition to the fragment size distribution, the shatter plume has other characteristics of interest, such as a fragment velocity distribution and temporal mass evolution. The fragment velocity distribution is important because it is needed to accurately model the spread and location of the ablation and the deposition of impurities in the plasma over time. The temporal mass evolution is necessary to determine the time-resolved delivery of mass to the plasma.Due to installation constraints, the shatter tube currently installed on JET has a unique geometry with a modest S-bend followed by a 20-deg bend at the end of the tube. The DIII-D and KSTAR shatter tube design is a simple tube bent through an angle of 20 deg followed by a straight section. The resulting shatter sprays from the JET shatter tube and a 20-deg miter bend shatter tube were experimentally characterized for various pellet materials and speeds. Laboratory testing of these shatter tubes allows for the use of fast cameras to capture the fragment spray traveling through a large vacuum chamber. These high-speed videos of the shatter plumes allow the fragment size distribution, temporal mass evolution, and velocity distribution of the fragments within the plume to be determined. Overall, this paper presents a comparison of the unique geometry of the JET shatter tube to the miter bend geometries used for shattering and some insight into the variables that may be adjusted to produce the optimal shatter spray. The impact of entrained propellant gas on the resulting shatter spray was examined during testing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2007

The Suzaku Observation of the Nucleus of the Radio Loud Active Galaxy Centaurus A: Constraints on Abundances in the Accreting Material

A Suzaku observation of the nucleus of the radio-loud AGN Centaurus A in 2005 has yielded a broadband spectrum spanning 0.3 to 250 keV. The hard X-rays are fit by two power laws, absorbed by columns of 1.5 and 7 x 10(exp 23) per square centimeter. The dual power-laws are consistent with previous suggestions that the powerlaw components are X-ray emission from the sub-pc VLBI jet and from Bondi accretion at the core, or are consistent with a partial covering interpretation. The soft band is dominated by thermal emission from the diffuse plasma and is fit well by a two-temperature VAPEC model, plus a third power-law component to account for scattered nuclear emission, kpc-scale jet emission, and emission from X-ray Binaries and other point sources. Narrow fluorescent emission lines from Fe, Si, S, Ar, Ca and Ni are detected. The width of the Fe Ka line yields a 200 light-day lower limit on the distance from the black hole to the line-emitting gas. K-shell absorption edges due to Fe, Ca, and S are detected. Elemental abundances are constrained via the fluorescent lines strengths, absorption edge depths and the diffuse plasma emission lines. The high metallicity ([Fe/H]=+0.l) of the circumnuclear material compared to that in the metal-poor outer halo suggests that the accreting material could not have originated in the outer halo unless enrichment by local star formation has occurred. Relative abundances are consistent with enrichment from Type II and Ia supernovae.

Markowitz, A.↗
DOE OSTI2022

Magnetic field induced hair structure in the charmonium gluon dissociation

We study the electromagnetic field effect on charmonium gluon dissociation in quark-gluon plasma. With the effective Hamiltonian derived from QCD multipole expansion under an external electromagnetic field, we first solve the two-body Schrödinger equation for a pair of charm quarks with mean field potentials for color and electromagnetic interactions and obtain the charmonium binding energies and wave functions, and then calculate the gluon dissociation cross section and decay width by taking the color electric and magnetic dipole interactions as perturbations above the mean field and employing Fermi’s golden rule. Considering the charmonium deformation in a magnetic field, the discrete Landau energy levels make the dissociation cross section grow hair, and the electric dipole channel is significantly changed, especially for the P -wave states χ c 0 and χ c ± . From our numerical calculation, the magnetic field strength e B = 5 m π 2 already changes the gluon dissociation strongly, which may indicate measurable effects in high-energy nuclear collisions.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2010

Adaptable Holders for Arc-Jet Screening Candidate Thermal Protection System Repair Materials

Reusable holders have been devised for evaluating high-temperature, plasma-resistant re-entry materials, especially fabrics. Typical material samples tested support thermal-protection-system damage repair requiring evaluation prior to re-entry into terrestrial atmosphere. These tests allow evaluation of each material to withstand the most severe predicted re-entry conditions.

Riccio, Joe↗
DOE OSTI2026

Plasma-Assisted Pre-Chamber Ignition System for Highly Dilute Stoichiometric Heavy-Duty Natural Gas Engines (Final Technical Report)

This project explored advanced ignition technologies to significantly enhance efficiency and reduce operating costs for heavy-duty natural gas engines operating at stoichiometric conditions, while meeting ultra-low NOx emission standards. The main goal was to develop and validate a plasma-assisted pre-chamber ignition system that could deliver at least a 2% increase in brake thermal efficiency (BTE) and a 4% decrease in total cost of ownership (TCO) compared to a typical multi-cylinder engine with three-way catalyst aftertreatment, ensuring compatibility with the expected 2027 EPA/CARB regulations. In the first half of the project, the research team concentrated on developing and testing plasma-assisted pre-chamber ignition using nanosecond pulsed discharges. Extensive experiments were conducted in an optically accessible rapid-compression and expansion machine, a constant-volume chamber, and an optical single-cylinder engine. Experiments were coupled with CFD simulations. The work produced unique insights into pre-chamber flame formation, jet ignition, dilution effects, and flame quenching at pressures, temperatures, and dilution levels relevant to engines. Although plasma-assisted ignition showed promise in controlled lab settings, the research also identified fundamental and practical challenges when applying this technology to real engine conditions. Midway through the project, a crucial pivot was made, guided by three key findings. First, the power electronics required for nanosecond plasma discharges were found to be too costly for commercial use, undermining the project’s cost-of-ownership goals. Second, nanosecond plasma ignition was highly sensitive to turbulent flow in the pre-chamber, resulting in lower ignition reliability than traditional spark under engine-like conditions. Third, achieving a truly diffuse low-temperature plasma at high pressures near top dead center was not possible, reducing the anticipated chemical enhancement benefits. These results collectively suggested that continuing with plasma-assisted ignition was unlikely to meet both efficiency and cost objectives. In response, the project shifted focus to a more realistic approach: enhancing traditional spark-based pre-chamber ignition with significantly less spark energy. Using insights gained earlier in the project, the team redesigned the pre-chamber to maintain high dilution tolerance and quick combustion, even with lower ignition energy. Testing confirmed that with optimized pre-chamber design and combustion timing, a lower-energy spark could reliably ignite highly diluted stoichiometric mixtures, reduce burn time, and boost thermal efficiency. Final engine testing and techno-economic analysis verified that this revised approach successfully achieved the project goals. The optimized pre-chamber ignition system provided over a 2% increase in calculated brake thermal efficiency compared to the baseline engine. Notably, the lower ignition energy and simplified hardware reduced component stress, extended maintenance intervals, and lowered the total cost of ownership. When used with stoichiometric operation and traditional three-way aftertreatment, the system remained compatible with near-zero NOx emissions targets without increasing cost or complexity in the emissions control system. In summary, although the project deviated from its initial plasma-assisted ignition idea, the work produced a more practical and commercially viable solution. The results show that precisely optimized, low-energy pre-chamber spark ignition can significantly improve efficiency and reduce overall ownership costs for heavy-duty natural gas engines. This directly aligns with DOE goals for cleaner, more efficient, and cost-effective transportation technologies.

03 NATURAL GAS↗
NASA NTRS2000

Outflows, Jets and Shocks in the Orion Nebula

The rich young cluster of stars associated with the Orion Nebula provides a unique laboratory for the study of plasma phenomena. We see five types of flows and shocks. Photoablation outflow from the proplyds nearest theta (exp 1) Ori C form nearly stationary shocks with the high velocity wind from that star. Microjets, with scales of less than 10 (exp 4) AU, are seen around some 20 low mass stars. Isolated jets, with high velocities and scales of about, 104 AU, are less numerous but common. One also sees the shocks formed when these jets impinge on the ionized nebular gas and the neutral gas in the foreground lid. The final type of object is the stationary shock formed by the interaction from the stellar wind that arises during disk formation with the ambient, gas flowing away from the main body of the nebula.

ODell, C. R.↗
DOE OSTI2025

Basic Physical Processes Involving Dust in Fusion Plasmas

This report presents the main outcomes of our research focused on understanding the behavior and effects of dust particles in fusion plasmas, particularly in the edge regions of tokamaks and stellarators. We conducted computer modeling studies of burst injections of carbon and tungsten dust particles in DIII-D like divertor plasmas. The studies investigated effects of transient influx of the low- and high-Z material plasma contaminants in form of dust on the edge plasma dynamics in a modern mid-size tokamak. We also performed theoretical and computational studies of the forces acting on non-spherical dust grains in magnetized and nonmagnetized plasmas. In addition, we cooperated with General Atomics slag management group on development of DIII-D dust injection experiments to measure trajectories of dust grains in the divertor plasma and compare them with DUSTT code predictions for validation of the dust modeling capabilities. We collaborated with JET experimentalists on evaluation of radiative losses induced by injection of mixed neon-deuterium ice pellets for disruption and run-away electron generation mitigation during thermal and current quench phases. We also cooperated with experimentalists at LHD fusion device (Japan) on modeling support of experiments on injection of boron granules in fusion plasma discharges to assess their dynamics and effectiveness for in situ dynamic wall conditioning.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The role of ETG modes in JET–ILW pedestals with varying levels of power and fuelling

Abstract We present the results of GENE gyrokinetic calculations based on a series of JET–ITER-like-wall (ILW) type I ELMy H-mode discharges operating with similar experimental inputs but at different levels of power and gas fuelling. We show that turbulence due to electron-temperature-gradient (ETGs) modes produces a significant amount of heat flux in four JET–ILW discharges, and, when combined with neoclassical simulations, is able to reproduce the experimental heat flux for the two low gas pulses. The simulations plausibly reproduce the high-gas heat fluxes as well, although power balance analysis is complicated by short ELM cycles. By independently varying the normalised temperature gradients ( ω T e ) and normalised density gradients ( ω n e ) around their experimental values, we demonstrate that it is the ratio of these two quantities η e = ω T e / ω n e that determines the location of the peak in the ETG growth rate and heat flux spectra. The heat flux increases rapidly as η e increases above the experimental point, suggesting that ETGs limit the temperature gradient in these pulses. When quantities are normalised using the minor radius, only increases in ω T e produce appreciable increases in the ETG growth rates, as well as the largest increases in turbulent heat flux which follow scalings similar to that of critical balance theory. However, when the heat flux is normalised to the electron gyro-Bohm heat flux using the temperature gradient scale length L T e , it follows a linear trend in correspondence with previous work by different authors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Comprehensive Analysis of Streaming and Shutdown Dose Rate Experiments at JET with ORNL Fusion Neutronics Workflows

Current experimental fusion systems and conceptual designs of fusion pilot plants (FPPs) are growing in complexity and size. Several radiation metrics are crucial to the safe operation of fusion machines, including neutron flux streaming through openings and the shutdown dose rate (SDDR). Most current designs of advanced experimental fusion systems—and the most probable candidates for FPPs—are based on the tokamak concept, which is prone to neutron streaming through the myriad openings needed for diagnostic and support systems. SDDR is caused by decay gamma rays from radionuclides that become activated by neutrons during the operation of a fusion system that use deuterium-deuterium (DD), tritium-tritium, or deuterium-tritium plasma. Because computational tools have become essential for determining these radiation metrics, they must be validated against reliable and applicable experimental data. Experiments at the Joint European Torus (JET) provide a unique source of experimental data for validating computational tools and nuclear data used to determine SDDR and neutron fluxes in streaming-dominated geometries. Here, this paper presents the comprehensive analysis of the high-performance DD JET SDDR, and streaming experiments performed using Oak Ridge National Laboratory (ORNL) fusion workflows. The computational results were compared with experimental results that consist of online SDDR measurements with ionization chambers and neutron fluence streaming measurements using thermoluminescent detectors. The ratio of calculated-to-experimental SDDR values ranges from 0.6 to 2.5, and the streaming results range from 0.5 to 8.0. Future work will include analyzing the JET 2021 DTE2 campaign alongside the integration of the Shift Monte Carlo transport code into all ORNL fusion neutronics workflows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2016

Hall Thruster Thermal Modeling and Test Data Correlation

The life of Hall Effect thrusters are primarily limited by plasma erosion and thermal related failures. NASA Glenn Research Center (GRC) in cooperation with the Jet Propulsion Laboratory (JPL) have recently completed development of a Hall thruster with specific emphasis to mitigate these limitations. Extending the operational life of Hall thursters makes them more suitable for some of NASA's longer duration interplanetary missions. This paper documents the thermal model development, refinement and correlation of results with thruster test data. Correlation was achieved by minimizing uncertainties in model input and recognizing the relevant parameters for effective model tuning. Throughout the thruster design phase the model was used to evaluate design options and systematically reduce component temperatures. Hall thrusters are inherently complex assemblies of high temperature components relying on internal conduction and external radiation for heat dispersion and rejection. System solutions are necessary in most cases to fully assess the benefits and/or consequences of any potential design change. Thermal model correlation is critical since thruster operational parameters can push some components/materials beyond their temperature limits. This thruster incorporates a state-of-the-art magnetic shielding system to reduce plasma erosion and to a lesser extend power/heat deposition. Additionally a comprehensive thermal design strategy was employed to reduce temperatures of critical thruster components (primarily the magnet coils and the discharge channel). Long term wear testing is currently underway to assess the effectiveness of these systems and consequently thruster longevity.

Hall thruster↗
DOE OSTI2024

Laboratory realization of relativistic pair-plasma beams

Relativistic electron-positron plasmas are ubiquitous in extreme astrophysical environments such as black-hole and neutron-star magnetospheres, where accretion-powered jets and pulsar winds are expected to be enriched with electron-positron pairs. Their role in the dynamics of such environments is in many cases believed to be fundamental, but their behavior differs significantly from typical electron-ion plasmas due to the matter-antimatter symmetry of the charged components. So far, our experimental inability to produce large yields of positrons in quasi-neutral beams has restricted the understanding of electron-positron pair plasmas to simple numerical and analytical studies, which are rather limited. We present the first experimental results confirming the generation of high-density, quasi-neutral, relativistic electron-positron pair beams using the 440 GeV/c beam at CERN’s Super Proton Synchrotron (SPS) accelerator. Monte Carlo simulations agree well with the experimental data and show that the characteristic scales necessary for collective plasma behavior, such as the Debye length and the collisionless skin depth, are exceeded by the measured size of the produced pair beams. Our work opens up the possibility of directly probing the microphysics of pair plasmas beyond quasi-linear evolution into regimes that are challenging to simulate or measure via astronomical observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Plasma gradient effect on direct laser acceleration

The transfer of a high-intensity laser pulse energy to a high-energy electron beam via the direct laser acceleration mechanism is shown to be significantly enhanced through control of the plasma density gradient. Experiments performed using the OMEGA EP facility's high-intensity beams altered the plasma density and gradients by changing the Mach number and the angle of the gas-jet nozzle to the laser axis. When a long density gradient at the rear of the target is used, the total high-energy electron number measured was enhanced by 4.5 times compared to a shorter rear gradient. Complementary two-dimensional simulations, which follow the laser field evolution and the corresponding electron dynamics, strongly support the key trends observed in the experiment. The effect is twofold, the long density gradient provides the longest acceleration distance while it minimizes the formation of the sheath field as the electron beam exits into the vacuum. This study shows the importance of tailoring the plasma density.

Laser plasma interactions↗
DOE OSTI2024

Advancing the understanding of energy-energy correlators in heavy-ion collisions

We investigate the collinear limit of the energy-energy correlator (EEC) in a heavy-ion context. First, we revisit the leading-logarithmic (LL) resummation of this observable in vacuum following a diagrammatic approach. We argue that this route allows to naturally incorporate medium-induced effects into the all-orders structure systematically. As an example, we show how the phase-space constraints imposed by the static medium on vacuum-like emissions can be incorporated into the LL result by modifying the anomalous dimensions. On the fixed-order side, we calculate the $\mathcal{O}$(α s ) expansion of the in-medium EEC for a γ → $q\overline{q}$ splitting with arbitrary kinematics including, for the first time, subleading colour corrections. When comparing this result to previously used approximations in the literature, we find up to $\mathcal{O}$(1) deviations in the regime of interest for jet quenching signatures. Energy loss effects are also quantified and further suppress the EEC at large angles. These semi-analytic studies are complemented with a phenomenological study using the jet quenching Monte Carlo JetMed. Finally, we argue that the imprint of medium-induced effects in energy-energy correlators can be enhanced by using an alternative definition that takes as input Lund primary declusterings instead of particles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

System-size dependence of charged-particle suppression in ultrarelativistic nucleus-nucleus collisions

High-energy partons lose energy while propagating through the hot, strongly interacting medium produced in ultrarelativistic nucleus-nucleus collisions, leading to a suppression of particle production at high transverse momentum (p T ). The dependence of this energy loss on the size of the colliding nuclear system has yet to be firmly established experimentally. This Letter presents a systematic study of charged-particle suppression across four different nucleus-nucleus collision systems using nuclear modification factors (R AA ) measured by the CMS Collaboration at the CERN LHC. Previous CMS measurements of R AA in oxygen-oxygen, xenon-xenon, and lead-lead collisions are recast with identical p T intervals and are complemented by the first measurement of the charged-particle R AA in neon-neon collisions at $\sqrt{S_{NN}}$ = 5.36 Te V . The neon-neon data correspond to an integrated luminosity of 0.76 nb −1 . The R AA in all collision systems examined show similar qualitative trends as a function of p T , but have a magnitude which is ordered with the nucleon number A. The R AA feature a downward slope at low p T , a local minimum at around 5–7 Ge V , and an upward slope with increasing p T . The R AA are also compared in terms of A 1/3 , which is proportional to the nuclear radius. Models including only initial-state nuclear effects fail to reproduce the observed trends, whereas energy loss models reproduce the trends in the region p T > 9.6 Ge V .

CMS↗
DOE OSTI2025

Overview of high-density QCD studies with the CMS experiment at the LHC

We review key measurements performed by CMS in the context of its heavy ion physics program, using event samples collected in 2010-2018 with several collision systems and energies. These studies provide detailed macroscopic and microscopic probes of the quark-gluon plasma (QGP) created at the LHC energies, a medium characterized by the highest temperature and smallest baryon-chemical potential ever reached in the laboratory. Numerous observables related to high-density quantum chromodynamics (QCD) were studied, leading to some of the most impactful and qualitatively novel results in the 40-year history of the field. Using a dedicated high-multiplicity trigger in the first pp run, CMS discovered that small collision systems can exhibit signs of collectivity, a generic phenomenon with significant implications and presently understood to affect essentially all soft physics processes. This observation opened new paths to understand how fluidity and plasma properties emerge in QCD matter as a function of system size. Measurements of jet quenching have reached a completely new level of detail by directly assessing, for the first time, the medium modification of parton showers, as opposed to simply observing leading hadrons or di-hadrons. The first fully reconstructed beauty hadron and heavy-flavor jet nuclear modifications were also measured. The large size of the event samples, the precision of the measurements, and the extension of the probed kinematical phase space, allowed many other hard probes of the QGP medium to be explored in detail, leading to multiple groundbreaking findings. In particular, the seminal measurements of bottomonium suppression patterns answer fundamental questions that have been actively pursued, both theoretically and experimentally, by the community since the mid-1980s. We conclude by outlining the opportunities offered by the continuation of this physics program at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Lasing efficiency of krypton ions in the (8 – 14)-nm band upon pulsed laser excitation

The emission spectra of krypton plasma in the range of 8 – 14 nm upon excitation of a pulsed gas jet by 1.06-mm Nd : YAG laser radiation with a pulse energy of 0.85 J, pulse duration of 5.2 ns, and repetition rate of 10 Hz are investigated. The krypton emission spectrum is a wide (8 – 14 nm) band, peaking at 10.3 nm, which is formed by a series of much narrower lines. The observed lines are identified, and the fraction of laser pulse energy converted into the (8 – 14)-nm emission band and emitted into half-space (2π sr) is determined. The maximum conversion efficiency is found to be 21 %. The expected throughputs of lithographic systems with sources based on Sn, Xe, and Kr ions for different wavelengths, corresponding to the emission peaks of ions of these materials, are compared. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Charm quark evolution in the early stages of heavy-ion collisions

Heavy quarks are predominantly generated at the initial stage of relativistic heavy-ion collisions such that heavy flavor observables have the potential to provide information on the pre-equilibrium medium dynamics. In this study, we investigate the sensitivity of D-meson $R_{AA}$ and $v_2$ to early-time charm quark dynamics in Pb+Pb collisions at $\sqrt{s_{NN}}$=5.02 TeV. We employ the IP-Glasma+MUSIC+UrQMD framework to model the evolution of the bulk medium. Charm quarks are generated using PYTHIA with nuclear parton distribution functions and evolved using Langevin dynamics within MARTINI. We observe that even though there is significant momentum broadening in the earliest stage, D-meson $R_{AA}$ and $v_2$ are only weakly sensitive to pre-equilibrium interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Observation of Charmonium Sequential Suppression in Heavy-Ion Collisions at the Relativistic Heavy Ion Collider

We report measurements of charmonium sequential suppression in Ru+Ru and Zr+Zr collisions at $\sqrt{s_{NN}}$ =200 GeV with the STAR experiment at the Relativistic Heavy Ion Collider (RHIC). The inclusive yield ratio of 𝜓⁡(2⁢S) to J/𝜓 as a function of transverse momentum is reported, along with the centrality dependence of the double ratio, defined as the 𝜓⁡(2⁢S) to J/𝜓 ratio in heavy-ion collisions relative to that in 𝑝 +𝑝 collisions. In the 0–80% centrality class, the double ratio is found to be 0.41±0.10 (stat)±0.03 (syst)±0.02 (ref), lower than unity with a significance of 5.6 standard deviations. This provides experimental evidence that 𝜓⁡(2⁢S) is significantly more suppressed than J/𝜓 in heavy-ion collisions at RHIC. This sequential suppression pattern seems to increase from peripheral to central collisions, but with no significant dependence on the transverse momentum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗